[Arcade PC] Wangan Midnight Maximum Tune 4 - (Dump + Decrypted)

[masterjedi]

13 hours ago, fire10 said:

Yes mate thats the same issue I had get vmworkstation  12 Player version 12.5.9 build 7535481 the same as mine. Also the game is very picky with controllers i think. I tired 2 direct input ones and my xbox 360 joypads I could not get any of them to connect, also make sure you are connected to the internet

i got some connect (all is same package) from the game after using sudo to run game, but after 30 sec the IO error still showing.

sudo LD_PRELOAD=./mt4hasp.so ./WMN4r

[Arcade_mAniaC]

4 hours ago, yaha1234 said:

 

 

 

You dont have Correct Graphic Driver Installed, i had the very same problem which was only resolved with reinstalling of ubuntu 16.04 64-Bit, and verify if you had installed the correct Nvidia Driver by Navigating to System Settings > Software & Updates > Additional Drivers and check if you have GREEN CIRCLE Next to NVIDIA Corportation, I have attached mine for reference, In the meanwhile you can directly copy your Wangan folder which you have right now as it is to the newer installation, this saves time but you do need to install tty0, libs, vmware and others again for the newer installation. This will just save your pain to unpack and Copy updates and crack. Hope this helps!

Modifié le 31 janvier 2018 par Arcade_mAniaC

[Safur]

Il y a 11 heures, pinkimo2 a dit :

J'ai du mal à comprendre ce qu'il se passe sur ce forum, il y a un certain nombre d'habitués qui passent leur temps à tout critiquer en jugeant à l'emporte pièce, toujours de manière tranchée voire violente, souvent sans assez connaitre ce qu'ils jugent pour pouvoir se permettre de juger, encore moins pour être aussi dédaigneux, et ce souvent gratuitement.

Alors non je n'ai pas critiqué gratuitement! Et de façon violente et dédaigneuse quand je dis qu'il a l'air ennuyeux? J'ai vu une bonne partie de la vidéo de celui qui joue et les 1er courses c'est du tout droit à 250km/h. Je n'ai pas eu la force de regarder toute la vidéo. qui dure 2 bonnes heures!

Je ne pensais pas que c'était comme ID et qu'il fallait upgrader sa voiture. Dans les jeux Arcade en général on en met plein les yeux dès le départ histoire de donner envie au joueur d'y revenir. Ici ce n'est pas le cas.

Mais dire que je passe mon temps à tout critiquer c'est quand même gonflé!

[rotle]

once my game started, it direct show me an I/O error. i follow DXK instruction but i still cant get it running. https://pastebin.com/raw/R7ngYus8

any help please ?

[fire10]

8 hours ago, masterjedi said:

i got some connects from the game after the game, but after 30 seconds the IO error still showing.

Remember you have to be joined to the internet and also have a controller that is supported, dinput i think

[Heilong79]

Same issue as most here, can get to the IO ERROR screen, in the readme it says "add serial device to vm, set it to /dev/tnt1"  when I do this in VMware it creates a 'port 2' and when I run the vm is says 'unable to connect /dev/tnt1 can not find'

[yaha1234]

23 hours ago, Arcade_mAniaC said:

You dont have Correct Graphic Driver Installed, i had the very same problem which was only resolved with reinstalling of ubuntu 16.04 64-Bit, and verify if you had installed the correct Nvidia Driver by Navigating to System Settings > Software & Updates > Additional Drivers and check if you have GREEN CIRCLE Next to NVIDIA Corportation, I have attached mine for reference, In the meanwhile you can directly copy your Wangan folder which you have right now as it is to the newer installation, this saves time but you do need to install tty0, libs, vmware and others again for the newer installation. This will just save your pain to unpack and Copy updates and crack. Hope this helps!

No. It is not the graphic driver problem. I install the ubuntu 64bit, and change the graphic driver like the picture shows. The problem doesn't change. It should be a surround51 problem. I have find some solution in the internet, but it cannot solve this problem.

[yaha1234]

I solve the problem yet. I don't change the default sound card.

[hostein]

well, we need proper JVS emu written for linux, not VMbased......

then everybody will kiff

[pinkimo2]

I don't agree, having controls in a Windows VM allows to manage any kind of controllers and any kind of additional Windows only apps to tweak them. I'm able to use my Fanatec wheel and a third party app to manage the centering spring. There is still a problem with the axis which reach their max value too soon (1/4 of throttle and you're at max). I've not worked on it but if it's not possible to tweak that on the game side (only the center can be calibrated, which makes sense for a fixed hardware), maybe using another app like vJoy to tweak axis (putting the throttle on a shorter axis of a virtual device) will allow to fix it.

Modifié le 1 février 2018 par pinkimo2

[masterjedi]

Il y a 21 heures, fire10 a dit :

Remember you have to be joined to the internet and also have a controller that is supported, dinput i think

VM has already joined internet by Bridge mode :S
Maybe it's didn't support my controller, can you tell me which controller you have using and working?

 

Il y a 11 heures, Heilong79 a dit :

Same issue as most here, can get to the IO ERROR screen, in the readme it says "add serial device to vm, set it to /dev/tnt1"  when I do this in VMware it creates a 'port 2' and when I run the vm is says 'unable to connect /dev/tnt1 can not find'

make sure you have install "tty0tty"
https://github.com/freemed/tty0tty/blob/master/README.md

 

and setting in vmware like following picture

http://www.emuline.org/uploads/monthly_2018_01/oie_xV9m0TrbOUEc.png.ea859dec109982dde9f00c00116f5317.png

[anshi]

I can't run the game on both ubuntu14 and centos7 with same error...

Quote

[WMN4S:Inf][MessageDataBase::SetTableInfo]
[WMN4S:Inf]---------------------------------------
[WMN4S:Inf]---- TableType:0
[WMN4S:Inf]---- MessageNum:15927 MaxMessageID:80726
[WMN4S:Inf]---------------------------------------
[WMN4S:Inf]
[WMN4S:Inf] eChangeMode_Wait
[WMN4S:Inf][StartUp]MODE WAIT   :: [ StartUp ]
[WMN4S:Inf]Shader::IsLoading(). GrpData[ 0 ] is Load End...
[WMN4S:Inf]Shader[ 0 ] globalIdx: 0x10000020
[WMN4S:Inf]Shader[ 1 ] globalIdx: 0x10000021
[WMN4S:Inf]Shader[ 2 ] globalIdx: 0x10000022
[WMN4S:Inf]Shader[ 3 ] globalIdx: 0x10000023
[WMN4S:Inf]Shader[ 4 ] globalIdx: 0x10000024
[WMN4S:Inf]Shader[ 5 ] globalIdx: 0x10000025
[WMN4S:Inf]Shader[ 6 ] globalIdx: 0x10000026
[WMN4S:Inf]Shader[ 7 ] globalIdx: 0x10000000
[WMN4S:Inf]Shader[ 8 ] globalIdx: 0x10000005
[WMN4S:Inf]Shader[ 9 ] globalIdx: 0x10000006
[WMN4S:Inf]Shader[ 10 ] globalIdx: 0x10000007
[WMN4S:Inf]Shader[ 11 ] globalIdx: 0x10000008
[WMN4S:Inf]Shader[ 12 ] globalIdx: 0x10000009
[WMN4S:Inf]Shader[ 13 ] globalIdx: 0x1000000a
[WMN4S:Inf]Shader[ 14 ] globalIdx: 0x1000000b
[WMN4S:Inf]Shader[ 15 ] globalIdx: 0x1000000c
[WMN4S:Inf]Shader[ 16 ] globalIdx: 0x1000000d
./run.sh: line 1: 11104 Segmentation fault      (core dumped) ./WMN4r LD_PRELOA=./mt4hasp.so

I really don't know why....

Now I am trying ubuntu 16, hope it can work....

[sTo0z]

Did you even boot it up correctly?

 

This line is terrifying:

 

./WMN4r LD_PRELOA=./mt4hasp.so

Looks like you made a typo there?

Modifié le 1 février 2018 par sTo0z

[Boomslangnz]

On 31/01/2018 at 3:34 AM, yaha1234 said:

I got the same problem as ZX3000GT1, it shows that cannot open audio device surround 51 (No such file or directory). I have already changed the sound mode to analog surround 5.1 output, but the problem also happened. How can i solve this problem?

 

 

 

 

I'm also having this issue ACROSS 5 PCS!! every single one doing the same thing GRRR

 

What can we do?

 

Edit**Actually mine is slightly different mine says something having sound resource being busy

 

It says

 

nsAdrv: cannot open audio device surround51 (Device or resource busy)

Modifié le 3 février 2018 par Boomslangnz

[anshi]

...My error was casued by download error... fix it by download it again

but new error show:

 

Quote

[WMN4S:Inf][HASP]Construct USBDongle
[WMN4S:Inf][HASP]Starting...
[WMN4S:Inf][HASP]Started
[WMN4S:Inf][HASP]Access start
[WMN4S:Err][HASP]Failed read(): login: hardware key driver not found
[WMN4S:Inf]constract FilePackManager2()
[WMN4S:Inf]constract BookKeep::Manager()
[WMN4S:Inf] network: SetSelfPcbId(): pcb_id=0
[WMN4S:Inf][FS] request sync()
[WMN4S:Inf][FS] request sync()
[WMN4S:Inf][FS] load request sim:save/bookkeep00/BK_DriveOpe.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep00/BK_DriveOpe.bin)
[WMN4S:Inf][FS] load request sim:save/bookkeep00/BK_DriveOpeCoin.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep00/BK_DriveOpeCoin.bin)
[WMN4S:Inf][FS] load request sim:save/bookkeep00/BK_Story.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep00/BK_Story.bin)
[WMN4S:Inf][FS] load request sim:save/bookkeep00/BK_VS.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep00/BK_VS.bin)
[WMN4S:Inf][FS] load request sim:save/bookkeep00/BK_Ghost.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep00/BK_Ghost.bin)
[WMN4S:Inf][FS] load request sim:save/bookkeep00/BK_GhostSelectLevel.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep00/BK_GhostSelectLevel.bin)
[WMN4S:Inf][FS] load request sim:save/bookkeep00/BK_TA.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep00/BK_TA.bin)
[WMN4S:Inf][FS] load request sim:save/bookkeep00/BK_Event.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep00/BK_Event.bin)
[WMN4S:Inf][FS] load request sim:save/bookkeep00/BK_WTOpe.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep00/BK_WTOpe.bin)
[WMN4S:Inf][FS] load request sim:save/bookkeep00/BK_WTOpeCoin.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep00/BK_WTOpeCoin.bin)
[WMN4S:Inf][FS] load request sim:save/bookkeep00/BK_System.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep00/BK_System.bin)
[WMN4S:Inf][FS] request sync()
[WMN4S:Inf][FS] request sync()
[WMN4S:Inf][FS] load request sim:save/bookkeep01/BK_DriveOpe.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep01/BK_DriveOpe.bin)
[WMN4S:Inf][FS] load request sim:save/bookkeep01/BK_DriveOpeCoin.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep01/BK_DriveOpeCoin.bin)
[WMN4S:Inf][FS] load request sim:save/bookkeep01/BK_Story.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep01/BK_Story.bin)
[WMN4S:Inf][FS] load request sim:save/bookkeep01/BK_VS.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep01/BK_VS.bin)
[WMN4S:Inf][FS] load request sim:save/bookkeep01/BK_Ghost.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep01/BK_Ghost.bin)
[WMN4S:Inf][FS] load request sim:save/bookkeep01/BK_GhostSelectLevel.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep01/BK_GhostSelectLevel.bin)
[WMN4S:Inf][FS] load request sim:save/bookkeep01/BK_TA.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep01/BK_TA.bin)
[WMN4S:Inf][FS] load request sim:save/bookkeep01/BK_Event.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep01/BK_Event.bin)
[WMN4S:Inf][FS] load request sim:save/bookkeep01/BK_WTOpe.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep01/BK_WTOpe.bin)
[WMN4S:Inf][FS] load request sim:save/bookkeep01/BK_WTOpeCoin.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep01/BK_WTOpeCoin.bin)
[WMN4S:Inf][FS] load request sim:save/bookkeep01/BK_System.bin
[WMN4S:Wng][FS] file not found. (sim:save/bookkeep01/BK_System.bin)
[WMN4S:Inf]destract FilePackManager2()
[WMN4S:Err][StartUp]Code 1910(USB DONGLE error1)
 

[WMN4S:Err][HASP]Failed read(): login: hardware key driver not found

What is the hardware key driver ??? I have installed all of the lib files....

I am now trying download it again*N

[anshi]

Emmm problem is casued by I am using ./WMN4r LD_PRELOAD=./mt4hasp.so to run the game

it should be  LD_PRELOAD=./mt4hasp.so  ./WMN4r

[Boomslangnz]

Yeah I fixed my error too. Make sure you don't connect sound card to vm

[yuusan99]

How to use banapass port card?

Only Guest mode?

[Erylcchi]

Good day everyone, So I got a controller to test this but I can't calibrate it, im on test menu and I can't control it to scroll to wheel calibration. Is there someone knows the fix for this?

 

I'm using F310 by Logitech

[Boomslangnz]

2 hours ago, Erylcchi said:

Good day everyone, So I got a controller to test this but I can't calibrate it, im on test menu and I can't control it to scroll to wheel calibration. Is there someone knows the fix for this?

 

I'm using F310 by Logitech

Set up menu stuff for Initial D6 controls in dumbjvsmanager 

 

Then 5th option down,  then 1st option is calibrate

[Erylcchi]

4 hours ago, Boomslangnz said:

Set up menu stuff for Initial D6 controls in dumbjvsmanager 

 

Then 5th option down,  then 1st option is calibrate

I did but it won't navigate through the test menu.

[Heilong79]

So I have been trying to get this to work for a few days following the setup guide here, I have reinstalled Ubuntu many times trying to get this to get pas the IO error, all 32 bit libs installed, tty0tty running, VM ware with 32 bit windows running JVS with the correct ports. I feel WMNT 4 is not talking to windows 7 using tty0tty. I dont think there is anything missing which leads me to believe one of my software components is not compatable so I will list what I am using here and can anyone who has the game running let me know if the parts match theirs.

 

Ubuntu 16.4 64bit.

tty0tty 1.2 installed and running.

I copy lib/ld-linux.so.2 to /opt/arcade/i686/lib/ld-linux.so.2

lib dependancies added and all the extra .so files are copyied to their locations.

32 bit libs added to ubuntu.

VMWare workstation player 12.5.8 (4 core cpu set, with extra serial port /dev/tnt0 added)

windows 7 home(x86) (with serial port 1 changed to 14 and set to hardware)

.net framework 4.5.2 installed

in the wangan folder I copy WMN4r,mt4hasp.so,wm4_hasp.bin to game root
copy Setting.lua to /save/setting00 and save/setting01
go to data\Device\DeviceSetting.lua and change     "/dev/ttyS2",

 

JVS is running(direct input pad set up, start.bat is listening with my pad name at the top)

 

But when I run the game I just get the IO/error and when I close the game I can see the 'start.bat' has not updated and is still listening.

Can anyone tell me if this is their set up please or is it just a case I should be running a 32 bit Ubuntu?

 

 

 

 

[Arcade_mAniaC]

49 minutes ago, Heilong79 said:

So I have been trying to get this to work for a few days following the setup guide here, I have reinstalled Ubuntu many times trying to get this to get pas the IO error, all 32 bit libs installed, tty0tty running, VM ware with 32 bit windows running JVS with the correct ports. I feel WMNT 4 is not talking to windows 7 using tty0tty. I dont think there is anything missing which leads me to believe one of my software components is not compatable so I will list what I am using here and can anyone who has the game running let me know if the parts match theirs.

 

Ubuntu 16.4 64bit.

tty0tty 1.2 installed and running.

I copy lib/ld-linux.so.2 to /opt/arcade/i686/lib/ld-linux.so.2

lib dependancies added and all the extra .so files are copyied to their locations.

32 bit libs added to ubuntu.

VMWare workstation player 12.5.8 (4 core cpu set, with extra serial port /dev/tnt0 added)

windows 7 home(x86) (with serial port 1 changed to 14 and set to hardware)

.net framework 4.5.2 installed

in the wangan folder I copy WMN4r,mt4hasp.so,wm4_hasp.bin to game root
copy Setting.lua to /save/setting00 and save/setting01
go to data\Device\DeviceSetting.lua and change     "/dev/ttyS2",

 

JVS is running(direct input pad set up, start.bat is listening with my pad name at the top)

 

But when I run the game I just get the IO/error and when I close the game I can see the 'start.bat' has not updated and is still listening.

Can anyone tell me if this is their set up please or is it just a case I should be running a 32 bit Ubuntu?

 

 

 

 

What does your VM Ware Notification window (Located Bottom Right) say when your Controller is connected? Attach picture

[Heilong79]

Here is my VM Ware window, the top is one of my pads and the bottom is the serial port.

[sTo0z]

When you say you got "tty0tty running", can you clarify what you mean? Can you explain exactly the steps you did?

[Heilong79]

56 minutes ago, sTo0z said:

When you say you got "tty0tty running", can you clarify what you mean? Can you explain exactly the steps you did?

 

thanks for the reply, I installed it like this from the downloaded tty0tty/modules folder, I typed make and then typed the following;

sudo cp tty0tty.ko /lib/modules/$(uname -r)/kernel/drivers/misc/

sudo depmod
sudo modprobe tty0tty 

sudo chmod 666 /dev/tnt*

after I restarted the computer I ran a terminal and typed: sudo modprobe tty0tty

Modifié le 7 février 2018 par Heilong79

[Boomslangnz]

4 hours ago, Heilong79 said:

Here is my VM Ware window, the top is one of my pads and the bottom is the serial port.

 

 

Delete serial port and printer. Then add serial port again 

 

See how it says serial port 2

 

That's your problem

[Gammah88]

I have a problem with ubuntu i installed the nvidia drivers in order to play but i get the ubuntu login loop and if i uninstall drivers i can login fine.

 

[masterjedi]

9 hours ago, Heilong79 said:

So I have been trying to get this to work for a few days following the setup guide here, I have reinstalled Ubuntu many times trying to get this to get pas the IO error, all 32 bit libs installed, tty0tty running, VM ware with 32 bit windows running JVS with the correct ports. I feel WMNT 4 is not talking to windows 7 using tty0tty. I dont think there is anything missing which leads me to believe one of my software components is not compatable so I will list what I am using here and can anyone who has the game running let me know if the parts match theirs.

 

Ubuntu 16.4 64bit.

tty0tty 1.2 installed and running.

I copy lib/ld-linux.so.2 to /opt/arcade/i686/lib/ld-linux.so.2

lib dependancies added and all the extra .so files are copyied to their locations.

32 bit libs added to ubuntu.

VMWare workstation player 12.5.8 (4 core cpu set, with extra serial port /dev/tnt0 added)

windows 7 home(x86) (with serial port 1 changed to 14 and set to hardware)

.net framework 4.5.2 installed

in the wangan folder I copy WMN4r,mt4hasp.so,wm4_hasp.bin to game root
copy Setting.lua to /save/setting00 and save/setting01
go to data\Device\DeviceSetting.lua and change     "/dev/ttyS2",

 

JVS is running(direct input pad set up, start.bat is listening with my pad name at the top)

 

But when I run the game I just get the IO/error and when I close the game I can see the 'start.bat' has not updated and is still listening.

Can anyone tell me if this is their set up please or is it just a case I should be running a 32 bit Ubuntu?

 

 

 

 

sudo LD_PRELOAD=./mt4hasp.so ./WMN4r

 

[fire10]

Nope you can definitely run ubuntu 64 I steer clear of 17.10 though nothing but issues 16.04 works fine. Tutorial just getting checked, should be up later today

[Arcade_mAniaC]

9 hours ago, Heilong79 said:

Here is my VM Ware window, the top is one of my pads and the bottom is the serial port.

I see you are using Serial Port 2 what is your Serial Port 1 Doing? Also Please very what COM Port you are using? In Device Manager

[Kirby2048]

Can anyone tell me how to install it or upload a tutorial about install it?
cuz I want to play it though...

I already got the dump file but I don't know how to install it...

By the way, I'm trying to using the VirtualBox to run it but I'm confused by those word...

Here is the proof

[Kirby2048]

BTW, did anyone know Discord?
I'm really need live-time help.

[Heilong79]

Thanks guys,

I will try deleting the serial ports so I only have the one that I specified in the VM, I will test it tonight.

[fire10]

Right guys first of all HUGGGGGEEEEEEE thanks to Arcade mAniac and sTo0z, without you guys help this would have been impossible your patience and help was invaluable, I have made 2 very good friends!

Hopefully this will help everyone in the community to play this great game, take your time and follow the tutorial carefully it will be worth it.

Thanks to everyone in the community that make this such a great hobby to be part of.

 

Full Wangan Tutorial including pictures and details all the way from dual boot setup of Linux 

https://mega.nz/#!Fk8B2RgL!5K3jlA80MErh2COennDAYqIzXNvg6icQi_87W6RZDfg

 

Little tip, keep this tutorial open when doing all of this and you can copy and paste all the commands straight to linux terminals to save you typing ;-)

 

Modifié le 9 février 2018 par fire10

[Arcade_mAniaC]

6 minutes ago, fire10 said:

Right guys first of all HUGGGGGEEEEEEE thanks to Arcade mAniac and sTo0z, without you guys help this would have been impossible your patience and help was invaluable, I have made 2 very good friends!

Hopefully this will help everyone in the community to play this great game, take your time and follow the tutorial carefully it will be worth it.

Thanks to everyone in the community that make this such a great hobby to be part of.

 

Full Wangan Tutorial including pictures and details all the way from dual boot setup of Linux 

https://mega.nz/#!08s0SaaJ!z2B4nDxWf0awLPni5fMQ7CMtfbJ_SkkyUf7TFrl3yoo

 

Little tip, keep this tutorial open when doing all of this and you can copy and paste all the commands straight to linux terminals to save you typing ;-)

 

Guys, this tutorial is perfect and well written Fire10 has spent lot of time writing it, anyone configuring wangan it is recommended to follow this from Start to End.

Thanks Fire10 for giving back to the community. 

[fire10]

My absolute pleasure and thanks once again for everything!