[Emu] Dolphin v2407 Triforce : Branche Arcade (Namco / Sega / Nintendo / GC / Wii)

[gasabbath]

hace 17 horas, line dijo:

Hello,

 

It's not Shaders caching. With TestMode (original wait 60sec), MK1 is'nt 100%.

With patch for no 60sec wait, it's run at 100%

 

With the new version, checking testmode = Game Lag. FPS are at 76%... No with 2023/01/24 version. This new version save TestMode Data, it's probably this

 

I am having performance issues (frame drops at the beginning of the match) with Virtua Striker 4 and it´s not the stuttering caused by shaders compiling. 

[mamefan2018]

12 hours ago, Nicolas88 said:

Hi, I just tested the patch and it's works very well. Thanks a lot this is perfect! Thanks for your work

 

 

glad that it works fine

 

so ,I was going through my triforce roms yesterday and I found that I have the Japanese version of mario kart gp2 ..it never worked because the patches for the US version don't work with it ..and I didn't find any patches for it online ..

so ,I was like I can work on it and try to get it to boot ...so I spent a lot of time yesterday but I was still missing something ...went to bed, woke up and spent more time and finally found the last missing part of the puzzle and patched the last address ..problem is a couple of patches needed to follow assembly code ..and I'm not really good at that..so I was really struggling with it .

 

I'm not really sure if it was worth it lol ..I spent way too much time on it .. I didn't play it too much but I didn't notice any extra content in this version ..but it has a Japanese announcer  and I only found one (5 min) vid for it online running on a wii with Nintendont ..so i guess it never ran before on dolphin .. so,I guess that it something .

 

here is the code for anyone interested in the JAP version of GP2

 

[OnFrame]
$Mario Kart GP 2 (japan ver patches)
0x80598A85:byte:0x00000000
0x800741F0:dword:0x98000025
0x80598A86:byte:0x00000001
0x80598A87:byte:0x00000000
0x80598A81:byte:0x00000001
0x80598A82:byte:0x00000000
0x8002EA28:dword:0x60000000
0x8002EA34:dword:0x41820158

 

since it is recognized as a variant for the game ,it shares the same ini with the US version ...so, simply add the extra code in the user config ini for the game and enable it to run the jap version .. having the patches for the us and jap versions enabled didn't cause any problems ..but i didn't play the game for too long   ...and as expected the card created by the US version won't work on the JAP version ..so if you have a card just rename the card file and create one with this version to work ..

I guess the optimal way to run it is to have a separate portable version for dolphin ..so there won't be a need to keep renaming the card created or using the patches for both games at the same time ..

 

 

Modifié le 3 février 2023 par mamefan2018

[cyrax3]

i have a strange problem. I have followed all your guides and the games start to perfection. I even managed to insert the Italian language in virtua striker 4 (thanks crediar this was my dream). the problem is created in the assignment of the keys. for player 1 the B and Y buttons don't work. for player 2 only the Y button. how can I fix it?

[KISS87]

I can play everything fine, the only problem is when I try to play at 16:9 with the patch for widescreens, it seems to work but when you're playing it jumps between 4:3 and 16:9, does anyone else get it? I hope have a solution and it would be perfect. Thank you very much for sharing

[Tartifless]

Hi,

Does anyone know if the sources are available on github or if anything is public yet ?

Regards.

[`kingston Ramsey]

11 hours ago, KISS87 said:

I can play everything fine, the only problem is when I try to play at 16:9 with the patch for widescreens, it seems to work but when you're playing it jumps between 4:3 and 16:9, does anyone else get it? I hope have a solution and it would be perfect. Thank you very much for sharing

don't use use wide screen hack just use stretch to window in the general tab in graphics

[Guisado88]

En 26/1/2023 a las 4:17, mamefan2018 dijo:

so after I got more time to test all the games I have... this is a quick report that could be helpful for anyone having problems  :

 

F-Zero AX - works fine as long as rev D or E is used .. those the r the version that have the bypass motor screen patch ...game saves fine (card file is tricard_SBGG.bin)

Mario Kart Arcade GP - works fine as long as a card is created ...so you have the option to skip the camera screen ..with no card it crashes at camera screen ..game saves fine (card file is tricard_SBKP.bin)

Mario Kart Arcade GP 2 -works fine with or without card .. and game save works fine (card file is tricard_SBNL.bin)

Virtua Striker 4 - the analog direction control is inverted .. can be easily fixed in the controller settings..game runs fine

Virtua Striker 4 (2006) - just like the original version has inverted controls .. fixed in the same way and game runs fine

Virtua Striker 2002 - the directional controls is assigned to the d-pad (left and up r swapped )and down is missing ...game runs fine but of course with no down button it's not playable.

 

quick notes:

- in order to set controls standard controller should be picked ..and after you are done setting the controls to keyboard or controller ..exit and set it to am_baseboard

- I tested directx/vulkan and opengl and had no problems with any backend at 4x res

- using dolphin you can easily create different controller profiles for every game and save it then simply make the game start with a specific controller profile ..

 

 

How get or make that cards? veryy thankls

[Guisado88]

En 2/2/2023 a las 11:41, hippopippo dijo:

Here are two fantastic tools to manage Triforce rom dumps made by FIX94

 

usage :  Drag and drop CHD directly from Mame roms and wait .bin conversion (get chdman.exe and put it into the same folder as TriIsoExtract.exe)

 

TriIsoExtract.exe 29.5 kB · 30 descargas

 

usage : Drag and drop generated .bin and wait header fix for your loader (just rename .bin to .iso)

 

TriHdrPatcher.exe 42.5 kB · 29 descargas

 

Those are games supported till now :

GFZJ8P - F-Zero AX
GGPE01 - Mario Kart Arcade GP
GGPE02 - Mario Kart Arcade GP 2
GPBJ8P - Gekitou Pro Yakyuu
GVS32J - Virtua Striker 3 Ver. 2002
GVS32E - Virtua Striker 3 Ver. 2002
GVS45J - Virtua Striker 4
GVS45E - Virtua Striker 4
GVS46J - Virtua Striker 4 Ver. 2006
GVS46E - Virtua Striker 4 Ver. 2006

 

GPBJ8P - Gekitou Pro Yakyuu work¿ :SSS i cant

[MrThunderwing]

On 1/25/2023 at 9:00 AM, hippopippo said:

After a long time Crediar has released a new version of the Dolphin-Triforce 5.0 and finally it is possible to play the *original arcade* F-Zero AX (not GC version) and many others

 

https://gofile.io/d/KAvVED

  Hide contents

 

 

How on earth did you find this in the first place? There's absolutely zero information about it over on the main Dolphin site...

 

I haven't tested this yet, but I'm guessing it won't work on my PC as I'm still (still!) using Windows 7. Assuming it isn't going to work, I don't suppose anyone's got an sort of Windows 7 patch or workaround?

[mamefan2018]

1 hour ago, MrThunderwing said:

How on earth did you find this in the first place? There's absolutely zero information about it over on the main Dolphin site...

 

I haven't tested this yet, but I'm guessing it won't work on my PC as I'm still (still!) using Windows 7. Assuming it isn't going to work, I don't suppose anyone's got an sort of Windows 7 patch or workaround?

it's from crediars gitlab page

https://crediar.dev/crediar/dolphin

 

and yep dolphin dropped win 7 support last year  ... although i really didn't want to move to win 10 for retro /arcade gaming because win 7 was really stable ...but it was clear with how things are heading that i needed to migrate to win 10/11.

 

 

Modifié le 7 février 2023 par mamefan2018

[mamefan2018]

I have been working on a patch for "Gekitou Pro Yakyuu Mizushima Shinji All Stars vs. Pro Yakyuu "  for the past 3 days ....it took me a long time to get that damn thing working ...but i finally got it done and the game booted and got the controls to work ...

i didn't test it for a long time since it's in jap language .. and I'm not really a fan of baseball and don't know much about the sport ...but everything seems to be fine .. 2 players work and the test menu saves ..( to enter test menu wait for the game to boot and get the title screen ...part of the patch disables test mode while booting and during the warning message)

 

this time i made a gecko code .. i thought it's a clean way to handle the code ...and easy to add ... in game properties under "gecko codes" --> add new code--> give it any name ..i went with "warning fix" and add the code ..make sure u add it in the right place not under description...

 

C229E764 00000001
60000000 00000000
2047A43c 3f555555
C229E764 00000001
9421FFE0 00000000
e2000001 00000000

 

 

enable the code and that's it ....hopefully it works for everyone   .. and make sure to use "Rev C"  ..this is the version i have and worked on .

 

 

oh and here is a bonus patch for f-zero (rev C)  ... to skip motor setup

 

$Disable Motor Setup (Rev. C)
0x8024DB74:dword:0x801809F8
0x8024DB78:dword:0x8018085C

it's not a gecko code so add it under patches ...

Modifié le 8 février 2023 par mamefan2018

[Guisado88]

hace 10 horas, mamefan2018 dijo:

I have been working on a patch for "Gekitou Pro Yakyuu Mizushima Shinji All Stars vs. Pro Yakyuu "  for the past 3 days ....it took me a long time to get that damn thing working ...but i finally got it done and the game booted and got the controls to work ...

i didn't test it for a long time since it's in jap language .. and I'm not really a fan of baseball and don't know much about the sport ...but everything seems to be fine .. 2 players work and the test menu saves ..( to enter test menu wait for the game to boot and get the title screen ...part of the patch disables test mode while booting and during the warning message)

 

this time i made a gecko code .. i thought it's a clean way to handle the code ...and easy to add ... in game properties under "gecko codes" --> add new code--> give it any name ..i went with "warning fix" and add the code ..make sure u add it in the right place not under description...

 

C229E764 00000001
60000000 00000000
2047A43c 3f555555
C229E764 00000001
9421FFE0 00000000
e2000001 00000000

 

 

enable the code and that's it ....hopefully it works for everyone   .. and make sure to use "Rev C"  ..this is the version i have and worked on .

 

 

oh and here is a bonus patch for f-zero (rev C)  ... to skip motor setup

 

$Disable Motor Setup (Rev. C)
0x8024DB74:dword:0x801809F8
0x8024DB78:dword:0x8018085C

it's not a gecko code so add it under patches ...

F-zero (Rev C) Work!

 

But Gekitou Pro Yakyuu Mizushima Shinji All Stars vs. Pro Yakyuu same error not launch

 

By the way Virtua Striker 4 Asia and Japan work?? i cant make Run

 

By the way, is there a solution for the slowdowns in Mario KArt GP?

Modifié le 8 février 2023 par Guisado88

[hippopippo]

Gekitou needs a server : "Connecting to the network, please wait"

 

 

 

[mamefan2018]

6 hours ago, Guisado88 said:

F-zero (Rev C) Work!

 

But Gekitou Pro Yakyuu Mizushima Shinji All Stars vs. Pro Yakyuu same error not launch

 

By the way Virtua Striker 4 Asia and Japan work?? i cant make Run

 

By the way, is there a solution for the slowdowns in Mario KArt GP?

 

use the test mode patches i posted for the mario kart games ...or just use the older build from 2 weeks ago.

 

6 hours ago, hippopippo said:

Gekitou needs a server : "Connecting to the network, please wait"

 

 

 

 

what is the version you are using ? ... i patched (rev c)

 

got the file from here

https://archive.org/download/triforce-roms/Extracted Disc Images (Decrypted)/

 

it boots fine for me

Modifié le 8 février 2023 par mamefan2018

[`kingston Ramsey]

13 hours ago, mamefan2018 said:

$Disable Motor Setup (Rev. C)
0x8024DB74:dword:0x801809F8
0x8024DB78:dword:0x8018085C

how do i add these patches friend i must be doing something wrong i can't get it to work

 

also this one as well

 

Here are the patches I made for F-zero AX  ..they need to be added to the user config ini for the game and under patches enable the options needed

 

[OnFrame]
$Advertise Sound ON
0x803D0175:byte:0x00000001
$Advertise Sound OFF
0x803D0175:byte:0x00000000
$Game Difficulty (very easy)
0x803D0176:byte:0x00000000
$Game Difficulty (easy)
0x803D0176:byte:0x00000001
$Game Difficulty (normal)
0x803D0176:byte:0x00000002
$Game Difficulty (hard)
0x803D0176:byte:0x00000003
$Game Difficulty (hardest)
0x803D0176:byte:0x00000004
$Race Mode Laps (normal)
0x803D0179:byte:0x00000000
$Race Mode Laps (set 1)
0x803D0179:byte:0x00000001
$Race Mode Laps (set 2)
0x803D0179:byte:0x00000002
$Race Mode Laps (set 3)
0x803D0179:byte:0x00000003
$Race Mode Laps (set 4)
0x803D0179:byte:0x00000004
$Race Mode Laps (set 5)
0x803D0179:byte:0x00000005
$Handicap  On
0x803D132E:byte:0x00000001
$Handicap  Off
0x803D132E:byte:0x00000000

Modifié le 8 février 2023 par `kingston Ramsey

[mamefan2018]

28 minutes ago, `kingston Ramsey said:

how do i add these patches friend i must be doing something wrong i can't get it to work

 

also this one as well

 

Here are the patches I made for F-zero AX  ..they need to be added to the user config ini for the game and under patches enable the options needed

 

[OnFrame]
$Advertise Sound ON
0x803D0175:byte:0x00000001
$Advertise Sound OFF
0x803D0175:byte:0x00000000
$Game Difficulty (very easy)
0x803D0176:byte:0x00000000
$Game Difficulty (easy)
0x803D0176:byte:0x00000001
$Game Difficulty (normal)
0x803D0176:byte:0x00000002
$Game Difficulty (hard)
0x803D0176:byte:0x00000003
$Game Difficulty (hardest)
0x803D0176:byte:0x00000004
$Race Mode Laps (normal)
0x803D0179:byte:0x00000000
$Race Mode Laps (set 1)
0x803D0179:byte:0x00000001
$Race Mode Laps (set 2)
0x803D0179:byte:0x00000002
$Race Mode Laps (set 3)
0x803D0179:byte:0x00000003
$Race Mode Laps (set 4)
0x803D0179:byte:0x00000004
$Race Mode Laps (set 5)
0x803D0179:byte:0x00000005
$Handicap  On
0x803D132E:byte:0x00000001
$Handicap  Off
0x803D132E:byte:0x00000000

right click -->game properties --->game config tab --->editor --->user config section ...add the codes under [onframe] tag add that tag if you don't have it ..

close and open properties again they should appear under patches ...simply check them to enable ....

 

the motor setup patch is for rev c ..since we already got rev d and e ..this will fix rev c and make it boot

 

and for all the other game settings patches they only work for rev E ... i just went with the latest rev .. like the motor patch they don't work for other revs .

[murray]

14 hours ago, mamefan2018 said:

I have been working on a patch for "Gekitou Pro Yakyuu Mizushima Shinji All Stars vs. Pro Yakyuu "  for the past 3 days ....it took me a long time to get that damn thing working ...but i finally got it done and the game booted and got the controls to work ...

i didn't test it for a long time since it's in jap language .. and I'm not really a fan of baseball and don't know much about the sport ...but everything seems to be fine .. 2 players work and the test menu saves ..( to enter test menu wait for the game to boot and get the title screen ...part of the patch disables test mode while booting and during the warning message)

 

this time i made a gecko code .. i thought it's a clean way to handle the code ...and easy to add ... in game properties under "gecko codes" --> add new code--> give it any name ..i went with "warning fix" and add the code ..make sure u add it in the right place not under description...

 

C229E764 00000001
60000000 00000000
2047A43c 3f555555
C229E764 00000001
9421FFE0 00000000
e2000001 00000000

 

 

enable the code and that's it ....hopefully it works for everyone   .. and make sure to use "Rev C"  ..this is the version i have and worked on .

 

 

oh and here is a bonus patch for f-zero (rev C)  ... to skip motor setup

 

$Disable Motor Setup (Rev. C)
0x8024DB74:dword:0x801809F8
0x8024DB78:dword:0x8018085C

it's not a gecko code so add it under patches ...

 

Gekitou Pro Yakyuu Mizushima Shinji All Stars vs. Pro Yakyuu works for me, thanks for your work on these patches, really appreciate you sharing these! I get an unkown game ID error when launching using the 02 02 2023 crediar Dolphin, but i can just click ignore and it goes away and the game starts fine. Will do some more thorough testing later.

[mamefan2018]

7 minutes ago, murray said:

 

Gekitou Pro Yakyuu Mizushima Shinji All Stars vs. Pro Yakyuu works for me, thanks for your work on these patches, really appreciate you sharing these! I get an unkown game ID error when launching using the 02 02 2023 crediar Dolphin, but i can just click ignore and it goes away and the game starts fine. Will do some more thorough testing later.

glad that it worked for u ... which version are u using? because i tested the game a lot and never got the unknown game id error.

[murray]

31 minutes ago, mamefan2018 said:

glad that it worked for u ... which version are u using? because i tested the game a lot and never got the unknown game id error.

 

The same one from archive.org decrypted folder, using only the gecko patch, no other patch on the game.

Gekitou Pro Yakyuu Mizushima Shinji All Stars vs. Pro Yakyuu (Rev C).BIN

 

I renamed the file to iso. I get
"Unknown Game ID: 58474254, using default controls"

 

I can click ignore for this session and it goes away. The file md5 is e074c698e358786013383fe36bc8fcb3

 

Modifié le 9 février 2023 par murray

[`kingston Ramsey]

40 minutes ago, mamefan2018 said:

right click -->game properties --->game config tab --->editor --->user config section ...add the codes under [onframe] tag add that tag if you don't have it ..

still didn't work

[mamefan2018]

24 minutes ago, murray said:

 

The same one from archive.org decrypted folder, using only the gecko patch, no other patch on the game.

Gekitou Pro Yakyuu Mizushima Shinji All Stars vs. Pro Yakyuu (Rev C).BIN

 

I renamed the file to iso. I get
"Unknown Game ID: 58474254, using default controls"

 

I can click ignore for this session and it goes away. The file md5 is e074c698e358786013383fe36bc8fcb3

 

hmm that is weird ... yep the md5 is right .. i tested it on 2 pcs with the latest triforce build .. and a friend tested it and never got that error.

try to remove all the SBGX files (3 files ) from the user/triforce directory and start the game to create them again ...

 

 

30 minutes ago, `kingston Ramsey said:

still didn't work

you are missing the [OnFrame] tag before the code for the c version

[murray]

7 hours ago, mamefan2018 said:

hmm that is weird ... yep the md5 is right .. i tested it on 2 pcs with the latest triforce build .. and a friend tested it and never got that error.

try to remove all the SBGX files (3 files ) from the user/triforce directory and start the game to create them again ...

 

 

you are missing the [OnFrame] tag before the code for the c version

 

 

Strange, i just tried it on a fresh windows 10.

New download/unzip of 2/2/2023 dolphin from crediar.

Set Triforce controller setting, applied gecko patch.

 

I get the same Unknown Game ID error. It's not a big issue, just a minor thing. Did you compile your own version of Dolphin? Maybe the code has been updated to include the game id but the binaries supplied haven't been updated.

 

[mamefan2018]

32 minutes ago, murray said:

 

 

Strange, i just tried it on a fresh windows 10.

New download/unzip of 2/2/2023 dolphin from crediar.

Set Triforce controller setting, applied gecko patch.

 

I get the same Unknown Game ID error. It's not a big issue, just a minor thing. Did you compile your own version of Dolphin? Maybe the code has been updated to include the game id but the binaries supplied haven't been updated.

 

nope i'm using the latest build ..same one u r using  ,it's the one i posted a week ago ...i was actually going to build my own version ...but since i got all the triforce games i downloaded to work ..i was like it's not worth it specially that visual studio takes so much space .

 

and i tried the game on fresh dolphin copies on 2 pcs ...and i just didn't get the any errors at all .... i'm using portable dolphin ..so it's super easy to set it up ... and i don't think i have any special settings on..

 

 

[`kingston Ramsey]

2 hours ago, murray said:

you are missing the [OnFrame] tag before the code for the c version

thx buddy all games are working now with patches

[Guisado88]

hace 13 horas, mamefan2018 dijo:

 

use the test mode patches i posted for the mario kart games ...or just use the older build from 2 weeks ago.

 

 

what is the version you are using ? ... i patched (rev c)

 

got the file from here

https://archive.org/download/triforce-roms/Extracted Disc Images (Decrypted)/

 

it boots fine for me

how you make work VVirtua Striker 4 Japan and Virtua Stiker Japann 2006 and asiann vversion?

 

Any patches?

[mamefan2018]

5 minutes ago, Guisado88 said:

how you make work VVirtua Striker 4 Japan and Virtua Stiker Japann 2006 and asiann vversion?

 

Any patches?

i don't have them .. so i never tested them .. i assumed they worked fine like all the other virtua striker games..

what is the problem with them?

[Guisado88]

hace 51 minutos, mamefan2018 dijo:

i don't have them .. so i never tested them .. i assumed they worked fine like all the other virtua striker games..

what is the problem with them?

Error in initial, put any of update or config

[CARPnadamas]

hace 1 hora, mamefan2018 dijo:

no los tengo... así que nunca los probé... supuse que funcionaban bien como todos los otros juegos de virtua striker...

cual es el problema con ellos?

Hi..virtua striker 4 for both asia and japan does not pass the system update..the blue screen when updating in the test menu turns red giving an error..as for virtua striker 4 v2006 japan updates correctly but when starting it does not start the game... the update message reappears. (vs2006 japan iso previous version not the latest ones... the current ones directly give a red screen error). 
Virtua striker 2002 japan does not start.. even though we have the correct japanese iso, the export version always loads in the emu. (this also happens in the brodostar version)

[Guisado88]

hace 2 minutos, CARPnadamas dijo:

Hi..virtua striker 4 for both asia and japan does not pass the system update..the blue screen when updating in the test menu turns red giving an error..as for virtua striker 4 v2006 japan updates correctly but when starting it does not start the game... the update message reappears. (vs2006 japan iso previous version not the latest ones... the current ones directly give a red screen error). 
Virtua striker 2002 japan does not start.. even though we have the correct japanese iso, the export version always loads in the emu. (this also happens in the brodostar version)

What is  brodostar version??

[mamefan2018]

34 minutes ago, Guisado88 said:

Error in initial, put any of update or config

i downloaded virtua striker 4 asia rev b and yea i can see the update problem

but i managed to find a fix for it ... just copy this file to ur user/triforce folder

https://gofile.io/d/Gy7CVw

 

test it and hopefully the asian ver of vs4 works for u ... I really don't see any difference at all from the export versions ..it's basically the same game .

 

20 minutes ago, CARPnadamas said:

Hi..virtua striker 4 for both asia and japan does not pass the system update..the blue screen when updating in the test menu turns red giving an error..as for virtua striker 4 v2006 japan updates correctly but when starting it does not start the game... the update message reappears. (vs2006 japan iso previous version not the latest ones... the current ones directly give a red screen error). 
Virtua striker 2002 japan does not start.. even though we have the correct japanese iso, the export version always loads in the emu. (this also happens in the brodostar version)

test vs4 asia rev b with this file

https://gofile.io/d/Gy7CVw     (copy this file to ur user/triforce folder )

 

[Guisado88]

hace 1 hora, mamefan2018 dijo:

i downloaded virtua striker 4 asia rev b and yea i can see the update problem

but i managed to find a fix for it ... just copy this file to ur user/triforce folder

https://gofile.io/d/Gy7CVw

 

test it and hopefully the asian ver of vs4 works for u ... I really don't see any difference at all from the export versions ..it's basically the same game .

 

test vs4 asia rev b with this file

https://gofile.io/d/Gy7CVw     (copy this file to ur user/triforce folder )

 

asia version work perfect onnly left Japan version. very thannks!

[CARPnadamas]

hace 7 horas, mamefan2018 dijo:

 

pruébalo y espero que la versión asiática de vs4 funcione para ti... Realmente no veo ninguna diferencia con las versiones de exportación... es básicamente el mismo juego.

 

 

 

Hi..The Asian versions with the export are practically the same. As for the Japanese versions, it would be nice if they were functional.

[CARPnadamas]

hace 7 horas, mamefan2018 dijo:

 

test vs4 asia rev b with this file

https://gofile.io/d/Gy7CVw     (copy this file to ur user/triforce folder )

 

The Asian version loads but I don't get the textures of the players in the game... haha, only the pants and the ball.

[mamefan2018]

14 minutes ago, CARPnadamas said:

The Asian version loads but I don't get the textures of the players in the game... haha, only the pants and the ball.

in game properties check "enable FPRF"

 

or add

[Core]

FPRF = True

 

to editor --->user config

[mamefan2018]

I just tested vs 2002 japan and it works fine on the latest build ... the 3 versions of vs3 2002 all work fine ..

and they r basically the same game ... just different regions

and same goes for vs4 ... they all work (the asia version needs the files i posted earlier)  but they work and they r the same game just different regions and revs

[mamefan2018]

I got the last version of the game running vs4 2006 japan (rev d)

 

just add this gecko code :

 

bypass boot/network

040568D8 60000000
004B4828 00000000

 

 

i think this is the only version that is a bit different than the export ...it's in jap language .

I guess at this point we can check all the VS games with all different versions  as playable.

 

Modifié le 10 février 2023 par mamefan2018

[CARPnadamas]

hace 3 horas, mamefan2018 dijo:

I just tested vs 2002 japan and it works fine on the latest build ... the 3 versions of vs3 2002 all work fine ..

and they r basically the same game ... just different regions

and same goes for vs4 ... they all work (the asia version needs the files i posted earlier)  but they work and they r the same game just different regions and revs

Hi, thanks for answering. I have already solved the textures.

As for vs2002 japan version loads the japanese version? (it's the same game but japanese letters and it changes the ball to the korea-japan 2002 fevernova) because the japanese iso doesn't load it... it always loads the export version even if you have the japanese iso... thanks!