[Arcade pc] Family Guy Bowling (Team Play)

[jcstahl1]

  Le 22/02/2025 à 17:47, bucksoverfame a dit :

I'm lost to which file I have to edit, where's it located?

Développer  

\BepInEx\config\BepInEx.cfg

[Dutchman2000]

  Le 22/02/2025 à 19:04, jcstahl1 a dit :

\BepInEx\config\BepInEx.cfg

Développer  

No config folder or file on my system after running the game. 

[TeknoNecro]

T = Test mode and it looks like the numpad left / right also work for hook.

 

Also playing around with the game:  Pause/Break = Pause

 

 

But if you set the game to Coin mode, I cannot seem to find a key that works for coins

Modifié le 22 février par TeknoNecro

[eproxy]

Hopeful someone will know where to edit IO for windows and reply with. without tp

[jcstahl1]

  Le 22/02/2025 à 22:20, eproxy a dit :

Hopeful someone will know where to edit IO for windows and reply with. without tp

Développer  

i doubt many devs with the talent to do it, would actually be interested in doing so.   same reason that a lot of other games don't work with any other loaders than TP.  not enough personal interest for them to do it.

[jcstahl1]

  Le 22/02/2025 à 22:03, Dutchman2000 a dit :

No config folder or file on my system after running the game. 

Développer  

then you installed the wrong bepinex or didn't installed it correctly.  you need: https://github.com/BepInEx/BepInEx/releases/download/v5.4.23.2/BepInEx_win_x64_5.4.23.2.zip

 

Unzip into the game folder, so that the BepInEx folder is in the same folder as bowling.exe and bowling_Data folder, and the two doorstop & winhttp files are in the folder with the exe as well.

 

Run game once in TP (it's not going to display right this time but that's okay) and then close it.

 

Go back into your game folder.  inside the BepInEx folder, go into the config folder.

 

Open BepInEx.cfg in notepad

 

Edit the following line near the bottom that says Type = Application to say Type = MonoBehaviour (make sure this is spelled correct), and save it.

 

Download and unzip the TP dll fix, into the the BepInEx\Plugins\ folder

 

Launch the game again in TPUI, and it should boot and be playble.  TP controls config is not working properly and still needs fixed from them.  Otherwise you can use the hardcoded keys noted elsewhere in this thread.

Make sure to check simulate trackball box, make sure disable hardcoded controls box isn't checked.  you may also need to check/uncheck the hide cursor option, closing & reopening the TPUI each time you change &

save it in the game settings

 

[Dutchman2000]

  Le 22/02/2025 à 22:42, jcstahl1 a dit :

then you installed the wrong bepinex or didn't installed it correctly.  you need: https://github.com/BepInEx/BepInEx/releases/download/v5.4.23.2/BepInEx_win_x64_5.4.23.2.zip

 

Unzip into the game folder, so that the BepInEx folder is in the same folder as bowling.exe and bowling_Data folder, and the two doorstop & winhttp files are in the folder with the exe as well.

 

Run game once in TP (it's not going to display right this time but that's okay) and then close it.

 

Go back into your game folder.  inside the BepInEx folder, go into the config folder.

 

Open BepInEx.cfg in notepad

 

Edit the following line near the bottom that says Type = Application to say Type = MonoBehaviour (make sure this is spelled correct), and save it.

 

Download and unzip the TP dll fix, into the the BepInEx\Plugins\ folder

 

Launch the game again in TPUI, and it should boot and be playble.  TP controls config is not working properly and still needs fixed from them.  Otherwise you can use the hardcoded keys noted elsewhere in this thread.

Make sure to check simulate trackball box, make sure disable hardcoded controls box isn't checked.  you may also need to check/uncheck the hide cursor option, closing & reopening the TPUI each time you change &

save it in the game settings

 

Développer  

Nope, that is the exact version I am using.  The folder is in the same folder the EXE is in.  When it launches, I get the title screen with the printer message.   No config file created.  

[jcstahl1]

don't know what to tell you.  either you have something not in the right place, or the wrong version.

[TeknoNecro]

  Le 22/02/2025 à 23:20, Dutchman2000 a dit :

Nope, that is the exact version I am using.  The folder is in the same folder the EXE is in.  When it launches, I get the title screen with the printer message.   No config file created.  

Développer  

So, you have the directory "BepInEx" with doorstop_version, changelog.txt, doorstop_config.ini & winhttp.dll in the same directory as bowling.exe... then inside the BepInEx directory you have the "plugins" directory with the TP dll in that?  and it still doesn't work?  That's the same exact instructions I followed and I'm able to play on i7 with nVidia 2080 card no problems.

 

[Son of Blindboy]

For those still having problems 

Download BePinex file (64bit version if using X64 operating system) and extract it.

Copy BepinEx folder and other files to game folder where game .exe is

Click on BepinEx folder and inside it, create new folder and call it plugins

Place the TP dll file inside Plugin folder

Run game

Note, after running game for first time, files are created (including the config file that needs editing)

Quit game

Locate the created Bepin config file, scroll down to [Preloader.Entrypoint] set type=MonoBehaviour

If done correctly, game will work without paper error

Modifié le 23 février par Son of Blindboy

[Holly]

  Le 22/02/2025 à 23:20, Dutchman2000 a dit :

Nope, that is the exact version I am using.  The folder is in the same folder the EXE is in.  When it launches, I get the title screen with the printer message.   No config file created.  

Développer  

after various problems finally i reach to do work it..now if possible i would like to have an icon fot it on parrot and i would like to know how i can select characters..i don t reach to select but when i push start the game begins directly with a charater chosen

Modifié le 26 février par Holly

[kkelly2018]

This installaltion was easier than plant vs zombie install

[Jasper]

Game runs, thank you you guys for the hard work!!

 

Was wondering, is the Trackball supposed to work? Seems to start the player in the bowling position, but nothing happens after. Same trackball works wonders in Golden tee games.

[7zxkv]

plugin v1.X out

[cander19]

  Le 02/03/2025 à 02:29, Jasper a dit :

Game runs, thank you you guys for the hard work!!

 

Was wondering, is the Trackball supposed to work? Seems to start the player in the bowling position, but nothing happens after. Same trackball works wonders in Golden tee games.

Développer  

Yes, trackball works. Select the option about simulating trackball.

[TeknoNecro]

Plugin already bumped up to v1.4 with additional fixes.

[danielferr]

Hello, someone know how to get the game running in fullscreen for stand alone version (Without TP)?

[hippopippo]

unpack this .dll inside BepInEx\plugins\ and press ALT-ENTER to change Windowed <> Fullscreen and viceversa

 

 

 

Fullscreen_Patch.zipRecherche des informations…

[mamefan1]

  Le 17/03/2025 à 10:27, danielferr a dit :

Hello, someone know how to get the game running in fullscreen for stand alone version (Without TP)?

Développer  

doesnt it only work with TP or did i miss something? I thought if you try to launch standalone it gets stuck at the printer error. 

[danielferr]

  Le 17/03/2025 à 16:23, mamefan1 a dit :

doesnt it only work with TP or did i miss something? I thought if you try to launch standalone it gets stuck at the printer error. 

Développer  

Use the last version of TP plugin and works great with hardcoded keys and mouse as trackball without TP

[TeknoNecro]

Just a note: Use ALT-F4 to quit, hitting the ESC will crash the program.  Even though I support TP and have a sub, I tried it, it worked without issues in full screen mode in 4K and it looked great.

[chrisb]

I get a "Switching to resolution 1920x1080 failed, trying lower one
All resolution switches have failed
Screen: could not switch resolution (1920x1080 fs=0 hz=0). any ideas?

[Holly]

  Le 17/03/2025 à 23:38, chrisb a dit :

I get a "Switching to resolution 1920x1080 failed, trying lower one
All resolution switches have failed
Screen: could not switch resolution (1920x1080 fs=0 hz=0). any ideas?

Développer  

I had some problem...i resolved adding "Monobeahoviur" in all Lines of Preloader.Entrypoint] set..try

[hippopippo]

unpack inside /bepinex/plugins (WARNING : USE THIS FOR STANDALONE VERSION ONLY!)

 

- Fullscreen

- Disable mouse cursor

 

  Révéler le contenu masqué

https://www.mediafire.com/file/v4zay58rauyt6ix/FGBTPPlugin-standalone.zip/file

 

[chrisb]

  Le 18/03/2025 à 10:27, hippopippo a dit :

unpack inside /bepinex/plugins (WARNING : USE THIS FOR STANDALONE VERSION ONLY!)

 

- Fullscreen

- Disable mouse cursor

 

  Révéler le contenu masqué

https://www.mediafire.com/file/v4zay58rauyt6ix/FGBTPPlugin-standalone.zip/file

 

Développer  

Thanks but it didn't work. Here is a pic of the error

 

[hippopippo]

it's up to you, check your gpu config & display freq (it says 0 hz)

[joe555]

  Le 18/03/2025 à 12:05, chrisb a dit :

Thanks but it didn't work. Here is a pic of the error

 

Développer  

Lower your resolution first, than launch, than quit and go back to regular res and launch again, it's your GPU having issues finding that res for some reason , so try drop down to 1280x720 first launch, exit don't worry about not fitting screen correct, than set back to 1920x1080 and launch again 

Modifié le 19 mars par joe555

[BarryWheresBarry]

When I try to launch game via TP I get the "Failed to Load DLL Error 4" error message. Launches fine without TP. I only get that error when I launch via TIP. I get the same error on a few other TP games. Not sure what's going on. I've done all the updates and directx and all in one Vc+++ downloads as well. Not sure where this DLL error is coming from. I'm tempted to do a fresh windows 10 install but don't want to if it's not necessary.  Thanks in advance.