[Arcade PC] Night Hunter After Dark II v2.06 (UNIS Technologies) TP Ready

[connor]

2 hours ago, scooby said:

@connor: instead of talking, explain to users how to do, it will be very much usefull. In actual state, this version in not working.

Lol

do i know you? with your shitty attitude go ask one of your friends to help you not me.

Modifié le 1 décembre par connor

[Axl72]

guys please let's not fight about this nonsense! Connor please explain to me how to make 3.06 work? I would be very grateful

[WildWolf]

take it easy guys, or I use my Magic Deck :

[lezzi87]

I have managed to run the 3.02, but the game doesn't show the map, it just start from the ice level. Is that correct or did i do something wrong?

Modifié le 1 décembre par lezzi87

[connor]

No you did it wrong ver 3.02 should show all 3 stages to pick same as 2.06 showed 2.

[bojo5150]

54 minutes ago, lezzi87 said:

I have managed to run the 3.02, but the game doesn't show the map, it just start from the ice level. Is that correct or did i do something wrong?

It will show the full map after you complete stage 1

[joe555]

This isn't anything new, been playing this version ever since TP added this game, and you could play it before on other loader, 

Modifié le 2 décembre par joe555

[S.G.D]

 

[connor]

Nice video but the map with 3 stages shown after boot when you start the game.

you don’t need to finish first stage for it.

[mamefan1]

Version 2.0.6 starts with map with 2 locations (ice castle, and misty swamp)

version 3.0.2 starts with ice castle, then goes to map with ice castle completed, and misty swamp, and lost trails

[miao8yu5]

9 hours ago, mamefan1 said:

Version 2.0.6 starts with map with 2 locations (ice castle, and misty swamp)

version 3.0.2 starts with ice castle, then goes to map with ice castle completed, and misty swamp, and lost trails

Hi guy，where can I got version 3.0.2

[connor]

10 hours ago, mamefan1 said:

Version 2.0.6 starts with map with 2 locations (ice castle, and misty swamp)

version 3.0.2 starts with ice castle, then goes to map with ice castle completed, and misty swamp, and lost trails

No if done correctly 2.06 start with map of 2 stages and 3.02 with 3 stages, as i wrote the map always displayed first after boot for gameplay no need to finish any stage to see it.

 

55 minutes ago, miao8yu5 said:

Hi guy，where can I got version 3.0.2

its public search and you’ll find it.

Modifié le 3 décembre par connor

[jcstahl1]

5 minutes ago, connor said:

No if done correctly 2.06 start with map of 2 stages and 3.02 with 3 stages, as i wrote the map always displayed first after boot for gameplay no need to finish any stage to see it.

 

its public search and you’ll find it.

Actually, there are multiple versions of this dump going around.  Both have configuration files that have been edited.

One dump allows the third level to appears after completeing only one level and the other dump allow all levels to be selectable from the start. 

On a real machine, you must complete both of the original levels to access the third.

 

So with that said, no one is wrong in this situation so quit arguing about it.  

 

Conor, you're the one who brought up this dump existing and working with TP, so why don't you reupload and share it for the community?  Instead of just trying to flex on emuline for some weird internet clout.

[connor]

6 minutes ago, jcstahl1 said:

So with that said, no one is wrong in this situation so quit arguing about it.  

Do you think the game works correctly without a map before gameplay really? 😂

[jcstahl1]

If you have version 3.0.2 and want all levels to show up to start with and your game currently makes you complete level one before unlocking level 3 you need to do this:

 

In your game folder, go into the \config\ folder.

 

Find the config_game_run_type.txt file.

 

Edit your file to look like the following:

LEVEL = 1
GAME_LEVEL = 1
GAME_LEVEL_COUNT = 4
GAME_LEVEL_TO_LOAD_LEVEL_1 = 1
GAME_LEVEL_TO_LOAD_LEVEL_2 = 3
GAME_LEVEL_TO_LOAD_LEVEL_3 = 5
GAME_LEVEL_TO_LOAD_LEVEL_4 = 6
GAME_LEVEL_TO_LOAD_LEVEL_5 = 5
GAME_LEVEL_TO_LOAD_LEVEL_6 = 1
PASSED_GAME_LEVEL_LIST = 4

//ONLY_PLAY_MOVIE_TIMES = YES
PLAY_MOVIE_TIMES = 1
//PLAY_MOVIE_ORDER = FROM_LAST
RUN_FIRST_LEVEL_NO_SELECT = NO
MUST_PASS_LEVEL_4 = NO

Rename/backup original file and save/overwrite the file with the new settings. 

[OutSideR]

https://pixeldrain.com/u/dCEBCQp4

[jcstahl1]

7 minutes ago, connor said:

Do you think the game works correctly without a map before gameplay really? 😂

Having being a person that has played the game in the arcade, yes.  On an original arcade machine, there is no level select untill you complete the first level.  Even then, it only unlocks level 2.  After completing level 2, it then unlocks level 3.

[connor]

3 minutes ago, jcstahl1 said:

Having being a person that has played the game in the arcade, yes.  On an original arcade machine, there is no level select untill you complete the first level.  Even then, it only unlocks level 2.  After completing level 2, it then unlocks level 3.

No i played it at the arcades the map always displayed first stop giving false information to people.

also i see you finally realized after days there’s no “2 dumps” of 3.02 but a file to edit

apparently when you use your brain good things happens😏

[jcstahl1]

2 minutes ago, connor said:

No i played it at the arcades the map always displayed first stop giving false information to people.

also i see you finally realized after days there’s no “2 dumps” of 3.02 but a file to edit

apparently when you use your brain good things happens😏

I've knows about this for months.  I've been playing this version with TP since it was supported, and with demulshooter before that.  There's lots of other settings that can be changed as well.  You just "coincidentally" found it the same day I mentioned knowing of it's existence in 1cc. 

 

Hmmm..... Go away RRZ.  Everyone sees through your bullshit, and there's a reason you keep getting banned from everywhere.  I've wasted enought time on you. 

 

Share with the community, contribute to it in even some small way, or just sit down and shut up.

[miao8yu5]

29 minutes ago, OutSideR said:

https://pixeldrain.com/u/dCEBCQp4

Thank you, man.

[scooby]

@jcstahl1: Thank you very much. You are always ready to help others, this is greatly appreciated.

Just one additional question: did you use the exe that comes with the 3.02 dump or the one coming from the 2.6?

When I try to launch the 3.02 exe, I have a "Please Insert the dongle" error message from the game.

[S.G.D]

53 minutes ago, jcstahl1 said:

 

Conor, you're the one who brought up this dump existing and working with TP, so why don't you reupload and share it for the community?  Instead of just trying to flex on emuline for some weird internet clout.

i'm wondering the same 

[connor]

Ofc the exe from 3.02 oh man🤦 

guys use your brain! lol

[scooby]

Ok but as I said, this exe produced a dongle error. So, best way is to explain to everyone how to perform, it would be better for the community, as you said.

 

[jcstahl1]

yeah connor, share your information with the community since you're such a valued member of it.

[connor]

3 minutes ago, scooby said:

Ok but as I said, this exe produced a dongle error. So, best way is to explain to everyone how to perform, it would be better for the community, as you said.

Lol since you asked so nicely i’ll explain simply rename it.

see? was that so hard to figure it out yourself?

[S.G.D]

thanks a lot jcstahl1  you done what RRZ=connor don't

connor/RRZ WE LIKE  TO HELP AND SHARE EACH OTHER HERE AND NOT TO ( PRETENDING I HAVE A SECRET AND I'M NOT TELL YOU)

KEEP YOUR KNOWLES FOR YOUR SELF IF YOU DON'T WANT TO HELP AND BE ANNOYING. IS MORE PLACES TO GO CHATTING IF YOU WANT TO BE LIKE THIS

ps

sorry wildwolf

sorry for my english is not my born language

[jcstahl1]

26 minutes ago, S.G.D said:

thanks a lot jcstahl1  you done what RRZ=connor don't

connor/RRZ WE LIKE  TO HELP AND SHARE EACH OTHER HERE AND NOT TO ( PRETENDING I HAVE A SECRET AND I'M NOT TELL YOU)

KEEP YOUR KNOWLES FOR YOUR SELF IF YOU DON'T WANT TO HELP AND BE ANNOYING. IS MORE PLACES TO GO CHATTING IF YOU WANT TO BE LIKE THIS

ps

sorry wildwolf

sorry for my english is not my born language

Don't waste your time and energy.  It's pointless.  Best case scenario is he gets banned here again, and he shows up a few hours later with a new alt account.  He does it contstantly everywhere.  There's a reason he gets banned in most discord servers.

Modifié le 3 décembre par jcstahl1

[WildWolf]

If you have information or the possibility of helping other members who are having more difficulty, help them ?
There is no benefit in not doing it unless you want to create a bad atmosphere. Also tell yourself that you are not safe from also struggling on another dump,
maybe the person who is struggling here will help you on another game... don't make me use sanctions. Be an Adult... (last warning)

[jimiz]

I think not work , I try to change and rename files from and to 2.06 (undongle working by tkp running)  but nothing to do , seem to be locked )
if You found a way , explain to all. thanks

[connor]

8 minutes ago, jimiz said:

I think not work , I try to change and rename files from and to 2.06 (undongle working by tkp running)  but nothing to do , seem to be locked )
if You found a way , explain to all. thanks

What?

simply rename 3.02 you don’t need 2.06 clean dump game files at all.

[S.G.D]

this is v-mans link i didnt test yet

https://qiwi.gg/file/6DMF0574-NightHunter-AfterDarkCapitre2V3

[miao8yu5]

28 minutes ago, jimiz said:

I think not work , I try to change and rename files from and to 2.06 (undongle working by tkp running)  but nothing to do , seem to be locked )
我认为不起作用，我尝试从 2.06 更改和重命名文件（undongle 通过 tkp 运行工作），但无事可做，似乎被锁定了）
if You found a way , explain to all. thanks
如果你找到了方法，就向所有人解释。谢谢

change qumo2.exe to qumo2_en.exe；qumo2_Data to qumo2_en_Data

then loaded it use TP

Modifié le 3 décembre par miao8yu5

[jimiz]

il y a 24 minutes, miao8yu5 a dit :

 

change qumo2.exe to qumo2_en.exe；qumo2_Data to qumo2_en_Data

then loaded it use TP

THANKS!   right now start !!  allelujaaa...but no input   (always if setting on tkp and saved)  so no key for start....     

 

[miao8yu5]

22 minutes ago, miao8yu5 said:

 

change qumo2.exe to qumo2_en.exe；qumo2_Data to qumo2_en_Data

then loaded it use TP

Maybe you need to copy all the files from the 2.0.6TP version's "game" folder to fill in the missing files, but remember, do not overwrite any existing files.

1 minute ago, jimiz said:

THANKS!   right now start !!  allelujaaa...but no input   (always if setting on tkp and saved)  so no key for start....     
谢谢！现在开始！！阿利路亚...但是没有输入（如果在 TKP 上设置并保存并保存，则总是如此），因此没有开始键......

 

set input in tp，I’ve tried it, and it works fine.

[jimiz]

THANKS!  yes I have to reset tkp, now input work again...
perfekt.

 

 

[mamefan1]

@jimiz I've had a lot of games where the input doesn't work. when this happens restart TP, or try a reboot.