[Arcade PC] Night Hunter After Dark II v2.06 (UNIS Technologies) TP Ready

[erdoboy43]

On 12/3/2024 at 10:51 AM, OutSideR said:

https://pixeldrain.com/u/dCEBCQp4

Thanks a lot for this, however when i try and launch the game I receive the following error (see screenshot). I have selected 1920 x 1080 in tp, that's what my monitor is set at and my scaling is set at 100%. Can anyone help please? Thank you.

[jcstahl1]

43 minutes ago, erdoboy43 said:

Thanks a lot for this, however when i try and launch the game I receive the following error (see screenshot). I have selected 1920 x 1080 in tp, that's what my monitor is set at and my scaling is set at 100%. Can anyone help please? Thank you.

open regedit at the highlighted location, right click on the highlighted registry file and delete it.  after that start your game and everything should be working.

Modifié le 4 décembre 2024 par jcstahl1

[erdoboy43]

16 minutes ago, jcstahl1 said:

open regedit at the highlighted location, right click on the highlighted registry file and delete it.  after that start your game and everything should be working.

Thanks very much that works,however my controls in TP are not working now and I can not insert credits or start the game. I have come out of TP and gone back in but still the same.  I have selected rawinput and I am using a mayflash dolphin bar set to mode 2. Thank you for any help.

[connor]

8 minutes ago, erdoboy43 said:

Thanks very much that works,however my controls in TP are not working now and I can not insert credits or start the game. I have come out of TP and gone back in but still the same.  I have selected rawinput and I am using a mayflash dolphin bar set to mode 2. Thank you for any help.

If 2.06 worked for you think about the simple fact 3.02 needs the same extra files…..

[jcstahl1]

22 minutes ago, erdoboy43 said:

Thanks very much that works,however my controls in TP are not working now and I can not insert credits or start the game. I have come out of TP and gone back in but still the same.  I have selected rawinput and I am using a mayflash dolphin bar set to mode 2. Thank you for any help.

delete the game from TPUI game library, and re-add it again & redo all your controls and it should work perfectly.

[erdoboy43]

32 minutes ago, jcstahl1 said:

delete the game from TPUI game library, and re-add it again & redo all your controls and it should work perfectly.

Thank you, however I deleted the xml file from user profiles and re-added the game in TP. I then changed the controls, but i can still not start the game or add credits. I also tried coming out of tp and going back in again.

[connor]

26 minutes ago, erdoboy43 said:

Thank you, however I deleted the xml file from user profiles and re-added the game in TP. I then changed the controls, but i can still not start the game or add credits. I also tried coming out of tp and going back in again.

👆

[jcstahl1]

1 hour ago, erdoboy43 said:

Thank you, however I deleted the xml file from user profiles and re-added the game in TP. I then changed the controls, but i can still not start the game or add credits. I also tried coming out of tp and going back in again.

in the 3.0.2 folder, delete the entire BepInEx folder.  copy that same folder from your 2.0.6 folder, into the 3.0.2 folder and it should work.  not at PC to test, and not using the same dump as mostly everyone else is from Vman's site as it's full of junk files from another launcher.

[erdoboy43]

15 minutes ago, jcstahl1 said:

in the 3.0.2 folder, delete the entire BepInEx folder.  copy that same folder from your 2.0.6 folder, into the 3.0.2 folder and it should work.  not at PC to test, and not using the same dump as mostly everyone else is from Vman's site as it's full of junk files from another launcher.

Thanks so much, I got it working. Nice one mate, really helpful.

[cander19]

I'm struggling to get v3.0.2 working in TP. v2.0.6 works well. If I use the v3.0.2 from link above and change quon2.exe to quon2_en.exe and change data folder same way, it says to add the BepInEx folder. So, I take the v2 folder and place it into v3. Game then loads but says I/O error see attendant or something like that. I then took any file from v2 and copied it to v3 without overwriting anything that was already there. Same issue. Is there something obvious I'm messing up? Is there a complete v3 dump somewhere that doesn't require anything from the v2 dump?

[cardet]

On 12/4/2024 at 5:00 AM, erdoboy43 said:

Thanks a lot for this, however when i try and launch the game I receive the following error (see screenshot). I have selected 1920 x 1080 in tp, that's what my monitor is set at and my scaling is set at 100%. Can anyone help please? Thank you.

Same problem here

 

Edit: working now

Modifié le 14 décembre 2024 par cardet

[chrisino]

Doesn't work.  Followed the exact installation instructions.  The cursor/crosshair doesn't go all the way to the right so you can't hit enemies in the far right of the screen.  Mentioned this in the tp discord but not found someone to acknowledge that it doesn't work for everyone.  Deleted the key from the registry, followed the set up of windowed and custom res of 1920 x1080.  Still doesn't run full screen.  Very frustrating.

Modifié le 29 décembre 2024 par chrisino

[tazzz013]

On 12/29/2024 at 12:25 PM, chrisino said:

Doesn't work.  Followed the exact installation instructions.  The cursor/crosshair doesn't go all the way to the right so you can't hit enemies in the far right of the screen.  Mentioned this in the tp discord but not found someone to acknowledge that it doesn't work for everyone.  Deleted the key from the registry, followed the set up of windowed and custom res of 1920 x1080.  Still doesn't run full screen.  Very frustrating.

Have you tried these settings?

[chrisino]

Yes. Many times. Displays full screen but the cross hair doesn't allow you to move it all the way to the right so enemies on the far right can't be killed. Would anyone mind zipping their working set up of the game somewhere for me to test? If it doesn't work then I know it's some other issue such as hardware etc or my actual display. 

[lords]

10 hours ago, chrisino said:

Yes. Many times. Displays full screen but the cross hair doesn't allow you to move it all the way to the right so enemies on the far right can't be killed. Would anyone mind zipping their working set up of the game somewhere for me to test? If it doesn't work then I know it's some other issue such as hardware etc or my actual display. 

Here  you go.....HERE I run it 250X1440 my sinden hit all corners with no issues....to start out fresh del the game from tp menu...x out of TP... open 

tp ad game .set controls and settings.

 

P.S Tazzz013 you have your width and height backwards...but custom is unchecked so it wont matter.....

Modifié le 7 janvier par lords

[chrisino]

Thanks for this. Very kind.

[slashguns04]

help night hunter 3.0.2 error I/O board disconnect

[markb]

got v3.02 to run . Please insert the dongle and restart the game

 

any idea where i can get the dongle info

 

Modifié le 6 mars par markb

[jcstahl1]

11 hours ago, markb said:

got v3.02 to run . Please insert the dongle and restart the game

 

any idea where i can get the dongle info

 

you don't need the dongle info.  you need a different dump that has the dongle check removed.

[markb]

anyone got the proper version of v3.02 that works with tp

[mickael28]

2 hours ago, markb said:

anyone got the proper version of v3.02 that works with tp

I got it working in TP passing the I/O error by getting both versions, then copying all files from v2.0.6 into the v3.0.2 folder (but without overwriting any, just adding what was missing)

[Sky25es]

Fix for enemies not visible in resolutions other than 1920x1080.

 

Caution! Only tested with Demulshooter as standalone! Always back up the file just in case!

 

I don't know if there is much interest in this, normally no one mentions anything but here it goes...

First of all, my reasons. I play on an arcade machine, and the maximum screen resolution I can use is 800x600. That's why I'm constantly looking for fixes for newer games to be able to play them at those low resolutions (and I almost always succeed). 

In this game, the problem is that enemy positions are calculated for a fixed resolution of 1920x1080. However, this can be fixed for any other resolution.

Instructions: 

1. Open the config folder and find the config_screen_pos.txt  file.

   Create a folder, i.e. "Backup", and copy the above file there for backup and to have an original reference when modifying the original file.

 

2. Open the file inside the config folder (not the backup) with a text editor (Notepad, for example).

     Inside the file, there are a series of lines like this: ATTACK_SCREEN_POS_15 = 1100,400,3. The first number, 1100, refers to the horizontal position within 1920p

       horizontal resolution, and the second  number is  the vertical position within 1080p vertical resolution.

 

3. Now for some simple math. Let's take i.e a desired resolution of 800x600, take 800 and divide by 1920, and then take 600 and divide by 1080.

      800:1920=0.4166

     600:1080=0.555
     Write down these two numbers on a piece of paper.
     In the line mentioned above: ATTACK_SCREEN_POS_15 = 1100,400,3, we take 1100 and multiply it by 0.4166, and we take 400 and multiply it by 0.555.
     1100x0.4166=458.26
     400x0.555=222
      In the case of 458.26, we must round (no decimals) to 458.
      Change it accordingly in the mentioned line:  ATTACK_SCREEN_POS_15 = 458,222,3
      All lines must be changed. The positions that contain only a 0 digit, of course, are not changed.

      That's it...

 

      If anyone modifies the file for a specific resolution, please upload it to share it with the rest. Thanks. 😉

 

     Btw. For a correct aspect ratio with 4:3 resolutions, even if your real screen resolution is i.e. 800x600, put a 16:9 resolution ingame. For this example: 800x450,

     otherwise there will be not black bars and you'll see some graphical glitches.

 

      Here are my files for the 800x600 resolution for both versions, 2.0.6 and 3.0.2

 

800x600fix.zip

Modifié il y a 19 heures par Sky25es
Small fix

[nosoucy62]

who tested this apart from Sky25es ?