Picmatic Marbella Vice

[nosoucy62]

sorry same problem : no haircross and no controls

sorry i read your post "not with mouse only"......

i tested with my wiimote later

thanks

[nosoucy62]

 

i don't have "mouse compatible HID" but "souris IHM"

[Satanicainc]

Are you using a wiimote as lightgun? How are you using the wiimote? With Dolphin Mayflash bar?  What kind of mouses do you have in your system?

Modifié le 10 février par Satanicainc

[nosoucy62]

hi !

i'm using a wiimote with dolphin mayflash bar in mode 2 in my PC gamers and a mouse in USB

when i select a mouse windows ou mouse gaming i have the same problem : no inputs and no crosshair

this is a picture of option inputs :

 

[eljose]

i have onlly 'windows mouse' not windows HID compatible 😞 but is not working the game

[emulor]

There is a simple solution to solve problems with select controls (mouse/gun):

Go to Imput options select configuration #1 and click on "test" button.

Press any key on gun/mouse, the WinUAE automatic sellect correct devide and you will see the input key flash on "input source".

Press F12 tio exit from test mode.

Select "Device Enabled" after all

Save configuration and teste in game.

 

2 problems to me:

shot is not sync on screen

can't remove crosshair (I dont like play with crosshair)

 

And thanks to all make this game possible to play!

Modifié le 11 février par emulor

[Satanicainc]

For shot is not sync on screen you need to calibrate it on the service menu.

 

Start the game, without insert coins press the key asigned to service menu (0 in my configuration). Move between menus with Left Start and Right Start, go to the "Prueba pistolas menu"

 

 

Select "Haz Prueba" and the "Alinea"

 

 

Align the crosshair to the target and shoot

 

exit the menu and go to "Salir" menu and press "Haz prueba" to save changes into NVRAM and exit service menu

 

 

For disable crosshairs, open the Marbella Vice [Picmatic].uae file in the Configurations Folder and add the following line at the end of the file:

 

lightpen_crosshair=false

 

 

[nosoucy62]

sorry nothing works.....

[nosoucy62]

Il y a 4 heures, emulor a dit :

There is a simple solution to solve problems with select controls (mouse/gun):

Go to Imput options select configuration #1 and click on "test" button.

Press any key on gun/mouse, the WinUAE automatic sellect correct devide and you will see the input key flash on "input source".

Press F12 tio exit from test mode.

Select "Device Enabled" after all

Save configuration and teste in game.

 

2 problems to me:

shot is not sync on screen

can't remove crosshair (I dont like play with crosshair)

 

And thanks to all make this game possible to play!

I tested with the instructions but it doesn't work at all.

no pointer and no crosshair....

with button test i see the input source ok with mouse and after i select "device enable" and save but nothing when i launch game......

 

[eljose]

in " probando pistolas' nothing appears 😞 i push "alinea" but there is no crosshair nor gun , can not shoot

[Satanicainc]

You must load the Marbella Vice configuration from the WinUAE emulator configurations menu, after that enable and configure your pointer device in the input menu and the save again the configuration. Close the emulator and run the ahk again

[nosoucy62]

sorry satanicainc same problem........no pointer and no shoot......

 

look the input config ....same as you

[nosoucy62]

Il y a 12 heures, eljose a dit :

in " probando pistolas' nothing appears 😞 i push "alinea" but there is no crosshair nor gun , can not shoot

hi eljose !

this game work on your PC with crosshair ?

 

[eljose]

NO 😞 without crosshair and i can not shoot the screen 😞 

[Satanicainc]

4 minutes ago, eljose said:

NO 😞 without crosshair and i can not shoot the screen 😞 

Could you share you configuration please?

 

Remember, if you run first the emulator and not the AHK, you MUST load the Marbella Vice [Picmatic] configuration

On 2/11/2024 at 9:16 AM, nosoucy62 said:

hi !

i'm using a wiimote with dolphin mayflash bar in mode 2 in my PC gamers and a mouse in USB

when i select a mouse windows ou mouse gaming i have the same problem : no inputs and no crosshair

this is a picture of option inputs :

 

 

To check what device Winuae is detecting, open Winuae, load the Marbella Vice configuration, do the process explained by emulor. Configure it (X axis must be Lightpen Horizontal, Y must be Lightpen Vertical, Button 1 must be American Laser Games/Picmatic Left Trigger) and remember to mark Device enabled on the right upper corner. And after this process go to configurations menu again and press SAVE button.

[eljose]

[Satanicainc]

16 minutes ago, eljose said:

 

You don't have loaded the Marbella Vice configuration, please read my messages carefully

[eljose]

i went to config " Marbella vice" and pushed the button 'Load' i can see the crosshair in 'probando pistolas' but can not shoot or move it

Modifié le 12 février par eljose

[Satanicainc]

32 minutes ago, eljose said:

i went to config " Marbella vice" and pushed the button 'Load' i can see the crosshair in 'probando pistolas' but can not shoot or move it

Let's see, dude. You seem very lost.

 

Let's take it step by step,

 

1. Open Winuae.exe

2. Go to Configurations and select Marbella Vice [Picmatic]. Press LOAD button

3. Go to Input menu, check the first drop-down menu says "Configuration #1"

4. Push the TEST button on the right bottom

5. Press your lightgun trigger or mouse left button and check what device is highlighted

6. Enable the highlighted device (check the Enable Device on upper right)

7. Map the device as follow:

       X - Lightpen Horizontal

       Y - Lightpen Vertical

       Button 1 - American Laser Games/Picmatic Left Trigger

 

8. Go to Configurations Menu again and press SAVE button

9. Start the game, and remember that Left Player start is key 1

 

 

         X - 

[eljose]

whenefver i go to test it changes from 'mouse' to 'HID mouse' and can not 😞 test the buttons should i remap them ?

[Satanicainc]

14 minutes ago, eljose said:

whenefver i go to test it changes from 'mouse' to 'HID mouse' and can not 😞 test the buttons should i remap them ?

 

If the HID Mouse has no mapping, follow my instructions and remap as I said before

[eljose]

i have 'windows mouse' if i go to 'test' the device changes to 'mouse with HID' and i can not enable mouse with HID

 

 

 

[emulor]

You must choose "Configuration #1"  for "Device Enabled" be active

The problem many have was because bad device choose.

Use test button for choose device, and assign a Lightpen Horizontal, Lightpen Vertical and American Laser Games/Picmatic Left Trigged like Satanicainc write. and SAVE configuration.

If you can't choose correct device goto configuration folder and open marbela vice configuration with notepad.

Inside file you will see all your devices, compare them ID with devices on control panel. With thisi way you see devices with no mistakes.

[nosoucy62]

thanks emulor and satanicainc !!

now it works with "enable device" is check !

the last problem : I cannot adjust the crosshair by pressing the 0 key to access TEST MENU to calibrate it on the service menu. 

THANKS FOR YOUR HELP ...this game is very rare

[nosoucy62]

finally with key "0" access menu test ok....

but the calibrate don't work However, I do as instructed......

[lezzi87]

Same for me, the left mouse click makes the screen flash but does not fire the gun, this is both in the game and in the test menu.

Modifié le 12 février par lezzi87

[Satanicainc]

Take into account the following:

 

Yellow crosshair is Left Player, so you have to start the game with key 1

Blue crosshair is Right Player, so you have to start the game with key 2

 

If you are moving the yellow crosshair in service menu, check that your device has assigned Lightpen Horizontal, Lightpen Vertical AND American Laser Games/Picmatic LEFT TRIGGER

 

If you are moving the blue crosshair in service menu, check that your device has assigned Dual Lightpen Horizontal #2, Dual Lightpen Vertical #2 AND American Laser Games/Picmatic RIGHT TRIGGER

 

[eljose]

i have the 'blue screen porblem 'again 😢   no matter if i use the .ahk or the winuae to execute the game , blue screen is there, i yes i have the folder 'videos' with the game inside

[nosoucy62]

Il y a 10 heures, Satanicainc a dit :

Take into account the following:

 

Yellow crosshair is Left Player, so you have to start the game with key 1

Blue crosshair is Right Player, so you have to start the game with key 2

 

If you are moving the yellow crosshair in service menu, check that your device has assigned Lightpen Horizontal, Lightpen Vertical AND American Laser Games/Picmatic LEFT TRIGGER

 

If you are moving the blue crosshair in service menu, check that your device has assigned Dual Lightpen Horizontal #2, Dual Lightpen Vertical #2 AND American Laser Games/Picmatic RIGHT TRIGGER

 

perfect Satanicainc !!!

if i launch the game with "2" the shoot and the calibrate works !!

with "1" crosshair ok but no calibrate (normal because it's the P2 and not P1)....

thanks for your help!!!!!!!!!!!

[eljose]

could someone upload the emulator with ALL configured 😄 please ? so is just push the .ahk file and load the game

[HVG]

Il y a 4 heures, eljose a dit :

could someone upload the emulator with ALL configured 😄 please ? so is just push the .ahk file and load the game

You can find it a few posts back. It is up to date and has the best video version currently available.

You need to download telegram on your computer

[eljose]

En 9/2/2024 a las 12:49, HVG dijo:

A playable version of Marbella Vice is now available:

 

Marbella Vice playable

i have telegram in my phone which is the channel to download the game ?

[eljose]

got the game working from INSTAGRAM if the author gives me permission i will upload it 😄 😄 thanks for all

[lezzi87]

21 hours ago, Satanicainc said:

Take into account the following:

 

Yellow crosshair is Left Player, so you have to start the game with key 1

Blue crosshair is Right Player, so you have to start the game with key 2

 

If you are moving the yellow crosshair in service menu, check that your device has assigned Lightpen Horizontal, Lightpen Vertical AND American Laser Games/Picmatic LEFT TRIGGER

 

If you are moving the blue crosshair in service menu, check that your device has assigned Dual Lightpen Horizontal #2, Dual Lightpen Vertical #2 AND American Laser Games/Picmatic RIGHT TRIGGER

 

Thanks every works great now. What's the best mouse configuration for Fast Draw Shodown in horizontal?

[Satanicainc]

Remember my link:

 

https://archive.org/details/winuae_alg_picmatic

 

I upload some changes on the configurations and added bezels

[nanometrovovo2]

Hyperspin theme

 

if someone can redraw make png with alpha from these images, I can make something better

 

[S.G.D]

2 hours ago, nanometrovovo2 said:

Hyperspin theme

 

if someone can redraw make png with alpha from these images, I can make something better

 

 

 

Modifié le 14 février par S.G.D