Aller au contenu

[ARCADE PC] Elevator Action Invasion (UNIS-TAITO)


mes211

Messages recommandés

26 minutes ago, Old John said:

Got the game running thanks to this thread, am just wondering if anyone got this working with a sinden gun ?

Worked good with my sinden...crosshair didn't match up but just ignored that for now...

Lien vers le commentaire
Partager sur d’autres sites

5 hours ago, Old John said:

Got the game running thanks to this thread, am just wondering if anyone got this working with a sinden gun ?

I got the game to play and aim correctly on horizontal monitor with Sinden by running windowed mode as Argonlefou suggested. Then, I use an ahk to apply a bezel. I have added the method I used to the Sinden Wiki.

Lien vers le commentaire
Partager sur d’autres sites

On 6/6/2023 at 9:01 PM, YoBoys said:

Not sure if I hit submit or it was deleted...

Gun cursor moves slow when going far left or right edge, Using Arccabview for bezels and demulshooter with 2 gun4ir

Did you manage to resolve this? I am having the same issue.

Lien vers le commentaire
Partager sur d’autres sites

2 hours ago, Zen_B7 said:

So, use the mirror link, if blocked region, use VPN

Here the mirror link

https://uptobox.com/v0hh2lq6kiwm

When you got it, take the effort to mirror it on mega, or wherever you want, for the community, and post that link here.

VPNs aren't for everyone. They take too much unnecessary setup and even then only half of them work when you want them to. Some of the best ones require an additional subscription as well.

 

Posts that encourage users to use a VPN hurt more than help.

Lien vers le commentaire
Partager sur d’autres sites

3 minutes ago, Hydreigon said:

VPNs aren't for everyone. They take too much unnecessary setup and even then only half of them work when you want them to. Some of the best ones require an additional subscription as well.

 

Posts that encourage users to use a VPN hurt more than help.

Aha .....

🤨

Well use Opera webbrowser, open a private page, activate FREE vpn and enjoy !

Easy enough, even free !

https://www.opera.com/features/free-vpn

 

Lien vers le commentaire
Partager sur d’autres sites

22 hours ago, YoBoys said:

@bojo5150 would greatly appreciate some help. I have zero knowledge of mamehooker

 

Then don't use mamehooker, use whatever method you normally use to switch between 4:3 & Fullscreen. Sample ahk below. Change the devnumbers to whatever your guns com ports are. Delete the 2nd gun if you only have 1.

 

run, SerialSend.exe /baudrate 9600 /devnum 1 "M3x1M8x2M10x53"
run, SerialSend.exe /baudrate 9600 /devnum 2 "M3x1M8x2M10x53"

~ESC::
run, SerialSend.exe /baudrate 9600 /devnum 1 "E"
run, SerialSend.exe /baudrate 9600 /devnum 2 "E"
ExitApp
return

SerialSend.exe

Lien vers le commentaire
Partager sur d’autres sites

18 hours ago, Hydreigon said:

VPNs aren't for everyone. They take too much unnecessary setup and even then only half of them work when you want them to. Some of the best ones require an additional subscription as well.

 

Posts that encourage users to use a VPN hurt more than help.

Wow...Really...you forgot where your at? I use Avira Phantom VPN...free of course....2 buttons to seup...I think you need to learn a bit more before you diss a post ...I don't need a repy back..believe me..I won't answer it..learn my friend learn...this forum has some lazy people that just want games working handed to them...be lucky there is even is a site like this to help...

Modifié par lords
Lien vers le commentaire
Partager sur d’autres sites

On 6/11/2023 at 11:46 PM, bojo5150 said:

 

Then don't use mamehooker, use whatever method you normally use to switch between 4:3 & Fullscreen. Sample ahk below. Change the devnumbers to whatever your guns com ports are. Delete the 2nd gun if you only have 1.

 

run, SerialSend.exe /baudrate 9600 /devnum 1 "M3x1M8x2M10x53"
run, SerialSend.exe /baudrate 9600 /devnum 2 "M3x1M8x2M10x53"

~ESC::
run, SerialSend.exe /baudrate 9600 /devnum 1 "E"
run, SerialSend.exe /baudrate 9600 /devnum 2 "E"
ExitApp
return

SerialSend.exe 52.72 kB · 13 downloads

Thanks that worked awesome.

Lien vers le commentaire
Partager sur d’autres sites

I can start the game and shoot, but I can't move the crosshair, it's in the upper left corner.

Any solution?

Lien vers le commentaire
Partager sur d’autres sites

On 6/19/2023 at 8:05 AM, LongnPlay said:

I can start the game and shoot, but I can't move the crosshair, it's in the upper left corner.

Any solution?

What  are you using  for a lightgun?

Lien vers le commentaire
Partager sur d’autres sites

10 hours ago, lords said:

What  are you using  for a lightgun?

 

Mouse

Lien vers le commentaire
Partager sur d’autres sites

25 minutes ago, LongnPlay said:

 

Mouse

Well the sinden lightgun acts like a mouse.....but i have no issues with games...Maybe it is a setting thats stopping you from moving the mouse in game.plus most of these games are made for lightguns...sorry that's al i got...

Lien vers le commentaire
Partager sur d’autres sites

On 6/25/2023 at 3:29 PM, Safur said:

I have the same issue and nothing work.

Try to delete the game from TP(so it deletes the .XML) then re add the game...setup the controllers ...I being in the upper corner with no response .means it's not seeing the mouse as a shooter(gun).

5 hours ago, lords said:

Try to delete the game from TP(so it deletes the .XML) then re add the game...setup the controllers ...I being in the upper corner with no response .means it's not seeing the mouse as a shooter(gun).

All I did was switch to my mouse and set trigger to left click and it worked.....Maybe you have a bad copy....woorks great with a mouse...mine is a 1 dongle to control my mouse and keyboard...

TeknoParrot UI 1.0.0.1039 6_26_2023 1_26_33 PM.png

Modifié par lords
Lien vers le commentaire
Partager sur d’autres sites

On 6/8/2023 at 10:22 AM, arcade_power said:

You have to start the game first (let the attract mode stay for a short while) then ALT+TAB out of the game and run "EA_Invasion_Inputs" (ALT-TAB back into game) and the mouse should work fine.

Or do this LongnPlay and Safur as arcad_power stated if not running TP...

Modifié par lords
Lien vers le commentaire
Partager sur d’autres sites

For people that are new to this

you can either choose to play it with tp

as patreons or play it with a mouse or light gun free

all info needed is already in the thread 

as usual just read and you’ll know all that’s needed 

Modifié par Frank1
Lien vers le commentaire
Partager sur d’autres sites

On 6/6/2023 at 10:47 AM, hippopippo said:

Hey Boss!

 

How do we enable the "extreme content (gore)" to enable? Would really like red blood if possible rather than the green stuff 😘

Lien vers le commentaire
Partager sur d’autres sites

Il y a 3 heures, Safur a dit :

The crosshair is aligned on Y axis but not with X axis. Actually it take into account all the screen and the game has black borders in 16/9.

That's why it is not aligned on X axis.

Do you have a solution with that?

 

If you're using DemulShooter you can try playing with a option, you can add

 

-ForceScalingX=9/16

 

into the command line and play with the ratio. 9/16 should be good in theory but some people needed to put 32/9.....play with the numbers and you'll see how the crosshair will be more accurate or not

Only working with the latest release, option was not in DemulShooterX64 before

 

Il y a 3 heures, gStAvEn a dit :

Hey Boss!

 

How do we enable the "extreme content (gore)" to enable? Would really like red blood if possible rather than the green stuff 😘

 

The only information I got on the internet about that "Gore" mode seem to allow the engine to dismember characters.

Blood color looks like a splatter/effect/shadder created by the engine, where the parameters (shape, color, strenght, etc..) lies somewhere in the resource file (I guess). But as it's not a drawing or a color image....it's not that easy to find (especially when you have no knowledge at all in Unreal Engine modding or programming)

Modifié par argonlefou
Lien vers le commentaire
Partager sur d’autres sites

The gore disabled issue kinda reminds 

me of samurai 2019 missing gore of the arcade version 

never found a patch of red blood for it and elevator invasion as well

the gore makes games a lot more fun and realistic 

Modifié par Frank1
Lien vers le commentaire
Partager sur d’autres sites

Le 06/06/2023 à 00:37, dante3732 a dit :

1. Download "ArcCabView_ReShade_Launcher_generic_2.6".

2. Unpack to "ElevatorActionInvasion\ESGame\Binaries\Win64" directory.

3. Run ArcCabView_Launcher.

4. Choose ESGame-Win64-Shipping.exe  2 times.

5. Press OK.

5. Enter any profile name and press ok.

6. Choose portrait mode.

6. ArcCabView started game 1 time, after it press ok.

7. In next time use "ArcCabView_Launcher" to launch game.

8. After loading game, minimize window and start EA_Invasion_Inputs.exe .

  Révéler le contenu masqué

PreprocessorDefinitions=


Techniques=ArcCabView
TechniqueSorting=ArcCabView

[ArcCabView.fx]
aperture_type=2
BEZEL_BACK=0
CROP_OFF=0
CRT_EFFECT=0
CRT_EFFECT_OFF=0
CURVATURE=0
CURVATURE_OFF=0
EXPAND_CROP=0
EXT_DISPLAY=1
NO_ROTATE=0
USE_BEZEL=1
USE_BEZEL_OFF=0
USE_FRAME=0
USE_FRAME_OFF=0
GameVideo_resolution=0,0
CenterLocked_ratio=0.000000,0.000000
InGame_ratio=1080.000000,1920.000000


 

And i edit bezel, to delete frame.

 

For custom bezel, after first launch need:

1. Open "ElevatorActionInvasion\ESGame\Binaries\Win64/ArcCabView\UserPresets" directory.

2. Copy name profile for example "Elevator Action_h.ini"

3. Open "ElevatorActionInvasion\ESGame\Binaries\Win64/ArcCabView\Textures" directory.

4. Create  folder with profile name, i have "Elevator Action"

5. Copy bezel.png in this folder.

 

 

 

 

 

bezel.png

bezel.7z 2.14 Mo · 99 téléchargements

 Salut,svp quand je choisis 

1 Run ArcCabView_Launcher.

2 Choose ESGame-Win64-Shipping.exe  2 times.

3 Press OK.

4 Enter any profile name and press ok.

Après j’ai pas J’arrive pas à afficher la fenêtre pour choisir le  portrait mode.🥲🥲😔🙏?

Lien vers le commentaire
Partager sur d’autres sites

Simple Script in ark to launch arccabview + Mouse input fix:

 

Run, ArcCabView_Launcher.exe
Sleep 20000
Run, EA_Invasion_Inputs.exe


Escape::
    Process,Close,ArcCabView_Launcher.exe
    Process,Close,EA_Invasion_Inputs.exe
    ExitApp
return

 

- Install  Autohotley 

- click right button>new>autohotkey script

- create script in Elevator Action Invasion Arcade\ESGame\Binaries\Win64

- click right button>compile script

- run exe created in admin mode

- press Esc to close everything when finish to play

Lien vers le commentaire
Partager sur d’autres sites

On 6/30/2023 at 4:01 AM, Safur said:

The crosshair is aligned on Y axis but not with X axis. Actually it take into account all the screen and the game has black borders in 16/9.

That's why it is not aligned on X axis.

Do you have a solution with that?

Are you running TP? If so need to run windowed and uncheck the black borders so it is just the game. Aim is fine. I brought this up on discord so hopefully it is resolved “fullscreen.”  No big deal as I can add my own bezel. Waiting for the “elevator door” animation. Hopefully soon. 

Lien vers le commentaire
Partager sur d’autres sites

Il y a 4 heures, crapato a dit :

bonjour a tous, je n'arrive a faire fonctionner Reshape pour les bordures sur elelevator action pour mon sinden, quand j'appuie sur la touche home pendant le lancement il n' y a que arccabview qui ressort et vous?

 

Bonjour, pour ce jeux si tu utilise ton écran en mode paysage classique, tu peux intégrer les bordures blanches dans un Bezel pour éviter de laisser l'écran noir, il y en a de très beau dans le fils du sujet.

Lien vers le commentaire
Partager sur d’autres sites

Le 24/06/2023 à 13:05, WildWolf a dit :

for patreon games yes

 

Il y a 12 heures, Monky a dit :

 

Bonjour, pour ce jeux si tu utilise ton écran en mode paysage classique, tu peux intégrer les bordures blanches dans un Bezel pour éviter de laisser l'écran noir, il y en a de très beau dans le fils du sujet.

très bien,  je regarde ça de plus près,  merci a toi 

Lien vers le commentaire
Partager sur d’autres sites

Veuillez vous connecter pour commenter

Vous pourrez laisser un commentaire après vous êtes connecté.



Connectez-vous maintenant
×
×
  • Créer...