Aller au contenu

[Emu] PS2 & Namco System 147 / 148 / 246 / 256 Emulation on Play!


Shin Endymion

Messages recommandés

tall the low fps and the audio stuttering is due to the incompatibility  - at the moment this play!  it's still very wip so there are areas that for example aren't fully emulated i class cobra as ingame status - time crisis 3 and 4 in game for example - the cobra stage 1 casino area is full of garbled bloom and lighting effects that tank the fps to under 30 fps ive tested on rtx3060 12gb - after that first zones clear it pops straight up to 60fps so its defo just needs more compatibility work done to  all of the games. 

also dont get too invested with any  full playthroughs on this emulator yet as the nvram/ high scores do not save after play  so they will disappear after close :0 

other than that is looking very good

Lien vers le commentaire
Partager sur d’autres sites

The weird thing about playing Time Crisis 4 on Play is there is slowdown during the game, but yet no input lag during shots, so once the compatibilities and speed issues are fixed this will be very playable! On RPCS3 where the game runs much better, the input lag is quite bad and achieving combo's is much tougher! Great to finally play Cobra!

Have you noticed playing on Vulcan the graphics are all there but at a cost of performance, but OpenGL is really messed up!

Lien vers le commentaire
Partager sur d’autres sites

13 hours ago, elaina438 said:

How should I use a mouse to play? I can't find mouse detection anywher

It will pick your mouse axis automatically, but you can set other buttons per game, so left mouse click to d-pad left , and right mouse click to triangle, that would be for cobra, vampire night would need left mouse button to O for fire

Modifié par joe555
Lien vers le commentaire
Partager sur d’autres sites

Le 2023/4/23 à AM2点19分, Universal Gaming a dit :

当它完全兼容时,我会给它 3 年的时间。 

I run smoothly because I am lucky. I only play Tekken series games. If it is other games, it is very imperfect. In addition, my high computer configuration also helps me run this game better and at a higher speed.

QQ截图20230424124530.png

Lien vers le commentaire
Partager sur d’autres sites

1 hour ago, andymage said:

I run smoothly because I am lucky. I only play Tekken series games. If it is other games, it is very imperfect. In addition, my high computer configuration also helps me run this game better and at a higher speed.

QQ截图20230424124530.png


Emulation is purely based on CPU single thread speed with rare exceptions (like Xenia, a Xbox 360 Emulator) and the 13700KF is on Top Tier on both single thread and multi thread speed for Emulation. 
Something I recommend people look at before buying a new PC for emulation is the RPCS3 CPU Tier List, the best CPUs there are the ones that offer the best performance for all emulation.

Lien vers le commentaire
Partager sur d’autres sites

il y a 28 minutes, compnwl a dit :


仿真完全基于 CPU 单线程速度,极少数例外(如 Xenia,一个 Xbox 360 仿真器),13700KF 在单线程和多线程仿真速度上都处于顶级水平。 
我建议人们在购买用于仿真的新 PC 之前先看一下 RPCS3 CPU Tier List,其中最好的 CPU 是为所有仿真提供最佳性能的。

Xenia emulator running tekken 6 is normal, but tekken tt2 is still poor

Lien vers le commentaire
Partager sur d’autres sites

9 hours ago, joe555 said:

It will pick your mouse axis automatically, but you can set other buttons per game, so left mouse click to d-pad left , and right mouse click to triangle, that would be for cobra, vampire night would need left mouse button to O for fire

Thank you very much for your reply. Yesterday, I used the Time Crisis 3 test and found that I couldn't move and shoot normally

Today's direct Test time crisis 4, the mouse function is normal and can move and shoot

Modifié par elaina438
Lien vers le commentaire
Partager sur d’autres sites

On 24/04/2023 at 03:42, andymage said:

Xenia emulator running tekken 6 is normal, but tekken tt2 is still poor

I'm just making a comparison between emulators, obviously to play Tekken I would never recommend Xenia.



I had never seen a gameplay of Ace Driver 3, only images but I never had an idea of the gameplay because even the footage was in low resolution, and this video here is apparently the closest to a direct capture.
 



It's funny a game that runs on PlayStation 2 hardware advertising Tekken 6 and Ridge Racer 7 that at the time should have been close to being released, but only for PlayStation 3. Apart from that apparently it uses the same cabinet model as the Wangan Midnight 3 at least the Standard One.


I also found some direct capture from the RRV Arcade Battle.
 

 

Lien vers le commentaire
Partager sur d’autres sites

On 4/24/2023 at 7:32 AM, andymage said:

no,This emulator needs a high computer configuration to run at normal speed

Step1 Mame-CHD转ISO.batStep2 ISO转CD-CHD.bat

QQ截图20230424123821.png

 

On 4/13/2023 at 7:28 AM, andymage said:

Tekken 4 does not have a right leg, that is, the fourth button does not

 

Impressive, it's cool to see that 60 fps is actually achievable at this point, my PC unfortunately doesn't run it as well, it instead is at about 50-55 fps and for some weird reason, I'm experiencing graphical issues (specifically some floor and foreground textures seem to be flickering or missing at times) that only started to occur on the latest couple of versions of this emulator, my specs are:
Intel Core i7-9700K
Gigabyte Z390 M GAMING 
Corsair Vengeance LPX 32G
GeForce RTX2070
Samsung SSD 500G 970 EVO

Lien vers le commentaire
Partager sur d’autres sites

il y a 45 minutes, lordraptor a dit :

 

令人印象深刻,看到此时实际上可以达到 60 fps 真是太酷了,不幸的是我的 PC 也没有运行它,而是大约 50-55 fps 并且由于某些奇怪的原因,我遇到了图形问题(特别是某些地板和前景纹理似乎有时会闪烁或丢失),仅在该模拟器的最新版本中才开始出现,我的规格是:英特尔酷睿 i7-9700K 技嘉 Z390 M GAMING Corsair Vengeance LPX
32G
GeForce 
RTX2070
三星
SSD 500G 970EVO

I also tested it with other computers in my house, basically the same as you said, only 50-55 frames running, my personal computer is the only one that is lucky to run Tekken at 60 frames, it shouldn't take long to simulate After updating multiple versions of the server, everyone will be at full speed

Lien vers le commentaire
Partager sur d’autres sites

  • The title was changed to [Emu] PS2 & Namco System 246 / 256 Emulation on Play!
On 4/25/2023 at 10:50 AM, andymage said:

I also tested it with other computers in my house, basically the same as you said, only 50-55 frames running, my personal computer is the only one that is lucky to run Tekken at 60 frames, it shouldn't take long to simulate After updating multiple versions of the server, everyone will be at full speed

I'll take your word for it, because with my PC, I can run Tekken 6 and TTT2 on Xenia and RPCS3 very smooth. 

Lien vers le commentaire
Partager sur d’autres sites

On 4/23/2023 at 4:03 PM, cbeluz33 said:

AceDriver 3 FinalTurn dump

???? iso ???

Lien vers le commentaire
Partager sur d’autres sites

On 4/24/2023 at 1:03 AM, cbeluz33 said:

acer3.JPG

Hey guys, Mr Guru released the AceDriver 3 FinalTurn dump but it's giving an error when loading the game, does anyone know what error this could be? thanks.

ace novo.JPG

The PLay emulator need to support it?

 

The game probably uses HDD, and you converted into a CDVD. It's a theory

Lien vers le commentaire
Partager sur d’autres sites

il y a une heure, Breaker MKV a dit :

 

Le jeu utilise probablement un disque dur et vous l'avez converti en CDVD. C'est une théorie

it's even certain I think too
But that does not change anything this game will not boot until we have the memory patch files to add in the aracdedef

 

Le 24/04/2023 à 01:03, cbeluz33 a dit :

acer3.JPG

as nouveau.jpg

L'émulateur PLAY doit le prendre en charge ?

it's even certain I think too
But that does not change anything this game will not boot until we have the memory patch files to add in the aracdedef

Lien vers le commentaire
Partager sur d’autres sites

Le 30/04/2023 à 23:35, compnwl a dit :



The only problem for me is the inputs as "Medium Kick" and "High Kick" don't works.

 

Le 30/04/2023 à 23:35, compnwl a dit :

All are the same, many games are out of control, or keys are missing

The only problem for me is the inputs as "Medium Kick" and "High Kick" don't works.

 

Lien vers le commentaire
Partager sur d’autres sites

hello, I can't get the emulator to work 😞 I have this error message every time I try 😕 someone could guide me, thank you in advance 

 

 

Capture d'écran 2023-05-02 184919.png

Lien vers le commentaire
Partager sur d’autres sites

Il y a 8 heures, yoleouff a dit :
hello, I can't get the emulator to work 😞 I have this error message every time I try 😕 someone could guide me, thank you in advance 

 

 

Capture d'écran 2023-05-02 184919.png

QQ截图20230424123821.pngYou need to convert the complete process of step 1 and step 2 for the CHD file. Both are indispensable. The final CHD file is the decrypted image file that can be recognized by the simulator.

Lien vers le commentaire
Partager sur d’autres sites

Il y a 3 heures, andymage a dit :

QQ截图20230424123821.pngYou need to convert the complete process of step 1 and step 2 for the CHD file. Both are indispensable. The final CHD file is the decrypted image file that can be recognized by the simulator.

hello, thank you for your return, I thought I had done that ^^, I recovered the original chds on archive.org then step 1 and step2. the original rom is not the archiv.org one?
Lien vers le commentaire
Partager sur d’autres sites

29 minutes ago, yoleouff said:
hello, thank you for your return, I thought I had done that ^^, I recovered the original chds on archive.org then step 1 and step2. the original rom is not the archiv.org one?

no need to do all that cdhman thing anymore...there is a link on the first page for all the dump already converted to work on play 256.

Lien vers le commentaire
Partager sur d’autres sites

Il y a 3 heures, llll55 a dit :

no need to do all that cdhman thing anymore...there is a link on the first page for all the dump already converted to work on play 256.

thank you, I tried with the chd and decompress zip folder, then I added the chd in the folder. I always have the same message, surely the zip and chd badly placed?
🥴🤭
Lien vers le commentaire
Partager sur d’autres sites

Veuillez vous connecter pour commenter

Vous pourrez laisser un commentaire après vous êtes connecté.



Connectez-vous maintenant
×
×
  • Créer...