Aller au contenu

[Arcade PC] Chunithm NEW / + / Int. / Sun / ... (S3G@ ALLS)


Messages recommandés

Posté(e)

will someone make old ver A114 to new version?

i can load all the map/icon/character

but i can't load the song

it show total 240 anima & pops
but cannot load the song cover and song

Posté(e)

a bit stuck with new+ dump when playing around, im guessing i've missed something but the setup is the exact same with the original new dump, and that seems to function correctly; bar network issues

this is running via. 

On 3/14/2022 at 2:31 AM, chunithm PC said:

i'm not getting any actual error, just closes immediately.

has anyone successfully ran new+ using this dump and can provide some insight on getting it to run ?

 

 

i'm not sure if this is intended to be an upgrade package, to be added to the original dump, or if it's its own thing? i've tried both with no luck as well.

using the files on the mirror don't extract so i can't exactly try that either

 

i haven't been successful in trying the tasoller workaround because i can't get past registration, so i just need to cross that hurdle first.

 

Posté(e) (modifié)

So NEW plus still has no network support?

I got all GOOD on network test but the network icon is gray and aime not available.

Modifié par 7zxkv
Posté(e)
Il y a 10 heures, 389891316 a dit :

[ir]
ir6=0xdd
ir5=0xdb
ir1=0xbe
ir2=0xbf
ir3=0xba
ir4=0xde

Maybe you can try this, i copied them from others segatools but i cant promise that they can run correctly


Now segatools can not use...... so I program the AIR convertor for 6key to spacekey.

Controller AIR convertor.rar

Posté(e) (modifié)
il y a 31 minutes, pullobestfriend a dit :

yea just found out if I use this i'll get error 3201 because the side device (the IR) for some reason will always be on on the input device test

I do not know tasoller ir output work ,openithm output is ". / ; ' [ ]"6keys or Are you blank ir in checking(デバイス初期化)?

Modifié par leo0317
Posté(e)
1 hour ago, leo0317 said:

I do not know tasoller ir output work ,openithm output is ". / ; ' [ ]"6keys or Are you blank ir in checking(デバイス初期化)?

it's the same. I was going to make AHK for it but since you posted it I'll gladly use that one then, thanks

Posté(e) (modifié)
24 minutes ago, chunithm PC said:

Finish

未命名.png

 

nice work !!

 

i've finally been successful in testing tasoller using https://github.com/caxerx/chuniio_tasoller_new

and can confirm it's fully working with air towers and LED's as well. (not tested on new+, as i cannot get that working yet, but i'm sure that it'll work the same.)

 

is the next hurdle getting network support? or has that been solved already?

Modifié par aulcfna
Posté(e)
3 hours ago, aulcfna said:

上記のように、そしてgithubリンクで

さびでコンパイルしなければならない人々を救うために、ここにdllとusbサーバーがあります https://drive.google.com/file/d/1I-axpySgGx4L_GUGRLgQGNZvnsxCpJNV/view?usp=sharing

ただし、個別の.iniファイルについては、そのリンクのガイドに従う必要があります。

219405335_2022-03-17064028.png.ac95f32565e6fc78c5a5570855845a51.png

1051100086_2022-03-17064755.png.1e2ffabb1555f0b91d74b4f929de9e2c.png

I used that .dll file and when I ran it I got this error and crashed on the aime100 screen.
Is there any way to resolve this?

Posté(e)
23 minutes ago, Re. said:

I used that .dll file and when I ran it I got this error and crashed on the aime100 screen.
Is there any way to resolve this?

it's possible that you may need to build the .dll yourself

these shouldn't have anything to do with network, so i can't say for sure, sorry

Posté(e)
30 minutes ago, aulcfna said:

.dllを自分でビルドする必要がある可能性があります

これらはネットワークとは何の関係もないはずなので、はっきりとは言えません、ごめんなさい

I understand.
Thank you very much.

Posté(e)
1 hour ago, AlucardTheGamer said:

Does anyone know how to enable free play on new plus?

I can't find any mention of it in the service menu, is it possible that it's migrated with event mode?

PL had an option for it in the game settings menu, however that's completely missing here

Posté(e)
2 hours ago, 友希那 said:

When you star, the screen is black

あなた多分日本人ですよね?

↑これを参考にしてください

これ見ても出来なかったら無理だと思ってください

というかSTARってCHUNITHM STARのことですよね?

ならこの場所で質問するのはおかしいです

CHUNITHMCrystalのトピックで質問してください

 

For those who are reading this topic
I apologize for suddenly speaking Japanese for so long.
He was using a translator and could not understand at all what I said in English, so I used Japanese and gave him a sermon.
I am truly sorry.

Posté(e)
1 hour ago, aulcfna said:

I can't find any mention of it in the service menu, is it possible that it's migrated with event mode?

PL had an option for it in the game settings menu, however that's completely missing here

set your config_common like this  

  "credit" :
    {
        "enable" : true,
        "max_credit" : 24,
        "config" :
        {
            "freeplay" : true,
            "game_cost" : [ 1, 1, 1, 2, 3, 4, 5, 6 ]

4 hours ago, aulcfna said:

it's possible that you may need to build the .dll yourself

these shouldn't have anything to do with network, so i can't say for sure, sorry

you may upload your whole file including in release.For me I only can't bulid x86 for no reason. It just has lots of errors

Posté(e)
4 minutes ago, wmsyr said:

For me I only can't bulid x86 for no reason. It just has lots of errors

try  

 rustup target add i686-pc-windows-msvc

to add target, then recompile

Posté(e)
48 minutes ago, 4321qasdfv said:

ネットワークの問題は修正されましたか?

ソリューションを共有していただけますか?

↓Please refer to this

On 2022/3/14 at 午前9時34分, whitegho said:

アクアサーバーでネットワークチェックに合格してもゲームでオフラインと表示される場合は、event00000012をチェックし、そのフォルダー内のxmlを設定し、「Alwaysopen」行をFalseからTrueに設定します。私の知る限り、それはあなたのダンプが新しいプラスであるときにのみ起こります。OriginalNewにはこの問題はありません

Enterキーでカードをスワイプできるように、DEVICEフォルダーにランダムな20個の数字が入力されたaime.txtがあることを確認してください。

 

Posté(e) (modifié)
4 minutes ago, Re. said:

Please refer to this

I never actually found event00000012 in A000 or A111, even the entire folder in the base NEW dump

NEW+ i haven't found it either, is there a difference here? would you possibly have the file path?

Modifié par aulcfna
Posté(e)
5 minutes ago, aulcfna said:

try  

 rustup target add i686-pc-windows-msvc

to add target, then recompile

new problem error: linker `link.exe` not found

however i did download vs2019 c++ pack. And got well in x64

Posté(e) (modifié)
6 minutes ago, wmsyr said:

new problem error: linker `link.exe` not found

however i did download vs2019 c++ pack. And got well in x64

alrighty. try this, ill run a fresh compile for good measure

https://drive.google.com/file/d/1guXJ_0YUvg_wPI5AxbmGFbwpWqM5syN-/view?usp=sharing - has been flagged by google TOS, presumably due to c++ make tools , unsure if this download will still work.

note you'll need to take only the chuniio_x86.dll from the i686 folder, and the exe / chuniio_x64.dll from the x86_64 folder.

 

Modifié par aulcfna
Posté(e)
4 minutes ago, aulcfna said:

I never actually found event00000012 in A000 or A111, even the entire folder in the base NEW dump

NEW+ i haven't found it either, is there a difference here? would you possibly have the file path?

On 3/14/2022 at 12:31 AM, chunithm PC said:

↑I downloaded CHUNITHM NEW PLUS from this post!
Maybe only this post contains event00000012
Sorry if this doesn't help you.

Posté(e)
2 minutes ago, Re. said:

↑I downloaded CHUNITHM NEW PLUS from this post!
Maybe only this post contains event00000012
Sorry if this doesn't help you.

any guidance is help, friend

i'll give this dump another shot, i wasn't able to get it working previously. if i run into any issues ill report back here 🙂

Posté(e)
4 minutes ago, aulcfna said:

alrighty. try this, ill run a fresh compile for good measure

https://drive.google.com/file/d/1guXJ_0YUvg_wPI5AxbmGFbwpWqM5syN-/view?usp=sharing - has been flagged by google TOS, presumably due to c++ make tools , unsure if this download will still work.

note you'll need to take only the chuniio_x86.dll from the i686 folder, and the exe / chuniio_x64.dll from the x86_64 folder.

 

nope it is dead

Posté(e)
1 minute ago, wmsyr said:

Chunithm IO: Failed to load IO DLL: 800700c1: chuniio_x86.dll

no luck. x86 is unreachable

i had the same issue at first, but you need to pull specifically just the x86 dll from the x86 release folder, and specifcally just the x64 dll and usb server exe from the x64 release folder 

 

if this wont work, ill try pulling from my chuni folder that i know is working.

Créer un compte ou se connecter pour commenter

Vous devez être membre afin de pouvoir déposer un commentaire

Créer un compte

Créez un compte sur notre communauté. C’est facile !

Créer un nouveau compte

Se connecter

Vous avez déjà un compte ? Connectez-vous ici.

Connectez-vous maintenant
×
×
  • Créer...