[Arcade PC] Chunithm NEW / + / Int. / Sun / ... (S3G@ ALLS)

[Mayumi_Garage]

I installed aquadx-1-dev but I don't know how to do it.

 

 

How should I write the dns etc. in segatools.ini in this case?

The version I'm using is luminous 2.22.

[kuu124]

brokenithm When I play difficult songs on Android, the sliders sometimes don't respond. Simultaneous pressings can also result in misses. Is there a way to fix this? I'm connected via TCP.

 

Solved.
Now it works perfectly in an unexpected way.

Modifié le 23 août par kuu124

[PrinnyTonic]

Setting up Luminous currently.

 

I have followed all the steps in the guide and changed the settings in the test menu. But I am still stuck at the "Checking Distribution Server" message. Any ideas?

(I set グループ内基準機設定 to 基準機 ).

For "Distribution Server Setting" it says "Client". Not sure if that is correct or if I can change it somehow.

Modifié le 22 août par PrinnyTonic

[MAMA1397]

How can I set up 32 keys?
Currently, only 8 keys are set: S.D.F.G.H.J.K.L.
Also, is it possible to change the key switch of the AIR?
Currently: Space only

Also, please tell me how to connect genuine air strings.

[parksh104]

On 8/14/2024 at 1:49 PM, Bentoowo said:

options that were not included: A170.7z ~ pixeldrain A171.7z ~ pixeldrain A172.7z ~ pixeldrain A181.7z ~ pixeldrain ALM1.7z ~ pixeldrain

Thank you for sharing option files. But, just copy & paste in my Luminous option folder directory(CHUNITHM LUMINOUS 2.22\bin\option) it doesn't work. How can I solve this problem? 

[yangie1]

On 8/2/2024 at 1:39 PM, taptaptap2023 said:

 

Sent you a message with invite to two groups. Not sure why people giving you so much shade for asking. Not the flex they think it is. 

may i have an invite as well?

[MAMA1397]

Does anyone have any data on LUMINOUS PLUS or YOASOBI's "yuusya"?

Modifié le 27 août par MAMA1397

[pullobestfriend]

8 hours ago, MAMA1397 said:

Does anyone have any data on LUMINOUS PLUS or YOASOBI's "yuusya"?

I don't remember where I got this from but I think it's in here

 

 

On 8/2/2024 at 12:39 PM, taptaptap2023 said:

 

Sent you a message with invite to two groups. Not sure why people giving you so much shade for asking. Not the flex they think it is. 

Can I have an invite too?

 

A119.7z

[MAMA1397]

19 hours ago, pullobestfriend said:

どこで手に入れたのかは覚えていないが、ここにあると思う

 

 

私も招待してもらえますか？

 

A119.7z 7.62MB · 9 ダウンロード

Thanks!!

[KharrlozGM]

3 hours ago, MAMA1397 said:

Thanks!!

were you able to get this to work? the song appears locked to me :,( unlocker did not help

[MAMA1397]

17 hours ago, KharrlozGM said:

これを機能させることができましたか？曲がロックされているように見えます:,(ロック解除ツールは役に立ちませんでした

It seems that only MASTER can play.
Please use your ticket.

[MAMA1397]

Does anyone have the option file for COOL&CREATE's "Matsuyoi Night Bug"?

[Tenajin]

I'm having an issue with my Chunithm Luminous installation where the initializer (start.bat) keeps crashing after I reach this screen (which occurs after the list of "Good" statuses you'd typically get if everything went well):

 

For additional context, I've installed Chunithm Sun Plus successfully before with my Tasoller and Artemis server. So I'm used to seeing this part of the initializer after the "Good" checklist when running Sun Plus:

 

I figured downloading someone else's presets they included in this thread, changing the segatools.ini settings where appropriate, double checking the changes against the Luminous installation tutorial, and performing the other steps the tutorial states would work out. But that evidently isn't the case since the Luminous start.bat crashes midway through. The cmd window that remains after it crashes doesn't tell me much, either:

 

At this point, I'm at a loss as to what the solution is. Would someone be able to help me with this? An invite to the Discord server would be great too if it's easier to communicate the solution that way (if the server is different from the one listed above, that is, which I've already joined). I'm happy to provide any additional information that is needed for this to work.

 

Edit #1: The game now functionally works for me with my Tasoller after a fresh re-install. But now I'm experiencing an issue where I have no audio (sound system works fine outside of the game). Any help with this would be greatly appreciated, too.

 

Edit #2: Audio issue was fixed by checking "Force shared audio mode, system audio sample rate must be 48000Hz" in the Chusan patcher.

 

Modifié le 2 septembre par Tenajin

[Holly]

I have a complete collection of Chunitm Thank to this useful site but,while all chapters from NEW,NEW PLUS to Latest LUMINUS chapters work perfcetly setting them,i have Only stuck problem,also if i use aquatool ,with some previous chapters that all stuck at the screen precious A check..i set on A TEST SECTION but them continue to stuck i repeat at the screen previous A check...where i wrong?

Modifié le 6 septembre par Holly

[Holly]

23 ore fa, Holly ha scritto:

 

 

 

Modifié le 7 septembre par Holly

[regacy]

Hi, I've recently picked up Chunithm again (last time I played it was on Paradise and, yeah, I remember it was tough to properly set up).

After some searches, I've set up Luminous (using two-torial) and almost everything seems to work, except that I can't use AIME for some reason (nothing happens if I press ENTER for several seconds, which makes me have to play as a guest).

Is it something that is normal (maybe because Luminous is recent?) or is there a fix?

 

All I can say is that when I launch start.bat, I can see AquaDX' docker receiving some request and answering back to the game.

From the game, the checks are good, except the Title server which shows as BAD.

[ruisu39]

I've installed Luminous and I have a problem. My moniter is 100hz, not 120hz. Can i force the game to be SP(120hz) but still use my 100hz? 60hz feels too slow for me ):

[Thislsawa]

use virtual display(?)

[zuinal]

Anyone know how to setup chunihands alongside brokenithm? Is it just put chunihands file inside bin folder?

[Thislsawa]

On 9/12/2024 at 11:58 PM, ruisu39 said:

I've installed Luminous and I have a problem. My moniter is 100hz, not 120hz. Can i force the game to be SP(120hz) but still use my 100hz? 60hz feels too slow for me 😞

Or patch chusanApp.exe w/“ Force 120hz check?

On 9/11/2024 at 7:23 AM, regacy said:

Hi, I've recently picked up Chunithm again (last time I played it was on Paradise and, yeah, I remember it was tough to properly set up).

After some searches, I've set up Luminous (using two-torial) and almost everything seems to work, except that I can't use AIME for some reason (nothing happens if I press ENTER for several seconds, which makes me have to play as a guest).

Is it something that is normal (maybe because Luminous is recent?) or is there a fix?

 

All I can say is that when I launch start.bat, I can see AquaDX' docker receiving some request and answering back to the game.

From the game, the checks are good, except the Title server which shows as BAD.

Did you create aime.txt and fill with aime No. in /bin/DEVICE ?

[SpookyB01]

Can someone help me regarding how to power AquaDX for Chunithm Luminous 2.22? I read the instructions, but am not sure how to run "docker compose up" in the AquaDX folder. Do I use git? CMD? Docker?

Due to this, the all.net authorization always says "BAD" and I can not use an Aime

Modifié le 23 septembre par SpookyB01

[MAMA1397]

1. Install Docker Desktop.

2. Right-click the AquaDX folder

3 Open from the terminal. Enter docker compose up.

 

Note

・”\AquaDX\config\application.properties"

・Remove the #.

allnet.server.host=your IP address (192.168.x.x)

allnet.server.port=80

 

If you don't know what you're doing, don't do it.

[SpookyB01]

On 9/24/2024 at 12:44 AM, MAMA1397 said:

1. Install Docker Desktop.

2. Right-click the AquaDX folder

3 Open from the terminal. Enter docker compose up.

 

Note

・”\AquaDX\config\application.properties"

・Remove the #.

allnet.server.host=your IP address (192.168.x.x)

allnet.server.port=80

 

If you don't know what you're doing, don't do it.

Sorry for the confusion, I had forgotten to update that I was able to enter the docker compose up command as turns out I mistyped. However, the real problem is it says "app-1 exited with code 1", and this problem I have been unable to fix. I would really appreciate some help over this problem, thank you.

 

Modifié le 26 septembre par SpookyB01

[SpookyB01]

Can somebody please DM me how to fix AquaDX and connect to All.net? When I do docker compose up, this problem pops up.

 

[regacy]

Le 22/09/2024 à 13:51, Thislsawa a dit :

Did you create aime.txt and fill with aime No. in /bin/DEVICE ?

Yeah, the file was already created and contained a 20 digits number (no space before/after).

 

Le 23/09/2024 à 17:44, MAMA1397 a dit :

1. Install Docker Desktop.

2. Right-click the AquaDX folder

3 Open from the terminal. Enter docker compose up.

 

Note

・”\AquaDX\config\application.properties"

・Remove the #.

allnet.server.host=your IP address (192.168.x.x)

allnet.server.port=80

 

If you don't know what you're doing, don't do it.

 

This was the fix for me.

I noticed (on one of the cmd prompt opened when you launch the start file) that there were retries for the authentication (between segatools and aqua).

Thank you, MAMA!

Modifié le 30 septembre par regacy

[themlgpro]

Has anyone gotten it to work on the latest Artemis Master?
My Luminous is still not connected to the AllNet, and I'm not sure why...

When I run the game into Artemis, it shows that the machine is unregistered, as well as the billing:


I feel like I've done everything, from reinstalling and reconfiguring Artemis Master, setting ownership in dbutils, checking IP-addresses in Core config and segatools,
and such.
The database is connected, but I'm not able to see where I can register the serial into the database...
In the end, I can't save any progress on Chunithm, which makes me very sad   :(((
 

[Scribbler]

13 hours ago, themlgpro said:

Has anyone gotten it to work on the latest Artemis Master?
My Luminous is still not connected to the AllNet, and I'm not sure why...

When I run the game into Artemis, it shows that the machine is unregistered, as well as the billing:


I feel like I've done everything, from reinstalling and reconfiguring Artemis Master, setting ownership in dbutils, checking IP-addresses in Core config and segatools,
and such.
The database is connected, but I'm not able to see where I can register the serial into the database...
In the end, I can't save any progress on Chunithm, which makes me very sad   :(((
 

Your screenshot shows SDDT connecting to artemis. SDDT is ongeki, not chunithm ...

[Sakurako]

Is there a file like SDVX clone with just the charts and songs?

[basedcaff]

hello, it's my first time trying to setup chuni on my pc, used the uploaded luminous 2.20 data in this forum and have almost everything set up. i'm trying to run the game with AquaDX but there seems to be an error in the all.net authentication. after getting past the network test it just crashes and all processes are terminated. not quite sure what i'm getting wrong as i have followed every step. any help would be appreciated. here's a link to a video showing the crash.

edit: it's working!

i redid everything, but moved all of the files i'm working on in a different file path. it seems it wouldn't work when you put it in folders that require admin access. now i just need to configure the controllers...

Modifié le 22 octobre par basedcaff

[ComfyNeko]

On 8/2/2024 at 1:39 AM, taptaptap2023 said:

 

Sent you a message with invite to two groups. Not sure why people giving you so much shade for asking. Not the flex they think it is. 

Can I have an inv to the discord group ?

 

[person4269]

On 8/2/2024 at 1:39 AM, taptaptap2023 said:

 

Sent you a message with invite to two groups. Not sure why people giving you so much shade for asking. Not the flex they think it is. 

I'd also appreciate an invite.

[MAMA1397]

It's sad that we haven't had much interaction lately.
By the way, is there no data for LUMINOUS PLUS yet?

[monamina]

can anyone upload japanese data/db and data/surfboard of luminous for me?

i downloaded the luminous, but it shows in english.

[Nelg44]

I have brokenithm-evolved working. What’s the process in getting slidershim to work?. I can connect to it fine but in game it’s not working. Evolved runs and performs fine but I’d rather see the key and air outlines. I’m using an android tablet, I haven’t been able find a setup guide. 

[Paarunow]

On 2024/11/2 at 午後10時54分, MAMA1397 said:

最近交流があまりなくて残念です。
ところで、LUMINOUS PLUSのデータはまだないのでしょうか？

its dumped