Aller au contenu

[Arcade PC] Chunithm NEW / + / Int. / Sun / ... (S3G@ ALLS)


Messages recommandés

Posté(e) (modifié)
40 minutes ago, Assassin said:

How should this problem be solve

minime:minime-lite

segatool:segatools_chusan

game version:Chunithm NEW Plus

屏幕截图(8).png

Are you trying to run start.bat in the bin folder?

If so then it is because you missing some file (.exe file like chusanapp)

Modifié par 1nterland
Posté(e)
10 hours ago, 1nterland said:

Are you trying to run start.bat in the bin folder?

If so then it is because you missing some file (.exe file like chusanapp)

I run it but this problem persists

And I try to replace the chusanapp,but this problem still occur

Can you help me check which files are missing or misinstalled?

Thanks

屏幕截图(10).png

屏幕截图(9).png

Posté(e)
4 hours ago, Assassin said:

I run it but this problem persists

And I try to replace the chusanapp,but this problem still occur

Can you help me check which files are missing or misinstalled?

Thanks

屏幕截图(10).png

屏幕截图(9).png

Have you tried patching the game?

Posté(e)
On 4/4/2022 at 1:13 AM, TotallyAnonymousHumanoid said:

Thank you for your detailed reply. I wasn't able to figure out how to get the folders out of the VHD files, but managed to find all those folders within the old CHUNITHM NEW.rar shared below:

However unless I'm blind (our folder structure matches) I don't really see anything new. All looks like back when I only had A141, A201, A202.

 

because those song are already in chunithm new+ a000 folder so you dont need to have them

Posté(e) (modifié)
6 minutes ago, ShinonomeEnana said:

Hello,I using this,too.

But I can t enter the game test mode.

Did you had the same problem as mine?

Do you press f1 or set the test button the same as the instruction?

Modifié par 1nterland
Posté(e)
6 minutes ago, ShinonomeEnana said:

Yes.

And I set the segatools like this.

2111170453_QQ20220810103454.png.c2cce902b5b731d630f81bedbe867ad3.png

Thats strange, the one on segatools seemingly look like mine(except newio86 newio64 since i use slidershim)

8 minutes ago, ShinonomeEnana said:

Yes.

And I set the segatools like this.

2111170453_QQ20220810103454.png.c2cce902b5b731d630f81bedbe867ad3.png

Maybe because you disable slider(since i set it to 32 key tasoller and it work fine)

Posté(e)
19 minutes ago, 1nterland said:

Thats strange, the one on segatools seemingly look like mine(except newio86 newio64 since i use slidershim)

Maybe because you disable slider(since i set it to 32 key tasoller and it work fine)

I tried to set it to 1 like

[slider]
enable=1

But I still can't enter the test mode,and my tasoller can't work,too.

I set the same segatools like new plus when I play Paradist Lost,and everything is fine.

Now I think maybe newio86 and newio64 is the reason,I'm trying to cheak it now.

Thanks for your suggestion.

Posté(e) (modifié)

i noticed that there is still a lagre chunk of song that not in current version like this one maybe they havent been uploaded yet

 

Modifié par 1nterland
Posté(e)
Il y a 5 heures, 1nterland a dit :

Is this possiple to play online with each other like what chunithm cabinet usually do 

Unless there is a private server (like bemani games)

 

Il y a 10 heures, 1nterland a dit :

i noticed that there is still a lagre chunk of song that not in current version like this one maybe they havent been uploaded yet

 

 

Not sure if there is a better way to do it, for me I use VSCode and search all occurrences of <firstLock>true</firstLock> in chunithm directory then replace all with <firstLock>false</firstLock>, all song unlock afterwards

Posté(e) (modifié)
On 7/23/2022 at 2:51 PM, monamina said:

I found the way to solve the issue that crashes at Aime 100 or Aime 0 and the error says unitIndex is out of range.

 

first, open the error log located in appdata (this folder is created by segatools) then check the [File].

you will see the value of File in the error like:

"D:\Jenkins\workspace\amdaemon_all_build\libs\amdaemon\src\Aime.cpp".

 

second, insert your usb memory or mount a virtual disk and the drive must be the same as the File drive you just checked. so in this case the drive must be booted as "D".

 

third, copy amfs, appdata folders to usb drive, and set these path in segatools.ini.

 

forth, open config_sp.json and set "enable" in "aime" to true (if the value if false. this value is true as default).

 

run start.bat.

 

Edit:

virtual disk also works, and you don't have to copy option folder.

A friend of mine tried using it and it still doesnt work

14 minutes ago, kxt2017 said:

Unless there is a private server (like bemani games)

Wait so aqua only emulate the aime one not the online function like playing with each other?

Modifié par 1nterland
Posté(e)
il y a 14 minutes, 1nterland a dit :

A friend of mine tried using it and it still doesnt work

Wait so aqua only emulate the aime one not the online function like playing with each other?

Aqua is a local server that runs in your computer, it does not have actual online functionality afaik

 

in case you don't know, when the server is running you can access the server website via http://localhost/web/

Posté(e) (modifié)
8 hours ago, Yoimiya said:

This error occurred even though I fixed and updated the runtime with DirectX Fix software.

QQ图片20220818174607.png

Maybe because of chusanhook?

Modifié par 1nterland
Posté(e)

Phenomenon: Windows Device Manager
I can't get rid of the warning at "I SAY NYA-O"

 

Purchase TASOLLER and DAO original TASOLLER_HOST_MCU_V2.01
TASOLER_LED_MCU_V2.0.bin
installed the
(Touch Firmware is not installed)


I tried playing CHUNITHM, but it doesn't react well (Slide judgment sometimes breaks off)

to see if it improves
I installed custom firmware.


Even if I install the driver with zadig-2.7
Windows device manager
The warning at "I SAY NYA-O" does not disappear → (TASOLLER cannot be used with CHUNITHM)

my environment is
CPU RYZEN5900X
M/B ASUS ROG Strix X570-E Gaming
will be

As mentioned in previous threads and custom firmware manuals
I tried adding a USB card from PCI-EXPRESS, but the situation did not change

This card has a Renesas D720202
It seems that a controller called

If you have a similar environment and solved the problem by adding a PCI card, what kind of controller is installed?

Or is there a solution other than adding a USB card to PCI?

Posté(e)
2 hours ago, AlucardTheGamer said:

Is there a unlocker for chuni new plus? I am currently using chunithm pcs folder and there is only 1 partner unlocked 😧

You can use paradise's chunithm unlocker

Posté(e)
4 hours ago, MASHIHRO said:

Phenomenon: Windows Device Manager
I can't get rid of the warning at "I SAY NYA-O"

 

Purchase TASOLLER and DAO original TASOLLER_HOST_MCU_V2.01
TASOLER_LED_MCU_V2.0.bin
installed the
(Touch Firmware is not installed)


I tried playing CHUNITHM, but it doesn't react well (Slide judgment sometimes breaks off)

to see if it improves
I installed custom firmware.


Even if I install the driver with zadig-2.7
Windows device manager
The warning at "I SAY NYA-O" does not disappear → (TASOLLER cannot be used with CHUNITHM)

my environment is
CPU RYZEN5900X
M/B ASUS ROG Strix X570-E Gaming
will be

As mentioned in previous threads and custom firmware manuals
I tried adding a USB card from PCI-EXPRESS, but the situation did not change

This card has a Renesas D720202
It seems that a controller called

If you have a similar environment and solved the problem by adding a PCI card, what kind of controller is installed?

Or is there a solution other than adding a USB card to PCI?

yea, that host fw doesn't work with AMD CPU's, use this one instead, installs the same way
TASOLLER_HOST_customize_FW_AMD_20210920.bin

Posté(e)

Hey guys I wonder if I can seek some assistance here uwu...

I just downloaded SDBT_2.0.5.0 from the link on the top thread.... Any chance some kind fellows give instructions to run this one?

Posté(e)

 

Thank you Vmundo

With CHUNITHM he now has a custom firmware TASOLLER.

However, when playing the game, the screen blacks out at an unspecified time and he gets error code 6401.


I'm trying to replace the contents of the bin folder with a file that can be downloaded from this thread, but it doesn't work

Also, I do not understand how to write segatools.ini when I want to use TASOLLER's CFW

[newio86]
path=chuniio_tasoller.dll
;path=chusnio_x86.dll

[newio64]
;path=chusnio_x64.dll
path=chuniio_tasoller_x64.dll

[aime]
aimPath=DEVICE\aime.txt

[chuniio]
path=chuniio_tasoller.dll
;; For Chunithm NEW (segatools_64.ini)
path=chuniio_tasoller_x64.dll

;; Uncomment for Chunithm NEW
chusan=1

This is the segatools.ini I'm using, and Tasoller is running in the game for the time being, but is it correct?

 

Posté(e)

image.png.1603e45ddaf46308b68ccf055e01c2e2.png

I have updated to tasoller 2.0 (WinUSB) and tried sticking it in all the ports, but the yellow marks are not disappearing. Please let me know if there is a way to deal with this.

Posté(e)
3 hours ago, Shk said:

image.png.1603e45ddaf46308b68ccf055e01c2e2.png

I have updated to tasoller 2.0 (WinUSB) and tried sticking it in all the ports, but the yellow marks are not disappearing. Please let me know if there is a way to deal with this.

Is your PC's CPU an AMD?

In that case
Contributed by Vmundo
"TASOLLER_HOST_customize_FW_AMD_20210920.bin"
It may be improved by using the firmware of

Posté(e)
13 hours ago, MASHIHRO said:

Is your PC's CPU an AMD?

In that case
Contributed by Vmundo
"TASOLLER_HOST_customize_FW_AMD_20210920.bin"
It may be improved by using the firmware of

I would like to know how to use this file.

Posté(e)
2 hours ago, Shk said:

I would like to know how to use this file.

Your TASOLLER has applied custom firmware, so the device name should have changed to "I SAY NYA-O".

TASOLLER HOST firmware TASOLLER_HOST_customize_FW_AMD_20210920.bin
just to

if you don't even know
Please check the procedure by translating the document "手台設定.rar" uploaded by chunithm PC on Posted March 26.

Posté(e) (modifié)

I'm having trouble with the error 6401 - what am I missing?

I set my display settings to 1920x1080, refresh rate to 60hz and enabled fps120, cvtmode and windowed in segatools.ini, and disabled framed.

I also patched the chusanApp.exe to CVT.

I run Aqua, then run chusanApp.exe and start the chuni start.bat in administrator mode.

The first time it crashes with:

 

--- Begin chusan_pre_startup ---
Pinned shader compiler, hMod=7B370000
Pinned debug helper library, hMod=6A470000
USB I/O: Starting IO backend
---  End  chusan_pre_startup ---
Clock: Returning JST timezone


The second time I start it, I get the 6401 error.


I tried to use another monitor with 120hz and without CVT but get the same error.


inject64.exe is also spamming "USB I/O: Unknown command 41"




EDIT: Looks like I was getting this error because I was using the tutorial with the tassoler, but don't have a tasoller yet (on the way though) - I was trying to see if it works.

Used a clean install without any of the tasoller releated files and without any key mapping, and got it to work.

Hopefully I can get it to work again once the tasoller is here 😅

Modifié par senju
Posté(e)
On 8/24/2022 at 3:31 AM, MASHIHRO said:

 

Thank you Vmundo

With CHUNITHM he now has a custom firmware TASOLLER.

However, when playing the game, the screen blacks out at an unspecified time and he gets error code 6401.


I'm trying to replace the contents of the bin folder with a file that can be downloaded from this thread, but it doesn't work

Also, I do not understand how to write segatools.ini when I want to use TASOLLER's CFW

[newio86]
path=chuniio_tasoller.dll
;path=chusnio_x86.dll

[newio64]
;path=chusnio_x64.dll
path=chuniio_tasoller_x64.dll

[aime]
aimPath=DEVICE\aime.txt

[chuniio]
path=chuniio_tasoller.dll
;; For Chunithm NEW (segatools_64.ini)
path=chuniio_tasoller_x64.dll

;; Uncomment for Chunithm NEW
chusan=1

This is the segatools.ini I'm using, and Tasoller is running in the game for the time being, but is it correct?

 

If you downloaded chunithm from the guide on page 17, theres a folder called "手台設定", the folder inside that called "chusanio" has the files you can just copy and paste into bin. 

in my segatools.ini, I just have this, not [chuniio]:
 

[newio86]
path=chusnio_x86.dll

[newio64]
path=chusnio_x64.dll


 

Posté(e)

Hello, 

 

I've installed and got everything working but suddenly the game started to skip MODE SELECT and also after playing the 3 songs it doesn't allow me to acces my USER BOX to change my plate and stuff. I've searched all along this thread but saw no one with the same problem please help.

Posté(e)
5 hours ago, Zhoul155 said:

Hello, 

 

I've installed and got everything working but suddenly the game started to skip MODE SELECT and also after playing the 3 songs it doesn't allow me to acces my USER BOX to change my plate and stuff. I've searched all along this thread but saw no one with the same problem please help.

I feel that it is a specification in CHUNITHM NewPlus

if you want to change them
I think you can change it by accessing the AQUQ website

 

http://localhost/web/dashboard

 

When asked for card number
Please enter the number set in aime.txt

Veuillez vous connecter pour commenter

Vous pourrez laisser un commentaire après vous êtes connecté.



Connectez-vous maintenant
×
×
  • Créer...