Aller au contenu

[Arcade PC] Chunithm NEW / + / Int. / Sun / ... (S3G@ ALLS)


chusanApp

Messages recommandés

Hello, I have been playing chunithm without any error but recently I got errors on boot up.

Here is log from cmd.exe

Quote

--- Begin chusan_pre_startup ---
Pinned shader compiler, hMod=7BFD0000
Pinned debug helper library, hMod=69100000
DVD: hook enabled.

Game processes have terminated

and here is log from inject_64.exe

Quote

--- Begin chusan_pre_startup ---
Pinned shader compiler, hMod=00007FFD69FA0000
Pinned debug helper library, hMod=00007FFDF4440000
DVD: hook enabled.
Chunithm IO: Using custom IO DLL: chusnio_x64.dll
Custom IO DLL does not expose chuni_io_get_api_version, assuming API version 1.0.
Please ask the developer to update their DLL.
USB I/O: Starting IO backend
---  End  chusan_pre_startup ---
amdaemonExe Ver.026fb4a0 Build:Aug 27 2021 19:45:52

Process state: setup Game Mode
Security: Opened handle
Pcbid: Get PCB serial
Security: nusec_ioctl_get_nvram_geometry
Security: nusec_ioctl_get_nearfull
Hwmon: Opened device
AmVideo: amDllVideoOpen
AmVideo: amDllVideoSetResolution
AmVideo: amDllVideoClose
Netenv: GetAdaptersInfo: Virtualized LAN configuration:
Netenv: Interface IP :   127.  0.  0. 11
Netenv: Router IP    :   127.  0.  0.254
Netenv: MAC Address  : 01:02:03:04:05:06
Netenv: GetAdaptersInfo: Virtualized LAN configuration:
Netenv: Interface IP :   127.  0.  0. 11
Netenv: Router IP    :   127.  0.  0.254
Netenv: MAC Address  : 01:02:03:04:05:06
Netenv: GetAdaptersInfo: Virtualized LAN configuration:
Netenv: Interface IP :   127.  0.  0. 11
Netenv: Router IP    :   127.  0.  0.254
Netenv: MAC Address  : 01:02:03:04:05:06
SetupAPI: Interface {4d1e55b2-...} -> Device node $io4\vid_0ca3
USB I/O: Device opened
USB I/O: Get manufacturer string
USB I/O: Get product string
Netenv: GetBestRoute ip4 0 -> ip4 0
Clock: Returning JST timezone
USB I/O: Clear board status
Error 0
USB I/O: Set comm timeout
USB I/O: Set sampling count
NFC Assembly: Starting backend DLL
NFC 00: Unimpl command 61
USB I/O: GPIO Out
Process state: Advertise
NFC 00: Reset
Netenv: GetBestRoute ip4 0 -> ip4 7f00000b
Netenv: GetBestRoute ip4 0 -> ip4 7f00000b
start LAN install - server.
Netenv: Virtualized ICMP Ping to ip4 7f0000fe
Netenv: Virtualized ICMP Ping to ip4 7f0000fe
Netenv: Virtualized ICMP Ping to ip4 7f0000fe
Netenv: Virtualized ICMP Ping to ip4 a0000bd
Netenv: Virtualized ICMP Ping to ip4 a0000bd
Netenv: Virtualized ICMP Ping to ip4 a0000bd
Clock: Blocked timezone update
Clock: Blocked system time update
Clock: Blocked system time update
NFC 00: Reset
RGB LED 08: Reset
RGB LED 08: Get info

I didn't specifically change my settings ever, so I have no idea where this error comes from. I am using CFW and chusnio from the google drive, and using aqua 0.0.36. Also using Win10 with intel 9th processor. Any help will be appreciated.

 

EDIT: Fixed. Never check "stop fullscreen optimization" for chusanapp.exe

Modifié par Lavide
Lien vers le commentaire
Partager sur d’autres sites

Is there any benefit of using 'chuniio_tasoller.dll' and 'chuniio_tasoller_x64' from  https://dev.s-ul.net/akiroz/chuniio-tasoller/-/releases? I have been using 'chusnio_x86.dll' and 'chusnio_x64.dll' with no issues from my tasoller? Wondering if there are also any other small file changes that make the game better or any new updates.

Lien vers le commentaire
Partager sur d’autres sites

hace 2 horas, cantsinglie dijo:

So I managed to get the game running but there is no audio output.  Like there is an option to adjust the volume in the volume mixer.

Chunithm only the audio works with AUX or integrated speakers (doesn't work with HDMI Audio or Bluetooth Audio)

Lien vers le commentaire
Partager sur d’autres sites

On 11/9/2022 at 12:17 PM, A7785371 said:

Wanted to update the fresh setup guide to be a bit more complete. Thank you to @mmm7 for the original guide which was used as reference as well as all the lovely folk who added these details here and there.  

 

Controller specifics :
If you're using a keyboard based controller, TASOLLER with OFW, brokenithm-kb, or slidershim follow steps marked A.
If you're using a TASOLLER with CFW (firmware files included in the base game package) follow steps marked B, these include installing the CFW. If you ever want to revert to OFW you can at anytime via the normal USB, UART flashing is just for touch firmware. If you bought a TASOLLER past May 28, 2021 it will have the latest touch firmware.
If you're using Brokenithm-Evolved on an Android device via the .APK follow steps marked C.


Part I - Downloads and requirements  
1. Download the base package for Chunithm NEW PLUS here.
2. Update Java to v11 or later for Aqua.
3. Download the latest Aqua from this thread, or compile it from source.
4. Download the latest ICF1 and ICF2 from page 1, ICFs for version 2.05.00 are attached to this post.
5. Download segatools-chusan.7z from page 1.
    A1. Download the keyboard air input converter here.

    B1. Download the latest version of chuniio_tasoller.dll and chuniio_tasoller_x64.dll here.
    B2. If you are using an AMD CPU download the revised USB host firmware here.

    C1. Download brokenew.7z from the releases.

 

The following steps are optional and are not required to get the game to run :
6. Download Chunithm_NEW_English_Patch_v2.zip (or whichever the latest version is) on page 1 if you want to have much of the interface translated to English
7. Download additional option files for more songs and content. One set of them are listed as "Option: here" on page 1. You can download the A114 omni pack here, note this omni pack does have audio adjustments which does affect sound quality, you can simply remove the A114 option folder if you want to remove those songs due to the quality. Removed songs from Chunithm NEW to Chunithm NEW PLUS are here with an addendum here. If you want to have Hololive characters and maps there is a custom created mod here, no additional music is present in this option.

8. If you find the bass on the songs in NEW PLUS to be too aggressive you can download a new audio config here. Though I have not tested it myself so be sure to backup the original file before replacing it.


Part II - Configuration and installation
1. Extract all archives .7z, .rar, etc. Note the game will only work if it is on drive letter C:\
2. Move ICF1 and ICF2 to the \chunithm new plus\amfs\ folder, overwriting existing files.
3. Move the inject_x64.exe and inject_x86.exe from \segatools-chusan\ to the \chunithm new plus\app\bin\ folder, overwriting existing files.

4. Move the chusanhook_x86.dll, and chusanhook_x64.dll from the \chunithm new plus\手台設定\chusanio\ folder to the \chunithm new plus\app\bin\ folder, overwriting existing files.
    B1. Move the chuniio_tasoller.dll and chuniio_tasoller_x64.dll to the \chunithm new plus\app\bin\ folder. 
    C1. Move the chusanhook_x86.dll, and chusanhook_x64.dll from \brokenew\ to the \chunithm new plus\app\bin\ folder, overwriting existing files.
5. Move any downloaded A### option folders to the \chunithm new plus\option\ folder.
6. If you downloaded the English patch move the data and option folders from \Chunithm_NEW_English_Patch_v2\Translation\ to \chunithm new plus\app\data and \chunithm new plus\option respectively. Merging with existing folders, overwriting existing files
7. If you downloaded the chu.acf audio change move it to \chunithm new plus\app\data\sound\ folder, backup original if you wish to revert this quickly otherwise just overwrite it.
8. If you wish to move an updated Aqua to \chunithm new plus\ similar to the existing aqua-0.0.31-RELEASE folder you can, Aqua can go anywhere on your system. 
9. Open NEW plus.html in \chunithm new plus\ChunithmNEW plus tools\. Drag \chunithm new plus\app\bin\chusanApp.exe onto the file prompt click to open the dialog. Select all options except for "Force 2 channel audio output". Select "Save Patched File" which will download a new chusanApp.exe, move it to \chunithm new plus\app\bin\ and overwrite.
10. Open \chunithm new plus\app\bin\DEVICE\aime.txt and enter any 20 numbers no spaces before during or after and save. This is your AIME card number which will be sent when signing in just like tapping a card.
11. Open application.properties in your Aqua folder. Set allnet.server.host= to your local ip address and save. You can obtain your local ip via ipconfig in cmd or via your network connection details control panel.
12. Open \chunithm new plus\app\bin\DEVICE\segatools.ini. Set the [vfs] keys amfs=, option=, and appdata= to their absolute path on your disk (i.e amfs=C:\Users\Admin\Downloads\chunithm new plus\amfs). Do not follow the comment for the appdata key, it must be set to the absolute path for the \chunithm new plus\appdate folder, not a new empty folder.
13. Set the [dns] key default= to your local ip address, this should be the same address used for Aqua in step 10. 
14. Set the [gfx] keys per your use case. Due to the strict resolution needed for fullscreen, windowed=1 is recommended, setting framed=1 will cause a normal window heading to allow you to drag it if your resolution is greater than 1080p. 
15. Set the [io3] keys to new keycodes to prevent conflicts, recommend test=0x70, service=0x71, and coin=0x72 for F1-F3. List of keycodes here if you want to change them to something else.
16. Set [fps120] enable=1 and [cvtmode] enable=1.
    A1. Delete or comment out the [newio86] and [newio64] keys.
    A2. Copy these keycodes for TASOLLER KB and slidershim set to TASOLLER layout, or these keycodes for brokenithm-kb. Append the new keys to the bottom of the file.
    B2. Replace the [newio86] and [newio64] keys and append the [chuniio] key as below.

[newio86] 
path=chuniio_tasoller.dll

[newio64] 
path=chuniio_tasoller_x64.dll

[chuniio] 
path=chuniio_tasoller.dll
path=chuniio_tasoller_x64.dll
chusan=1


    C1. Set [newio86] path=chusanhook_x86.dll and [newio64] path=chusanhook_x64.dll.
16. Save segatools.ini.

 

B3. Unplug the data connector for the TASOLLER (ensure that it is connected directly to the motherboard USBs). Open \chunithm new plus\手台設定\Firmware\Update V1.1.exe. Hold down the left FN2 button and plug in data while holding it down, let go when the new device appears in Windows.
B4. Click connect in Update V1.1.exe and open the 手台設定\Firmware\Host_V2.bin on Intel CPUs or the "TASOLLER_HOST_customize_FW_AMD_20210920.bin" downloaded earlier on AMD CPUs. Click update. Once it is done click disconnect and close Update V1.1.exe.
B5. Unplug the data connector for the TASOLLER. Open \chunithm new plus\手台設定\Firmware\Update V1.1.exe. Hold down the right FN1 button and plug in data while holding it down, let go when the new device appears in Windows.
B6. Click connect in Update V1.1.exe and open the 手台設定\Firmware\LED_V2.bin. Click update. Once it is done click disconnect and close Update V1.1.exe.
B7. Unplug and reconnect the data connector for the TASOLLER, it should display a reactive rainbow on the ground slider and no longer type. Open 手台設定\zadig-2.7.exe and install on "I say NYA-O". Disconnect and reconnect the TASOLLER one last time once it is done. 

 

If you ever wish to revert back to keyboard output follow the same steps but with the original firmware from here.

 

 

Part III - Running and small adjustments
A1. Start Controller_AIR_convertor.exe.
B1. Ensure both power and data are plugged in and data cable is connected to the motherboard.
1. Start Aqua's start.bat, once it shows "ALL.Net : OK" move to step 2.
2. Start \chunithm new plus\app\bin\start.bat

 

Ideally it should take a just a little bit of time, then once it gets to the LED board error tap the portion of the ground slider for next and it should load to the main splash screen.
You can then hold enter to have it read the AIME card (or hit the card button on Brokenithm-Evolved) and start playing. 


F1 and F2 should enter you into the service menu and insert a coin respectively and are also bound to FN1 and FN2 on a TASOLLER with CFW. 
You can insert 9 coins with the insert button before it no longer works for that session. You can create a new session by either restarting the program, or entering the service menu and exiting again. 
There is a way to set freeplay, as noted here doing so in the \chunithm new plus\app\bin\config_common.json file around line 105. I would recommend against setting freeplay and just lowering the game costs there to 1 and setting the max credit as you see fit, please note the maximum value of "max_credit" is 99. The reason why is you can spend 1 credit to buy the premium tickets for 6x map progression, ultima, worlds end, and character exp boost all in one.

 

Last step once everything is working normally, if you want to play Class Certification you have to update your application.properties in your Aqua folder a bit more. On lines 30 and 33 for game.chusan.version= and game.chusan.rom-version= follow the directions in the comments for the numbers. Once done save the changes and relaunch Aqua then NEW PLUS as normal, Class Certification should be enabled. If it says data is out of date then the versions entered are wrong.

If you want the option to continue after play it is toggleable in the service menu (F1/FN1).


For reference here are some of the errors as I understand them, possibly very wrong only based on anecdotal experience 
4105 | Filesystem error, unable to open a needed file. Either unable to resolve path (illegal characters in path name) or something else has that file open, like 7-zip or antivirus.
6401 | I/O error. The I/O DLL (so the chuniio_tasoller.dll or the custom chusanhook_x86.dll) didn't inialize and provide I/O data to the game. Make sure controllers are plugged in and relaunch. Also appears when set to exclusive fullscreen if resolution and refresh rate are not exact. 

 

Let me know if I missed anything or if you have any issues. 

ICF1 192 B · 74 downloads ICF2 192 B · 73 downloads

 

I managed to get it working following this but the only issue i have now is with brokenithm the air inputs dont seem to work. The input works on its own in notepad but not in Chunithm.

Does anyone know how to fix that? Spacebar is doing the air inputs but currently the air buttons are not set to spacebar so i dont understand how to fix that.

Lien vers le commentaire
Partager sur d’autres sites

--- Begin chusan_pre_startup ---
Pinned shader compiler, hMod=5DD30000
Pinned debug helper library, hMod=71F20000
DVD: hook enabled.
Chunithm IO: Using custom IO DLL: chusnio_x86.dll
USB I/O: Starting IO backend

AllK required contiguous memory = 313724 (32bit)
  8 HotK Handles: HandleSize 2084 PoolSize 16680 (bytes)
  64 LstK Handles: HandleSize 36 PoolSize 2312 (bytes)
  1024 LstInfoK Handles: HandleSize 36 PoolSize 36872 (bytes)
  64 UsbK Handles: HandleSize 56 PoolSize 3592 (bytes)
  32 DevK Handles: HandleSize 60 PoolSize 1928 (bytes)
  4096 OvlK Handles: HandleSize 60 PoolSize 245768 (bytes)
  64 OvlPoolK Handles: HandleSize 52 PoolSize 3336 (bytes)
  32 StmK Handles: HandleSize 100 PoolSize 3208 (bytes)

Dynamically allocated as needed:
        KLST_DEVINFO = 2596 bytes each

Not using Kernel driver.

====================================
=         Interface claimed        =
====================================
---  End  chusan_pre_startup ---
Clock: Returning JST timezone
Gfx: Direct3DCreate9 hook hit
Gfx: IDirect3D9::CreateDevice hook hit
Gfx: IDirect3D9:: Using Display No 0

Game processes have terminated
请按任意键继续. . .

help me plz !!

Lien vers le commentaire
Partager sur d’autres sites

--- Begin chusan_pre_startup ---
Pinned shader compiler, hMod=56340000
Pinned debug helper library, hMod=73D80000
DVD: hook enabled.
USB I/O: Starting IO backend
---  End  chusan_pre_startup ---
Clock: Returning JST timezone
Gfx: Direct3DCreate9 hook hit
Gfx: IDirect3D9::CreateDevice hook hit
Gfx: IDirect3D9:: Using Display No 1
Chunithm slider: Starting backend
Chunithm slider: Reset
Chunithm slider: Get firmware version
Chunithm slider: Start slider notifications

Game processes have terminated
Press any key to continue . . .

 

help

Lien vers le commentaire
Partager sur d’autres sites

I reinstalled it again. and i get this error:

--- Begin chusan_pre_startup ---
Pinned shader compiler, hMod=57990000
Pinned debug helper library, hMod=73D80000
DVD: hook enabled.
Vfs: Failed to create AMFS dir O:\amfs: 80070003
Vfs: Failed to create APPDATA dir O:\appdate: 80070003
Vfs: NOTE: SEGA Y: drive APPDATA, not Windows %APPDATA%.
Chunithm IO: Using custom IO DLL: chusnio_x86.dll
USB I/O: Starting IO backend

====================================
=         Device Not Found         =
====================================---  End  chusan_pre_startup ---
Clock: Returning JST timezone
Gfx: Direct3DCreate9 hook hit
Gfx: IDirect3D9::CreateDevice hook hit
Gfx: IDirect3D9:: Using Display No 0
Chunithm slider: Starting backend
Chunithm slider: Reset
Chunithm slider: Get firmware version
Chunithm slider: Start slider notifications
Logic exception occurred.
File: D:\Jenkins\workspace\amdaemon_all_build\libs\amdaemon\src\Aime.cpp
Line: 85
Function: const class amdaemon::AimeUnit &__thiscall amdaemon::Aime::getUnit(unsigned int) const
Message: `unitIndex` is out of range.
Stack:
[0x00000000004365eb] <unknown symbol> @ <unknown file>:C:\Chunithm\app\bin\chusanApp.exe
[0x0000000000f6f6e5] boost::serialization::singleton<std::set<boost::serialization::void_cast_detail::void_caster const *,boost::serialization::void_cast_detail::void_caster_compare,std::allocator<boost::serialization::void_cast_detail::void_caster const *> > >::is_destroyed @ <unknown file>:C:\Chunithm\app\bin\chusanApp.exe

Game processes have terminated
Press any key to continue . . .

Lien vers le commentaire
Partager sur d’autres sites

2 hours ago, SomePokemonFan said:

I reinstalled it again. and i get this error:

--- Begin chusan_pre_startup ---
Pinned shader compiler, hMod=57990000
Pinned debug helper library, hMod=73D80000
DVD: hook enabled.
Vfs: Failed to create AMFS dir O:\amfs: 80070003
Vfs: Failed to create APPDATA dir O:\appdate: 80070003
Vfs: NOTE: SEGA Y: drive APPDATA, not Windows %APPDATA%.
Chunithm IO: Using custom IO DLL: chusnio_x86.dll
USB I/O: Starting IO backend

====================================
=         Device Not Found         =
====================================---  End  chusan_pre_startup ---
Clock: Returning JST timezone
Gfx: Direct3DCreate9 hook hit
Gfx: IDirect3D9::CreateDevice hook hit
Gfx: IDirect3D9:: Using Display No 0
Chunithm slider: Starting backend
Chunithm slider: Reset
Chunithm slider: Get firmware version
Chunithm slider: Start slider notifications
Logic exception occurred.
File: D:\Jenkins\workspace\amdaemon_all_build\libs\amdaemon\src\Aime.cpp
Line: 85
Function: const class amdaemon::AimeUnit &__thiscall amdaemon::Aime::getUnit(unsigned int) const
Message: `unitIndex` is out of range.
Stack:
[0x00000000004365eb] <unknown symbol> @ <unknown file>:C:\Chunithm\app\bin\chusanApp.exe
[0x0000000000f6f6e5] boost::serialization::singleton<std::set<boost::serialization::void_cast_detail::void_caster const *,boost::serialization::void_cast_detail::void_caster_compare,std::allocator<boost::serialization::void_cast_detail::void_caster const *> > >::is_destroyed @ <unknown file>:C:\Chunithm\app\bin\chusanApp.exe

Game processes have terminated
Press any key to continue . . .

Hmm, your logs seem to say that it couldn't find/create the AMFS nor the APPDATA dirs... Is your segatools.ini properly set up ? Because those paths look like the default ones which are wrong and need to be changed.

Modifié par fura-7
Lien vers le commentaire
Partager sur d’autres sites

20 hours ago, e26174222 said:

had any step can make matching working?
im make my friend connect my aqua.
dose any file need to edit.
thanks :cry:

螢幕擷取畫面 2022-12-16 043746.jpg

Hmm... Have you tried setting this to "All Users" ? On this screenshot, the setting is set to "Friends Only", and I remember having trouble getting a friend of mine to play with me on actual SUN cabinets because I didn't know that there was a "Match with all users" setting (which is toggled with one of the options on the Ground Slider).

 

If this setting is set to "Friends Only", you'll have to find a way to edit your Aime Server's database to register your accounts as friends.

Modifié par fura-7
Lien vers le commentaire
Partager sur d’autres sites

59 minutes ago, fura-7 said:

Hmm... Have you tried setting this to "All Users" ? On this screenshot, the setting is set to "Friends Only", and I remember having trouble getting a friend of mine to play with me on actual SUN cabinets because I didn't know that there was a "Match with all users" setting (which is toggled with one of the options on the Ground Slider).

 

If this setting is set to "Friends Only", you'll have to find a way to edit your Aime Server's database to register your accounts as friends.

12 minutes ago, A7785371 said:

 

According to https://dev.s-ul.net/domeori/aqua/-/blob/master/docs/game_specific_notes.md matching isn't supported with Aqua.

ok i see.. thank u:etoiles:

 

 

Lien vers le commentaire
Partager sur d’autres sites

hace 8 minutos, DatGif dijo:

I just set up the game following the guide on page 31 and I got it working for guest mode, but when I try to scan my card with enter, I get this screen saying to register it. Any help with this would be appreciated.

 

image.png.a89c6426ee707ee6974284a1665a3f9b.png

scan your card in title screen

Lien vers le commentaire
Partager sur d’autres sites

--- Begin chusan_pre_startup ---
Pinned shader compiler, hMod=5FA10000
Pinned debug helper library, hMod=74A40000
USB I/O: Starting IO backend
---  End  chusan_pre_startup ---
Clock: Returning JST timezone

 

When I run the start.bat in Administrator mode, it turns out like this.

I don't know how to do, and it stops there forever.

Lien vers le commentaire
Partager sur d’autres sites

Logic exception occurred.
File: D:\Jenkins\workspace\amdaemon_all_build\libs\amdaemon\src\Aime.cpp
Line: 85
Function: const class amdaemon::AimeUnit &__thiscall amdaemon::Aime::getUnit(unsigned int) const
Message: `unitIndex` is out of range.
Stack:
[0x00000000004365eb] <unknown symbol> @ <unknown file>:C:\Users\fuur.yn\Documents\chunithm new plus\app\bin\chusanApp.exe
[0x0000000000f6f6e5] boost::serialization::singleton<std::set<boost::serialization::void_cast_detail::void_caster const *,boost::serialization::void_cast_detail::void_caster_compare,std::allocator<boost::serialization::void_cast_detail::void_caster const *> > >::is_destroyed @ <unknown file>:C:\Users\fuur.yn\Documents\chunithm new plus\app\bin\chusanApp.exe

 

 

mine crashed upon loading aime info... help would be appreciated ;-

did install following the guide on page 31, but skipped the key input steps becuz idk how to deal with them lol

Chunithm slider: Starting backend
Chunithm slider: Backend error: 80004005
VFD TX:
    00000000: e0 02 01 01 f0 f4                               ......

VFD TX:
    00000000: e0 02 01 01 f0 f4                               ......

VFD TX:
    00000000: e0 02 01 01 f0 f4                               ......

 

it said its an error but carried on to reading the aime, i completely dont understand how this works

Lien vers le commentaire
Partager sur d’autres sites

Hi everyone. So I have a few questions.

 

1. Can anyone tell me an active discord server if there is one?

 

2. Can anyone please tell me what each "A###" option files are here? http://teknoparrot.link.free.fr/multi/chunithm new.html

I know A114 is new songs but I have no idea what others are.

Should I just download all of them?

 

Sorry for having many questions. It would be really great if anyone can help me Thank you!!

 

 

Modifié par ugaru
Lien vers le commentaire
Partager sur d’autres sites

14 hours ago, ugaru said:

Hi everyone. So I have a few questions.

 

1. Can anyone tell me an active discord server if there is one?

 

2. Can anyone please tell me what each "A###" option files are here? http://teknoparrot.link.free.fr/multi/chunithm new.html

I know A114 is new songs but I have no idea what others are.

Should I just download all of them?

 

Sorry for having many questions. It would be really great if anyone can help me Thank you!!

 

 

those a### are just update that include events, new song, new characters and more

a114 are just omni pack that included songs,characters,maps,.... thats not in the lastest version of the game or being removed

Modifié par 1nterland
Lien vers le commentaire
Partager sur d’autres sites

On 12/27/2022 at 6:40 PM, haru oku said:

I have everything setup and I'm trying to run the game via game.bat and this is the error it's giving me

The version I have is New plus

image.png

As the error says, your segatools.ini file is not properly configured; in particular, the amfs key might not be set/is empty. Don't forget that you need to use the absolute path to Chunithm's AMFS folder as the value for that key! Hope it helps!

Lien vers le commentaire
Partager sur d’autres sites

3 hours ago, muetimueti said:

Is there any way to change your cosmetics in the user box after acquiring them initially?

Try using Aqua's web interface to change it. It should be accessible, by default, at your IP address, port 80 (or just enter http://localhost in your browser to open it). You'll need to then input the ID of the Aime card you generated while setting up Chunithm. Once logged in, open the side menu, and go to "User Box", and you'll be able to change your name plate, frame, title, system voice, and so on.

Lien vers le commentaire
Partager sur d’autres sites

Hey everyone, does anyone know the process to encode hca files/package the acb with Chunithm New? I found this guide but unfortunately it seems it was for Chunithm paradise and below as it just results in a completely garbled sound if you try with New. I even tried with the hca key to no avail.

Context: Trying to restore the original quality of A114 songs as the bass being removed from the 2.0 omnipack really dampen the quality, you can extract the songs from the original A114 pack to compare, it's most striking with Taiyou Iwaku Moeyo Chaos (Haiyore! Nyaruko-san OP) & Guren no Yumiya (Attack on Titans OP)

Modifié par Jordo
Lien vers le commentaire
Partager sur d’autres sites

16 hours ago, Jordo said:

Hey everyone, does anyone know the process to encode hca files/package the acb with Chunithm New?

 

Don't bother, even directly converted from Paradise to New, the sound is overly muddy and terrible. The bass being removed was the next best thing when you see what a direct conversion gives you imo.

To answer your question, you can use AcbEditor to extract the cuefiles from Paradise, and then use deretore tools with the HCA key to re-encode the wav file to New.

 

The best way would be to get a high quality MP3 or FLAC version of the songs and edit them in Audacity to match the Chunithm version beat-for-beat. Then re-encode this version into New and you've got quality that knocks everything else out of the park. The only problem is how long it takes to do.

 

Lien vers le commentaire
Partager sur d’autres sites

Hi all! Newbie here!

 

I managed to follow some tutorials I found here but i' m unable to run the game!

 

I' m getting this message running start. bat:

--- Begin chusan_pre_startup ---
Pinned shader compiler, hMod=69660000
Pinned debug helper library, hMod=6E7D0000

Game processes have terminated
Presione una tecla para continuar . . .

 

Also in a different Screen, very fast, i get the log:

NFC 00: Unimpl command 61
Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.

 

And closes automatically.

 

Someone had this error?

 

Thanks!!

Lien vers le commentaire
Partager sur d’autres sites

I think i've managed to find a solution to the problem witho some of the files uploaded in the thread (a complete bin folder did the trick)

 

I received some fake positives from Avast Antivirus.

 

Now the point is, i hve it "running" on the cmd but there is no graphic window, i mean, i cant see the game or any of the black screens with the errors other people reported.

 

Am i doing something wrong?

 

Once i open the start. bat, i have two cmd windows, one with:

 

--- Begin chusan_pre_startup ---
Pinned shader compiler, hMod=62C80000
Pinned debug helper library, hMod=6E7D0000

Game processes have terminated
Presione una tecla para continuar . . .

 

And a second one with:

--- Begin chusan_pre_startup ---
Pinned shader compiler, hMod=00007FF9F05A0000
Pinned debug helper library, hMod=00007FFA413A0000
DVD: hook enabled.
USB I/O: Starting IO backend
---  End  chusan_pre_startup ---
amdaemonExe Ver.026fb4a0 Build:Aug 27 2021 19:45:52

Process state: setup Game Mode
Security: Opened handle
Pcbid: Get PCB serial
Security: nusec_ioctl_get_nvram_geometry
Security: nusec_ioctl_get_nearfull
Hwmon: Opened device
AmVideo: amDllVideoOpen
AmVideo: amDllVideoSetResolution
AmVideo: amDllVideoClose
Netenv: GetAdaptersInfo: Virtualized LAN configuration:
Netenv: Interface IP :   192.168. 31. 11
Netenv: Router IP    :   192.168. 31.254
Netenv: MAC Address  : 01:02:03:04:05:06
Netenv: GetAdaptersInfo: Virtualized LAN configuration:
Netenv: Interface IP :   192.168. 31. 11
Netenv: Router IP    :   192.168. 31.254
Netenv: MAC Address  : 01:02:03:04:05:06
Netenv: GetAdaptersInfo: Virtualized LAN configuration:
Netenv: Interface IP :   192.168. 31. 11
Netenv: Router IP    :   192.168. 31.254
Netenv: MAC Address  : 01:02:03:04:05:06
SetupAPI: Interface {4d1e55b2-...} -> Device node $io4\vid_0ca3
USB I/O: Device opened
USB I/O: Get manufacturer string
USB I/O: Get product string
Netenv: GetBestRoute ip4 0 -> ip4 0
Clock: Returning JST timezone
USB I/O: Clear board status
USB I/O: Set comm timeout
USB I/O: Set sampling count
Error 0
USB I/O: GPIO Out
Process state: Advertise
NFC Assembly: Starting backend DLL
NFC 00: Unimpl command 61
NFC 00: Reset
Netenv: GetBestRoute ip4 0 -> ip4 c0a81f0b
Netenv: GetBestRoute ip4 0 -> ip4 c0a81f0b
start LAN install - server.
Netenv: Virtualized ICMP Ping to ip4 c0a81ffe
Netenv: Virtualized ICMP Ping to ip4 c0a81ffe
Netenv: Virtualized ICMP Ping to ip4 c0a81ffe
Netenv: Virtualized ICMP Ping to ip4 c0a81fcb
Netenv: Virtualized ICMP Ping to ip4 c0a81fcb
Netenv: Virtualized ICMP Ping to ip4 c0a81fcb
Clock: Blocked timezone update
Clock: Blocked system time update
Clock: Blocked system time update
NFC 00: Reset
RGB LED 08: Reset
RGB LED 08: Get info

 

No graphic interface.

 

Some help please?

 

EDIT:  After HOURS trying, i thing is the antivirus, it keeps locking the chusanApp, ive tried several sources from this tread with differents results but everything is locking the . exe from launching.

Avast shows either Win32: Crisis [Inf] or Win32: Evo-gen [Trj]

 

Some advice?

 

Modifié par _confus3d_
Lien vers le commentaire
Partager sur d’autres sites

Hi im having the same issue as a bunch of other people, this error keeps occuring.  im sure the segatools.ini paths are correct bc its not like the first person on this page that says "incorrect amfs path" or something like that. but idk everything should be on driver C so idk why that one is on driver D (i dont have a driver D

 

https://imgur.com/a/QCTUzaP

 

Modifié par yukaristannn
Lien vers le commentaire
Partager sur d’autres sites

I think is just that we don't have the correct .exe

 

In my case the paths are correct but chusanApp.exe is stopped by antivirus.

 

I mean, I managed to have Paradise Lost working in less than 15 minutes and perfectly configured in no more tan 10 minutes with google translator, is not that difficult.

 

Can someone post a working ChusanApp.exe so i can try again with a different source?

 

Thank you!!

 

Edit: @yukaristannn Try deleting you full "bin" folder and using the one is uploaded here. Maybe you can have a different result. http://www.emuline.org/applications/core/interface/file/attachment.php?id=19737&key=aee8ab63170b14733d4f68e086ab8047

Modifié par _confus3d_
Lien vers le commentaire
Partager sur d’autres sites

Veuillez vous connecter pour commenter

Vous pourrez laisser un commentaire après vous êtes connecté.



Connectez-vous maintenant
×
×
  • CrĂ©er...