[Arcade PC] Chunithm NEW / + / Int. / Sun / ... (S3G@ ALLS)

[buysharp]

On 3/22/2022 at 7:09 AM, Re. said:

Check the Run as administrator checkbox for inject_x64.exe and inject_x86.exe.

Could you elaborate please?

[Ivanlol]

Is there a Chunihook that can support Tasoller 1.1?

[Re.]

12 hours ago, buysharp said:

Could you elaborate please?

Right-click inject_x64.exe or inject_x86.exe and click Properties.
In the Compatibility section, check the "Run as administrator" checkbox.

[aguis1112]

how to open aqua.jar

i installed java already...

[ttj]

1 minute ago, aguis1112 said:

how to open aqua.jar

i installed java already...

Launch aqua through the "start.bat" file in the same folder. Please note that you need java 11 or above and you may have to set your JAVA_HOME variable in your system settings if not already done. There are guides online to help you through this.

[chunithm PC]

il y a 59 minutes, aguis1112 a dit :

how to open aqua.jar

i installed java already...

 installed JDK

[TotallyAnonymousHumanoid]

1 hour ago, aguis1112 said:

how to open aqua.jar

i installed java already...

Using the package mentioned here was easier for me, didn't need to install Java.

 

[sTo0z]

Anyone have any luck with these yet? Happening to both NEW and NEW PLUS. I did have NEW working, but no longer...

 

 

 

 

No idea how to link to proper images... 😄

Modifié le 28 mars 2022 par sTo0z

[TotallyAnonymousHumanoid]

On 3/25/2022 at 11:56 PM, chunithm PC said:

ok i will upload NEW plus later

Are you including all the options packs?

Also does Chunithm Paradise Lost packs included? Or is it separate game?

[thewhitewhale]

On 3/26/2022 at 2:51 AM, chunithm PC said:

https://drive.google.com/file/d/1I7DLTPGCkTM6WYw4_jioK_-LBAEWgaku/view?usp=sharing

chunithm new plus 

 

thanks for this!

I managed to follow all the steps in the README file and booted the game, all checks went OK except LED checks failed which is expected, but I currently have no input to go further.

I'm using Tasoller, I noticed in the instructions that I have to install the custom firmware on it, is this 100% required?

is there currently a way to get the out-of-the-box Tasoller firmware working on this? (the firmware that has Tasoller acting as a keyboard)

 

Thanks!

[Koishi0131]

perfectly convert old paradise lost minime server score to new plus aqua server score

using sqlite studio to edit the old table format to new table format and its work

[TotallyAnonymousHumanoid]

9 hours ago, Koishi0131 said:

perfectly convert old paradise lost minime server score to new plus aqua server score

using sqlite studio to edit the old table format to new table format and its work

Steps please, I will try myself later today?

I got both open in SQLite editor but not sure what tables you edited to new format?

Also how did you get Paradise Lost music files into Chunithm NEW? My options folder only has 3 folders.

Modifié le 29 mars 2022 par TotallyAnonymousHumanoid

[sTo0z]

Well I still can't get NEW or NEW PLUS to work on this damned machine, but I did move the SAME files over to another machine and they ran fine. Can't for the life of my figure out why it died on the other machine when NEW was running and now it won't, and NEW PLUS never ran...

 

Time to back files up and re-install Windows... 😄

 

Thanks again to all who posted files and provided help!

[karnit]

9 hours ago, sTo0z said:

Well I still can't get NEW or NEW PLUS to work on this damned machine, but I did move the SAME files over to another machine and they ran fine. Can't for the life of my figure out why it died on the other machine when NEW was running and now it won't, and NEW PLUS never ran...

 

Time to back files up and re-install Windows... 😄

 

Thanks again to all who posted files and provided help!

It happened to me too.

Are you using Ryzen series as your CPU?
I had problem with Ryzen but fine with Intel CPU

[HNN_RJJ]

3 hours ago, karnit said:

It happened to me too.

Are you using Ryzen series as your CPU?
I had problem with Ryzen but fine with Intel CPU

My case in Paradise was the problem with the AMD GPU....

Is there anyone who can use AMD GPU to run the game?

[NEKO1942]

18 hours ago, kyousuke2002 said:

why after I played 3 songs, it was displayed to continue？, and there was no trophy menu XD.

The Trophy menu is gone from New.
Only newly acquired items can be changed.

[STAGE]

1小時前，HNN_RJJ 說道：

我在天堂的案例是 AMD GPU 的問題....

有沒有人可以使用 AMD GPU 運行遊戲？

Mine is AMD RYZEN 3 that can be executed using the built-in graphics card

Modifié le 30 mars 2022 par STAGE

[sTo0z]

7 hours ago, karnit said:

It happened to me too.

Are you using Ryzen series as your CPU?
I had problem with Ryzen but fine with Intel CPU

 

Oh, interesting... I do indeed have an AMD Ryzen CPU on the non-working machine... and the working machine is Intel...

 

Still odd though, I was able to boot NEW a few times on the AMD machine, but now it won't run anymore... Anymore clues here?

 

EDIT: Come to think of it, I actually did have NEW PLUS running at one point as well, with the link from Re. earlier in the thread. However that build had its own other problems so didn't use that one anymore. Adds more to the confusion... 😄

Modifié le 30 mars 2022 par sTo0z

[tmqkqz]

그 원인을 알고 싶습니다.

Modifié le 30 mars 2022 par tmqkqz

[mmm7]

anyone know how to add a simple keyboard input? just so I can test to see if my game actually runs without crashing.

[OraimuDesR]

Does anyone know how I can modify my avatar or plate?

[theslashraga]

The game is running fine on 60hz screen, but it's slowed down on the menu

 

11 hours ago, mmm7 said:

anyone know how to add a simple keyboard input? just so I can test to see if my game actually runs without crashing.

you need to download the segatools-chusan from the first page and replace the chusanio.dll

[razvy942]

I'm stuck on this screen, any ideas what to do?

[chunithm PC]

Il y a 4 heures, razvy942 a dit :

我卡在這個屏幕上，有什麼想法嗎？

Press F1 to set your base machine

[OraimuDesR]

hace 23 horas, OraimuDesR dijo:

Does anyone know how I can modify my avatar or plate?

I have modified my avatar and plate by modifying the db data of aqua.

[mmm7]

also now stuck on the 6401 error.

if I use the setup found here: https://drive.google.com/file/d/1I7DLTPGCkTM6WYw4_jioK_-LBAEWgaku/view?usp=sharing

then I have no input because it does not use keyboard (I get stuck on the LED error screen, passed all other checks)

 

but if I use the setup in segatools-chusan found in original post then I'm stuck in error 6401, I dont believe 6401 has anything to do with CVT mode because the first setup runs it fine without it.

 

so if I can just figure out a way to run the first setup with keyboard input...

 

figured it out, see below

Modifié le 2 avril 2022 par mmm7

[Shk]

Is there any way to acquire characters from the past?

[TurdHokage]

Sorry if I'm just adding to the pile... but what are the steps to get past the LED ERROR screen?

 

In Amazon through Paradise-Lost I was able to use keyboard input to bypass it and then access the settings screen by pressing 1.

TASOLLER is running v2.0 and also has no input on this screen.  Figure its a 32key .dll file that needs to be replaced. 

Any help is appreciated!

 

[kamin]

Is it possible to play music that has been deleted in the past with chunithm new?

[mmm7]

ok I finally got everything working, will attempt to write a guide here with steps to take starting from scratch, this is exactly what I did.

 

my setup:

75ghz 2k monitor + tasoller on stock 2.0 firmware (set to 32key, it functions like a keyboard)

note: I am aware there is other ways to set up the controls with tasoller, I chose to stick with the stock 2.0 firmware and not install a custom firmware, if you wish to use a custom firmware the instructions here will not work for you

 

 

1. download the entire pack found in this comment: 

2. update your Java to v11 or later, update directX and C++ package (you most likely dont need to do this step, but if you get errors try this first)

3. download aqua 0.0.31 (you can find the link on this forum somewhere)

3. in config/application.properties in aqua, for `allnet.server.host` (should be line 14), set that equal to your own IP, (type `ipconfig` in a cmd prompt to find it), leave everything else default

4. in the chunithm download bin folder, edit your segatools.ini, following the instructions in the file, make sure you properly set the following: amfs, option, appdata, dns (use the ip you used above)

set windows=1 and framed=0

for [io3] change them to something else so they dont conflict with your tasoller, I used:, they are F1 F2 and F3

test=0x70
service=0x71
coin=0x72

enable fps120 and cvtmode, set them to 1, [aime] should be aimePath=DEVICE\aime.txt

now paste this in below 

[slider]
cell32=0x31
cell31=0x41
cell30=0x51
cell29=0x5A
cell28=0x32
cell27=0x53
cell26=0x57
cell25=0x58
cell24=0x33
cell23=0x44
cell22=0x45
cell21=0x43
cell20=0x34
cell19=0x46
cell18=0x52
cell17=0x56
cell16=0x35
cell15=0x47
cell14=0x54
cell13=0x42
cell12=0x36
cell11=0x48
cell10=0x59
cell9=0x4E
cell8=0x37
cell7=0x4A
cell6=0x55
cell5=0x4D
cell4=0x38
cell3=0x4B
cell2=0x49
cell1=0xBC

[ir]
ir6=0xdd
ir5=0xdb
ir1=0xbe
ir2=0xbf
ir3=0xba
ir4=0xde

 

and get rid of [newio86] [newio64]

5. in your DEVICE folder, create a new file called aime.txt, in the file type in 20 random numbers

6. in your chunithm folder, find the "ChunithmNEW plus tools" folder, open the webpage, find your chusanApp in your bin folder and drag it in, make sure all checkboxes are checked except "force 2 channel audio", save this file and overrwite the old one.

7. optionally add in additional data to your "option" folder, you can find a link somewhere in this topic.

8. the top post of this topic, download "chusanhook.7z", move the following files into your bin folder and overwrite(both chusanhook files, both inject files, dont move anything else)

9. make sure your monitor satisfies the following: 60hz, 1920x1080 res. (reduce them in display options if your monitor is higher refresh or res.)

10. download the converter this guy made: (otherwise the IR sensor, your hand hovering, will not work in the game)

11. run aqua (if not already), run the exe from above (yes its just a blank box), and then run your game with start.bat

 

ENJOY!

(yes the LED will error, you can just skip it, hold ENTER on your keyboard to start your aime card)

Modifié le 2 avril 2022 par mmm7

[chunithm PC]

F1 Set up the terminal

[RK'd]

11 hours ago, mmm7 said:

ok I finally got everything working, will attempt to write a guide here with steps to take starting from scratch, this is exactly what I did.

 

my setup:

75ghz 2k monitor + tasoller on stock 2.0 firmware (set to 32key, it functions like a keyboard)

note: I am aware there is other ways to set up the controls with tasoller, I chose to stick with the stock 2.0 firmware and not install a custom firmware, if you wish to use a custom firmware the instructions here will not work for you

 

 

1. download the entire pack found in this comment: 

2. update your Java to v11 or later, update directX and C++ package (you most likely dont need to do this step, but if you get errors try this first)

3. download aqua 0.0.31 (you can find the link on this forum somewhere)

3. in config/application.properties in aqua, for `allnet.server.host` (should be line 14), set that equal to your own IP, (type `ipconfig` in a cmd prompt to find it), leave everything else default

4. in the chunithm download bin folder, edit your segatools.ini, following the instructions in the file, make sure you properly set the following: amfs, option, appdata, dns (use the ip you used above)

set windows=1 and framed=0

for [io3] change them to something else so they dont conflict with your tasoller, I used:, they are F1 F2 and F3

test=0x70
service=0x71
coin=0x72

enable fps120 and cvtmode, set them to 1, [aime] should be aimePath=DEVICE\aime.txt

now paste this in below 

[slider]
cell32=0x31
cell31=0x41
cell30=0x51
cell29=0x5A
cell28=0x32
cell27=0x53
cell26=0x57
cell25=0x58
cell24=0x33
cell23=0x44
cell22=0x45
cell21=0x43
cell20=0x34
cell19=0x46
cell18=0x52
cell17=0x56
cell16=0x35
cell15=0x47
cell14=0x54
cell13=0x42
cell12=0x36
cell11=0x48
cell10=0x59
cell9=0x4E
cell8=0x37
cell7=0x4A
cell6=0x55
cell5=0x4D
cell4=0x38
cell3=0x4B
cell2=0x49
cell1=0xBC

[ir]
ir6=0xdd
ir5=0xdb
ir1=0xbe
ir2=0xbf
ir3=0xba
ir4=0xde

 

and get rid of [newio86] [newio64]

5. in your DEVICE folder, create a new file called aime.txt, in the file type in 20 random numbers

6. in your chunithm folder, find the "ChunithmNEW plus tools" folder, open the webpage, find your chusanApp in your bin folder and drag it in, make sure all checkboxes are checked except "force 2 channel audio", save this file and overrwite the old one.

7. optionally add in additional data to your "option" folder, you can find a link somewhere in this topic.

8. the top post of this topic, download "chusanhook.7z", move the following files into your bin folder and overwrite(both chusanhook files, both inject files, dont move anything else)

9. make sure your monitor satisfies the following: 60hz, 1920x1080 res. (reduce them in display options if your monitor is higher refresh or res.)

10. download the converter this guy made: (otherwise the IR sensor, your hand hovering, will not work in the game)

11. run aqua (if not already), run the exe from above (yes its just a blank box), and then run your game with start.bat

 

ENJOY!

(yes the LED will error, you can just skip it, hold ENTER on your keyboard to start your aime card)

I followed your guide but still am getting 6401 errors... 
Any ideas as to what might be going wrong? 

 

Edit:  After switching the chusan hook and inject files to the ones found in the segatools-chusan I was able to get past the errors and finally play

Modifié le 2 avril 2022 par RK'd

[TurdHokage]

On 4/2/2022 at 12:12 AM, mmm7 said:

ok I finally got everything working, will attempt to write a guide here with steps to take starting from scratch, this is exactly what I did.

 

ENJOY!

(yes the LED will error, you can just skip it, hold ENTER on your keyboard to start your aime card)

 

Thank you!  I have been out of the loop since Paradise lost dropped, but that guide was very helpful and makes the game playable.  Just needed to swap in the segatools-chusan files to bypass the 6401 error.

Modifié le 7 avril 2022 par TurdHokage

[TotallyAnonymousHumanoid]

23 hours ago, mmm7 said:

7. optionally add in additional data to your "option" folder, you can find a link somewhere in this topic.

 

Can you clarify on this one? Game is running for me with the all-in-one package, but what extra options are there?

[mmm7]

2 hours ago, TotallyAnonymousHumanoid said:

Can you clarify on this one? Game is running for me with the all-in-one package, but what extra options are there?

 

they are the A### folders, you put them into your "option" folder, they are essentially updates to the game that add more songs/characters/etc. you can find some download links at the top post, and some people have also posted other links

 

for example this is what I have currently:

 

[TotallyAnonymousHumanoid]

11 hours ago, mmm7 said:

 

they are the A### folders, you put them into your "option" folder, they are essentially updates to the game that add more songs/characters/etc. you can find some download links at the top post, and some people have also posted other links

 

for example this is what I have currently:

 

Thank you for your detailed reply. I wasn't able to figure out how to get the folders out of the VHD files, but managed to find all those folders within the old CHUNITHM NEW.rar shared below:

However unless I'm blind (our folder structure matches) I don't really see anything new. All looks like back when I only had A141, A201, A202.

 

[theslashraga]

Hi guys, here is the bin folder for 60fps, with tasoller custom firmware. You still need to change the ip in segatools.ini

bin.7z