buysharp Posté(e) le 27 mars 2022 Partager Posté(e) le 27 mars 2022 On 3/22/2022 at 7:09 AM, Re. said: Check the Run as administrator checkbox for inject_x64.exe and inject_x86.exe. Could you elaborate please? Lien vers le commentaire Partager sur d’autres sites More sharing options...
Ivanlol Posté(e) le 28 mars 2022 Partager Posté(e) le 28 mars 2022 Is there a Chunihook that can support Tasoller 1.1? Lien vers le commentaire Partager sur d’autres sites More sharing options...
Re. Posté(e) le 28 mars 2022 Partager Posté(e) le 28 mars 2022 12 hours ago, buysharp said: Could you elaborate please? Right-click inject_x64.exe or inject_x86.exe and click Properties. In the Compatibility section, check the "Run as administrator" checkbox. Lien vers le commentaire Partager sur d’autres sites More sharing options...
aguis1112 Posté(e) le 28 mars 2022 Partager Posté(e) le 28 mars 2022 how to open aqua.jar i installed java already... Lien vers le commentaire Partager sur d’autres sites More sharing options...
ttj Posté(e) le 28 mars 2022 Partager Posté(e) le 28 mars 2022 1 minute ago, aguis1112 said: how to open aqua.jar i installed java already... Launch aqua through the "start.bat" file in the same folder. Please note that you need java 11 or above and you may have to set your JAVA_HOME variable in your system settings if not already done. There are guides online to help you through this. Lien vers le commentaire Partager sur d’autres sites More sharing options...
chunithm PC Posté(e) le 28 mars 2022 Partager Posté(e) le 28 mars 2022 il y a 59 minutes, aguis1112 a dit : how to open aqua.jar i installed java already... installed JDK Lien vers le commentaire Partager sur d’autres sites More sharing options...
TotallyAnonymousHumanoid Posté(e) le 28 mars 2022 Partager Posté(e) le 28 mars 2022 1 hour ago, aguis1112 said: how to open aqua.jar i installed java already... Using the package mentioned here was easier for me, didn't need to install Java. 2 Lien vers le commentaire Partager sur d’autres sites More sharing options...
sTo0z Posté(e) le 28 mars 2022 Partager Posté(e) le 28 mars 2022 (modifié) Anyone have any luck with these yet? Happening to both NEW and NEW PLUS. I did have NEW working, but no longer... No idea how to link to proper images... 😄 Modifié le 28 mars 2022 par sTo0z Lien vers le commentaire Partager sur d’autres sites More sharing options...
TotallyAnonymousHumanoid Posté(e) le 29 mars 2022 Partager Posté(e) le 29 mars 2022 On 3/25/2022 at 11:56 PM, chunithm PC said: ok i will upload NEW plus later Are you including all the options packs? Also does Chunithm Paradise Lost packs included? Or is it separate game? Lien vers le commentaire Partager sur d’autres sites More sharing options...
thewhitewhale Posté(e) le 29 mars 2022 Partager Posté(e) le 29 mars 2022 On 3/26/2022 at 2:51 AM, chunithm PC said: https://drive.google.com/file/d/1I7DLTPGCkTM6WYw4_jioK_-LBAEWgaku/view?usp=sharing chunithm new plus thanks for this! I managed to follow all the steps in the README file and booted the game, all checks went OK except LED checks failed which is expected, but I currently have no input to go further. I'm using Tasoller, I noticed in the instructions that I have to install the custom firmware on it, is this 100% required? is there currently a way to get the out-of-the-box Tasoller firmware working on this? (the firmware that has Tasoller acting as a keyboard) Thanks! Lien vers le commentaire Partager sur d’autres sites More sharing options...
Koishi0131 Posté(e) le 29 mars 2022 Partager Posté(e) le 29 mars 2022 perfectly convert old paradise lost minime server score to new plus aqua server score using sqlite studio to edit the old table format to new table format and its work Lien vers le commentaire Partager sur d’autres sites More sharing options...
TotallyAnonymousHumanoid Posté(e) le 29 mars 2022 Partager Posté(e) le 29 mars 2022 (modifié) 9 hours ago, Koishi0131 said: perfectly convert old paradise lost minime server score to new plus aqua server score using sqlite studio to edit the old table format to new table format and its work Steps please, I will try myself later today? I got both open in SQLite editor but not sure what tables you edited to new format? Also how did you get Paradise Lost music files into Chunithm NEW? My options folder only has 3 folders. Modifié le 29 mars 2022 par TotallyAnonymousHumanoid Lien vers le commentaire Partager sur d’autres sites More sharing options...
sTo0z Posté(e) le 29 mars 2022 Partager Posté(e) le 29 mars 2022 Well I still can't get NEW or NEW PLUS to work on this damned machine, but I did move the SAME files over to another machine and they ran fine. Can't for the life of my figure out why it died on the other machine when NEW was running and now it won't, and NEW PLUS never ran... Time to back files up and re-install Windows... 😄 Thanks again to all who posted files and provided help! Lien vers le commentaire Partager sur d’autres sites More sharing options...
karnit Posté(e) le 30 mars 2022 Partager Posté(e) le 30 mars 2022 9 hours ago, sTo0z said: Well I still can't get NEW or NEW PLUS to work on this damned machine, but I did move the SAME files over to another machine and they ran fine. Can't for the life of my figure out why it died on the other machine when NEW was running and now it won't, and NEW PLUS never ran... Time to back files up and re-install Windows... 😄 Thanks again to all who posted files and provided help! It happened to me too. Are you using Ryzen series as your CPU? I had problem with Ryzen but fine with Intel CPU Lien vers le commentaire Partager sur d’autres sites More sharing options...
HNN_RJJ Posté(e) le 30 mars 2022 Partager Posté(e) le 30 mars 2022 3 hours ago, karnit said: It happened to me too. Are you using Ryzen series as your CPU? I had problem with Ryzen but fine with Intel CPU My case in Paradise was the problem with the AMD GPU.... Is there anyone who can use AMD GPU to run the game? Lien vers le commentaire Partager sur d’autres sites More sharing options...
NEKO1942 Posté(e) le 30 mars 2022 Partager Posté(e) le 30 mars 2022 18 hours ago, kyousuke2002 said: why after I played 3 songs, it was displayed to continue?, and there was no trophy menu XD. The Trophy menu is gone from New. Only newly acquired items can be changed. Lien vers le commentaire Partager sur d’autres sites More sharing options...
STAGE Posté(e) le 30 mars 2022 Partager Posté(e) le 30 mars 2022 (modifié) 1小時前,HNN_RJJ 說道: 我在天堂的案例是 AMD GPU 的問題.... 有沒有人可以使用 AMD GPU 運行遊戲? Mine is AMD RYZEN 3 that can be executed using the built-in graphics card Modifié le 30 mars 2022 par STAGE Lien vers le commentaire Partager sur d’autres sites More sharing options...
sTo0z Posté(e) le 30 mars 2022 Partager Posté(e) le 30 mars 2022 (modifié) 7 hours ago, karnit said: It happened to me too. Are you using Ryzen series as your CPU? I had problem with Ryzen but fine with Intel CPU Oh, interesting... I do indeed have an AMD Ryzen CPU on the non-working machine... and the working machine is Intel... Still odd though, I was able to boot NEW a few times on the AMD machine, but now it won't run anymore... Anymore clues here? EDIT: Come to think of it, I actually did have NEW PLUS running at one point as well, with the link from Re. earlier in the thread. However that build had its own other problems so didn't use that one anymore. Adds more to the confusion... 😄 Modifié le 30 mars 2022 par sTo0z Lien vers le commentaire Partager sur d’autres sites More sharing options...
tmqkqz Posté(e) le 30 mars 2022 Partager Posté(e) le 30 mars 2022 (modifié) 그 원인을 알고 싶습니다. Modifié le 30 mars 2022 par tmqkqz Lien vers le commentaire Partager sur d’autres sites More sharing options...
mmm7 Posté(e) le 30 mars 2022 Partager Posté(e) le 30 mars 2022 anyone know how to add a simple keyboard input? just so I can test to see if my game actually runs without crashing. Lien vers le commentaire Partager sur d’autres sites More sharing options...
OraimuDesR Posté(e) le 30 mars 2022 Partager Posté(e) le 30 mars 2022 Does anyone know how I can modify my avatar or plate? Lien vers le commentaire Partager sur d’autres sites More sharing options...
theslashraga Posté(e) le 31 mars 2022 Partager Posté(e) le 31 mars 2022 The game is running fine on 60hz screen, but it's slowed down on the menu 11 hours ago, mmm7 said: anyone know how to add a simple keyboard input? just so I can test to see if my game actually runs without crashing. you need to download the segatools-chusan from the first page and replace the chusanio.dll Lien vers le commentaire Partager sur d’autres sites More sharing options...
razvy942 Posté(e) le 31 mars 2022 Partager Posté(e) le 31 mars 2022 I'm stuck on this screen, any ideas what to do? Lien vers le commentaire Partager sur d’autres sites More sharing options...
chunithm PC Posté(e) le 31 mars 2022 Partager Posté(e) le 31 mars 2022 Il y a 4 heures, razvy942 a dit : 我卡在這個屏幕上,有什麼想法嗎? Press F1 to set your base machine Lien vers le commentaire Partager sur d’autres sites More sharing options...
OraimuDesR Posté(e) le 31 mars 2022 Partager Posté(e) le 31 mars 2022 hace 23 horas, OraimuDesR dijo: Does anyone know how I can modify my avatar or plate? I have modified my avatar and plate by modifying the db data of aqua. Lien vers le commentaire Partager sur d’autres sites More sharing options...
mmm7 Posté(e) le 1 avril 2022 Partager Posté(e) le 1 avril 2022 (modifié) also now stuck on the 6401 error. if I use the setup found here: https://drive.google.com/file/d/1I7DLTPGCkTM6WYw4_jioK_-LBAEWgaku/view?usp=sharing then I have no input because it does not use keyboard (I get stuck on the LED error screen, passed all other checks) but if I use the setup in segatools-chusan found in original post then I'm stuck in error 6401, I dont believe 6401 has anything to do with CVT mode because the first setup runs it fine without it. so if I can just figure out a way to run the first setup with keyboard input... figured it out, see below Modifié le 2 avril 2022 par mmm7 Lien vers le commentaire Partager sur d’autres sites More sharing options...
Shk Posté(e) le 1 avril 2022 Partager Posté(e) le 1 avril 2022 Is there any way to acquire characters from the past? Lien vers le commentaire Partager sur d’autres sites More sharing options...
TurdHokage Posté(e) le 2 avril 2022 Partager Posté(e) le 2 avril 2022 Sorry if I'm just adding to the pile... but what are the steps to get past the LED ERROR screen? In Amazon through Paradise-Lost I was able to use keyboard input to bypass it and then access the settings screen by pressing 1. TASOLLER is running v2.0 and also has no input on this screen. Figure its a 32key .dll file that needs to be replaced. Any help is appreciated! Lien vers le commentaire Partager sur d’autres sites More sharing options...
kamin Posté(e) le 2 avril 2022 Partager Posté(e) le 2 avril 2022 Is it possible to play music that has been deleted in the past with chunithm new? Lien vers le commentaire Partager sur d’autres sites More sharing options...
mmm7 Posté(e) le 2 avril 2022 Partager Posté(e) le 2 avril 2022 (modifié) ok I finally got everything working, will attempt to write a guide here with steps to take starting from scratch, this is exactly what I did. my setup: 75ghz 2k monitor + tasoller on stock 2.0 firmware (set to 32key, it functions like a keyboard) note: I am aware there is other ways to set up the controls with tasoller, I chose to stick with the stock 2.0 firmware and not install a custom firmware, if you wish to use a custom firmware the instructions here will not work for you 1. download the entire pack found in this comment: 2. update your Java to v11 or later, update directX and C++ package (you most likely dont need to do this step, but if you get errors try this first) 3. download aqua 0.0.31 (you can find the link on this forum somewhere) 3. in config/application.properties in aqua, for `allnet.server.host` (should be line 14), set that equal to your own IP, (type `ipconfig` in a cmd prompt to find it), leave everything else default 4. in the chunithm download bin folder, edit your segatools.ini, following the instructions in the file, make sure you properly set the following: amfs, option, appdata, dns (use the ip you used above) set windows=1 and framed=0 for [io3] change them to something else so they dont conflict with your tasoller, I used:, they are F1 F2 and F3 test=0x70 service=0x71 coin=0x72 enable fps120 and cvtmode, set them to 1, [aime] should be aimePath=DEVICE\aime.txt now paste this in below [slider] cell32=0x31 cell31=0x41 cell30=0x51 cell29=0x5A cell28=0x32 cell27=0x53 cell26=0x57 cell25=0x58 cell24=0x33 cell23=0x44 cell22=0x45 cell21=0x43 cell20=0x34 cell19=0x46 cell18=0x52 cell17=0x56 cell16=0x35 cell15=0x47 cell14=0x54 cell13=0x42 cell12=0x36 cell11=0x48 cell10=0x59 cell9=0x4E cell8=0x37 cell7=0x4A cell6=0x55 cell5=0x4D cell4=0x38 cell3=0x4B cell2=0x49 cell1=0xBC [ir] ir6=0xdd ir5=0xdb ir1=0xbe ir2=0xbf ir3=0xba ir4=0xde and get rid of [newio86] [newio64] 5. in your DEVICE folder, create a new file called aime.txt, in the file type in 20 random numbers 6. in your chunithm folder, find the "ChunithmNEW plus tools" folder, open the webpage, find your chusanApp in your bin folder and drag it in, make sure all checkboxes are checked except "force 2 channel audio", save this file and overrwite the old one. 7. optionally add in additional data to your "option" folder, you can find a link somewhere in this topic. 8. the top post of this topic, download "chusanhook.7z", move the following files into your bin folder and overwrite(both chusanhook files, both inject files, dont move anything else) 9. make sure your monitor satisfies the following: 60hz, 1920x1080 res. (reduce them in display options if your monitor is higher refresh or res.) 10. download the converter this guy made: (otherwise the IR sensor, your hand hovering, will not work in the game) 11. run aqua (if not already), run the exe from above (yes its just a blank box), and then run your game with start.bat ENJOY! (yes the LED will error, you can just skip it, hold ENTER on your keyboard to start your aime card) Modifié le 2 avril 2022 par mmm7 10 Lien vers le commentaire Partager sur d’autres sites More sharing options...
chunithm PC Posté(e) le 2 avril 2022 Partager Posté(e) le 2 avril 2022 F1 Set up the terminal Lien vers le commentaire Partager sur d’autres sites More sharing options...
RK'd Posté(e) le 2 avril 2022 Partager Posté(e) le 2 avril 2022 (modifié) 11 hours ago, mmm7 said: ok I finally got everything working, will attempt to write a guide here with steps to take starting from scratch, this is exactly what I did. my setup: 75ghz 2k monitor + tasoller on stock 2.0 firmware (set to 32key, it functions like a keyboard) note: I am aware there is other ways to set up the controls with tasoller, I chose to stick with the stock 2.0 firmware and not install a custom firmware, if you wish to use a custom firmware the instructions here will not work for you 1. download the entire pack found in this comment: 2. update your Java to v11 or later, update directX and C++ package (you most likely dont need to do this step, but if you get errors try this first) 3. download aqua 0.0.31 (you can find the link on this forum somewhere) 3. in config/application.properties in aqua, for `allnet.server.host` (should be line 14), set that equal to your own IP, (type `ipconfig` in a cmd prompt to find it), leave everything else default 4. in the chunithm download bin folder, edit your segatools.ini, following the instructions in the file, make sure you properly set the following: amfs, option, appdata, dns (use the ip you used above) set windows=1 and framed=0 for [io3] change them to something else so they dont conflict with your tasoller, I used:, they are F1 F2 and F3 test=0x70 service=0x71 coin=0x72 enable fps120 and cvtmode, set them to 1, [aime] should be aimePath=DEVICE\aime.txt now paste this in below [slider] cell32=0x31 cell31=0x41 cell30=0x51 cell29=0x5A cell28=0x32 cell27=0x53 cell26=0x57 cell25=0x58 cell24=0x33 cell23=0x44 cell22=0x45 cell21=0x43 cell20=0x34 cell19=0x46 cell18=0x52 cell17=0x56 cell16=0x35 cell15=0x47 cell14=0x54 cell13=0x42 cell12=0x36 cell11=0x48 cell10=0x59 cell9=0x4E cell8=0x37 cell7=0x4A cell6=0x55 cell5=0x4D cell4=0x38 cell3=0x4B cell2=0x49 cell1=0xBC [ir] ir6=0xdd ir5=0xdb ir1=0xbe ir2=0xbf ir3=0xba ir4=0xde and get rid of [newio86] [newio64] 5. in your DEVICE folder, create a new file called aime.txt, in the file type in 20 random numbers 6. in your chunithm folder, find the "ChunithmNEW plus tools" folder, open the webpage, find your chusanApp in your bin folder and drag it in, make sure all checkboxes are checked except "force 2 channel audio", save this file and overrwite the old one. 7. optionally add in additional data to your "option" folder, you can find a link somewhere in this topic. 8. the top post of this topic, download "chusanhook.7z", move the following files into your bin folder and overwrite(both chusanhook files, both inject files, dont move anything else) 9. make sure your monitor satisfies the following: 60hz, 1920x1080 res. (reduce them in display options if your monitor is higher refresh or res.) 10. download the converter this guy made: (otherwise the IR sensor, your hand hovering, will not work in the game) 11. run aqua (if not already), run the exe from above (yes its just a blank box), and then run your game with start.bat ENJOY! (yes the LED will error, you can just skip it, hold ENTER on your keyboard to start your aime card) I followed your guide but still am getting 6401 errors... Any ideas as to what might be going wrong? Edit: After switching the chusan hook and inject files to the ones found in the segatools-chusan I was able to get past the errors and finally play Modifié le 2 avril 2022 par RK'd Lien vers le commentaire Partager sur d’autres sites More sharing options...
TurdHokage Posté(e) le 3 avril 2022 Partager Posté(e) le 3 avril 2022 (modifié) On 4/2/2022 at 12:12 AM, mmm7 said: ok I finally got everything working, will attempt to write a guide here with steps to take starting from scratch, this is exactly what I did. ENJOY! (yes the LED will error, you can just skip it, hold ENTER on your keyboard to start your aime card) Thank you! I have been out of the loop since Paradise lost dropped, but that guide was very helpful and makes the game playable. Just needed to swap in the segatools-chusan files to bypass the 6401 error. Modifié le 7 avril 2022 par TurdHokage Lien vers le commentaire Partager sur d’autres sites More sharing options...
TotallyAnonymousHumanoid Posté(e) le 3 avril 2022 Partager Posté(e) le 3 avril 2022 23 hours ago, mmm7 said: 7. optionally add in additional data to your "option" folder, you can find a link somewhere in this topic. Can you clarify on this one? Game is running for me with the all-in-one package, but what extra options are there? Lien vers le commentaire Partager sur d’autres sites More sharing options...
mmm7 Posté(e) le 3 avril 2022 Partager Posté(e) le 3 avril 2022 2 hours ago, TotallyAnonymousHumanoid said: Can you clarify on this one? Game is running for me with the all-in-one package, but what extra options are there? they are the A### folders, you put them into your "option" folder, they are essentially updates to the game that add more songs/characters/etc. you can find some download links at the top post, and some people have also posted other links for example this is what I have currently: 1 Lien vers le commentaire Partager sur d’autres sites More sharing options...
TotallyAnonymousHumanoid Posté(e) le 3 avril 2022 Partager Posté(e) le 3 avril 2022 11 hours ago, mmm7 said: they are the A### folders, you put them into your "option" folder, they are essentially updates to the game that add more songs/characters/etc. you can find some download links at the top post, and some people have also posted other links for example this is what I have currently: Thank you for your detailed reply. I wasn't able to figure out how to get the folders out of the VHD files, but managed to find all those folders within the old CHUNITHM NEW.rar shared below: However unless I'm blind (our folder structure matches) I don't really see anything new. All looks like back when I only had A141, A201, A202. Lien vers le commentaire Partager sur d’autres sites More sharing options...
theslashraga Posté(e) le 3 avril 2022 Partager Posté(e) le 3 avril 2022 Hi guys, here is the bin folder for 60fps, with tasoller custom firmware. You still need to change the ip in segatools.ini bin.7z Lien vers le commentaire Partager sur d’autres sites More sharing options...
Messages recommandés
Veuillez vous connecter pour commenter
Vous pourrez laisser un commentaire après vous êtes connecté.
Connectez-vous maintenant