[Arcade PC] Chunithm NEW / + / Int. / Sun / ... (S3G@ ALLS)

[Re.]

Where do I place aime.txt?

[catzpat123]

Just now, Re. said:

Where do I place aime.txt?

in DEVICE folder

 

[wmsyr]

13 minutes ago, catzpat123 said:

pm me in DC khanh199#9035

how to pm you? I can't understand what DC khanh199#9035 means

[catzpat123]

Just now, wmsyr said:

how to pm you? I can't understand what DC khanh199 # 9035 means

discord

[Re.]

6 minutes ago, catzpat123 said:

DEVICEフォルダ内

 

Is this the right place?

[cqc]

How do I set the timer to ∞?

[catzpat123]

22 minutes ago, Re. Said:

Is this the right place?

yes

12 minutes ago, cqc said:

How do I set the timer to ∞?

now only 999 available

https://elpis.fun/gamepatcher/chusan.html

Modifié le 17 mars 2022 par catzpat123

[7zxkv]

Il y a 1 heure, Re. a dit :

https://9.gigafile.nu/0516-ge4d7a414257a713c535dd038fdd06fda

Thank you for waiting
The upload has just been completed.
Please download CHUNITHMNEWPLUS from the link above!

what is the difference with the previous version available a few days ago?

 

Il y a 11 heures, aulcfna a dit :

try https://files.catbox.moe/quu81f.zip

what is this archive for?

Modifié le 17 mars 2022 par 7zxkv

[Re.]

7 minutes ago, 7zxkv said:

what is the difference with the previous version available a few days ago?

This solves the problem that even if the network check shows OK, the lower right corner shows the offline mark!
The chusanApp itself is a NEW one, not NEWPLUS, so some of the indications may be incorrect.

[yip10101]

I can't use my tasoller when usb-server.exe active,why.....

[YOJI]

Il y a 2 heures, Re. a dit :

https://9.gigafile.nu/0516-ge4d7a414257a713c535dd038fdd06fda

기다려 주셔서 감사합니다
. 업로드가 방금 완료되었습니다.
위 링크에서 CHUNITHMNEWPLUS를 다운로드하세요!

Can play?

or only run?

[Kimdo]

il y a 12 minutes, YOJI a dit :

Can play?

or only run?

 

this is playable but not normally

[Re.]

14 minutes ago, YOJI said:

遊べる？

または実行するだけですか？

You can play the score, but you can't use TASOLLER.

 

[YOJI]

il y a 4 minutes, Re. a dit :

악보는 연주할 수 있지만 TASOLLER는 사용할 수 없습니다.

 

Thank you 

This file download time is 3hour haha ㅠㅠ

[YOJI]

Help

I used only mimime

I don't know use aqua... help!

[akiroz]

Chunithm NEW support added for chuniio-tasoller

 

Release & documentation: https://dev.s-ul.net/akiroz/chuniio-tasoller/-/blob/master/README.md

[yip10101]

the audio format is 24bit/48khz?

[chunithm PC]

Text1:over

[aulcfna]

5 hours ago, 7zxkv said:

what is this archive for?

This is just the compiled files for this:
https://github.com/caxerx/chuniio_tasoller_new

as I was able to successfully compile it with rust, however judging by the thread it looks like it hasn't worked for everyone. 

[aulcfna]

8 hours ago, Re. said:

https://9.gigafile.nu/0516-ge4d7a414257a713c535dd038fdd06fda

Thank you for waiting
The upload has just been completed.
Please download CHUNITHMNEWPLUS from the link above!

It seems some issue with amdaemon/chusanapp exes, whether it be specific to my system or not

https://pastebin.com/6mzbbeHX for cmd log, 

 

[file] ..\src\am\AmManager.cpp
[line] 199
[func] void __thiscall projSys::AmManager::recieveExceptionFromAmDaemon(const class amdaemon::Exception &)
[text] Logic exception occurred.
File: D:\Jenkins\workspace\amdaemon_all_build\libs\amdaemon\src\Aime.cpp
Line: 85
Function: const class amdaemon::AimeUnit &__thiscall amdaemon::Aime::getUnit(unsigned int) const
Message: `unitIndex` is out of range.
Stack:
[0x00000000004365db] <unknown symbol> @ <unknown file>:D:\newplus\newplus\app\bin\chusanApp.exe
[0x0000000000f59295] boost::serialization::singleton<std::set<boost::serialization::void_cast_detail::void_caster const *,boost::serialization::void_cast_detail::void_caster_compare,std::allocator<boost::serialization::void_cast_detail::void_caster const *> > >::is_destroyed @ <unknown file>:D:\newplus\newplus\app\bin\chusanApp.exe

is what's returning on the assert log. different exes behave differently, original NEW dump exes return 'invalid config' , the one from the original NEW+ dump in the thread return 4104 immediately and refuse to launch.

[AlucardTheGamer]

Does anyone know if there's a way to enable the rainbow nameplate without being 16.00 in aqua?

[akiroz]

8 hours ago, 7zxkv said:

can someone post the aqua 31 binary thanks.

Here's a standalone exe that doesn't require java installed
https://drive.google.com/file/d/1lXCRveyaQPXuX5lhQEksKG8IhsbKvZno/view?usp=sharing

 

I've also submitted this change upstream so hopefully this will be the de-facto distribution method from the next version on if it gets approved.

Modifié le 17 mars 2022 par akiroz

[bakuretsuchan]

24 minutes ago, aulcfna said:

It seems some issue with amdaemon/chusanapp exes, whether it be specific to my system or not

https://pastebin.com/6mzbbeHX for cmd log, 

 

[file] ..\src\am\AmManager.cpp
[line] 199
[func] void __thiscall projSys::AmManager::recieveExceptionFromAmDaemon(const class amdaemon::Exception &)
[text] Logic exception occurred.
File: D:\Jenkins\workspace\amdaemon_all_build\libs\amdaemon\src\Aime.cpp
Line: 85
Function: const class amdaemon::AimeUnit &__thiscall amdaemon::Aime::getUnit(unsigned int) const
Message: `unitIndex` is out of range.
Stack:
[0x00000000004365db] <unknown symbol> @ <unknown file>:D:\newplus\newplus\app\bin\chusanApp.exe
[0x0000000000f59295] boost::serialization::singleton<std::set<boost::serialization::void_cast_detail::void_caster const *,boost::serialization::void_cast_detail::void_caster_compare,std::allocator<boost::serialization::void_cast_detail::void_caster const *> > >::is_destroyed @ <unknown file>:D:\newplus\newplus\app\bin\chusanApp.exe

is what's returning on the assert log. different exes behave differently, original NEW dump exes return 'invalid config' , the one from the original NEW+ dump in the thread return 4104 immediately and refuse to launch.

 

For me the game launched and was playable until i replaced the chuniio dll files for tasoller, since then i get the same errors. Did you replace them too or did you launch it as-is?

[aulcfna]

1 minute ago, bakuretsuchan said:

For me the game launched and was playable until i replaced the chuniio dll files for tasoller, since then i get the same errors. Did you replace them too or did you launch it as-is?

The setup is incorrect as-is, so I did reconfigure. I'm moving over to the chuniio in the main post as that doesn't require the usb server etc.

Running as is doesn't launch for me however. So that must mean there's something to do with specific system info or just where the game is etc. I'll tinker around and try to figure it out

[akiroz]

7 hours ago, yip10101 said:

I can't use my tasoller when usb-server.exe active,why.....

 

You could try my version if you like, it doesn't require usb-server:

4 hours ago, akiroz said:

Chunithm NEW support added for chuniio-tasoller

 

Release & documentation: https://dev.s-ul.net/akiroz/chuniio-tasoller/-/blob/master/README.md

 

[bakuretsuchan]

13 minutes ago, akiroz said:

 

You could try my version if you like, it doesn't require usb-server:

 

I tried your version but when i include your dlls i get the exact error aulcfna posted. When i comment out the dlls the game launches normally

[asali]

Does anyone have chuniio dll for openithm controller

[aulcfna]

31 minutes ago, akiroz said:

You could try my version if you like, it doesn't require usb-server:

It seems as soon as 

[chuniio]
chusan=1
path=chuniio_tasoller.dll

is placed into segatools.ini , is when it brings up 4104/invalid config/unitindex issues. when this isn't in the .ini i can run the game now.

did you have a specific place you intended for this to be placed, and am I correct in thinking we need a segatools_64.ini with path=chuniio_tasoller_x64.dll as well ? 

how exactly did you want this set up?

Modifié le 17 mars 2022 par aulcfna

[akiroz]

5 minutes ago, aulcfna said:

It seems as soon as 

[chuniio]
chusan=1
path=chuniio_tasoller.dll

is placed into segatools.ini , is when it brings up 4104/invalid config/unitindex issues. when this isn't in the .ini i can run the game now.

did you have a specific place you intended for this to be placed, and am I correct in thinking we need a segatools_64.ini with path=chuniio_tasoller_x64.dll as well ? 

how exactly did you want this set up?

The 2 dlls need to be included in 2 seperate processes, I assume you had a script that swaps out the ini between the 2 process launches just like with other io dlls?

[aulcfna]

2 minutes ago, akiroz said:

The 2 dlls need to be included in 2 seperate processes, I assume you had a script that swaps out the ini between the 2 process launches just like with other io dlls?

Ah right, I see what you mean, my mistake 😧

The other io dlls had provided an example that worked right away, however I wouldn't have a clue on how to write it up for this instance.

Would you be able to share how you've got yours set up as an example ?

[akiroz]

16 minutes ago, aulcfna said:

Ah right, I see what you mean, my mistake 😧

The other io dlls had provided an example that worked right away, however I wouldn't have a clue on how to write it up for this instance.

Would you be able to share how you've got yours set up as an example ?

I pretty much used the same script as caxerx
except the usb-server line was removed and in each ini, I had

path=chuniio_tasoller.dll
and
path=chuniio_tasoller_x64.dll
respectively.

I edited the readme to make it a bit clearer hopefully.

Modifié le 17 mars 2022 par akiroz

[aulcfna]

13 minutes ago, akiroz said:

I pretty much used the same script as caxerx
except the usb-server line was removed and in each ini, I had

path=chuniio_tasoller.dll
and
path=chuniio_tasoller_x64.dll
respectively.

To confirm, you are using NEW+ ?

This works perfectly fine for me on NEW , however will refuse with 4104 on NEW+

[akiroz]

3 minutes ago, aulcfna said:

To confirm, you are using NEW+ ?

This works perfectly fine for me on NEW , however will refuse with 4104 on NEW+

Yes, I'm on 2.05.00. That's weird....
EDIT: But ROM ver is 2.00.01
Maybe I'm actually on NEW but with NEW+ content? I'm not sure...

Modifié le 17 mars 2022 par akiroz

[aulcfna]

6 minutes ago, akiroz said:

Yes, I'm on 2.05.00. That's weird....

I can only assume it's 2.05 specific then, but the question is what lmao

caxerx's ios also don't work for me in 2.05 as well.

 

I'll take close looks to try and figure out what the difference is I guess, in theory there shouldn't be anything wrong

 

[akiroz]

Just now, aulcfna said:

I can only assume it's 2.05 specific then, but the question is what lmao

caxerx's ios also don't work for me in 2.05 as well.

 

I'll take close looks to try and figure out what the difference is I guess, in theory there shouldn't be anything wrong

 

What's your ROM version shown in the "Game Information" under the test menu?

[aulcfna]

4 minutes ago, akiroz said:

What's your ROM version shown in the "Game Information" under the test menu?

2.00.01 on NEW+, so that's data issue then.

[musani]

The chuniio files makes the tasoller work on NEW, and that's great, but it's still inaccurate. Accuracy is low in songs, and sometimes when navigating the menu it inputs the wrong response (as in when pressing to change genre, it would think that I want to scroll left)

 

I think that caverx's chuniio is more accurate, with the one that doesnt require ubs-server i've been hitting a lot of fast even with high offsets

Modifié le 18 mars 2022 par musani
more info