Lesteph25 Posté(e) le 20 décembre 2021 Posté(e) le 20 décembre 2021 Le 19/12/2021 à 01:26, ryuzo7980 a dit : 44100hz lol LOL, it was late, sorry
Melone01 Posté(e) le 20 décembre 2021 Posté(e) le 20 décembre 2021 11 hours ago, WZ-XXY said: ty remove -ea That just gives me this error. Setting it to free play allows me to play the game though
WZ-XXY Posté(e) le 21 décembre 2021 Posté(e) le 21 décembre 2021 (modifié) emm. have you take down asphyxia url. i mean its -url http://localhost:8083 and make sure your asphyxia-core has bistrover plugins and open it with the game start Modifié le 21 décembre 2021 par WZ-XXY
NeoMegaX Posté(e) le 21 décembre 2021 Posté(e) le 21 décembre 2021 On 12/13/2021 at 8:31 PM, Lesteph25 said: for turntable sensivity, change this in your "iidxhook-28.conf" : ------------- # Turntable sensitivity multiplier (1.0 is default) io.tt_multiplier=0.6 ------------- and for you désync : the monitor check must be like 119.9XXX (the 2 digit in red may be flucting, but the 119.9XXX ou 119.8XXX must be stable) force 120fps is a bad idee. prefer force Vsync 120Hz with this method for exemple : Prefered refresh rate = Application-controlled the sync calculated at the start of the game is absolutely essential to this game, and even with a correct base. it is so precise that I knew a time when we bought very specific hardware models (such as the graphics card by ex) to be as close as possible to the arcade sync. this parameter is VERY important, it is the very foundations of the game. do not neglect it. I now have bemanitools including the config file you talked about. However, I'm not sure if I can run this with Spice64 like I have been using. I'm assuming you now have to use the gamestart28 file in the bemanitools folder but that gives me errors because of missing avs2-core.dll and avs2ea3.dll
Jmoney122235 Posté(e) le 21 décembre 2021 Posté(e) le 21 décembre 2021 Anyone know how to fix this? Trying to make a profile on the game and when I finish I get an error. Don't know if I need to reinstall something or change a setting, thanks for any help!
nanashiii Posté(e) le 22 décembre 2021 Posté(e) le 22 décembre 2021 (modifié) Even if SPICECFG.EXE is executed, it does not respond and does not turn on. When I look at the task manager, it turns on for a while and then turns off automatically. I tried turning off the antivirus or running it with administrator rights. Does anyone have a situation like me or know a solution? please help me Sorry for the translation. Modifié le 22 décembre 2021 par nanashiii
Lesteph25 Posté(e) le 22 décembre 2021 Posté(e) le 22 décembre 2021 Le 21/12/2021 à 03:09, NeoMegaX a dit : I now have bemanitools including the config file you talked about. However, I'm not sure if I can run this with Spice64 like I have been using. I'm assuming you now have to use the gamestart28 file in the bemanitools folder but that gives me errors because of missing avs2-core.dll and avs2ea3.dll yes launch with gamestart28.bat avs2-core.dll and avs2ea3.dll can they be in the "module" folder? if so, copy all the files that are in the "module" folder and paste them in the "content" folder
NeoMegaX Posté(e) le 23 décembre 2021 Posté(e) le 23 décembre 2021 22 hours ago, Lesteph25 said: yes launch with gamestart28.bat avs2-core.dll and avs2ea3.dll can they be in the "module" folder? if so, copy all the files that are in the "module" folder and paste them in the "content" folder Yup, found them there, just as you said! However...now when I run gamestart-28.bat, I get an avs-config.xml: Error opening config file.
Chloe Posté(e) le 25 décembre 2021 Posté(e) le 25 décembre 2021 Spi,64 does not start an error message like an image.Also, spi,cg does not start anything without errors. I haven't been able to save log files, so I can't see the details.Does anyone know this alone? Help me
Omar2 Posté(e) le 30 décembre 2021 Auteur Posté(e) le 30 décembre 2021 On 12/25/2021 at 4:27 PM, Chloe said: Spi,64 does not start an error message like an image.Also, spi,cg does not start anything without errors. I haven't been able to save log files, so I can't see the details.Does anyone know this alone? Help me e Send the log.txt
Chloe Posté(e) le 30 décembre 2021 Posté(e) le 30 décembre 2021 Il y a 9 heures, Omar2 a dit : Send the log.txt Log crashes before creating, log.txt. Other PCs will start, but this PC cannot be activated.
Omar2 Posté(e) le 30 décembre 2021 Auteur Posté(e) le 30 décembre 2021 5 hours ago, Chloe said: Log crashes before creating, log.txt. Other PCs will start, but this PC cannot be activated. first return spicecfg.exe to default settings. then start asphyxia.exe it will open a site in the site apply sittings ( press the blue button ) then start spice64.exe if that did not work then you are missing a runtime downloads from here Downlod
Chloe Posté(e) le 31 décembre 2021 Posté(e) le 31 décembre 2021 18 hours ago, Omar2 said: first return spicecfg.exe to default settings. then start asphyxia.exe it will open a site in the site apply sittings ( press the blue button ) then start spice64.exe if that did not work then you are missing a runtime downloads from here Downlod Spicecg. Exe does not start crashing. Asphiyxia. After launching exe,. Exe will crash even if you start exe. URL is not working.
Omar2 Posté(e) le 2 janvier 2022 Auteur Posté(e) le 2 janvier 2022 On 12/31/2021 at 6:36 PM, Chloe said: Spicecg. Exe does not start crashing. Asphiyxia. After launching exe,. Exe will crash even if you start exe. URL is not working. @Chloe your sound must be 16 bit 44100Hz CD Quality right click on the sound icon ( bottom right on your windows screen) click sound . then right click on your sound device . click properties then Advanced then choose *16 bit,44100Hz (CD Quality)*
Chloe Posté(e) le 3 janvier 2022 Posté(e) le 3 janvier 2022 On 2022/1/2 at 午後12時12分, Omar2 said: @クロエ サウンドは16ビット44100HzCD品質である必要があります サウンドアイコン(Windows画面の右下)を右クリックして、[サウンド]をクリックします。次に、サウンドデバイスを右クリックします。その後、選択した拡張[プロパティ]をクリックします* 16ビット、44100Hz(CD品質) * After downloading and redownloading the folder, I tried it, but couldn't. This is not the reason why the sound property is set from the original.
Omar2 Posté(e) le 3 janvier 2022 Auteur Posté(e) le 3 janvier 2022 8 hours ago, Chloe said: After downloading and redownloading the folder, I tried it, but couldn't. This is not the reason why the sound property is set from the original. then there's something wrong with your PC
midnightclubx Posté(e) le 5 janvier 2022 Posté(e) le 5 janvier 2022 (modifié) I just got a new PC and 144 hz monitor for Christmas, and I'm also suffering from desync issues (Specifically, the sync drifts; it starts off normal, but around the midpoint, the backing music starts to desync). I've set the preferred refresh rate to application-controlled in the Nvidia control panel (both global and program-specific for spice64), but it doesn't seem to do anything. I'm not able to lower the refresh rate on my monitor, so is there any other way to run the program at 120Hz, so it will stay in sync? The game runs perfectly fine, aside from the desync. Modifié le 5 janvier 2022 par midnightclubx
ZX3000GT1 Posté(e) le 5 janvier 2022 Posté(e) le 5 janvier 2022 2 hours ago, midnightclubx said: I just got a new PC and 144 hz monitor for Christmas, and I'm also suffering from desync issues (Specifically, the sync drifts; it starts off normal, but around the midpoint, the backing music starts to desync). I've set the preferred refresh rate to application-controlled in the Nvidia control panel (both global and program-specific for spice64), but it doesn't seem to do anything. I'm not able to lower the refresh rate on my monitor, so is there any other way to run the program at 120Hz, so it will stay in sync? The game runs perfectly fine, aside from the desync. You can reduce your screen refresh rate actually - I personally use Custom Resolution Utility (https://www.monitortests.com/forum/Thread-Custom-Resolution-Utility-CRU). Simply create a resolution with your preferred refresh rate (so if your screen is running at 1920x1080 144Hz, add another resolution option - same resolution, but different refresh rate). This is mine for example Just click add, then change the refresh rate to your preferred option (no need to change anything else) Click OK, then restart your PC. You can then change it in Windows Settings 1
midnightclubx Posté(e) le 5 janvier 2022 Posté(e) le 5 janvier 2022 (modifié) I found the cause of not finding other refresh rates: I had to switch perform scaling back to display instead of the GPU (I switched it to GPU because I was having flashing issues that I later found out were caused by having the HDR be on, so I switched that off). Now the game is a lot more in sync... for the most part; I'll still have a bit of desync towards the end of some songs, now that the monitor is at 120hz, but it's still an improvement! Update: I think I might've fixed it by turning off G-sync. >> Modifié le 5 janvier 2022 par midnightclubx
NeoMegaX Posté(e) le 6 janvier 2022 Posté(e) le 6 janvier 2022 Any guides on starting the game with Bemanitools instead of Spice?
midnightclubx Posté(e) le 6 janvier 2022 Posté(e) le 6 janvier 2022 (modifié) I've browsed through the forum and read there's a newer version of Omnimix, but I don't exactly know where to go for that (Apparently there were newer versions on a 4Chan thread, but the links expired in late October); I have the one from Nyaa installed, but a good chunk of the older songs seem to sync drift, so I'm wondering if the newer version might've fixed that problem (if anyone has it, anyway). Modifié le 6 janvier 2022 par midnightclubx
piotr25691 Posté(e) le 6 janvier 2022 Posté(e) le 6 janvier 2022 4 hours ago, midnightclubx said: I've browsed through the forum and read there's a newer version of Omnimix, but I don't exactly know where to go for that (Apparently there were newer versions on a 4Chan thread, but the links expired in late October); I have the one from Nyaa installed, but a good chunk of the older songs seem to sync drift, so I'm wondering if the newer version might've fixed that problem (if anyone has it, anyway). the sync drift is probably because the game stuttered for a short while making the song go out of sync that then isnt an omnimix issue but something with your pc that makes those short stutters
Lesteph25 Posté(e) le 6 janvier 2022 Posté(e) le 6 janvier 2022 Il y a 18 heures, NeoMegaX a dit : Any guides on starting the game with Bemanitools instead of Spice? put the files from the archive in the content folder configure your controller with config.bat start the game with gamestart-28.bat (modify if necessary the ea3-config.xml of the prop folder)
midnightclubx Posté(e) le 7 janvier 2022 Posté(e) le 7 janvier 2022 (modifié) 9 hours ago, piotr25691 said: the sync drift is probably because the game stuttered for a short while making the song go out of sync that then isnt an omnimix issue but something with your pc that makes those short stutters That's the thing; the non-omnimix songs played fine, and the newer omnimix songs that were more recently removed from vanilla IIDX seemed to stay in sync. I just played the program again, and now they play fine. Maybe the program needed to acclimate, or maybe I somehow had too many programs open, last night? Modifié le 7 janvier 2022 par midnightclubx
NeoMegaX Posté(e) le 10 janvier 2022 Posté(e) le 10 janvier 2022 On 1/6/2022 at 1:40 PM, Lesteph25 said: put the files from the archive in the content folder configure your controller with config.bat start the game with gamestart-28.bat (modify if necessary the ea3-config.xml of the prop folder) What is "the archive?"
aslkjfdakdlsfj Posté(e) le 10 janvier 2022 Posté(e) le 10 janvier 2022 (modifié) can anyone help me? I have 2 problems. my bistrover monitor definition became SD type suddenly after I put any buttons in keyboard. and i have network problem. I launched asphyxia-core and spice64.exe but network is offline.. here is my log.txt and screenshot (Edit: my new log.txt uploaded. please solve this problem ) (edit2): I upgraded from 0830 to 0915. but my network problem is same... log.txt Modifié le 13 janvier 2022 par aslkjfdakdlsfj
limitlessinterger Posté(e) le 10 janvier 2022 Posté(e) le 10 janvier 2022 (modifié) hi, i'm trying to get the game setup for me and my friend, and both of our games crash and doesn't pass the first loading screen for my friend, he can go thru the checking phase, everything passes except for network, after he tries test mode, the game instantly crashes, for me the game crashes after 2-5 seconds of waiting. both of our folders are in read-only mode and we cannot make it not be in read-only mode the game was working fine for me at the time but suddenly it decided to stop working edit: found the solution, i had to upgrade to 0915 Modifié le 10 janvier 2022 par limitlessinterger
Max Panda Posté(e) le 14 janvier 2022 Posté(e) le 14 janvier 2022 Had just a quick question regarding one of the options on the BemaniPatcher site for IIDX - What does the option "Cursor Lock" actually do in the game? :
Lucian045 Posté(e) le 15 janvier 2022 Posté(e) le 15 janvier 2022 On 1/14/2022 at 1:23 AM, Max Panda said: Had just a quick question regarding one of the options on the BemaniPatcher site for IIDX - What does the option "Cursor Lock" actually do in the game? : It means that after you finish the song you were on, the selection screen will still be at that song instead of the beginning of the style. You should have it checked so you don't have to navigate too much for songs.
a_maimai Posté(e) le 16 janvier 2022 Posté(e) le 16 janvier 2022 Nice to meet you, I have a question. The other day I got the iidx io board, the upper speaker part (with neon and spotlight) and various wiring, how can I make it usable with spicetool? Please tell me who knows.
nearnoah_573 Posté(e) le 16 janvier 2022 Posté(e) le 16 janvier 2022 (modifié) Got TDJ and secondary monitor working but the game minimizes when I touch the screen. Any help would be much appreciated. Thank you. <Update> Just found a workaround by running the game in windowed mode with 1280*720 resolution. But is there an elegant solution that works in fullscreen mode? After all, the touchscreen works perfectly in SDVX EG. Modifié le 16 janvier 2022 par nearnoah_573
Lesteph25 Posté(e) le 16 janvier 2022 Posté(e) le 16 janvier 2022 Il y a 3 heures, a_maimai a dit : Nice to meet you, I have a question. The other day I got the iidx io board, the upper speaker part (with neon and spotlight) and various wiring, how can I make it usable with spicetool? Please tell me who knows. spicetools... i don't know but with bemanitools, it should be possible there is a line in the btools file iidxhook-28.conf that reads "# Disable BIO2 emulation and enable usage of real BIO2 hardware io.disable_bio2_emu=false" I don't know if this is enough
aslkjfdakdlsfj Posté(e) le 17 janvier 2022 Posté(e) le 17 janvier 2022 (modifié) I don't have asphyxia-core iidx plugin v2.0.0 so do anyone know where to download it? EDIT1: I could solve all problems except network error. I get asphyxia-core plugin v2.0.0 supported iidx 28 Bistrover. when I check network option in system and I found E-amusement is on but network is offline. can someone solve this problem? and can you recommend me other private server? have a nice day! :D Modifié le 18 janvier 2022 par aslkjfdakdlsfj
loveddr79 Posté(e) le 18 janvier 2022 Posté(e) le 18 janvier 2022 On 2022/1/17 at 12:23 AM, nearnoah_573 said: Got TDJ and secondary monitor working but the game minimizes when I touch the screen. Any help would be much appreciated. Thank you. <Update> Just found a workaround by running the game in windowed mode with 1280*720 resolution. But is there an elegant solution that works in fullscreen mode? After all, the touchscreen works perfectly in SDVX EG. try set the moniter 720p@120hz before run the game.then you can touch the password
feeeelix Posté(e) le 18 janvier 2022 Posté(e) le 18 janvier 2022 (modifié) Hello there, I'm running into a small problem where i'd start the game and it'll start up and it'll be a blackscreen for a second then closes/crashes itself anyway to fix this? It's also a problem i have with SDVX EG as well... hope there's a solution for this Modifié le 18 janvier 2022 par feeeelix
nearnoah_573 Posté(e) le 18 janvier 2022 Posté(e) le 18 janvier 2022 Il y a 13 heures, loveddr79 a dit : try set the moniter 720p@120hz before run the game.then you can touch the password Thanks a ton! Finally makes fullscreen touch work by setting 1280x720 resolution. Frequency doesn't matter.
yip10101 Posté(e) le 18 janvier 2022 Posté(e) le 18 janvier 2022 I have a problem,i got my TDJ only have 60FPS,have anyone got this problem?
Messages recommandés
Créer un compte ou se connecter pour commenter
Vous devez être membre afin de pouvoir déposer un commentaire
Créer un compte
Créez un compte sur notre communauté. C’est facile !
Créer un nouveau compteSe connecter
Vous avez déjà un compte ? Connectez-vous ici.
Connectez-vous maintenant