[Arcade PC] Time Crisis 5 (Namco System ES3)

[Invité R.R.Z.]

If we get every weekend 2 games on this caliber we’ll cover everything in very short time😀 oh man if only terminator salvation was playable like that

[Invité R.R.Z.]

1 minute ago, slashguns04 said:

This error?

Use the start file to run the game

[Invité Bootleg]

with directinput.ini Is it possible to switch the left and right buttons and the coin button or even set to free play?.. I know that  Shift "H" does cross hairs makes the game so much more fun! lol 

[Invité kimsama]

22 minutes ago, NoKey said:

Do I get a chance to connect these pistols to the PC and play ?

Is there anyone who has tried ?

 

I tried, it doesn't work. I hope I would get it working one day

[Invité Bootleg]

11 minutes ago, nohero said:

 

Same for my xbox360 gamepad but thanks to JoyToKey I lowered the sensitivity.

 

CHEERs

can u provide instructions please =) 

[nohero]

1 minuto fa, Bootleg ha scritto:

can u provide instructions please =) 

 

It's easy with JoyToKey and a gamepad.

When you set Left stick for mouse movement you can lower  and higher the sensitivity.

That's it 

 

CHEERs

[Invité kimsama]

15 minutes ago, punkdark2000 said:

I tested with Aimtrack, on the selection screen it works normal, but inside the game it is very sensitive and it is impossible to aim.

Check this shit out!
https://drive.google.com/file/d/12tHHt2UNttwSmx2JXJct1t_w0fHLAus7/view?usp=sharing

[Invité Bootleg]

1 minute ago, nohero said:

 

It's easy with JoyToKey and a gamepad.

When you set Left stick for mouse movement you can lower  and higher the sensitivity.

That's it 

 

CHEERs

thank u

[slashguns04]

5 minuti fa, R.R.Z. ha scritto:

Use the start file to run the game

i used this .bat file to boot but it gives me this error

[Invité R.R.Z.]

3 minutes ago, slashguns04 said:

i used this .bat file to boot but it gives me this error

If it unzipped without error it should work but try downloading it again maybe there’s a file missing 

[nohero]

@slashguns04,

 

maybe your HW is not compatible or you need DirectX and Visual C++.

 

CHEERs

[NoKey]

11 minutes ago, kimsama said:

I tried, it doesn't work. I hope I would get it working one day

I have also GunCon2 gun. I will try.

 

Thank u.

[Invité kimsama]

Just now, NoKey said:

I have also GunCon2 gun. I will try.

 

Thank u.

Good luck testing a CRT light gun on a LCD monitor

[slashguns04]

3 minuti fa, nohero ha scritto:

@slashguns04,

 

maybe your HW is not compatible or you need DirectX and Visual C++.

 

CHEERs

Intel I5 - GeForce 1070

 

[nohero]

Ok, re-download the whole thing and give it another try.

 

 

CHEERs

[oroborus77]

Simply amazing !

Thank you truly.

[Invité kimsama]

1 minute ago, slashguns04 said:

Intel I5 - GeForce 1070

 

Make sure you have the latest DirectX and Visual C++

[MrThunderwing]

@kimsama You absolute ruddy legend, thanks so much for this!

[Invité williecoiote]

I bought this top shot elite (ps3) to initially modify it with the aimtrak components, but ended up giving up.  I tested it here on the PC. The controls and buttons are recognized, but there is no way to play it because the crosshair does not appear on the screen.
I've been looking for something about how to make it work on the PC, but I didn't find anything at the moment...

[ViRuS-MaN]

quelqu un peu me dire comment configurer mon joystick xbox 360 et la souris sur ce jeux ??? merci , je suis en train de l uploader sur mon site et apres je mettrais aussi kofxiv bien sur

[NoKey]

 

[nohero]

Il 28/8/2020 Alle 17:01, ViRuS-MaN ha scritto:

quelqu un peu me dire comment configurer mon joystick xbox 360 et la souris sur ce jeux ??? merci , je suis en train de l uploader sur mon site et apres je mettrais aussi kofxiv bien sur

 

It's already configured for mouse, keyboard and xbox gamepad.

You need all 3  to play it. Mouse for aiming and shooting ( left click ), xbox gamepad for changing weapon and left and right pedal ( reload ) and keyboard for insert coin and active crosshair ( Shift+T, Shift+H ).

 

If you use a front-end like LB, you can do much more and with JoyToKey you can set all controls to the xbox gamepad like I did.

 

CHEERs

Modifié le 30 août 2020 par nohero

[strider973]

THANK YOU MAN , im gonna try with 2 aimtrack

 

Modifié le 28 août 2020 par strider973

[Invité kimsama]

21 minutes ago, NoKey said:

 

The video is marked made for kids

[arcade_power]

19 minutes ago, nohero said:

 

It's already configured for mouse, keyboard and xbox gamepad.

You need all 3  to play it. Mouse for aiming and shooting ( left click ), xbox gamepad for changing weapon and left and right pedal ( reload ) and keyboard for insert coin and active crosshair ( Shift+T, Shift+H ).

 

If you use a front-end like LB, you can do much more and with JoyToKey you casn set all controls to the xbox gamepad like I did.

 

CHEERs

I'm currently trying to make the aiming work within the game using Joy2Key, but when I move the left analog stick with my xbox 360 controller, notjhing happens. Only mouse movement works. Can you please post a pic of your Joy2key settings? thanks in advance!

[nohero]

20 minuti fa, arcade_power ha scritto:

I'm currently trying to make the aiming work within the game using Joy2Key, but when I move the left analog stick with my xbox 360 controller, notjhing happens. Only mouse movement works. Can you please post a pic of your Joy2key settings? thanks in advance!

 

I set it in this way :

 

Left Trigger = Mouse Left Click

Left Stick = Mouse movement

Left Thumb Stick = Left Shift ( keyboard )

Right Stick UP = T ( keyboard )

Right Stick DOWN = H ( keyboard )

 

You need to set it like above because most of the xbox gamepad buttons are already configurated and you can't change them.

 

 

Buttons already configurated : 

 

Right Trigger = Shoot

A ( green ) = Change weapon

LB = Left Pedal

RB = Right Pedal

 

 

TIPS :

 

When you are on Left Pedal ( LB on gamepad ) shoot with Right Trigger.

When you are on Right Pedal ( RB on gamepad ), shoot with Left Trigger.

 

I like in this way

 

 

 

CHEERs

Modifié le 28 août 2020 par nohero

[Swissychief]

HOLY SHIT! Thank you SOOOO much for this! I love the Time Crisis series, and I NEVER thought I'd be able to play any of the newer ones. Gonna have to get my Aimtraks from storage (as we're moving soon) to try this out!

[arcade_power]

33 minutes ago, nohero said:

 

I set it in this way :

 

Left Trigger = Mouse Left Click

Left Stick = Mouse movement

Left Thumb Stick = Left Shift ( keyboard )

Right Stick UP = T ( keyboard )

Right Stick DOWN = H ( keyboard )

 

You need to set it like above because most of the xbox gamepad buttons are already configurated and you can't change them.

 

 

Buttons already configurated : 

 

Right Trigger = Shoot

A ( green ) = Change weapon

LB = Left Pedal

RB = Right Pedal

 

 

TIPS :

 

When you are on Left Pedal ( LB on gamepad ) shoot with Right Trigger.

When you are on Right Pedal ( RB on gamepad ), shoot with Left Trigger.

 

I like in this way

 

 

 

CHEERs

Thanks for helping out! But I did set my left analog stick to use the mouse like you can see in the pic, still it won't work in-game. Perhaps I did it wrong?

 

[nohero]

Adesso, arcade_power ha scritto:

Thanks for helping out! But I did set my left analog stick to use the mouse like you can see in the pic, still it won't work in-game. Perhaps I did it wrong?

 

 

Yes, it's wrong because the values are "0"

Double click 1 per time and set the value from 80 to 100 ( according to your liking ).

 

CHEERs

[arcade_power]

5 minutes ago, nohero said:

 

Yes, it's wrong because the values are "0"

Double click 1 per time and set the value from 80 to 100 ( according to your liking ).

 

CHEERs

Ok, I double clicked and this screen comes up and I don't know where to set the values from 80 or 100 etc. 

 

[nohero]

See this pic  :

 

[arcade_power]

5 minutes ago, nohero said:

See this pic  :

 

Thanks! Now it works! Much appreciated!! 

[bdiederichs]

If you save this an an AHK you can use the ESC key to exit clean:
Just be sure to put in the path to where you extracted the Time Crisis 5 folder where I've specified

run, "<INSERT PATH TO TIME CRISIS 5 FOLDER HERE>\Time Crisis 5\TC5\Binaries\Win64\TimeCrisisGame-Win64-Shipping.exe" -NOINI -Language=JPN -playside=1
Escape::
    Process,Close,TimeCrisisGame-Win64-Shipping.exe
    Run,taskkill /im "TimeCrisisGame-Win64-Shipping.exe" /F
    ExitApp
return

[pablitox70]

I hope we can use aimtrack very small

[llll55]

il y a 39 minutes, arcade_power a dit :

Thanks! Now it works! Much appreciated!! 

Hi, 

did you put is on 100 speed for each  mouse setting?

i just tried it with a dolphin bar but the cursor just move all over the place

[Rex2573]

3 ore fa, nohero ha scritto:

 

It's only possible if you use JoyToKey or a similar software. I did it in that way 

 

CHEERs

thanks a lot but i am not able to uise it..i hope somene post a preconfigured fiòe with also ESC button by my xbox pad

[bdiederichs]

5 hours ago, punkdark2000 said:

 

Now we need Argon together with its demulshooter, with the mouse it works well but with aimtrack it is very sensitive and impossible to play.

Yeah it's all over the place

but I did get left and right cover mapped to the left and right side buttons on the Aimtrak by adding these two lines in my AHK script

MButton::y
RButton::t