[Arcade PC] Time Crisis 5 (Namco System ES3)

[Rex2573]

Forgive me.

May someone help me to play this game with my xboxpad? I don t reach to play It with jconfiguration...of possibile someone post a preconfigured file with combination of jconf and jtokey please..thanks a lot

 

Modifié le 11 novembre 2021 par Rex2573

[Invité kimsama]

On 2021/11/12 at 5:45 AM, Rex2573 said:

Forgive me.

May someone help me to play this game with my xboxpad? I don t reach to play It with jconfiguration...of possibile someone post a preconfigured file with combination of jconf and jtokey please..thanks a lot

 

Use Steam to run the game, it can let you use a controller

[Rex2573]

1 ora fa, kimsama ha scritto:

Use Steam to run the game, it can let you use a controller

Excuse me i dont understand

[sportecto1]

Hey People. I installed Demulshooter and all works. But the Crosshair in the game is not accurate. It goes sometimes to the left or right or i can‘t get at the bottom of the screen. Why we can not calibrate in game? I use a wiimote in mode 2 as gun.

[sportecto1]

Ok. Now it works fine. But why i can not put in my highscore after the game? After the game i can‘t enter my initials

Modifié le 17 novembre 2021 par sportecto1

[atrain9]

Hello , what is the best version of TC5 to use with Sinden Lightguns ?  Thanks 

[sportecto1]

Nobody knows why the Hinghscore page don‘t come after the game? It is only on my game?

[angelobodetti]

Hi all, I have no idea what my issue is but I have my Sinden working. Menu is accurate. Then inside the game it is not accurate. Other times the first few scenes of the game are accurate but as the game goes on all of the sudden my cross hairs are very far left or right. 
 

I’ve tried with Demul, without Demul. 
 

outside of the game the sinden is accurate. 
 

any advice? Am I missing something?

[Invité Onkel]

2 hours ago, angelobodetti said:

Am I missing something?

Run at original resolution 1366x768 or 1920x1080 60 Hz

Modifié le 20 novembre 2021 par Onkel

[sportecto1]

Nobody knows about the how enter the highscore initials?

[white-angel]

Thank you 🙏 so much 

[calle]

Le 2021-11-20 à 20:34, sportecto1 a dit :

Nobody knows about the how enter the highscore initials?

It works for me. Unless you use JConfig ’Save patch’ save data is stored directly on C: drive so make sure you have write permission. You are getting more than the 2 million which is entry for the high scores right? 😊

[Godverdomme]

nice job boys

[Invité Onkel]

20 minutes ago, Godverdomme said:

nice job boys

Don't curse !!!

[Sakurarozu]

ok im a bit lost on here. how i get this to run? what emu i need to use? im using coinops as my front end. i have two aimtrak guns and i would like to use it on this game, 

Modifié le 5 décembre 2021 par Sakurarozu

[Invité Onkel]

8 hours ago, Sakurarozu said:

ok im a bit lost on here. how i get this to run? what emu i need to use? im using coinops as my front end. i have two aimtrak guns and i would like to use it on this game, 

There are multiple options JConfig and Teknopartrot are loaders 

https://mega.nz/#!QIgwCQgA!z9XFzw42Rd9CzaoGzvsFCUeZpMfMIQWLTqTV5BIQlko

 

https://teknogods.github.io/compatibility.html

[Invité kimsama]

Gun + Dual Pedal config (GUN4IR is recommended to use):

https://drive.google.com/file/d/11E54CA4LJdnVnNWl0OJboPIdzWAiSI9Z/view?usp=sharing

Place the config in TC5\TimeCrisisGame\Config

Place the .bat file in your Demulshooter folder

Right mouse is weapon change, and middle mouse is add credits (no more Shift+T)

Pedal inputs are default so make sure your pedal inputs are set to T and Y

If the gun doesn't work, run DemulShooterX64.exe as admin

[jarlord]

[Rex2573]

17 ore fa, kimsama ha scritto:

Gun + Dual Pedal config (GUN4IR is recommended to use):

https://drive.google.com/file/d/11E54CA4LJdnVnNWl0OJboPIdzWAiSI9Z/view?usp=sharing

Place the config in TC5\TimeCrisisGame\Config

Place the .bat file in your Demulshooter folder

Right mouse is weapon change, and middle mouse is add credits (no more Shift+T)

Pedal inputs are default so make sure your pedal inputs are set to T and Y

If the gun doesn't work, run DemulShooterX64.exe as admin

forgive me if possible may you post a configured complete file that allow to meto play it with my xbox 360 pad...i would play it if possiblenot with mouse but with jconf and pad..thanks a lot

[Invité kimsama]

5 hours ago, Rex2573 said:

forgive me if possible may you post a configured complete file that allow to meto play it with my xbox 360 pad...i would play it if possiblenot with mouse but with jconf and pad..thanks a lot

Use the Steam controller overlay

[Rex2573]

4 ore fa, kimsama ha scritto:

Use the Steam controller overlay

Is it an application?

[Invité kimsama]

3 hours ago, Rex2573 said:

Is it an application?

You add Time Crisis 5 to your Steam library, right click on it and you'll see a controller config option, you just run the game within Steam

[Rex2573]

6 ore fa, kimsama ha scritto:

You add Time Crisis 5 to your Steam library, right click on it and you'll see a controller config option, you just run the game within Steam

So this is the only way to play with my pad it?

[pablitox70]

Someone with an aimtrack can share settings and buttons assignements ?

I'm trying to play using the two lateral gun buttons for left and right movement without success

Any help would be appreciated, thank you

[Rex2573]

excuse me with jconfiguration all buttons are ok for my pad xbox except for cross hair button...i cannot assign it in game...any idea please

[Hollame2]

Hi can anybody help with DemulShooter

im trying to setup sinden light gun for Time Crisis 5

not sure how to create a batch file 

 

Modifié le 3 janvier 2022 par Hollame2

[WildWolf]

il y a 2 minutes, Hollame2 a dit :

Hi can anybody help with DemulShooter

im trying to setup sinden light gun

not sure what I gave input for a batch file 

 

[Invité kimsama]

2 hours ago, Hollame2 said:

Hi can anybody help with DemulShooter

im trying to setup sinden light gun for Time Crisis 5

not sure how to create a batch file 

 

I already made a bat file. You just need to open the GUI and set Player 1 to the gun

https://drive.google.com/file/d/11E54CA4LJdnVnNWl0OJboPIdzWAiSI9Z/view?usp=sharing

[Rex2573]

7 ore fa, kimsama ha scritto:

I already made a bat file. You just need to open the GUI and set Player 1 to the gun

https://drive.google.com/file/d/11E54CA4LJdnVnNWl0OJboPIdzWAiSI9Z/view?usp=sharing

Forgive me is possible help to me too to use this game with jconfiguration and my pad? All buttons works for me except Cross Hair button

[Invité kimsama]

25 minutes ago, Rex2573 said:

Forgive me is possible help to me too to use this game with jconfiguration and my pad? All buttons works for me except Cross Hair button

Don't use the Jconfig because it's very uncomplete.

[Rex2573]

Adesso, kimsama ha scritto:

Don't use the Jconfig because it's very uncomplete.

OK my friend...jtokey instead?

[Invité kimsama]

1 minute ago, Rex2573 said:

OK my friend...jtokey instead?

Nothing! Run the bat files in TC5\Binaries\Win64

[Invité Victoria Skylight]

How can I display the Crosshair on Time Crisis 5 Game?

I can see the Target only, when I'm shooting.

[Invité R.R.Z.]

1 minute ago, Victoria Skylight said:

How can I display the Crosshair on Time Crisis 5 Game?

I can see the Target only, when I'm shooting.

Shift+h

[Invité Victoria Skylight]

vor 5 Minuten schrieb R.R.Z.:

Shift+h

Thanks Bro 👍

[Rex2573]

43 minuti fa, R.R.Z. ha scritto:

Shift+h

I try but without success...i must use launcher or shippingexe to play it my friend?

Modifié le 4 janvier 2022 par Rex2573

[Invité R.R.Z.]

7 minutes ago, Rex2573 said:

I try but without success...i must use launcher or shippingexe to play it my friend?

No my friend u can use it without a loader 

run start.bat