Aller au contenu

[Arcade PC] SDVX Vivid Wave


adonis495

Messages recommandés

  • Team

Charteuk.png

(Click to enlarge and Read ! or be banned until the end of your life !)

 

Topic is temporarily Locked. During this locking period, we give you the opportunity to know our rules. Read them well because we will be even more severe in the Future.
Sujet temporairement vérouillé. Pendant ce vérouillage de post, nous vous donnons l'opportunité de connaitre notre réglement.  Lisez  le bien parce que serons d'autant plus sévère par la suite.
 

You can read this in french and in english here, if you have a doubt :

Vous pouvez le lire en francais ou en anglais ici,  si vous avez un doute :

 

 

Modifié par WildWolf
Lien vers le commentaire
Partager sur d’autres sites

  • The sujet was locked
  • 2 semaines après...
  • Team

Je réouvre le sujet, merci de respecter le réglement, si ce n'est pas le cas, nous fermerons ce sujet.

 

I reopen the topic, thank you for respecting the rules, it this is not the case, we will close this topic.
 
Modifié par WildWolf
Lien vers le commentaire
Partager sur d’autres sites

  • The sujet was unlocked
Invité crystalrosess

I might be late to this forum but, i have exceed gear downloaded with asphixia server etc everything works until i get to the main menu screen, when i click on the button to scan my virtual e amusement pass, nothing happens 

Lien vers le commentaire
Partager sur d’autres sites

Invité crystalrosess
23 minutes ago, crystalrosess said:

I might be late to this forum but, i have exceed gear downloaded with asphixia server etc everything works until i get to the main menu screen, when i click on the button to scan my virtual e amusement pass, nothing happens 

More information:

- Changed spec_type in ea3 to F instead of H, non-valkyrie mode made it work but i want 120hz and valkyrie effect

- Sped up sound in non-valkyrie mode

Anyone got a fix for making the card scan work in valkyrie mode and not having sped up sound?

Lien vers le commentaire
Partager sur d’autres sites

29 minutes ago, crystalrosess said:

More information:

- Changed spec_type in ea3 to F instead of H, non-valkyrie mode made it work but i want 120hz and valkyrie effect

- Sped up sound in non-valkyrie mode

Anyone got a fix for making the card scan work in valkyrie mode and not having sped up sound?

 I am having the exact same problem. I am running 2021110200, which used to be running perfectly. I haven't been playing it for a while. When I tried to run it today, e-amu card and insert coin button both were not working. 

Here's more info on my end: changed spec type H to G, valkyrie laser effects are not displayed correctly. The main screen/L2D is 120fps, but the gameplay seems to be 60fps (the ingame fps counter says 120fps). I am not experiencing any sound problem though. 

Lien vers le commentaire
Partager sur d’autres sites

I recently changed my monitor to a 144hz type that has a delay of 1ms. I patched soundvoltex.dll to make the game run at 120fps, but now I feel like there is a delay between my input and the game at around 60ms. Anyone have the same problem and know how to fix it? At this point I'm always getting late

Lien vers le commentaire
Partager sur d’autres sites

On 2/21/2022 at 1:43 PM, lincbky said:

 I am having the exact same problem. I am running 2021110200, which used to be running perfectly. I haven't been playing it for a while. When I tried to run it today, e-amu card and insert coin button both were not working. 

Here's more info on my end: changed spec type H to G, valkyrie laser effects are not displayed correctly. The main screen/L2D is 120fps, but the gameplay seems to be 60fps (the ingame fps counter says 120fps). I am not experiencing any sound problem though. 

Hi, i'm having this exact same problem with the card scan-in. I've had the game running perfectly for months, when today it suddenly doesn't want to scan the card.

I don't get any of the sound or fps issues, running valk mode on a single 120hz monitor etc and I have not changed any of the games files at all recently. I've checked the log files and while it does come up with the line about the card swipe and shows the e-amuse number, the game does nothing. No loading screens or errors, just nothing until it goes into demo mode.

I assumed it might be network related and tried: 

  • updating and rolling back asphyxia
  • same, but with spicetools
  • changing settings in asphyxia
  • generating new card numbers/making different card0.txt files

and got no luck. So at this point i'm at a loss, but i'm still assuming that its either asphyxia or spicetools somehow...

Can give more info if needed about specs and stuff.

If anyone figures it out, do share! Thanks!

Lien vers le commentaire
Partager sur d’autres sites

On 2/22/2022 at 1:33 PM, nivalis said:

Hi, i'm having this exact same problem with the card scan-in. I've had the game running perfectly for months, when today it suddenly doesn't want to scan the card.

I don't get any of the sound or fps issues, running valk mode on a single 120hz monitor etc and I have not changed any of the games files at all recently. I've checked the log files and while it does come up with the line about the card swipe and shows the e-amuse number, the game does nothing. No loading screens or errors, just nothing until it goes into demo mode.

I assumed it might be network related and tried: 

  • updating and rolling back asphyxia
  • same, but with spicetools
  • changing settings in asphyxia
  • generating new card numbers/making different card0.txt files

and got no luck. So at this point i'm at a loss, but i'm still assuming that its either asphyxia or spicetools somehow...

Can give more info if needed about specs and stuff.

If anyone figures it out, do share! Thanks!

 Recently I encounter the same issue and I change the system date to 2021 June, it works fine now

Lien vers le commentaire
Partager sur d’autres sites

On 2/22/2022 at 1:33 PM, nivalis said:

Hi, i'm having this exact same problem with the card scan-in. I've had the game running perfectly for months, when today it suddenly doesn't want to scan the card.

I don't get any of the sound or fps issues, running valk mode on a single 120hz monitor etc and I have not changed any of the games files at all recently. I've checked the log files and while it does come up with the line about the card swipe and shows the e-amuse number, the game does nothing. No loading screens or errors, just nothing until it goes into demo mode.

I assumed it might be network related and tried: 

  • updating and rolling back asphyxia
  • same, but with spicetools
  • changing settings in asphyxia
  • generating new card numbers/making different card0.txt files

and got no luck. So at this point i'm at a loss, but i'm still assuming that its either asphyxia or spicetools somehow...

Can give more info if needed about specs and stuff.

If anyone figures it out, do share! Thanks!

Someone told me it's a problem like y2k. You can set the time before 1st Feb, or change "spec __type" to either G for Valkyrie mode or F (I didn't test with this one) in ea3-config. Just DON'T use H here. This works for me. 

Modifié par void_0v0
Lien vers le commentaire
Partager sur d’autres sites

hey. I have a secondary PC with an nvidia graphics card and an intel cpu, and Exceed gear works just fine. I would like to try and play EG on my main pc which has an AMD gpu and an AMD cpu. I have seen references to patches for the game which can make playing sound voltex exceed gear possible on amd gpu systems. Does anyone know how to do this? I would greatly appreciate any help, i have looked through this topic and thread but i just cant find a full way to do it. The game does not boot at all and gets errored on the spice64 command line when i try to play on my AMD system, but with the exact same files, version KFC-2021083100, the game boots just fine on my nvidia and intel system.

  1. KFC-2021083
Lien vers le commentaire
Partager sur d’autres sites

1 hour ago, poodoggyfartfart said:

hey. I have a secondary PC with an nvidia graphics card and an intel cpu, and Exceed gear works just fine. I would like to try and play EG on my main pc which has an AMD gpu and an AMD cpu. I have seen references to patches for the game which can make playing sound voltex exceed gear possible on amd gpu systems. Does anyone know how to do this? I would greatly appreciate any help, i have looked through this topic and thread but i just cant find a full way to do it. The game does not boot at all and gets errored on the spice64 command line when i try to play on my AMD system, but with the exact same files, version KFC-2021083100, the game boots just fine on my nvidia and intel system.

  1. KFC-2021083

You have to go throughout the previous pages, this problem has been already mentioned before 😉

Lien vers le commentaire
Partager sur d’autres sites

31 minutes ago, kanon said:

You have to go throughout the previous pages, this problem has been already mentioned before 😉

I have downloaded d3d9.dll, tried forest64.exe and forestcfg.exe instead of spice64 and spicecfg and it is still not working, what other other solutions have been mentioned? I have looked through this thread beforehand, but maybe i am missing something, sorry for any inconvienience

Lien vers le commentaire
Partager sur d’autres sites

Hi, i'm new with this game. Is anyone here know how to setup the sub-screen for Valkryie mode of Exceed gear? I have 2 screen, 144hz and 60hz, the game run and have sound but both screen was black out. Is it necessary that both monitor must be more than 120hz?

Lien vers le commentaire
Partager sur d’autres sites

1 hour ago, hope100love said:

Hi, i'm new with this game. Is anyone here know how to setup the sub-screen for Valkryie mode of Exceed gear? I have 2 screen, 144hz and 60hz, the game run and have sound but both screen was black out. Is it necessary that both monitor must be more than 120hz?

The game is on my 120hz screen and the subscreen on my 75hz screen 🙂

 

Lien vers le commentaire
Partager sur d’autres sites

3 hours ago, kanon said:

The game is on my 120hz screen and the subscreen on my 75hz screen 🙂

 

So about the black screen error, is there any solution? Because if only playing on the main screen (144hz or down to 120hz) it's still fine.
I'm playing KFC-2021083100

My setup is: main monitor 2k 144hz, sub monitor fhd 60hz.

If i run game in windows mode, it close after 2~3 sec. In fullscreen mode, the game run and have audio but both screen are black. Can anyone guide me please?

Capture220303_1.JPG

Modifié par hope100love
Add picture
Lien vers le commentaire
Partager sur d’autres sites

11 hours ago, hope100love said:

So about the black screen error, is there any solution? Because if only playing on the main screen (144hz or down to 120hz) it's still fine.
I'm playing KFC-2021083100

My setup is: main monitor 2k 144hz, sub monitor fhd 60hz.

If i run game in windows mode, it close after 2~3 sec. In fullscreen mode, the game run and have audio but both screen are black. Can anyone guide me please?

I have same problem,my solution is start the game on a single screen,after successfully opening the game, switch back to dual screen.

 

The game must be single screen when starting the game in VALK mode (if your "prop" file setting change to "G" or "H",not "F") 

If you use two or three screens at the same time, it will not turn on .


I do not know why either


I have seen that other people can show sub monitor. But I don't know how

Lien vers le commentaire
Partager sur d’autres sites

On 12/26/2021 at 12:34 PM, ArviFox said:

whenever i start i get this its telling me to calibrate my audio and i genuinely have no idea how to do this please help thanks in advance image.png.32cc05b43d2af5b04363ac7bcc833be4.png

i'm experiencing the same problem too, has anyone found a fix for this yet? 

Lien vers le commentaire
Partager sur d’autres sites

19 hours ago, xib114 said:

i'm experiencing the same problem too, has anyone found a fix for this yet? 

you need to calibrate the vol in the test menu

 

Lien vers le commentaire
Partager sur d’autres sites

 

I've been having a few issues with my EG. I'm running the 1020 update and I get choppy audio randomly. It could be as soon as I get to the konami screen or after a song, mid song, you get the idea. I have it set to 44100hz audio, 16 bit. I'm using speakers with an audio jack hooked up to a usb that gives me this output. I'm not really sure what's causing it. Another issue is some songs that I've tried to play immediately drop frames. This has happened in both valk and non valk modes, any of these things happen to you guys? 

On 3/5/2022 at 9:15 AM, xib114 said:

i'm experiencing the same problem too, has anyone found a fix for this yet? 

It says volume in the message but it actually means the knobs need to be calibrated. The game refers the knobs as "VOL-L and VOL-R". 

Modifié par Faq_U
Lien vers le commentaire
Partager sur d’autres sites

10 hours ago, Faq_U said:

 

I've been having a few issues with my EG. I'm running the 1020 update and I get choppy audio randomly. It could be as soon as I get to the konami screen or after a song, mid song, you get the idea. I have it set to 44100hz audio, 16 bit. I'm using speakers with an audio jack hooked up to a usb that gives me this output. I'm not really sure what's causing it. Another issue is some songs that I've tried to play immediately drop frames. This has happened in both valk and non valk modes, any of these things happen to you guys? 

It says volume in the message but it actually means the knobs need to be calibrated. The game refers the knobs as "VOL-L and VOL-R". 

after pressing test the screen went black, im guessing that it was actually black text which is caused by graphics error, turns out it was just me forgetting to put d3d9.dll in the game folder. Btw may i have the link to the update patch, i tried pasting the one downloaded from uptobox link on to the 0831 version but in game it still shows as 0831 and not the new version.

plus i noticed that the game won't save my scores and the volforce just resets everytime i log in, only the pcb remained in my account, has someone fixed this issue before?

Lien vers le commentaire
Partager sur d’autres sites

Anyone try audio capture with OBS in KFC-2021083100 yet? I got problem with that. 
- I already patch with shared mode WASAPI.
- set audio 44100hz.
- Already try OBS's application Audio Output, Audio Output Capture, Audio Input Capture,... still no audio on OBS while game
- Already try the way show in this video: 

 and still have problem
And I've try same setup with KFC-008-2020122200 and have no issue. I dont know what the error is and how to fix it. ㅠㅠ

Capture220307.JPG

Lien vers le commentaire
Partager sur d’autres sites

6 hours ago, xib114 said:

after pressing test the screen went black, im guessing that it was actually black text which is caused by graphics error, turns out it was just me forgetting to put d3d9.dll in the game folder. Btw may i have the link to the update patch, i tried pasting the one downloaded from uptobox link on to the 0831 version but in game it still shows as 0831 and not the new version.

plus i noticed that the game won't save my scores and the volforce just resets everytime i log in, only the pcb remained in my account, has someone fixed this issue before?

Just change the date in the ea3-config and the asphyxia plugin should have toggles for unlocking all songs and crew. This includes the songs in the 1020. 

The plugin I'm using to save scores is the 6.70 version that I got from nyaa. It should have the right asphyxia version as well. Make sure your not using -ea and that you open the server before launching the game. 

Modifié par Faq_U
Lien vers le commentaire
Partager sur d’autres sites

11 hours ago, Faq_U said:

Just change the date in the ea3-config and the asphyxia plugin should have toggles for unlocking all songs and crew. This includes the songs in the 1020. 

The plugin I'm using to save scores is the 6.70 version that I got from nyaa. It should have the right asphyxia version as well. Make sure your not using -ea and that you open the server before launching the game. 

alright got it working after all that fix.

one more thing though, my game just randomly fluctuates from 1080p to 720p every now and then, is there anyway to keep it permanently at 1080? might be due to amd softwares but im no genius

 

thanks a lot!

Lien vers le commentaire
Partager sur d’autres sites

On 2022/3/7 at PM10点04分, hope100love said:

有人在 KFC-2021083100 中尝试使用 OBS 进行音频捕获吗?我有问题。 
- 我已经用共享模式 WASAPI 打了补丁。
- 设置音频 44100hz。
- 已经尝试过 OBS 的应用程序音频输出、音频输出捕获、音频输入捕获……在游戏时 OBS 上仍然没有音频
- 已经尝试了此视频中显示的方式: 

 仍然有问题
我已经尝试使用 KFC-008-2020122200 进行相同的设置并且没有问题。我不知道错误是什么以及如何解决它。ㅠㅠ

捕获220307.JPG

maybe windows sound setting 

Lien vers le commentaire
Partager sur d’autres sites

11 hours ago, GhostR said:

maybe windows sound setting 

But the strange things here is I can still play and capture the old version. So the windows sound may not be the problem, i guess? Still have no idea. I already try re-install audio driver. No hope *for now.

Lien vers le commentaire
Partager sur d’autres sites

20 hours ago, kamin said:

Can you tell me a little more about it?  The text may be strange because I am using a translation tool.😥

Release v1.40d · asphyxia-core/asphyxia-core.github.io · GitHub download the latest Asphyxia server here, make sure to use the core version.

https://drive.google.com/drive/folders/1pqK4IsqZFoehrePsTb-wacVQSoqBMRSJ?usp=sharing also download this, extract the file and paste it in the "plugins" folder in your content (SDVX folder), and it should look something like this:

image.png.264f75255a1069de5ba7b57cf0ebf18b.png

also make sure to open the server file (asphyxia-core-x64.exe) before opening spice64.exe/forestools64.exe depends on what you're using to launch the game

Lien vers le commentaire
Partager sur d’autres sites

Le 13/03/2022 à 23:38, xib114 a dit :

Release v1.40d · asphyxia-core/asphyxia-core.github.io · GitHub download the latest Asphyxia server here, make sure to use the core version.

https://drive.google.com/drive/folders/1pqK4IsqZFoehrePsTb-wacVQSoqBMRSJ?usp=sharing also download this, extract the file and paste it in the "plugins" folder in your content (SDVX folder), and it should look something like this:

image.png.264f75255a1069de5ba7b57cf0ebf18b.png

also make sure to open the server file (asphyxia-core-x64.exe) before opening spice64.exe/forestools64.exe depends on what you're using to launch the game

thank you🥰🥰
I tried it but it doesn't work
I also entered the service url etc.
Is there anything else I can do?😭

20220314_0.png

Lien vers le commentaire
Partager sur d’autres sites

8 hours ago, jsshh said:

Anyone know how to unlock a song and a crew? I use a translator so my words may be weird

when you opened the server there should be a browser tab opened.

there is a plugin called SDVX on the left bar, click on that and there should be options to enable crews and unlock songs.

also use BEMANI DLL Patching Tools (new-bemani-patcher.vercel.app) to patch your dll file to your preference.

Lien vers le commentaire
Partager sur d’autres sites

Veuillez vous connecter pour commenter

Vous pourrez laisser un commentaire après vous êtes connecté.



Connectez-vous maintenant
×
×
  • Créer...