Aller au contenu

[Arcade PC] SDVX Vivid Wave


adonis495

Messages recommandés

Il y a 17 heures, qpwoeiruty a dit :

I am using a translator

 

I want an edit file KFC-2021083100 soudvoltex.dll

can you provide the edit file?

 

If only the DLL file is modified, it is possible to boot into Valkyrie mode, but it cannot be used normally.

 

Please wait for the latest Asphysia SDVX Plugin or wait for the talented people's solutions to be uploaded.

Lien vers le commentaire
Partager sur d’autres sites

On 2021/7/6 at 10:36 PM, Pineapple12 said:

valk mode

offset : 0x3f1bd5 off : 0x87 0x05 on : 0x47 0x0c

120Hz Support

offset : 0x6fc0be off : 0x4e on : 0x5e

Search and copy surrounding values.

Because unless it's completely new development, the value of the previous setting will be maintaned and only the adress will change.

on 21051802 version dll

found on 3f1bd5 / 00 00 48 8D 15 87 05 : valk mode

found on 6fc0be / 49 40 00 00 00 00 00 00 4E : 120Hz Support

I have tried editing 2021083100 dll according to this(and ea3-config.xml by the same time),  the boot was successful with valk and the new crew also showed up. However, my VF showed 0.00 and clear medals and best scores do not appear, though top scores do appear.

image.png.932867213a95f20ca9ed100ceca99492.png


In addition, the same error as follow did occur as accessing my card at a second time. 

On 2021/9/13 at 3:34 AM, 123456778 said:

If you try to access the card again after playing any song and saving it

 

Unable to start the game with an error.

 

Guess further updates in asphyxia plugin required.

Modifié par hxjz233
Lien vers le commentaire
Partager sur d’autres sites

il y a 38 minutes, hxjz233 a dit :

I have tried editing 2021083100 dll according to this(and ea3-config.xml by the same time),  the boot was successful with valk and the new crew also showed up. However, my VF showed 0.00 and clear medals and best scores do not appear, though top scores do appear.

image.png.932867213a95f20ca9ed100ceca99492.png


In addition, the same error as follow did occur as accessing my card at a second time. 

 

Guess further updates in asphyxia plugin required.

How to activate national highscores and store highs?

 

Is this a feature added from KFC-2021083100?

 

Could you please let me know if it is available in the previous version as well?

Lien vers le commentaire
Partager sur d’autres sites

https://mega.nz/file/ddcggJgR#_-sjUo93hKQcte0Jc9m05Pfc1MI8rOFxGLETEtnTDws

this is the 0831dll I use, with 120hz support and valkyrie mode turned on

However, I DO NOT recommend playing with it, since asphyxia has not supported the version yet, which may lead to a savedata with error, ruining your play history on the card.

Lien vers le commentaire
Partager sur d’autres sites

9 minutes ago, emuemuring said:

How to activate national highscores and store highs?

 

Is this a feature added from KFC-2021083100?

 

Could you please let me know if it is available in the previous version as well?

 

Probably not and they also appear in 0608, and neither do I know where to turn on displaying the highscores. In fact I thought that they appear by default (though they meant nothing since the "national score" is read from asphyxia, and eventually meant local highscore).:gene:

Lien vers le commentaire
Partager sur d’autres sites

il y a 4 minutes, hxjz233 a dit :

 

Probably not and they also appear in 0608, and neither do I know where to turn on displaying the highscores. In fact I thought that they appear by default (though they meant nothing since the "national score" is read from asphyxia, and eventually meant local highscore).:gene:

As I confirmed a while ago, it is activated by pressing the keypad number 8 in the song select window.
Use Spice's Virtual Keypad or touchscreen keypad in Valkyrie Mode

Lien vers le commentaire
Partager sur d’autres sites

On 9/14/2021 at 11:42 PM, kamaboko said:

Also, is there a way to match, friend, or arena games online?

no, you can't

 

11 hours ago, hxjz233 said:

I have tried editing 2021083100 dll according to this(and ea3-config.xml by the same time),  the boot was successful with valk and the new crew also showed up. However, my VF showed 0.00 and clear medals and best scores do not appear, though top scores do appear.

image.png.932867213a95f20ca9ed100ceca99492.png

2021082100 has change some address, some old address is not correct anymore becareful when edit it, set the "numpad 8" in spicecfg then use it in-game

 

11 hours ago, hxjz233 said:

In addition, the same error as follow did occur as accessing my card at a second time. 

 

Guess further updates in asphyxia plugin required.

Maybe this or...maybe the problem come from DLL, we don't know it yet...because I have already try to turn on WASAPI in DLL but the game won't launch, so I think mostly the problem come from DLL

Modifié par 123456778
Lien vers le commentaire
Partager sur d’autres sites

[2021/09/16 15:09:54] I:Attach: in ONLINEUPDATE
[2021/09/16 15:09:54] I:Attach: out ONLINEUPDATE
[2021/09/16 15:09:54] I:Detach: in ONLINEUPDATE
[2021/09/16 15:09:54] I:Detach: out ONLINEUPDATE
[2021/09/16 15:09:54] I:Attach: in CONFIG_VERISON_CHECK
[2021/09/16 15:09:54] I:Attach: out CONFIG_VERISON_CHECK
[2021/09/16 15:12:24] M:xrpc: message.get submit, verbose=0, text_xml=0, plain=0(1), esign=0(0) extend=0
[2021/09/16 15:12:24] M:tmrlist: pcbtracker[15:19:22] - services[16:39:22] - facility[2021/09/17 03:09:22]
[2021/09/16 15:12:24] M:xrpc: message.get request
[2021/09/16 15:12:24] M:xrpc: connect(127.0.0.1:8083,1)
[2021/09/16 15:12:24] M:xrpc: stat: message.get
[2021/09/16 15:12:24] M:xrpc: stat: 127.0.0.1+0: 1 1 1 1.
[2021/09/16 15:12:24] M:xrpc: message.get result make/pkt/comm/resp/fin=13/24/3537/61/13
[2021/09/16 15:12:24] M:tmrlist: message[15:15:22] - pcbtracker[15:19:22] - services[16:39:22] - facility[2021/09/17 03:09:22]
[2021/09/16 15:12:24] M:tmrlist: message[15:15:22] - pcbtracker[15:19:22] - services[16:39:22] - facility[2021/09/17 03:09:22]
[2021/09/16 15:15:24] M:xrpc: message.get submit, verbose=0, text_xml=0, plain=0(1), esign=0(0) extend=0
[2021/09/16 15:15:24] M:tmrlist: pcbtracker[15:19:22] - services[16:39:22] - facility[2021/09/17 03:09:22]
[2021/09/16 15:15:24] M:xrpc: message.get request
[2021/09/16 15:15:24] M:xrpc: connect(127.0.0.1:8083,1)
[2021/09/16 15:15:24] M:xrpc: stat: message.get
[2021/09/16 15:15:24] M:xrpc: stat: 127.0.0.1+0: 1 1 1 1.
[2021/09/16 15:15:24] M:xrpc: message.get result make/pkt/comm/resp/fin=26/32/9997/821/15
[2021/09/16 15:15:24] M:tmrlist: message[15:18:22] - pcbtracker[15:19:22] - services[16:39:22] - facility[2021/09/17 03:09:22]
[2021/09/16 15:15:24] M:tmrlist: message[15:18:22] - pcbtracker[15:19:22] - services[16:39:22] - facility[2021/09/17 03:09:22]
[2021/09/16 15:18:24] M:xrpc: message.get submit, verbose=0, text_xml=0, plain=0(1), esign=0(0) extend=0
[2021/09/16 15:18:24] M:tmrlist: pcbtracker[15:19:22] - services[16:39:22] - facility[2021/09/17 03:09:22]
[2021/09/16 15:18:24] M:xrpc: message.get request
[2021/09/16 15:18:24] M:xrpc: connect(127.0.0.1:8083,1)
[2021/09/16 15:18:24] M:xrpc: stat: message.get
[2021/09/16 15:18:24] M:xrpc: stat: 127.0.0.1+0: 1 1 1 1.
[2021/09/16 15:18:24] M:xrpc: message.get result make/pkt/comm/resp/fin=12/25/5608/1351/14
[2021/09/16 15:18:24] M:tmrlist: pcbtracker[15:19:22] - message[15:21:22] - services[16:39:22] - facility[2021/09/17 03:09:22]
[2021/09/16 15:18:24] M:tmrlist: pcbtracker[15:19:22] - message[15:21:22] - services[16:39:22] - facility[2021/09/17 03:09:22]
[2021/09/16 15:19:24] M:xrpc: pcbtracker.alive submit, verbose=0, text_xml=0, plain=0(1), esign=0(0) extend=0
[2021/09/16 15:19:24] M:xrpc: pcbtracker.alive request
[2021/09/16 15:19:24] M:tmrlist: message[15:21:22] - services[16:39:22] - facility[2021/09/17 03:09:22]
[2021/09/16 15:19:24] M:xrpc: connect(127.0.0.1:8083,1)
[2021/09/16 15:19:24] M:xrpc: stat: pcbtracker.alive
[2021/09/16 15:19:24] M:xrpc: stat: 127.0.0.1+0: 1 1 1 1.
[2021/09/16 15:19:24] M:xrpc: pcbtracker.alive result make/pkt/comm/resp/fin=18/28/4301/848/17
[2021/09/16 15:19:24] M:tmrlist: message[15:21:22] - pcbtracker[15:29:22] - services[16:39:22] - facility[2021/09/17 03:09:22]
[2021/09/16 15:19:24] M:tmrlist: message[15:21:22] - pcbtracker[15:29:22] - services[16:39:22] - facility[2021/09/17 03:09:22]
[2021/09/16 15:21:24] M:xrpc: message.get submit, verbose=0, text_xml=0, plain=0(1), esign=0(0) extend=0
[2021/09/16 15:21:24] M:tmrlist: pcbtracker[15:29:22] - services[16:39:22] - facility[2021/09/17 03:09:22]
[2021/09/16 15:21:24] M:xrpc: message.get request
[2021/09/16 15:21:24] M:xrpc: connect(127.0.0.1:8083,1)
[2021/09/16 15:21:24] M:xrpc: stat: message.get
[2021/09/16 15:21:24] M:xrpc: stat: 127.0.0.1+0: 1 1 1 1.
[2021/09/16 15:21:24] M:xrpc: message.get result make/pkt/comm/resp/fin=12/33/3793/61/26
[2021/09/16 15:21:24] M:tmrlist: message[15:24:22] - pcbtracker[15:29:22] - services[16:39:22] - facility[2021/09/17 03:09:22]
[2021/09/16 15:21:24] M:tmrlist: message[15:24:22] - pcbtracker[15:29:22] - services[16:39:22] - facility[2021/09/17 03:09:22]


MY GAME STOPPED AFTER THIS MESSAGE WHAT SHOULD I DO?

Lien vers le commentaire
Partager sur d’autres sites

Hello, I'm facing an error like this:

 

 

[2021/09/17 03:53:46] W:property: search: prop==NULL and node==NULL
[2021/09/17 03:53:46] W:property: search: prop==NULL and node==NULL
[2021/09/17 03:53:52] W:signal: exception raised: EXCEPTION_INT_DIVIDE_BY_ZERO
[2021/09/17 03:53:52] I:signal: printing callstack
[2021/09/17 03:53:52] I:stackwalker: 000000018041DB24 (soundvoltex): (unknown): dll_entry_main
[2021/09/17 03:53:52] I:stackwalker: 000000018041DDB9 (soundvoltex): (unknown): dll_entry_main
[2021/09/17 03:53:52] I:stackwalker: 000000018014D346 (soundvoltex): (unknown): (unknown)
[2021/09/17 03:53:52] I:stackwalker: 000000018042E946 (soundvoltex): (unknown): dll_entry_main
[2021/09/17 03:53:52] I:stackwalker: 000000018042CEF0 (soundvoltex): (unknown): dll_entry_main
[2021/09/17 03:53:52] I:stackwalker: 00000001803BF1EB (soundvoltex): (unknown): dll_entry_main
[2021/09/17 03:53:52] I:stackwalker: 00000001803BE846 (soundvoltex): (unknown): dll_entry_main
[2021/09/17 03:53:52] I:stackwalker: 00000001801EE188 (soundvoltex): (unknown): dll_entry_main
[2021/09/17 03:53:52] I:stackwalker: 00000001801EE06D (soundvoltex): (unknown): dll_entry_main
[2021/09/17 03:53:52] I:stackwalker: 00000001801EDF75 (soundvoltex): (unknown): dll_entry_main
[2021/09/17 03:53:52] I:stackwalker: 00007FF723F3B238 (spice64): (unknown): (unknown)
[2021/09/17 03:53:52] I:stackwalker: 00007FF723F013C1 (spice64): (unknown): (unknown)
[2021/09/17 03:53:52] I:stackwalker: 00007FF723F014F6 (spice64): (unknown): (unknown)
[2021/09/17 03:53:52] I:stackwalker: 00007FFCF8F57034 (KERNEL32): (unknown): BaseThreadInitThunk
[2021/09/17 03:53:52] I:stackwalker: 00007FFCF9EE2651 (ntdll): (unknown): RtlUserThreadStart
[2021/09/17 03:53:52] F:signal: end
[2021/09/17 03:53:52] I:launcher: stopping subsystems
[2021/09/17 03:53:52] I:logger: stop
[2021/09/17 03:53:52] M:audio::wasapi: WrappedIAudioClient::Stop
[2021/09/17 03:53:52] I:rawinput: disposing devices

 

Can anyone help me how to fix this?

Modifié par pixaxe
Lien vers le commentaire
Partager sur d’autres sites

On 9/14/2021 at 11:53 PM, hxjz233 said:

https://mega.nz/file/ddcggJgR#_-sjUo93hKQcte0Jc9m05Pfc1MI8rOFxGLETEtnTDws

this is the 0831dll I use, with 120hz support and valkyrie mode turned on

However, I DO NOT recommend playing with it, since asphyxia has not supported the version yet, which may lead to a savedata with error, ruining your play history on the card.

 

Someone already mentioned previously a few posts earlier that  Asphyxia currently doesn't support 20210831 version yet, and that it can wipe out your scores/progress.

 

I backup my Ashpyxia data/scores (and some other game saves)  peridically to a folder on my Dropbox account.   I recommend this (or something similar) to anyone who is concerned about any potential data loss.

 

 

 

Lien vers le commentaire
Partager sur d’autres sites

Il y a 5 heures, Tsubakii a dit :

6144274137cff_49ZVGOU15AVBRG8F)K4WSB.png.4de663cf4aaf7c406437f36181acb2c4.png

I updated my 20210608 to 20210831 but when I started the game,I found all my scores were lost,after a play count,Asphyxia displayed this,how can I solved it

the 6.7.0 version plugins can solve the problem and can save scores,but I can not find a 6.7.0 plugins.And in addition,where can I get the latest asphyxia plugins.

Modifié par Tsubakii
Lien vers le commentaire
Partager sur d’autres sites

14 hours ago, pixaxe said:

Hello, I'm facing an error like this:

 

 

[2021/09/17 03:53:46] W:property: search: prop==NULL and node==NULL
[2021/09/17 03:53:46] W:property: search: prop==NULL and node==NULL
[2021/09/17 03:53:52] W:signal: exception raised: EXCEPTION_INT_DIVIDE_BY_ZERO
[2021/09/17 03:53:52] I:signal: printing callstack
[2021/09/17 03:53:52] I:stackwalker: 000000018041DB24 (soundvoltex): (unknown): dll_entry_main
[2021/09/17 03:53:52] I:stackwalker: 000000018041DDB9 (soundvoltex): (unknown): dll_entry_main
[2021/09/17 03:53:52] I:stackwalker: 000000018014D346 (soundvoltex): (unknown): (unknown)
[2021/09/17 03:53:52] I:stackwalker: 000000018042E946 (soundvoltex): (unknown): dll_entry_main
[2021/09/17 03:53:52] I:stackwalker: 000000018042CEF0 (soundvoltex): (unknown): dll_entry_main
[2021/09/17 03:53:52] I:stackwalker: 00000001803BF1EB (soundvoltex): (unknown): dll_entry_main
[2021/09/17 03:53:52] I:stackwalker: 00000001803BE846 (soundvoltex): (unknown): dll_entry_main
[2021/09/17 03:53:52] I:stackwalker: 00000001801EE188 (soundvoltex): (unknown): dll_entry_main
[2021/09/17 03:53:52] I:stackwalker: 00000001801EE06D (soundvoltex): (unknown): dll_entry_main
[2021/09/17 03:53:52] I:stackwalker: 00000001801EDF75 (soundvoltex): (unknown): dll_entry_main
[2021/09/17 03:53:52] I:stackwalker: 00007FF723F3B238 (spice64): (unknown): (unknown)
[2021/09/17 03:53:52] I:stackwalker: 00007FF723F013C1 (spice64): (unknown): (unknown)
[2021/09/17 03:53:52] I:stackwalker: 00007FF723F014F6 (spice64): (unknown): (unknown)
[2021/09/17 03:53:52] I:stackwalker: 00007FFCF8F57034 (KERNEL32): (unknown): BaseThreadInitThunk
[2021/09/17 03:53:52] I:stackwalker: 00007FFCF9EE2651 (ntdll): (unknown): RtlUserThreadStart
[2021/09/17 03:53:52] F:signal: end
[2021/09/17 03:53:52] I:launcher: stopping subsystems
[2021/09/17 03:53:52] I:logger: stop
[2021/09/17 03:53:52] M:audio::wasapi: WrappedIAudioClient::Stop
[2021/09/17 03:53:52] I:rawinput: disposing devices

 

Can anyone help me how to fix this?

Disable cameras?

Lien vers le commentaire
Partager sur d’autres sites

Le 2021. 9. 17. à 03:24, 123456778 a dit :

I have seen a guy playing with "Valkyrie Mode ON" with his 75hz monitor and his buttons pressing kinda smooth...so I think it is possible to do it.

Oh, may I know his spicetool & graphic setting??

Did he post his own setting?

my monitor is 75hz too.

Lien vers le commentaire
Partager sur d’autres sites

On 9/11/2021 at 4:40 PM, Kclz said:

Thanks bro 

but actually I saw relevant posts that said the same thing as yours, and I did exactly what it said but nothing happened, there was no 'ok' or any instructions

During calibration, you press start once, and it calibrates the left most value for turning VOL-L, which would be 0, then after it says COUNT=OK,

press start again to calibrate the max value, which would be 1023, it will show OK again, and repeat for VOL-R

Lien vers le commentaire
Partager sur d’autres sites

On 7/18/2021 at 12:32 AM, fact said:

After doing some more research I was able to create an edited dll that runs 120hz and valk mode on version KFC-2021061600

 

You can download it here:

https://drive.google.com/file/d/16UKDs63SjaqT_BD3l-WuW16b4AtJlJEq/view?usp=sharing

 

just change the name back to soundvoltex.dll and in contents/props/ea3-config.xml change spec to G.

unfortunately for me the performance was p meh even tho it was running over 100fps, it would probably look good at a locked 120, but I'll stick to the unmodified 60hz dll for now. For reference I'm using a  geforce 1030.

 

I downloaded this and followed the instructions but It doesn't feel like 120 fps to me? The notes seem laggy and I already capped my fps to 120. My rig is a i9 10850k + rtx 3070 FYI. Also, I don't get why the timing is completely off for the notes too.

Lien vers le commentaire
Partager sur d’autres sites

Hello so i get everytime this problem. First of all vivid wave is normally starting but eg not, i installed c++ redistributales and also dx 2010 drivers but it wont work

 

 

[2021/09/20 09:19:12] I:launcher: SpiceTools Bootstrap (x64)

[2021/09/20 09:19:12] I:launcher: 1.0-V-2021-05-27T11:04:42

[2021/09/20 09:19:12] I:launcher: arguments: -w -richpresence

[2021/09/20 09:19:12] I:superexit: enabled

[2021/09/20 09:19:12] I:avs-core: updated heap size: 16777216 -> 268435456

[2021/09/20 09:19:12] I:game: pre_attach: Sound Voltex

[2021/09/20 09:19:12] I:rawinput: detected performance counter frequency: 10000000

[2021/09/20 09:19:12] I:rawinput: reloading devices

[2021/09/20 09:19:12] M:rawinput: skipping vendor-specific device

[2021/09/20 09:19:12] I:rawinput: printing list of detected devices

[2021/09/20 09:19:12] I:rawinput: detected device count: 3

[2021/09/20 09:19:12] M:rawinput: device name: \\?\HID#MSFT0001&Col03#5&2f3f909c&0&0002#{4d1e55b2-f16f-11cf-88cb-001111000030}

[2021/09/20 09:19:12] M:rawinput: device desc: HID-kompatibles Touchpad

[2021/09/20 09:19:12] M:rawinput: device handle: 0x100ab

[2021/09/20 09:19:12] M:rawinput: device type: HID

[2021/09/20 09:19:12] M:rawinput: device preparsed size: 1532

[2021/09/20 09:19:12] M:rawinput: device usage: Touch Pad

[2021/09/20 09:19:12] M:rawinput: device button caps count: 3

[2021/09/20 09:19:12] M:rawinput: device button caps detected: Tip Switch to Tip Switch (66-66)

[2021/09/20 09:19:12] M:rawinput: device button caps detected: Touch Valid to Touch Valid (71-71)

[2021/09/20 09:19:12] M:rawinput: device button caps detected: Button 1 to Button 1 (1-1)

[2021/09/20 09:19:12] M:rawinput: device button output caps count: 0

[2021/09/20 09:19:12] M:rawinput: device value caps count: 6

[2021/09/20 09:19:12] M:rawinput: device value caps detected: Contact identifier (0 to 15, 4-bit)

[2021/09/20 09:19:12] M:rawinput: device value caps detected: X (0 to 3203, 16-bit)

[2021/09/20 09:19:12] M:rawinput: device value caps detected: Y (0 to 1884, 16-bit)

[2021/09/20 09:19:12] M:rawinput: device value caps detected: Unknown (000d:0056) (0 to 65535, 16-bit)

[2021/09/20 09:19:13] M:rawinput: device value caps detected: Contact count (0 to 127, 8-bit)

[2021/09/20 09:19:13] M:rawinput: device value caps detected: Button 197 (0 to 1, 8-bit)

[2021/09/20 09:19:13] M:rawinput: device name: \\?\ACPI#MSFT0001#4&345c6748&0#{884b96c3-56ef-11d1-bc8c-00a0c91405dd}

[2021/09/20 09:19:13] M:rawinput: device desc: PS/2-Standardtastatur

[2021/09/20 09:19:13] M:rawinput: device handle: 0x100a7

[2021/09/20 09:19:13] M:rawinput: device type: KEYBOARD

[2021/09/20 09:19:13] M:rawinput: device name: \\?\HID#MSFT0001&Col01#5&2f3f909c&0&0000#{378de44c-56ef-11d1-bc8c-00a0c91405dd}

[2021/09/20 09:19:13] M:rawinput: device desc: HID-konforme Maus

[2021/09/20 09:19:13] M:rawinput: device handle: 0x100a5

[2021/09/20 09:19:13] M:rawinput: device type: MOUSE

[2021/09/20 09:19:13] M:rawinput: done printing devices

[2021/09/20 09:19:13] I:hooks::lang: early initialization

[2021/09/20 09:19:13] I:avs-core: loading DLL

[2021/09/20 09:19:13] M:avs-core: version string: 2.17.3.0

[2021/09/20 09:19:13] I:avs-core: Found AVS2 core 2.17.3.0

[2021/09/20 09:19:13] M:avs-core: optional functions identified

[2021/09/20 09:19:13] I:avs-ea3: loading DLL

[2021/09/20 09:19:13] I:avs-ea3: Found AVS2 EA3 2.17.3.0

[2021/09/20 09:19:13] I:network: SpiceTools Network

[2021/09/20 09:19:13] I:network: Network preferences: 10.9.0.0

[2021/09/20 09:19:13] I:avs-core: booting (using prop/avs-config.xml)

[2021/09/20 09:19:13] I:avs-core: log level: all

[2021/09/20 09:19:13] M:avs-core: using heap size: 268435456

[----/--/-- --:--:--] I:boot: AVS2 2.17.3 r8311, WIN7-X64-icc, release @ 2018-01-24 15:17:59+9

[----/--/-- --:--:--] I:boot: boot type = FULL

[----/--/-- --:--:--] M:boot: mode/product : 0

[----/--/-- --:--:--] M:boot: log/netsci/enable : 0

[----/--/-- --:--:--] M:boot: log/netsci/server : "localhost:42197"

[----/--/-- --:--:--] M:boot: desc/nr_desc : 824

[----/--/-- --:--:--] M:boot: thread/nr_thread : 256

[----/--/-- --:--:--] M:boot: thread/nr_mutex : 1024

[----/--/-- --:--:--] M:boot: thread/nr_cond : 32

[----/--/-- --:--:--] M:boot: thread/nr_event : 64

[----/--/-- --:--:--] M:boot: thread/nr_semaphore : 64

[----/--/-- --:--:--] M:boot: thread/nr_cond_state : 32

[----/--/-- --:--:--] M:boot: thread/nr_alarm : 16

[----/--/-- --:--:--] M:boot: thread/min_stack : 4096

[----/--/-- --:--:--] M:boot: thread/max_stack : 2097152

[----/--/-- --:--:--] M:boot: thread/mutex_delay : 0

[----/--/-- --:--:--] M:boot: thread/priority : 2

[----/--/-- --:--:--] M:boot: fs/nr_filesys : 16

[----/--/-- --:--:--] M:boot: fs/nr_mountpoint : 4096

[----/--/-- --:--:--] M:boot: fs/nr_mounttable : 32

[----/--/-- --:--:--] M:boot: fs/nr_filedesc : 16384

[----/--/-- --:--:--] M:boot: fs/link_limit : 8

[----/--/-- --:--:--] M:boot: fs/root/fstype : "fs"

[----/--/-- --:--:--] M:boot: fs/root/device : "."

[----/--/-- --:--:--] M:boot: fs/root/option : "posix=1"

[----/--/-- --:--:--] M:boot: fs/mounttable_selector : "boot"

[----/--/-- --:--:--] M:boot: net/nr_protocol : 16

[----/--/-- --:--:--] M:boot: net/nr_socket : 32

[----/--/-- --:--:--] M:boot: net/enable_raw : 1

[----/--/-- --:--:--] M:boot: net/lz77sock/enable : 1

[----/--/-- --:--:--] M:boot: net/multisock/enable : 1

[----/--/-- --:--:--] M:boot: net/eaudp/enable : 1

[----/--/-- --:--:--] M:boot: net/config_file : ""

[----/--/-- --:--:--] M:boot: net/addrinfo_nr_cache : 8

[----/--/-- --:--:--] M:boot: net/addrinfo_expire : 5400

[----/--/-- --:--:--] M:boot: net/addrinfo_log : 0

[----/--/-- --:--:--] M:boot: time/gmt_offset : 3600

[----/--/-- --:--:--] M:boot: time/local_offset : 0

[----/--/-- --:--:--] M:boot: time/config_file : "/dev/nvram/clock.xml"

[----/--/-- --:--:--] M:boot: time/debug_local_offset : 0

[----/--/-- --:--:--] M:boot: time/debug_time_source : 0

[----/--/-- --:--:--] M:boot: thread/pool/affinity_mask : 0

[----/--/-- --:--:--] M:boot: thread/pool/stack_size : 65536

[----/--/-- --:--:--] M:boot: thread/pool/expire_count : 100

[----/--/-- --:--:--] M:boot: thread/pool/init_thread : 8

[----/--/-- --:--:--] M:boot: heap/enable_stat : 1

[----/--/-- --:--:--] M:boot: heap/free_clean : 0

[----/--/-- --:--:--] M:boot: heap/verbose : 0

[----/--/-- --:--:--] M:boot: heap/debug : 0

[----/--/-- --:--:--] M:boot: heap/_type : 1

[----/--/-- --:--:--] M:boot: heap/force_exclusive : 0

[----/--/-- --:--:--] M:boot: self_test/base_path : ""

[----/--/-- --:--:--] M:boot: self_test/random_seed : ""

[----/--/-- --:--:--] I:boot: heap range: 0x000002444bc99040 10000000 0x000002445bc99040 0x000002444bc99040

[----/--/-- --:--:--] I:boot: boot sysdep

[----/--/-- --:--:--] I:boot: x86: detect CPU

[----/--/-- --:--:--] I:boot: x86: - vendor : Intel

[----/--/-- --:--:--] I:boot: x86: - family : 6

[----/--/-- --:--:--] I:boot: x86: - model : 140

[----/--/-- --:--:--] I:boot: x86: - stepping : 1

[----/--/-- --:--:--] I:boot: x86: - name : 11th Gen Intel(R) Core(TM) i3-1115G4 @ 3.00GHz

[----/--/-- --:--:--] I:boot: x86: - extension : SSE SSE2 SSE3 SSSE3 SSE4.1 SSE4.2 AVX FMA3 

[----/--/-- --:--:--] I:boot: x86: - RDTSC : Invariant, RDTSCP

[----/--/-- --:--:--] I:boot: boot desc

[----/--/-- --:--:--] I:desc: boot: nr_desc=824

[----/--/-- --:--:--] I:boot: boot time

[----/--/-- --:--:--] I:boot: time: You can use RDTSC safely on this platform, because

[----/--/-- --:--:--] I:boot: time: - Windows Vista/7/8 synchronizes RDTSC between CPU cores on boot.

[----/--/-- --:--:--] I:boot: time: - CPU has Invariant TSC.

[----/--/-- --:--:--] I:boot: time: use RDTSC as tick

[----/--/-- --:--:--] I:boot: time: use RDTSC as high precision timer

[----/--/-- --:--:--] I:boot: boot thread

[----/--/-- --:--:--] I:boot: thread: nr_processor=4

[----/--/-- --:--:--] I:boot: thread: nr_thread=256, nr_mutex=1024, nr_cond=32, nr_event=64, nr_semaphore=64, nr_alarm=16

[----/--/-- --:--:--] I:boot: starting desc

[----/--/-- --:--:--] I:boot: starting thread. priority=2

[----/--/-- --:--:--] I:boot: starting time

[----/--/-- --:--:--] I:boot: time: RTC: bits=64, freq=10000000/s, no wrap

[----/--/-- --:--:--] I:boot: time: tick: bits=64, freq=2995196636/s, no wrap

[----/--/-- --:--:--] I:boot: time: high precision timer (usec): bits=64, freq=2995196636/s, no wrap

[----/--/-- --:--:--] I:boot: time: high precision timer (nsec): bits=64, freq=2995196636/s, no wrap

[----/--/-- --:--:--] I:boot: boot fs

[----/--/-- --:--:--] I:fs: boot: nr_filesys=16, nr_mountpoint=4096, nr_mounttable=32, nr_filedesc=16384

[----/--/-- --:--:--] I:boot: boot net_private

[----/--/-- --:--:--] I:boot: avs-gheap: type=GHEAP, heap=0x000002444c1a7ff0, sz=0faf1050(263131216)

[----/--/-- --:--:--] I:boot: boot stdio

[----/--/-- --:--:--] I:boot: boot std

[----/--/-- --:--:--] I:boot: add filesys (default)

[----/--/-- --:--:--] I:boot: add filesys (nvram)

[----/--/-- --:--:--] I:boot: add filesys (imagefs)

[----/--/-- --:--:--] I:boot: add filesys (mirrorfs)

[----/--/-- --:--:--] I:boot: add filesys (cryptfs)

[----/--/-- --:--:--] I:boot: add filesys (nvram2)

[----/--/-- --:--:--] I:boot: mount (/, .)

[----/--/-- --:--:--] I:boot: open mounttable by /config/fs/mounttable/vfs#*

[----/--/-- --:--:--] I:boot: load gmt/local offset from /dev/nvram/clock.xml

[----/--/-- --:--:--] I:boot: gmt_offset=3600

[----/--/-- --:--:--] I:boot: local_offset=0

[----/--/-- --:--:--] I:boot: boot net

[----/--/-- --:--:--] I:net: lz77sock: worksize=8216

[----/--/-- --:--:--] I:net: multisock: worksize=328

[----/--/-- --:--:--] I:net: eaudp: worksize=56

[----/--/-- --:--:--] I:boot: boot sntp

[----/--/-- --:--:--] M:sntp: values: 0,1,1000,180000,5000,3600000.

[----/--/-- --:--:--] I:sntp: backup read failed.

[----/--/-- --:--:--] I:sntp: can't read backup.

[----/--/-- --:--:--] M:sntp: end of adjust.

[----/--/-- --:--:--] I:boot: logger: /dev/raw/log exits

[----/--/-- --:--:--] I:boot: logger: create log file as /dev/raw/log/*

[2021/09/20 08:19:13] I:boot: finish

[2021/09/20 09:19:13] I:ssl: initializing

[2021/09/20 09:19:13] I:avs-game: loading DLL 'soundvoltex.dll'

[2021/09/20 09:19:13] W:libutils: 'D:\sdvx\KFC 2021\KFC-2021060802\contents\soundvoltex.dll' couldn't be loaded: Das angegebene Modul wurde nicht gefunden.

 

[2021/09/20 09:19:13] F:libutils: 

 

Please check if soundvoltex.dll exists and the permissions are fine.

If the problem still persists, try installing:

* Microsoft Visual C++ Redistributables (*all* versions, *both* x86/x64)

    Hint: use one of the AIO installers (e.g. https://github.com/abbodi1406/vcredist)

* DirectX End-User Runtimes (June 2010)

* Running Windows 10 "N"?

    Grab: https://www.microsoft.com/en-us/software-download/mediafeaturepack

    Check: https://support.microsoft.com/en-us/help/4562569/media-feature-pack-for-windows-10-n-may-2020

* Running Windows 7 "N"?

    Grab: https://www.microsoft.com/en-us/download/details.aspx?id=16546

* Still have problems?

    Find the missing dependency using: http://www.dependencywalker.com/

[2021/09/20 09:19:13] I:launcher: stopping subsystems

[2021/09/20 09:19:13] I:logger: stop

[2021/09/20 09:19:13] I:rawinput: disposing devices

Lien vers le commentaire
Partager sur d’autres sites

On 9/17/2021 at 20:44, pixaxe said:

So, I succeeded in making the game work. But e amusement doesn’t work. I can play without the card. But when I insert the card and type in the security code(4 numbers), the game goes back to front screen. Does anybody know how to fix this?

disable e amuse emulation and maintenance in spicetool.

Lien vers le commentaire
Partager sur d’autres sites

near.PNG.60c8eb203f817a699d08e51c94907bd1.PNG

 

Where can I get the latest version of SDVX plugin of Asphyxia core corresponding to KFC-2021083100?

 

When running with v6.6.4, the Volforce value is displayed as 0.

 

I recently looked at a picture like this, and the Volforce level is displayed normally.

 

It seems that the latest version has been released as there is a NEAR & NOAH crew.

 

Please help.

Lien vers le commentaire
Partager sur d’autres sites

I am using KFC-2021060802.
The following items are installed or placed in folders.
dx2010 june, c ++ ALL in One, d3d9.dll, nvcuda.dll, nvcuvid.dll

However, the message soundvoltex.dll'couldn't be loaded is displayed.

I tried using soundvoltex.dll of KFC-2020011500 for KFC-2021060802 and it was able to start. (Crash when selecting a song)

Does anyone know what to do?

 

i021540966915874611296.png

Lien vers le commentaire
Partager sur d’autres sites

Veuillez vous connecter pour commenter

Vous pourrez laisser un commentaire après vous êtes connecté.



Connectez-vous maintenant
×
×
  • Créer...