[Arcade PC] SDVX Vivid Wave

[woopie2]

Help, my game is running at 80-90 fps instead of 120 and its really not smooth and harder to read

[kwong103]

Does anyone know this problem? My game has black frame in 1440p portrait.

Modifié le 5 octobre par kwong103

[PrinzEugen39]

On 10/4/2024 at 6:36 PM, woopie2 said:

Help, my game is running at 80-90 fps instead of 120 and its really not smooth and harder to read

what is your cpu + gpu

[Cinna]

On 10/5/2024 at 9:46 AM, kwong103 said:

Does anyone know this problem? My game has black frame in 1440p portrait.

If you have an nvidia GPU, make sure you set your Display Scaling to Display instead of GPU.

[kwong103]

il y a une heure, Cinna a dit :

If you have an nvidia GPU, make sure you set your Display Scaling to Display instead of GPU.

Thank for your reply. I already set my Display Scaling to Display but it doesn't work.

[trantu5816]

 

On 9/25/2024 at 2:09 AM, PhamHieu1998 said:

The game is running now but it's stuck at white screen, i still can hear the sound of the game and it's not being crashed, but right after i'm having a screenshot and open that then i can still see the game are tll being captured on that screenshot

 

 

Cấu hình máy yếu. Khó chơi được. Card rx560 chắc cũng cũ rồi nên khó hỗ trợ. 

Btw any update leaking guys?

Modifié le 9 octobre par trantu5816

[shangus0523]

sdvx 게임에서 계속 동기화되지 않고 랙이 너무 오래 걸립니다. 해결 방법이 있습니까? 

 

 

CPU - 5800X

GPU - 3080ti

ARM 56GB

Modifié le 9 octobre par shangus0523

[trantu5816]

27 minutes ago, shangus0523 said:

sdvx 게임에서 계속 동기화되지 않고 랙이 너무 오래 걸립니다. 해결 방법이 있습니까? 

 

 

CPU - 5800X

GPU - 3080ti

ARM 56GB

The video dont even have sound lol

[shangus0523]

18 minutes ago, trantu5816 said:

 

sry . Is it because of the frame drop that the song doesn't sync?

 

 

Modifié le 9 octobre par shangus0523

[crossss]

Hello, guys.

It runs smoothly in default mode and keeps 60Hz

However when change to Valkyrie (G) mode, refresh rate seems unlimited thouth i have patched 120Hz

the original refresh rate of monitor is 165Hz. i changed it to 120Hz but still not work

Does anyone have ideas? im really confused

 

Well i just force fps at 120hz in graphic card control panel and it works

if u have same problem, try this

Modifié le 10 octobre par crossss

[trantu5816]

On 10/10/2024 at 2:28 AM, shangus0523 said:

sry . Is it because of the frame drop that the song doesn't sync?

 

 

what sound setting you using? WASAPI or ASIO?

[PrinzEugen39]

On 10/5/2024 at 11:46 PM, kwong103 said:

Does anyone know this problem? My game has black frame in 1440p portrait.

 

maybe try running it on windowed mode and make it fullscreen using an app called borderless gaming

[kwong103]

Le 12/10/2024 à 08:33, PrinzEugen39 a dit :

 

maybe try running it on windowed mode and make it fullscreen using an app called borderless gaming

Thank for your reply.That is on windowed mode and borderless already.

[dbgustjr38]

does anyone know how to use arduino api in spicetools?

I want get these values to control led but I have no idea,, it's too hard

[bicarus]

18 hours ago, dbgustjr38 said:

does anyone know how to use arduino api in spicetools?

I want get these values to control led but I have no idea,, it's too hard

 

 

Sample arduino code is included in every spice2x zip file. Look in api\arduino folder.

 

[dbgustjr38]

17 hours ago, bicarus said:

 

 

Sample arduino code is included in every spice2x zip file. Look in api\arduino folder.

 

I tried to use like this, but it doesn't work

[drops]

Has anyone compiled a link to a collection of base packs and clean dumps?

[strizzy]

5 hours ago, drops said:

Has anyone compiled a link to a collection of base packs and clean dumps?

https://pixeldrain.com/l/B5JPoyvA

[Lesteph25]

Le 13/10/2024 à 13:36, dbgustjr38 a dit :

does anyone know how to use arduino api in spicetools?

I want get these values to control led but I have no idea,, it's too hard

I do, it really works very well.
I will try to find my code for you.

 

is it an arduino leonardo ?

 

 

 

my file il for managed WS28 LED strip (for arduino leonardo)

RGB_252_led.ino

Modifié le 17 octobre par Lesteph25

[PrinzEugen39]

On 10/13/2024 at 2:31 PM, kwong103 said:

Thank for your reply.That is on windowed mode and borderless already.

yes, the thing is. the borderless mode on spice tools never work properly as far as i know
so what i do is left the setting on windowed only, then make it borderless using Borderless Gaming

[bicarus]

9 hours ago, PrinzEugen39 said:

yes, the thing is. the borderless mode on spice tools never work properly as far as i know
so what i do is left the setting on windowed only, then make it borderless using Borderless Gaming

 

It works fine for most people, assuming you are using a spice2x version from the last year or so. The borderless window feature was added because sdvx players requested it.

Modifié le 18 octobre par bicarus

[Bentoowo]

KFC-009-2024091000.7z ~ pixeldrain

[MAMA1397]

Does anyone know of any problems with SKILL ANALYZER?
When I open SKILL ANALYZER and try to select a course, it freezes.
Also, there are no courses.😭
Unlocking is disabled.

[trantu5816]

16 hours ago, MAMA1397 said:

Does anyone know of any problems with SKILL ANALYZER?
When I open SKILL ANALYZER and try to select a course, it freezes.
Also, there are no courses.😭
Unlocking is disabled.

have you disabled unlock all song in asphyxia? and update webui?

[MAMA1397]

7 時間前、trantu5816 は次のように述べました:

Asphyxiaですべての曲のロック解除を無効にしますか? WebUIを更新しましたか?

はい。Asphyxia のすべての曲のロック解除を無効にし、WebUI を更新しました。

公式SDVXプラグインver6.7.0でゲームは動くのですが、SKILL ANALYZERが使えません。
今fork-6.0.3.6を使おうとしているのですが、起動はするもののタイトル画面が真っ白です。
カードは読み込めるのですが回線がビジー状態と表示されます。どうすればいいでしょうか？

videocard is RTX3080

Modifié le 22 octobre par MAMA1397

[Cinna]

On 10/19/2024 at 8:01 PM, Bentoowo said:

KFC-009-2024091000.7z ~ pixeldrain

Do you have any of the updates that leads up to 2024100800?

[trantu5816]

15 hours ago, MAMA1397 said:

はい。Asphyxia のすべての曲のロック解除を無効にし、WebUI を更新しました。

公式SDVXプラグインver6.7.0でゲームは動くのですが、SKILL ANALYZERが使えません。
今fork-6.0.3.6を使おうとしているのですが、起動はするもののタイトル画面が真っ白です。
カードは読み込めるのですが回線がビジー状態と表示されます。どうすればいいでしょうか？

videocard is RTX3080

 

Uhmmmm first i think you shold delete old axphysia data (core and plugins) in your content folder. I'm using the fork-6.0.3.6 and have the same problem as your in first time setup but i forgot how to fix it lol. Let me have some time to research.

Just now, trantu5816 said:

Uhmmmm first i think you shold delete old axphysia data (core and plugins) in your content folder. I'm using the fork-6.0.3.6 and have the same problem as your in first time setup but i forgot how to fix it lol. Let me have some time to research.

(ONLY axphysia related things and you just reinstall it.)

[trantu5816]

1 minute ago, trantu5816 said:

Uhmmmm first i think you shold delete old axphysia data (core and plugins) in your content folder. I'm using the fork-6.0.3.6 and have the same problem as your in first time setup but i forgot how to fix it lol. Let me have some time to research.

(ONLY axphysia related things and you just reinstall it.)

Ahhhh I remember it. Have you make profile on axphysia yet? If not, do this. First, delete and reinstall things like I said. Second, you should make another card.txt file and new card number. Finally, when you start up the game and insert the card, just leave the game on and go to the localhost:8083 tab (it should pop up everytime you turn on axphysia and go to the Profiles -> make new profile. After that, close the game and axphysia and turn it on again. Hope this can fix.

[MAMA1397]

4 hours ago, trantu5816 said:

ああ、思い出しました。axphysia でプロファイルを作成しましたか? まだの場合は、これを実行してください。まず、私が言ったように、削除して再インストールします。次に、別の card.txt ファイルと新しいカード番号を作成する必要があります。最後に、ゲームを起動してカードを挿入したら、ゲームをオンのままにして、localhost:8083 タブに移動します (axphysia をオンにするたびにポップアップ表示され、[プロファイル] -> [新しいプロファイルの作成] に移動します)。その後、ゲームと axphysia を閉じて、もう一度オンにします。これで修正されるといいのですが。

Looks like I have no choice but to give up.
I reinstalled the KFC file and axphysia data,
but that didn't solve the problem.
If I wait a while the title screen will appear, but it says the line is busy.
Also, where do I create a profile?
When I follow the instructions to create a new card and load it, and go to the axphysia profile tab, there is data that has been created automatically, so how do I create a new one?

If possible, could you upload a photo?

[trantu5816]

2 hours ago, MAMA1397 said:

Looks like I have no choice but to give up.
I reinstalled the KFC file and axphysia data,
but that didn't solve the problem.
If I wait a while the title screen will appear, but it says the line is busy.
Also, where do I create a profile?
When I follow the instructions to create a new card and load it, and go to the axphysia profile tab, there is data that has been created automatically, so how do I create a new one?

If possible, could you upload a photo?

 

Yeah it look like this

34 minutes ago, trantu5816 said:

 

Yeah it look like this

It have a profile but you need to custom your data card in this tab by click on the edit icon in right

Modifié le 23 octobre par trantu5816

[MAMA1397]

It's solved!! Thank you very much!
I don't know why it was solved though...

[trantu5816]

On 10/24/2024 at 8:23 PM, MAMA1397 said:

It's solved!! Thank you very much!
I don't know why it was solved though...

Lol

[dbgustjr38]

On 10/18/2024 at 1:26 AM, Lesteph25 said:

I do, it really works very well.
I will try to find my code for you.

 

is it an arduino leonardo ?

 

 

 

my file il for managed WS28 LED strip (for arduino leonardo)

RGB_252_led.ino 4.78 kB · 11 downloads

It works!! Thank you very much😊