Aller au contenu

[Arcade PC] SDVX Vivid Wave


adonis495

Messages recommandés

22 hours ago, AssPiston said:

having similar issues!

 

but instead of 60fps, i get anything between 70-80fps

 

that is slightly more enjoyable than 60fps but yeah...

 

scoured all the pages and have tried multiple things to no avail..

 

are people actually playing at120hz?

Finally figured it out. If you have G-Sync compatible monitors, TURN G-SYNC OFF! This was quite literally the only thing standing between me and 120hz. Besides that I have completely default nvidia settings, works like a charm. Hope this helps.

Lien vers le commentaire
Partager sur d’autres sites

Hey everyone! Running KFC-2021083100. I have the DLL that Lesteph25 posted earlier for the 120hz patch. I've followed other instructions as well (above posts suggestions of having Gsync turned off. My monitor has been turned down to 1080p, and it is set to 120hz). My game runs fine when using F as my spec in ea3-config. When I edit it to G, and start the game, I only get a white screen on the Main and Sub screen, however I can see spicetools printing its regular logs, and I can hear audio from the game in the background. I've skimmed through this thread and haven't quite found this exact issue yet. I've checked the DLL in the patcher and 120hz/valk support is enabled, so I'm pretty confused.

 

Anyone know what it might be? Thanks in advance!

Modifié par clairvoyance
Lien vers le commentaire
Partager sur d’autres sites

1 hour ago, clairvoyance said:

Hey everyone! Running KFC-2021083100. I have the DLL that Lesteph25 posted earlier for the 120hz patch. I've followed other instructions as well (above posts suggestions of having Gsync turned off. My monitor has been turned down to 1080p, and it is set to 120hz). My game runs fine when using F as my spec in ea3-config. When I edit it to G, and start the game, I only get a white screen on the Main and Sub screen, however I can see spicetools printing its regular logs, and I can hear audio from the game in the background. I've skimmed through this thread and haven't quite found this exact issue yet. I've checked the DLL in the patcher and 120hz/valk support is enabled, so I'm pretty confused.

 

Anyone know what it might be? Thanks in advance!

I've figured this out (somewhat). My second monitor + the sub-screen was the issue. My second monitor is only 1080p60hz on my current setup. Once I unplugged my second monitor, the game worked absolutely flawlessly on 120hz. Hopefully this will work once I'm back at my home setup, as my second monitor there is 120hz as well, but we shall see and I'll update here if there are any problems showing the sub-screen.

Lien vers le commentaire
Partager sur d’autres sites

14 minutes ago, clairvoyance said:

I've figured this out (somewhat). My second monitor + the sub-screen was the issue. My second monitor is only 1080p60hz on my current setup. Once I unplugged my second monitor, the game worked absolutely flawlessly on 120hz. Hopefully this will work once I'm back at my home setup, as my second monitor there is 120hz as well, but we shall see and I'll update here if there are any problems showing the sub-screen.

ahh thanks it works now!

Lien vers le commentaire
Partager sur d’autres sites

10 hours ago, Lesteph25 said:

which dll?
the dll that comes with the game that you patched? or mine?

 

this one 120hz dll

On 2021/10/13 at 7:21 AM, Lesteph25 said:

Vsync = ON

freeSync = OFF

low lantency, Max Frame Rate, etc. = OFF

 

and this dll

https://1fichier.com/?ogcsj7a06aiakcovpgqn

change for "G" in ea3config.xml

 

and the game download by https://nyaa.si/view/1438218

Lien vers le commentaire
Partager sur d’autres sites

1 hour ago, Okashi said:

how do i get the game too launch?

 

Use one of the loaders which support it

Correctly configure as needed, info can be found for games which use the same loaders / configuration

Search function is at the top right of the page, when you are in a thread it only searches that thread !

 

Lien vers le commentaire
Partager sur d’autres sites

Just now, Onkel said:

 

Use one of the loaders which support it

Correctly configure as needed, info can be found for games which use the same loaders / configuration

Search function is at the top right of the page, when you are in a thread it only searches that thread !

 

Thx :) 

 

Lien vers le commentaire
Partager sur d’autres sites

19 minutes ago, Okashi said:

ok so ive got all the files for it, thing is the app launches but crashes after it, https://Okashi.femboy.date/l2ox1BNy (ignore my url name)

 

idk if its because it thinks its exceed gear even tho ive downloaded all files for vivid wave

this is what i get each time i launch the .bat

txt.txt

Lien vers le commentaire
Partager sur d’autres sites

Il y a 18 heures, herelooq a dit :

 

this one 120hz dll

and the game download by https://nyaa.si/view/1438218

oh... test this one

https://1fichier.com/?2gsv6ool95619x8hxw9b

Lien vers le commentaire
Partager sur d’autres sites

il y a une heure, kanon a dit :

You have to set the game in Valkyrie mode 120hz

You can get the files and tips in previous page , people talked a lot around it :very-good:

I already set Valkyrie mod 120. I'm using a sub-monitor connected to my laptop now, and I want touch panel to appear on the laptop screen.

 

Where should I set the monitor?

Lien vers le commentaire
Partager sur d’autres sites

Il y a 1 heure, qpwoeiruty a dit :

I already set Valkyrie mod 120. I'm using a sub-monitor connected to my laptop now, and I want touch panel to appear on the laptop screen.

 

Where should I set the monitor?

Does he already appear on one of your screen ? if so , set the game on your Sub-monitor and the touch panel shoud appear on your laptop :gene:

 

Modifié par kanon
Lien vers le commentaire
Partager sur d’autres sites

il y a 14 minutes, kanon a dit :

Does he already appear on one of your screen ? if so , set the game on your Sub-monitor and the touch panel shoud appear on your laptop :gene:

 

I set the main game on the sub monitor, but nothing appears on the laptop. I Need additional spicecfg setting? and Can you share the windows display settings?

Lien vers le commentaire
Partager sur d’autres sites

il y a 14 minutes, qpwoeiruty a dit :

I set the main game on the sub monitor, but nothing appears on the laptop. I Need additional spicecfg setting? and Can you share the windows display settings?

How does your laptop is plug to your pc ?

Lien vers le commentaire
Partager sur d’autres sites

Il y a 7 heures, qpwoeiruty a dit :

I dont have pc. Im using HDMI to connect my laptop and sub-monitor(32 inches)

 

And I set the sub-monitor as main in the windows settings

I don't know if it's IIDX or SDVX anymore, but I remember reading that it was necessary to set the touch monitor as the main monitor

Lien vers le commentaire
Partager sur d’autres sites

il y a 53 minutes, Lesteph25 a dit :

I don't know if it's IIDX or SDVX anymore, but I remember reading that it was necessary to set the touch monitor as the main monitor

Indeed my game run on the second monitor and the touch screen on the main screen , should work with this setup for you with your laptop @qpwoeiruty

 

Lien vers le commentaire
Partager sur d’autres sites

On 2021/10/15 at 7:55 AM, Lesteph25 said:
On 2021/10/14 at 1:46 PM, herelooq said:

 

this one 120hz dll

and the game download by https://nyaa.si/view/1438218

oh... test this one

https://1fichier.com/?2gsv6ool95619x8hxw9b

fps still same,

But I found that the CPU usage of the program was too high to exceed 70%, and then I entered these in CMD and FPS returned to 120HZ normally.

PowerCfg /SETACVALUEINDEX SCHEME_CURRENT SUB_PROCESSOR IDLEDISABLE 000
PowerCfg /SETACTIVE SCHEME_CURRENT
Lien vers le commentaire
Partager sur d’autres sites

Il y a 5 heures, kanon a dit :

Indeed my game run on the second monitor and the touch screen on the main screen , should work with this setup for you with your laptop @qpwoeiruty

 

 laptop monitor set the main monitor in Windows, the game screen appears only on the main monitor and nothing appearson on the sub-monitor.

How can I set the game screen to appear on the sub-monitor?

Lien vers le commentaire
Partager sur d’autres sites

Il y a 8 heures, qpwoeiruty a dit :

 laptop monitor set the main monitor in Windows, the game screen appears only on the main monitor and nothing appearson on the sub-monitor.

How can I set the game screen to appear on the sub-monitor?

Maybe : right click -> screen setting -> check mark [ make this screen the main screen ] where you want to make appear the game and the sub screen should appear on your sub monitor ,if that doesn't work i don't know '.'

Lien vers le commentaire
Partager sur d’autres sites

On 7/29/2021 at 8:37 PM, Cking543 said:

Anyone know how to set up the knobs in spicetools for a contrroller?

 

I just got the faucetwo and I can't calibrate the knobs properly

 

every time i bind the Vol-L or Vol-R  knobs on the controller it goes in one direction forever 

@Cking543 were you able to figure this out? Just got my Faucetwo and I've been getting that issue for both Vivid Wave and Exceed Gear. I'm not sure how to make it work since every time I calibrate the knobs it's always infinitely scrolling even when I'm not moving the knobs.

 

As you can see that they seem to infinitely seem to be active even if I let go which makes navigating the menus way too fast/difficult. Also eventually when you turn left on either knob, it sometimes triggers the X+ or Y+ axis then eventually goes back to X-. Is that intended?

 

image.png.36f844bf874c939f07b8e6aeb8823c81.png

 

Just tried USC and the knobs are consistent there but on Vivid Wave/Exceed Gear they aren't and they just want to go the opposite direction during those long slow lasers.

 

 

 

EDIT: Make sure you bind your knobs like this on the Faucetwo instead of X- and X+ / Y- and Y+ and everything works as intended.

 

image.png.9185aa3cca4ab5f7e0b82330d6ba7ceb.png

Modifié par WoofWoofWulfy
Lien vers le commentaire
Partager sur d’autres sites

Invité Victoria Skylight
Am 15.10.2021 um 23:54 schrieb kanon:

Indeed my game run on the second monitor and the touch screen on the main screen , should work with this setup for you with your laptop @qpwoeiruty

 

I don't have any Touch Screen Monitor anyway. But I can play the Game with a Mouse, Keyboard and Joypad.

It's work very well, if you aks me.

Lien vers le commentaire
Partager sur d’autres sites

Quote

 

[2021/10/19 03:27:00] I:boot: finish
[2021/10/19 03:27:00] I:ssl: initializing
[2021/10/19 03:27:00] I:avs-game: loading DLL 'soundvoltex.dll'
[2021/10/19 03:27:00] W:libutils: 'Z:\KFC-2021083100\contents\soundvoltex.dll' couldn't be loaded: The specified module could not be found.

[2021/10/19 03:27:00] F:libutils: 

Please check if soundvoltex.dll exists and the permissions are fine.
If the problem still persists, try installing:
* Microsoft Visual C++ Redistributables (*all* versions, *both* x86/x64)
    Hint: use one of the AIO installers (e.g. https://github.com/abbodi1406/vcredist)
* DirectX End-User Runtimes (June 2010)
* Running Windows 10 "N"?
    Grab: https://www.microsoft.com/en-us/software-download/mediafeaturepack
    Check: https://support.microsoft.com/en-us/help/4562569/media-feature-pack-for-windows-10-n-may-2020
* Running Windows 7 "N"?
    Grab: https://www.microsoft.com/en-us/download/details.aspx?id=16546
* Still have problems?
    Find the missing dependency using: http://www.dependencywalker.com/
[2021/10/19 03:27:00] I:launcher: stopping subsystems
[2021/10/19 03:27:00] I:logger: stop
[2021/10/19 03:27:00] I:rawinput: disposing devices
[2021/10/19 03:27:02] I:signal: console ctrl handler called: CTRL_CLOSE_EVENT
[2021/10/19 03:27:02] I:launcher: stopping subsystems
[2021/10/19 03:27:02] I:logger: stop

 

 

I had installed all the VC++ and DirectX packages but the problem still exists. How can I solve this?

My hardware:

CPU: R5 3600

GPU: RX 5500XT

Lien vers le commentaire
Partager sur d’autres sites

So this is more a general game question

 

1. What exactly is premium time and why would you play that over normal?

2. How do you select the 3 "albums" or whatever you call it that seem to always be locked?

3. Most importantly, how do you save? I have a modded dll that gives infinite premium time, but I have no idea where to "quit" so I can save my progress. Even with regular play, where do you go to save?

 

I do have my card loaded so I'm definitely in my profile and not just playing as a guest but whenever I close the game and load up my card again, I'm back at 0.

Lien vers le commentaire
Partager sur d’autres sites

Veuillez vous connecter pour commenter

Vous pourrez laisser un commentaire après vous êtes connecté.



Connectez-vous maintenant
×
×
  • Créer...