Aller au contenu

[Arcade PC] SDVX Vivid Wave


adonis495

Messages recommandés

Hi guys

I tried to generate a 'card' for my SDVX VI, I created a card0.txt, did the adjustments to spicecfg and genetared a card number for my 'card', in accordance with a post that teaches you how to get your own 'card'. However, everytime when I open the game and insert my 'card', it always tells me to set the password and the username, which means that I have to create a new 'card' everytime, and the data has not been saved. Is there any solutions to this problem? 

 

Edit: Problem solved. I changed the game files into a status that there is no need to edit those files as admin(ugh sorry for my bad English but that's all I can do to describe), and then the card data can be saved and therefore usable during your next gameplay.

Modifié par Kclz
problem solved
Lien vers le commentaire
Partager sur d’autres sites

2 hours ago, Eric10255143 said:

First time here and I'm sorry for asking dumb questions, should I just click on asphyxia-core-x64 and spice64 in order to open the game?

you have to open asphyxia-core-64 first then the game

 

Lien vers le commentaire
Partager sur d’autres sites

il y a 6 minutes, Eric10255143 a dit :

Well that doesn't work for me tho...guess I have to figure out myself, thanks for helping!

direct X june 2010

https://www.microsoft.com/en-us/download/details.aspx?id=8109

 

and as kanon says : ALL the Microsoft Visual C++ (ver 2010 32bit and 64bit, 2013 32 bit and 64bit, 2015 etc...)

Modifié par Lesteph25
Lien vers le commentaire
Partager sur d’autres sites

45 minutes ago, Lesteph25 said:

direct X june 2010

https://www.microsoft.com/en-us/download/details.aspx?id=8109

 

and as kanon says : ALL the Microsoft Visual C++ (ver 2010 32bit and 64bit, 2013 32 bit and 64bit, 2015 etc...)

Ok I managed to download all the versions of them and direct x june 2010, but it still pop up the same thing

Lien vers le commentaire
Partager sur d’autres sites

 

Finally got my FauceTwo today :very-good:

 

Was easy to setup in SpiceTools - can also configure the HID Lighting options.   Tested it out on a few SDVX rips - works great so far.  Haven't taken the time to tweak some things such as the deadzone feature on the controller & sensitivity settings in SpiceTools,  but working pretty well on defaults.

 

 

fi9DbQs.jpg

Lien vers le commentaire
Partager sur d’autres sites

Hey guys.

How to get 120Hz support on KFC-2021061600 ? Bemani patcher (here: https://amaycien.github.io/BemaniPatcher/sdvx6.html ) does not offer it.

 

Would also like to know what " Force BIO2 (KFC) IO in Valkyrie mode " means.

 

EDIT 1: https://github.com/ReDesignedJP/BemaniPatcher/commit/b35891fb0f4e20e72e99597995d80ae75d9adb91

This commit on that fork seems to have support for it. Anyone wanna test it out?

Modifié par defvs_daniel
Lien vers le commentaire
Partager sur d’autres sites

3 hours ago, Onkel said:

Picture is to small to read

Division_of_Zero_by_Sephro_Hoyland.jpg

Whoops, sorry about that, lemme retry.  I was able to get the game to boot properly and run once, but now it just closes. 

 

 

NEVER MIND: I figured it out, had to disable the camera

 

20210909_172315.jpg

 

 

 

Modifié par Urabemiko
Lien vers le commentaire
Partager sur d’autres sites

Le 08/09/2021 à 13:48, Eric10255143 a dit :

Ok I managed to download all the versions of them and direct x june 2010, but it still pop up the same thing

you use bemanitools or spicetools ?

what is your GPU ?

what is your CPU ?

Lien vers le commentaire
Partager sur d’autres sites

26 minutes ago, Kclz said:

Does anybody know how to solve this?

 

Turn the left knob 3 times until it says OK

Then press start as far as I know

Not sure, use google translate on your phone to take a picture and translate the Japanese text

Then turn the right knob 3 times until you see OK

Then save and exit

Enjoy

Lien vers le commentaire
Partager sur d’autres sites

12 minutes ago, Onkel said:

Turn the left knob 3 times until it says OK

Then press start as far as I know

Not sure, use google translate on your phone to take a picture and translate the Japanese text

Then turn the right knob 3 times until you see OK

Then save and exit

Enjoy

Thanks bro 

but actually I saw relevant posts that said the same thing as yours, and I did exactly what it said but nothing happened, there was no 'ok' or any instructions

Lien vers le commentaire
Partager sur d’autres sites

I was enjoying Valkyrie 120hz mode normally with KFC-2021062900 version.

 

I found the KFC-2021083100 version today and overwrite the existing folder.

 

After running the asphysia server as before

 

I ran spice64.exe

 

 

 

The screen was displayed and the game could not be launched.

 

Does someone know a solution for this?

 

If you replace the DLL with the existing KFC-2021062900 file, it will run normally in Valkyrie 120hz mode.

 

Added new songs are also available.

 

However, NEAR & NOAH Nemesys Crew is not available.

 

An additional element, the decimal point gauge, cannot be displayed.

 

The version numbers shown in the screenshots have been arbitrarily modified ea3-config.xml.

 

The link address of KFC-2021083100 I found is as follows.

 

https://uptobox.com/mb36e8f6mhs0

 

I expect quick solutions from talented people.

 

thank you.

20210831error2.png

Lien vers le commentaire
Partager sur d’autres sites

1 hour ago, emuemuring said:

I expect quick solutions from talented people.

Do you think?

 

1 hour ago, emuemuring said:

However, NEAR & NOAH Nemesys Crew are* not available.

You can try editing the SDVX plugin to add that feature, make sure to familiar yourself with at least XML and Typescript/Javascript smh.

As well you can ask in the 1cc for another solution

Modifié par Winberhouls
Lien vers le commentaire
Partager sur d’autres sites

Il y a 3 heures, emuemuring a dit :

I was enjoying Valkyrie 120hz mode normally with KFC-2021062900 version.

 

I found the KFC-2021083100 version today and overwrite the existing folder.

 

After running the asphysia server as before

 

I ran spice64.exe

 

 

 

The screen was displayed and the game could not be launched.

 

Does someone know a solution for this?

 

If you replace the DLL with the existing KFC-2021062900 file, it will run normally in Valkyrie 120hz mode.

 

Added new songs are also available.

 

However, NEAR & NOAH Nemesys Crew is not available.

 

An additional element, the decimal point gauge, cannot be displayed.

 

The version numbers shown in the screenshots have been arbitrarily modified ea3-config.xml.

 

The link address of KFC-2021083100 I found is as follows.

 

https://uptobox.com/mb36e8f6mhs0

 

I expect quick solutions from talented people.

 

thank you.

20210831error2.png

The KFC-2021083100 soudvoltex.dll file was modified with a hex editor and the Valkyrie mode was successful.

 

After operation, NEAR & NOAH can also be selected.

 

But there is one fatal problem.

 

If you try to access the card again after playing any song and saving it

 

Unable to start the game with an error.

 

The result is the same whether you use the old card or the new card.

 

If an error occurs after playing with the old card, even if you change the soundvoltex.dll file to the old one

 

Still getting an error and can't start, so back up your asphyxia save data and card number first.

 

It seems that this problem cannot be solved unless the SDVX Plugin is updated.

 

It cannot be used normally only by modifying the DLL.

 

Hope someone can solve it.

0831error.png

Lien vers le commentaire
Partager sur d’autres sites

1 hour ago, emuemuring said:

The KFC-2021083100 soudvoltex.dll file was modified with a hex editor and the Valkyrie mode was successful.

 

After operation, NEAR & NOAH can also be selected.

 

But there is one fatal problem.

 

If you try to access the card again after playing any song and saving it

 

Unable to start the game with an error.

 

The result is the same whether you use the old card or the new card.

 

If an error occurs after playing with the old card, even if you change the soundvoltex.dll file to the old one

 

Still getting an error and can't start, so back up your asphyxia save data and card number first.

 

It seems that this problem cannot be solved unless the SDVX Plugin is updated.

 

It cannot be used normally only by modifying the DLL.

 

Hope someone can solve it.

0831error.png

turn on WASAPI with new dll will force the game stop immediately (still figure out how to fix this)

I am already have the address of WASAPI

 

I still trying to find: Turn on Valkyries(maybe it changed, maybe not), 120hz, Disable power change(cause the CPU usage 100% when running), Disable Minitor Change(I don't know what is this mean). I hope someone can help with these, I am still try to find all them. I am very appreciated your kindness.
 

1 hour ago, mangotoast said:

Hi. I have an issue with asphyxia i guess. i keep getting a "Error: kencode failed: parsing error at 'response.game.blaster_count' " and in game it says servers are busy

Re-install asphyxia is now the only way to solve this.

Lien vers le commentaire
Partager sur d’autres sites

Il y a 12 heures, emuemuring a dit :

The KFC-2021083100 soudvoltex.dll file was modified with a hex editor and the Valkyrie mode was successful.

 

After operation, NEAR & NOAH can also be selected.

 

But there is one fatal problem.

 

If you try to access the card again after playing any song and saving it

 

Unable to start the game with an error.

 

The result is the same whether you use the old card or the new card.

 

If an error occurs after playing with the old card, even if you change the soundvoltex.dll file to the old one

 

Still getting an error and can't start, so back up your asphyxia save data and card number first.

 

It seems that this problem cannot be solved unless the SDVX Plugin is updated.

 

It cannot be used normally only by modifying the DLL.

 

Hope someone can solve it.

0831error.png

I am using a translator

 

I want an edit file KFC-2021083100 soudvoltex.dll

can you provide the edit file?

Lien vers le commentaire
Partager sur d’autres sites

On 9/11/2021 at 10:59, NeroNEro said:

Guys, does anyone know how to turn on the Valkyrie Effect?

Download the patched dll here:

https://drive.google.com/file/d/16UKDs63SjaqT_BD3l-WuW16b4AtJlJEq/view?usp=sharing

 

just change the name back to soundvoltex.dll and in contents/props/ea3-config.xml change spec line to G.

Lien vers le commentaire
Partager sur d’autres sites

Veuillez vous connecter pour commenter

Vous pourrez laisser un commentaire après vous êtes connecté.



Connectez-vous maintenant
×
×
  • CrĂ©er...