Aller au contenu

[Arcade PC] SDVX Vivid Wave


adonis495

Messages recommandés

46 minutes ago, kira2690 said:

can you reupload the pic?

<?xml version='1.0' encoding='UTF-8'?>
<ea3>
    <id>
        <pcbid __type="str">00010203040506070809</pcbid>
        <hardid __type="str">00010203040506070809</hardid>
    </id>
    <soft>
        <model __type="str">KFC</model>
        <dest __type="str">K</dest>  replace K with other letters 
        <spec __type="str">A</spec>
        <rev __type="str">A</rev>
        <ext __type="str">2021060802</ext>

Lien vers le commentaire
Partager sur d’autres sites

il y a 34 minutes, 123456778 a dit :

as I know...you can't run Valkyrie Mode smoothly with monitors below 120hz

Even though I'm using a 144hz monitor, I can feel the stuttering very intermittently. It's a 1660Ti, but it doesn't seem to be a problem with the specifications, is there a solution?

 

Other than that everything is fine. When playing with the keyboard in Valkyrie mode, the knob response speed is better than in normal mode.

Lien vers le commentaire
Partager sur d’autres sites

1 minute ago, emuemuring said:

Even though I'm using a 144hz monitor, I can feel the stuttering very intermittently. It's a 1660Ti, but it doesn't seem to be a problem with the specifications, is there a solution?

 

Other than that everything is fine. When playing with the keyboard in Valkyrie mode, the knob response speed is better than in normal mode.

are you running the game in Windows Mode? if it so...try to run in Fullscreen to see what is happen then (if you tried both and still see the same problem then...It is the game problem, as I have watched many EXG livestream and see things like...BUTTONS are a little bit far away but if you press TOO EARLY and get ERROR it will disappear  immediately < maybe this is your problem).

I am using 2021060802 DLL file and all of the address have change: like...you cant use previous patch, and I can't "SHARED WASAPI" but the lasers and buttons working fine I haven't seen any problem from them yet, buttons, lasers, and long notes are fitly well as I press on keyboard (haven't tried on controller yet)

Lien vers le commentaire
Partager sur d’autres sites

il y a 14 minutes, 123456778 a dit :

are you running the game in Windows Mode? if it so...try to run in Fullscreen to see what is happen then (if you tried both and still see the same problem then...It is the game problem, as I have watched many EXG livestream and see things like...BUTTONS are a little bit far away but if you press TOO EARLY and get ERROR it will disappear  immediately < maybe this is your problem).

I am using 2021060802 DLL file and all of the address have change: like...you cant use previous patch, and I can't "SHARED WASAPI" but the lasers and buttons working fine I haven't seen any problem from them yet, buttons, lasers, and long notes are fitly well as I press on keyboard (haven't tried on controller yet)

I'm enjoying it in full screen. While playing the song, the GeForce fps counter displays between 118 and 120, but there is a slight lag. It's not a big problem, but I posted it to see if it could reduce even a small lag. Thanks for the reply.

Lien vers le commentaire
Partager sur d’autres sites

With the help of the people here, Exceed Gear was successful. However, this upgrade to the Valkryie Model caused a new problem. I modified the dll file using the editor and changed the F of the ea3 file to G. When I run a specetool, two windows pop up and then turn off after a few seconds. I will attach the log image below.

log.jpg

Modifié par G1park
Lien vers le commentaire
Partager sur d’autres sites

2 hours ago, G1park said:

With the help of the people here, Exceed Gear was successful. However, this upgrade to the Valkryie Model caused a new problem. I modified the dll file using the editor and changed the F of the ea3 file to G. When I run a specetool, two windows pop up and then turn off after a few seconds. I will attach the log image below.

log.jpg

F signal error = turn off camera in spice cfg

Lien vers le commentaire
Partager sur d’autres sites

18 hours ago, 1NGAN said:

<?xml version='1.0' encoding='UTF-8'?>
<ea3>
    <id>
        <pcbid __type="str">00010203040506070809</pcbid>
        <hardid __type="str">00010203040506070809</hardid>
    </id>
    <soft>
        <model __type="str">KFC</model>
        <dest __type="str">K</dest>  replace K with other letters 
        <spec __type="str">A</spec>
        <rev __type="str">A</rev>
        <ext __type="str">2021060802</ext>

Many thanks

Lien vers le commentaire
Partager sur d’autres sites

4 minutes ago, G1park said:

I already turned off the camera. If I don't change the F of the ea3 file to G or H, it's not Valkyrie mode, but it works normally.

Are you using may version or jun version?
and did you edited ea3 xml?

 

Lien vers le commentaire
Partager sur d’autres sites

19 minutes ago, G1park said:

I'm using the KFC-2021060802 version and if I edit the ea3 xml for the Valkyrie model, the game won't turn on.

06이랑 05의 soundvoltex.dll의 구조가 달라서 05버전의 offset 이 먹히지 않습니다.

지금 valk로 돌리실 꺼면 05버전을 쓰세요

Lien vers le commentaire
Partager sur d’autres sites

il y a 14 minutes, 1NGAN a dit :

06이랑 05의 soundvoltex.dll의 구조가 달라서 05버전의 offset 이 먹히지 않습니다.

지금 valk로 돌리실 꺼면 05버전을 쓰세요

근데 지금 05 돌려보니까 똑같네요ㅠㅠ 스파이스툴 설정에서 윈도우모드 끄면 오류 없이 켜지는데 화면이 안나와서 플레이는 못하더라구요.. 윈도우 모드로 켜고 실행하면 주 모니터에 창 두개가 다 뜨고 좀 있다가 바로 꺼져버리는데 해결하긴 힘들것 같아요ㅠㅠ

Lien vers le commentaire
Partager sur d’autres sites

1 minute ago, G1park said:

근데 지금 05 돌려보니까 똑같네요ㅠㅠ 스파이스툴 설정에서 윈도우모드 끄면 오류 없이 켜지는데 화면이 안나와서 플레이는 못하더라구요.. 윈도우 모드로 켜고 실행하면 주 모니터에 창 두개가 다 뜨고 좀 있다가 바로 꺼져버리는데 해결하긴 힘들것 같아요ㅠㅠ

그럼 모니터 하나를 뽑고 실행해 봅시다.

Lien vers le commentaire
Partager sur d’autres sites

il y a 36 minutes, 1NGAN a dit :

그럼 모니터 하나를 뽑고 실행해 봅시다.

해결 됐어요! 보조모니터 뺐다 끼우는걸 배치파일로 만들어야겠네요. 감사합니다! 

근데 발키리 모델 오면서 카드는 똑같은걸로 했는데도 기록이 날라갔네요ㅠㅠ

Modifié par G1park
Lien vers le commentaire
Partager sur d’autres sites

On 6/25/2021 at 10:00 PM, G1park said:

해결 됐어요! 보조모니터 뺐다 끼우는걸 배치파일로 만들어야겠네요. 감사합니다! 

근데 발키리 모델 오면서 카드는 똑같은걸로 했는데도 기록이 날라갔네요ㅠㅠ

세이브 데이터는 asphyxia에 savedata폴더 에 있습니다
옮기시면 됩니다

Modifié par 1NGAN
Lien vers le commentaire
Partager sur d’autres sites

Here are few tips for valk mode on 21060802 ver.

A reference to the previous version is needed to find the adress.

Prev Version 2105xx

valk mode

offset : 0x3f1bd5 off : 0x87 0x05 on : 0x47 0x0c

120Hz Support

offset : 0x6fc0be off : 0x4e on : 0x5e

Search and copy surrounding values.

Because unless it's completely new development, the value of the previous setting will be maintaned and only the adress will change.

on 21051802 version dll

found on 3f1bd5 / 00 00 48 8D 15 87 05 : valk mode

found on 6fc0be / 49 40 00 00 00 00 00 00 4E : 120Hz Support

copy that values and Search all with All direction.

then you'll be found the only result.

then change the values referring to the changes above.

Modding done!

(I found these values on 3f37c5, 70085e. based on 21060802 with dll patched one)

also other modifications are the same this way

 

I don't know if anyone need it, but i'll share the edited file.

https://mega.nz/file/MQQRhKZb#DXDZ2SiMpfv5vgsfh8dHcwYJ-n7ii0axRPCbkyedCNE

 

Have fun.

Modifié par Pineapple12
Lien vers le commentaire
Partager sur d’autres sites

12 minutes ago, Pinkhobo said:

Ive done this but i still have that same error

I don't know if this will help.

https://www.computerbase.de/downloads/systemtools/all-in-one-runtimes/

using this AIO Runtimes to install all runtimes.

and...

check your folder

right click your contents folder - properties - In General tabs -> Attributes : Read-Only.

If the rectangle is filled or unchecked, there is no problem

but click to uncheck, then OK to set the remove read-only property again.

Modifié par Pineapple12
Lien vers le commentaire
Partager sur d’autres sites

2 minutes ago, Pineapple12 said:

I don't know if this will help.

https://www.computerbase.de/downloads/systemtools/all-in-one-runtimes/

using this AIO Runtimes to install all runtimes.

and...

check your folder

right click your contents folder - properties - In General tabs -> Attributes : Read-Only.

If the rectangle is filled or unchecked, there is no problem

but click to uncheck, then set and OK to set the remove read-only property again.

Everytime i uncheck the read only box and apply then ok, i check the properties again and it automatically sets itself to read only again, like wtf??

Lien vers le commentaire
Partager sur d’autres sites

6 minutes ago, Pinkhobo said:

Everytime i uncheck the read only box and apply then ok, i check the properties again and it automatically sets itself to read only again, like wtf??

try to move sdvx folder to the root dir,

and run that program in the github address 

or just reinstall the sdvx
 

Modifié par 1NGAN
Lien vers le commentaire
Partager sur d’autres sites

Veuillez vous connecter pour commenter

Vous pourrez laisser un commentaire après vous êtes connecté.



Connectez-vous maintenant
×
×
  • Créer...