ginzu Posté(e) le 28 juin 2020 Posté(e) le 28 juin 2020 (modifié) Salut @oroborus77, Bah dit donc, tu ne chômes jamais. Bravo !  J'ai jamais testé ton pack car 1) j'ai une connexion de merde. 2) j'ai même pas le temps de faire tout ce que je dois faire de mon côté.  Par contre c'est cool continue. J'aimerais trouver le temps de tester ton partage rpcs3.. On va voir si j'arrive à placer ça quelque part dans mon emploi du temps.  Modifié le 28 juin 2020 par ginzu 1
Scheang Posté(e) le 28 juin 2020 Posté(e) le 28 juin 2020 2 hours ago, Scheang said: Hi. Any chance there's a video for getting the ps2 games working? I can't seem to get the wii mote to respond to the emulator. Something step by step perhaps? I know there's a brief setup txt in the pack, but it didn't seem to help. Plus I've never used nuvee before.  thx I finally got the buttons on the wii mote to register but now there's no crosshair and it's firing all over the screen. I can't point the gun.
ginzu PostĂ©(e) le 29 juin 2020 PostĂ©(e) le 29 juin 2020 Il y a 11 heures, Scheang a dit : I finally got the buttons on the wii mote to register but now there's no crosshair and it's firing all over the screen. I can't point the gun. Personnaly, I am playing with the mayflash dolphin bar using mode 2. I am using nuvee plugin and you must do the calibration before playing the game. Works very good but when using a mouse you will not have any crosshair on the screen. There is another solution if you absolutely need to have crosshair: but it's only working for one player. It's called mouse Patcher. In this case, you will not need nuvee plugin. I have tested it but, I didn't managed to make it work correctly when using my wiimotes as mouse or even as pads using touchmote' software.Â
oroborus77 Posté(e) le 29 juin 2020 Auteur Posté(e) le 29 juin 2020 Okay, I'm done setting up RocketLauncher with RetroFE. There have been quite a few changes to the emulators and the folder structure, so I'm not sure I can make it a simple addon that you could easily add. The size of the addon would be quite substantial because it would include emulators, roms and new files in addition to Rocketlauncher of course (which weighs only 250mb), so you might as well redo a full pack? - Otherwise it is all well and good but what would it be used for exactly ?! - Adding RocketLauncher (RL) allows you to add and choose the viewfinder / crosshair of your choice to games that do not have one (or are difficult to configure). - Easily add Bezels for 4/3 games. - Use the "Esc" key to quit all games (except PC games, use "F1 + Esc". - Create individual setups for each game, make it easier to run several software programs at the same time, and so on. - I also added the Arcade / Naomi version of Ninja Assault. - Gunfighter 1 Psone also added. - Time Crisis Razing Storm also. (Time Crisis 4 does not seem to work or needs certain parameters.) The big advantage is the principle of adding crosshairs and being able to remove it at any time ("caps / lock" key) [Warning the script does not always seem to work to make the cursor reappear, so use the "Caps / Lock" key if you want to make the viewfinder disappear only. I didn’t make a presentation video because the time wasn’t there. But it is basically the same as the old pack, a little more functional. If you already have LightGuns Crisis, you play without viewfinder and that pressing Alt + F4 does not irritate you too much, all that should not interest you masses ... In short I think posted these coming days a TEST Addon for those who want to test this while keeping in mind that the installation of the addon will modify the structure of RetroFE (games folder, launchers etc ..) so to be clear: - If you want to test the addon, imperatively make a backup of LGC before. (you never know ...) I will try to provide backups of important files in the archive.  As planned this is the RL addon for test purpose.  TEST RocketLauncher addon + games,emulators files. ( around 45gb ) Make a backup of your lightGuns Crisis Folder is highly recomended.  Follow the readme included for the installation. Issue :  - missing some fade backgrounds (ps1)  If you encounter problems with it contact me via PM only or Emuline's Discord. I will not help with this on this thread as it is test status. Thank you to give feedback.  https://1fichier.com/?xgqwh393cu4xbab6he20 https://1fichier.com/?ldyos8bhyou5umyq2vjj https://1fichier.com/?9rvpje00tu00l4se9wxs https://1fichier.com/?wmfdhgd2c91m5e4dwppx https://1fichier.com/?s1q1d83unwuv1srof08t https://1fichier.com/?l4vpo2cvfuh8rc7xjdpv https://1fichier.com/?551cvnmgxzv093q1zaag https://1fichier.com/?rfx4laniihob8h2u5f2x https://1fichier.com/?5kwqcvxqw49t6lpxh62b  https://uptobox.com/mvur2dn7ibp4 https://uptobox.com/etvzb7mlq2li https://uptobox.com/20nj2b6mu66r https://uptobox.com/lqtxainjjc4t https://uptobox.com/chldzyiok67d https://uptobox.com/1qr97kibq6r8 https://uptobox.com/2adrge24x5e1 https://uptobox.com/kfc2z6ehpepf https://uptobox.com/0o9vz3k157s3    1
Scheang Posté(e) le 29 juin 2020 Posté(e) le 29 juin 2020 11 hours ago, ginzu said: Personnaly, I am playing with the mayflash dolphin bar using mode 2. I am using nuvee plugin and you must do the calibration before playing the game. Works very good but when using a mouse you will not have any crosshair on the screen. There is another solution if you absolutely need to have crosshair: but it's only working for one player. It's called mouse Patcher. In this case, you will not need nuvee plugin. I have tested it but, I didn't managed to make it work correctly when using my wiimotes as mouse or even as pads using touchmote 'software. Any chance you could post screen shots of your setup for the controls? Lilypad and Nuvee in particular. I've been playing with those settings in the emulator and I think it might be that I'm just missing a checkmark somewhere. Like I said, the trigger fires, but the pointer seems to be jumping around the outside of the gaming screen. When I try to  aim inside, the pointer disappears. ps. I think you misunderstood. I'm using the wii mote, not a mouse. I think we have the same setup.
ginzu Posté(e) le 30 juin 2020 Posté(e) le 30 juin 2020 Hi!       Hope that help! And you know what? MousePatcher is working perfectly using wiimotes! i will do tutorial on my youtube channel as soon as possible... i am too busy at the moment..... (and no i am not misunderstood you don't worry about that, i know you are using wiimotes).      1
Ryogun Posté(e) le 30 juin 2020 Posté(e) le 30 juin 2020 Il y a 15 heures, oroborus77 a dit :   Révéler le contenu masqué   Okay, I'm done setting up RocketLauncher with RetroFE. There have been quite a few changes to the emulators and the folder structure, so I'm not sure I can make it a simple addon that you could easily add. The size of the addon would be quite substantial because it would include emulators, roms and new files in addition to Rocketlauncher of course (which weighs only 250mb), so you might as well redo a full pack? - Otherwise it is all well and good but what would it be used for exactly ?! - Adding RocketLauncher (RL) allows you to add and choose the viewfinder / crosshair of your choice to games that do not have one (or are difficult to configure). - Easily add Bezels for 4/3 games. - Use the "Esc" key to quit all games (except PC games, use "F1 + Esc". - Create individual setups for each game, make it easier to run several software programs at the same time, and so on. - I also added the Arcade / Naomi version of Ninja Assault. - Gunfighter 1 Psone also added. - Time Crisis Razing Storm also. (Time Crisis 4 does not seem to work or needs certain parameters.) The big advantage is the principle of adding crosshairs and being able to remove it at any time ("caps / lock" key) [Warning the script does not always seem to work to make the cursor reappear, so use the "Caps / Lock" key if you want to make the viewfinder disappear only. I didn’t make a presentation video because the time wasn’t there. But it is basically the same as the old pack, a little more functional. If you already have LightGuns Crisis, you play without viewfinder and that pressing Alt + F4 does not irritate you too much, all that should not interest you masses ... In short I think posted these coming days a TEST Addon for those who want to test this while keeping in mind that the installation of the addon will modify the structure of RetroFE (games folder, launchers etc ..) so to be clear: - If you want to test the addon, imperatively make a backup of LGC before. (you never know ...) I will try to provide backups of important files in the archive.     As planned this is the RL addon for test purpose.  TEST RocketLauncher addon + games,emulators files. ( around 45gb ) Make a backup of your lightGuns Crisis Folder is highly recomended.  Follow the readme included for the installation. Issue :  - missing some fade backgrounds (ps1)  If you encounter problems with it contact me via PM only or Emuline's Discord. I will not help with this on this thread as it is test status. Thank you to give feedback.  https://1fichier.com/?xgqwh393cu4xbab6he20 https://1fichier.com/?ldyos8bhyou5umyq2vjj https://1fichier.com/?9rvpje00tu00l4se9wxs https://1fichier.com/?wmfdhgd2c91m5e4dwppx https://1fichier.com/?s1q1d83unwuv1srof08t https://1fichier.com/?l4vpo2cvfuh8rc7xjdpv https://1fichier.com/?551cvnmgxzv093q1zaag https://1fichier.com/?rfx4laniihob8h2u5f2x https://1fichier.com/?5kwqcvxqw49t6lpxh62b  https://uptobox.com/mvur2dn7ibp4 https://uptobox.com/etvzb7mlq2li https://uptobox.com/20nj2b6mu66r https://uptobox.com/lqtxainjjc4t https://uptobox.com/chldzyiok67d https://uptobox.com/1qr97kibq6r8 https://uptobox.com/2adrge24x5e1 https://uptobox.com/kfc2z6ehpepf https://uptobox.com/0o9vz3k157s3   Salut, merci beaucoup pour l'addon ! Je vais le tester dans la semaine s
Scheang Posté(e) le 30 juin 2020 Posté(e) le 30 juin 2020 (modifié) 8 hours ago, ginzu said: Hi!       Hope that help! And you know what? MousePatcher is working perfectly using wiimotes! i will do tutorial on my youtube channel as soon as possible ... i am too busy at the moment .....  (and no i am not misunderstood you don't worry about that, i know you are using wiimotes).      Hi. That seems to have helped. The mouse cursor seems more stable, but now I can't get out of the Guncon2 calibration. It just keeps saying calibrate and shoot at the center. I shoot away, but it never changes. Also, I'm stuck in Windows mode. It's not full screen. I can see the Windows bar at top and bottom. Could that be why it's not allowing me to get past calibration?  This is super frustrating! Modifié le 30 juin 2020 par Scheang
ginzu PostĂ©(e) le 30 juin 2020 PostĂ©(e) le 30 juin 2020 Il y a 1 heure, Scheang a dit : Hi. That seems to have helped. The mouse cursor seems more stable, but now I can't get out of the Guncon2 calibration. It just keeps saying calibrate and shoot at the center. I shoot away, but it never changes. Also, I'm stuck in Windows mode. It's not full screen. I can see the Windows bar at top and bottom. Could that be why it's not allowing me to get past calibration?  This is super frustrating!  Did you try Alt+enter to go fullscreen?  Each time you want to play a game for the first time, you will have to select the correct name of the game in the drop-down list (see my last picture where I selected time crisis 2). Then the calibration checkbox must be checked too. (if you use only one wiimote, so check only one gun on to configure in the previous step or you will have to calibrate it too before being able de play. Beware: when this step will be done, you will have to alt+enter and return to nuvee plugin to uncheck this fucking box. If you don't you will have some bullets not fired correctly and this is absolutely not what we want when playing games like that. good luck!Â
Scheang Posté(e) le 30 juin 2020 Posté(e) le 30 juin 2020 3 hours ago, ginzu said:  Did you try Alt + enter to go fullscreen?  Each time you want to play a game for the first time, you will have to select the correct name of the game in the drop-down list (see my last picture where I selected time crisis 2). Then the calibration checkbox must be checked too. (if you use only one wiimote, so check only one gun on to configure in the previous step or you will have to calibrate it too before being able to play. Beware: when this step will be done, you will have to alt + enter and return to nuvee plugin to uncheck this fucking box. If you don't you will have some bullets not fired correctly and this is absolutely not what we want when playing games like that. good luck! Ok., It's back to full screen. The cursor moves around the guncon2 screen, but now the trigger won't respond! OMG this is ridiculous. Do you need to set anything in Pad 1 in Lilypad? If playing with 1 gun, do I need to have Guncon 2 set in Port 2 on the Controller types screen? Or can that say None? I have no idea why it's not firing now. It seems every time I change something, another thing stops working. (I appreciate the help btw)
ginzu PostĂ©(e) le 1 juillet 2020 PostĂ©(e) le 1 juillet 2020 Il y a 7 heures, Scheang a dit : Ok., It's back to full screen. The cursor moves around the guncon2 screen, but now the trigger won't respond! OMG this is ridiculous. Do you need to set anything in Pad 1 in Lilypad? If playing with 1 gun, do I need to have Guncon 2 set in Port 2 on the Controller types screen? Or can that say None? I have no idea why it's not firing now. It seems every time I change something, another thing stops working. (I appreciate the help btw)  But... Wait... Are you using mode 2 or mode 4 on the mayflash dolphin bar?  Â
Scheang Posté(e) le 1 juillet 2020 Posté(e) le 1 juillet 2020 (modifié) 14 hours ago, ginzu said:  But ... Wait ... Are you using mode 2 or mode 4 on the mayflash dolphin bar?   mode 2. And I only use one wii mote (for now at least)  Mode 2 works fine in Mame and Tecknoparrot. Is that wrong? Does it have to be 4 with PS2 emulation? Modifié le 1 juillet 2020 par Scheang
Scheang Posté(e) le 1 juillet 2020 Posté(e) le 1 juillet 2020 Mode 2 works fine in Mame and Tecknoparrot. Is that wrong? Does it have to be 4 with PS2 emulation?
ginzu PostĂ©(e) le 1 juillet 2020 PostĂ©(e) le 1 juillet 2020 Il y a 2 heures, Scheang a dit : Mode 2 works fine in Mame and Tecknoparrot. Is that wrong? Does it have to be 4 with PS2 emulation?  No, it's fine. I play with 2 wiimotes and I use 2 dolphin bar (mode 2)..  Last time, I try mode 4 but my cursor was moving very badly.Â
ginzu PostĂ©(e) le 2 juillet 2020 PostĂ©(e) le 2 juillet 2020 Salut @oroborus77, Je viens de tester ton rpcs3 avec Razing storm J'avais pas compris qu'on pouvait aussi jouer Ă Dead Stom Pirates!  Par contre voilĂ mon compte rendu après quelques tests: - Chez moi mon 3.2Ghz est Ă la ramasse et sature à 100% d'utilisations en permanence.... - C'est donc pas jouable pour moi.... Mais, j'ai pu quand mĂŞme jouer Ă Razing storm et Dead Storm Pirates. Time crisis 4 ne se lance pas non plus chez moi. Dommage, il faudra encore attendre ou alors je dois aller m'acheter une bĂŞte de course si je veux pouvoir y jouer....... Â
Scheang PostĂ©(e) le 2 juillet 2020 PostĂ©(e) le 2 juillet 2020 Does Sega model 3 have anything to do with the command prompt when launching games? I'm having issues with the controls for Ocean Hunter and LA MAchine guns. Controls won't work on my gaming PC (which I can't open a command prompt on for some strange reason.) Yet on my other PC, the mouse works fine and I don't have a command prompt issue on that PC. I also don't have my wii mote on this computer either, but if the mouse responds, the wii mote should too.Â
oroborus77 Posté(e) le 3 juillet 2020 Auteur Posté(e) le 3 juillet 2020 Il y a 11 heures, ginzu a dit : Salut @oroborus77, Je viens de tester ton rpcs3 avec Razing storm J'avais pas compris qu'on pouvait aussi jouer à Dead Stom Pirates!  Par contre voilà mon compte rendu après quelques tests: - Chez moi mon 3.2Ghz est à la ramasse et sature à 100% d'utilisations en permanence.... - C'est donc pas jouable pour moi.... Mais, j'ai pu quand même jouer à Razing storm et Dead Storm Pirates. Time crisis 4 ne se lance pas non plus chez moi. Dommage, il faudra encore attendre ou alors je dois aller m'acheter une bête de course si je veux pouvoir y jouer.......  Je n ai pas une bête de course, loin de là , et je peux y jouer dans des conditions potables (15 -20 fps pendant 3secondes lors des passages chargés) sinon le reste du temps c est du 55 -60fps. Le son saute pas mal chez moi,, ça doit être un manque de ram ou le buffer audio à régler.  Essayes en openGL peut être plutôt que vulkan ? dépend de ta config. I7 6800hq 970gtm 16gb ram
ginzu Posté(e) le 3 juillet 2020 Posté(e) le 3 juillet 2020 (modifié) Le 03/07/2020 à 08:29, oroborus77 a dit : Je n ai pas une bête de course, loin de là , et je peux y jouer dans des conditions potables (15 -20 fps pendant 3secondes lors des passages chargés) sinon le reste du temps c est du 55 -60fps. Le son saute pas mal chez moi,, ça doit être un manque de ram ou le buffer audio à régler.  Essayes en openGL peut être plutôt que vulkan ? dépend de ta config. I7 6800hq 970gtm 16gb ram  Salut, En fait, cet emu nécessite une conf un peu plus costaud : CPU : soit un 4 coeurs avec Hyper Threading (moi j'ai pas l'hyper threading ... ) soit au moins un CPU à 6 cores..... Je viens d'aller voir les prix car ça fait longtemps que j'ai rien acheter coté matos et ................. je pleur toujours autant.....   Ton CPU est un 6 cores avec 12 threads, je suis étonné que tu me dise que tu ai des ralentissements .......   Modifié le 4 juillet 2020 par ginzu
oroborus77 Posté(e) le 3 juillet 2020 Auteur Posté(e) le 3 juillet 2020 Il y a 1 heure, ginzu a dit :  Salut, En fait, cet emu nécessite une conf un peu plus costaud : CPU : soit un 4 coeurs avec Hyper Threading (moi j'ai pas l'hyper threading ... ) soit au moins un CPU à 6 cores..... Je viens d'aller voir les pris car ça fait longtemps que j'ai rien acheter coté matos et ................. je pleur toujours autant.....   Ton CPU est un 6 cores avec 12 threads, je suis étonné que tu me dise que tu ai des ralentissements .......   Malheureusement le CPU ne fait pas tout. Ma carte graphique est très limite et faut pas oublier l optimisation des émulateurs. Des jeux pcsx2 peuvent également ramer pour ma part malgré ma config. Faut jouer avec les paramètres vidéos de l émulateurs pour avoir de bons résultats.
Scheang Posté(e) le 3 juillet 2020 Posté(e) le 3 juillet 2020 Does anyone know how to center the screen on the PS2 emulator without messing up the controls? I tried a fresh install because I couldn't get the controls to work for Ocean Hunter and LA Machineguns. The game screen is way off to the right and it's set at 1920X1080, however, the wii mote gun works. When I change the resolution, the screen centers, but the controls stop working! I tried a couple different resolutions and got the same result.
ginzu Posté(e) le 4 juillet 2020 Posté(e) le 4 juillet 2020 Il y a 13 heures, Scheang a dit : Does anyone know how to center the screen on the PS2 emulator without messing up the controls? I tried a fresh install because I couldn't get the controls to work for Ocean Hunter and LA Machineguns. The game screen is way off to the right and it's set at 1920X1080, however, the wii mote gun works. When I change the resolution, the screen centers, but the controls stop working! I tried a couple different resolutions and got the same result. Hi, I don't really understand your problem but you talk about the PS2 emulator then you talk about Ocean Hunter (emulator model 3) ... I think you mean Model3 ... Have you tried the emulator archive download link in the description of my youtube video for this game. My setting is for a 1920 * 1080 resolution screen by default (the calibration is done for the 4 games for this resolution) (Supermodel.ini file) ... I never have to center the screen to play any default emulator .....
Scheang Posté(e) le 4 juillet 2020 Posté(e) le 4 juillet 2020 (modifié) 4 hours ago, ginzu said: Hi, I don't really understand your problem but you talk about the PS2 emulator then you talk about Ocean Hunter (emulator model 3) ... I think you mean Model3 ... Have you tried the emulator archive download link in the description of my youtube video for this game. My setting is for a 1920 * 1080 resolution screen by default (the calibration is done for the 4 games for this resolution) (Supermodel.ini file) ... I never have to center the screen to play any default emulator ..... Sorry, You're right. Sega Model 3 (I'm having control issues with PS2 as well). Anyway, I downloaded the emulator archive from your Youtube video. I opened Ocenhunter outside of Supermodel (the green H). It's the exact same issue. The screen is off center (I can see a little more than half), but the controls work. I didn't change any settings. I'm going to try launching Supermodel and try changing settings and see if that works.   Update  Exact same problem. As soon as I change to a lower resolution, the screen centers, but the controls stop responding. What's worse, when I go back to 1920x1080, the controls stop responding! What is going on? To get the controls responding again, I have to delete everything, reinstall it and launch it again from a fresh install. Something keeps changing.  Update 2  As soon as I make a single change within the emulator, whatever it is (even changing the directory to point to Roms), the controls stop responding. How can this affect the controls? Modifié le 4 juillet 2020 par Scheang
eliory Posté(e) le 4 juillet 2020 Posté(e) le 4 juillet 2020 how can I close the app without using taskbar?
ginzu PostĂ©(e) le 4 juillet 2020 PostĂ©(e) le 4 juillet 2020 Il y a 5 heures, Scheang a dit : Sorry, You're right. Sega Model 3 (I'm having control issues with PS2 as well). Anyway, I downloaded the emulator archive from your Youtube video. I opened Ocenhunter outside of Supermodel (the green H). It's the exact same issue. The screen is off center (I can see a little more than half), but the controls work. I didn't change any settings. I'm going to try launching Supermodel and try changing settings and see if that works.   Update  Exact same problem. As soon as I change to a lower resolution, the screen centers, but the controls stop responding. What's worse, when I go back to 1920x1080, the controls stop responding! What is going on? To get the controls responding again, I have to delete everything, reinstall it and launch it again from a fresh install. Something keeps changing.  Update 2  As soon as I make a single change within the emulator, whatever it is (even changing the directory to point to Roms), the controls stop responding. How can this affect the controls?  I don't know what's going on. But it's like it's something relative to your hardware..  Do you have more than one monitor? What kind of dolphin bar do you use?  Do you have some other mices peripheral (Bluetooth or other?) that are connected near your gaming pc???  It is necessary to proceed by elimination. Â
ark216 Posté(e) le 4 juillet 2020 Posté(e) le 4 juillet 2020 On 6/30/2020 at 1:14 PM, ginzu said: Hi!       Hope that help! And you know what? MousePatcher is working perfectly using wiimotes! i will do tutorial on my youtube channel as soon as possible... i am too busy at the moment..... (and no i am not misunderstood you don't worry about that, i know you are using wiimotes).      @ginzu is there a possibility that you can play Time Crisis 2 and 3 and other good light guns games on PCSX2 using 2 wiimotes with a single Mayflash bar with mode 4? Is so then that would be terrific.
ginzu PostĂ©(e) le 4 juillet 2020 PostĂ©(e) le 4 juillet 2020 il y a 15 minutes, ark216 a dit : @ginzu is there a possibility that you can play Time Crisis 2 and 3 and other good light guns games on PCSX2 using 2 wiimotes with a single Mayflash bar with mode 4? Is so then that would be terrific.  @ark216, I already try that recently but I didn't managed to get it work in mode 4 using touchmote (cursors issue) but I must give another try as soon as possible. If god want, I will come back with new videos and stuffs I am working on next week. At the moment, I am not able to work on anything for personal reasons.Â
STF Posté(e) le 8 juillet 2020 Posté(e) le 8 juillet 2020 (modifié) Le 25/06/2020 à 14:43, oroborus77 a dit :  Apparemment la dernière version de rpcs3 semble à nouveau fonctionnelle avec le psmove.  J ai pû tester razing storm et dead storm pirates (venant de Time Crisis Razing Storm), la calibration s est bien passée et le jeu tourne plutôt bien en plein écran fenêtré. Le plein écran ne fonctionne qu avec la souris, la visée de l aimtrack bug lors du passage plein écran.  Par contre pas moyen de lancer Time Crisis 4..  Pour ceux qui veulent tester voici un pack avec l émulateur déjà configuré et time crisis razing storm. Encore une fois je n ai pas réussi à lance Time Crisis 4. à voir plus tard.      Infos: Le plein écran ne fonctionne qu avec la souris. La calibration doit être faite hors plein écran. Jouable à la souris. jouable avec l aimtrack 2 joueurs : pas testé.   Controles:  Start            = entrée X  (clavier)    = Croix Clique droit     = Valider dans les menus(et calibration) / lever le bouclier (ingame) Clique gauche = Shoot Clique gauche + clique droit + molette = Start Clique droit+ Clique gauche= Rond Clique droit + Molette = Triangle   Pour la calibration: après avoir terminé la calibration , faire (avec la souris de préférence j ai pas tésté des masses avec l aimtrack) Clique droit + molette puis Clique droit + Clique gauche pour quitter l écran de calibration.  __ https://uptobox.com/ilwi0jmvg2pg https://uptobox.com/9wsgo0am1p7a https://uptobox.com/3ekl8293na6d   https://1fichier.com/?q8sivs38wse9vwk63xac https://1fichier.com/?l4oo0mojpqbsod0g3g2g https://1fichier.com/?4kmb8so9p7mnla3b85ct  Salut oroborus77, J'ai téléchargé tes liens et je n'arrive pas à passer la calibration J'ai cet écran à la fin de la calibration la cible se déplace bien en suivant la souris Je fais clic droit + molette puis Clic droit + Clic gauche et je retourne au début de la calibration...  J'ai vu que Ginzu à réussi à jouer, donc c'est chez moi qu'il y a un bug...  Une idée du problème ? Merci  Edit En validant avec clavier [C] ca marche (Clic droit + Clic gauche ne fonctionne pas chez moi) problème résolu Modifié le 8 juillet 2020 par STF
ginzu PostĂ©(e) le 8 juillet 2020 PostĂ©(e) le 8 juillet 2020 Il y a 1 heure, STF a dit :  Salut oroborus77, J'ai tĂ©lĂ©chargĂ© tes liens et je n'arrive pas Ă passer la calibration J'ai cet Ă©cran Ă la fin de la calibration la cible se dĂ©place bien en suivant la souris Je fais clic droit + molette puis Clic droit + Clic gauche et je retourne au dĂ©but de la calibration...  J'ai vu que Ginzu Ă rĂ©ussi Ă jouer, donc c'est chez moi qu'il y a un bug...  Une idĂ©e du problème ? Merci  Edit En validant avec clavier [C] ca marche (Clic droit + Clic gauche ne fonctionne pas chez moi) problème rĂ©solu  Salut STF, oui j'avais du utiliser ma trackball pour pouvoir passer cet Ă©cran....Â
ark216 Posté(e) le 8 juillet 2020 Posté(e) le 8 juillet 2020 (modifié) Guys can you add a target cursor in Demul Light Gun games like Confidentional Mission, Lupin 3 The shooting etc? If so then how? @ginzu Modifié le 10 juillet 2020 par ark216
ark216 Posté(e) le 9 juillet 2020 Posté(e) le 9 juillet 2020 On 6/30/2020 at 1:14 PM, ginzu said: Hi!       Hope that help! And you know what? MousePatcher is working perfectly using wiimotes! i will do tutorial on my youtube channel as soon as possible ... i am too busy at the moment .....  (and no i am not misunderstood you don't worry about that, i know you are using wiimotes).      When are you doing a video on this PCSX2 one? I hope you also demonstrate this to be used in Mode 4 of Dolphin bar.
ginzu Posté(e) le 10 juillet 2020 Posté(e) le 10 juillet 2020 Il y a 6 heures, ark216 a dit : When are you doing a video on this PCSX2 one? I hope you also demonstrate this to be used in Mode 4 of Dolphin bar.  It's on my to-do list of course but I had a busy month and I am on something bigger too... Just hope I'll managed to do what I am doing. 1
ginzu PostĂ©(e) le 11 juillet 2020 PostĂ©(e) le 11 juillet 2020 Le 08/07/2020 Ă 21:44, ark216 a dit : Guys can you add a target cursor in Demul Light Gun games like Confidentional Mission, Lupin 3 The shooting etc? If so then how? @ginzu  I've heard that some people can change the in-game cursor for many emulator using rocket launcher. I don't know if it is easy to set up but I would like someone to explain how to do that too. Â
pablitox70 Posté(e) le 11 juillet 2020 Posté(e) le 11 juillet 2020 Il ‎08‎/‎07‎/‎2020 Alle 15:44, STF ha scritto:  Salut oroborus77, J'ai téléchargé tes liens et je n'arrive pas à passer la calibration J'ai cet écran à la fin de la calibration la cible se déplace bien en suivant la souris Je fais clic droit + molette puis Clic droit + Clic gauche et je retourne au début de la calibration...  J'ai vu que Ginzu à réussi à jouer, donc c'est chez moi qu'il y a un bug...  Une idée du problème ? Merci  Edit En validant avec clavier [C] ca marche (Clic droit + Clic gauche ne fonctionne pas chez moi) problème résolu I also can't get out of the aimtrack calibration, neither with the combination of the gun keys nor with any keyboard key ... any ideas ?
ginzu Posté(e) le 11 juillet 2020 Posté(e) le 11 juillet 2020 (modifié) il y a 44 minutes, pablitox70 a dit : I also can't get out of the aimtrack calibration, neither with the combination of the gun keys nor with any keyboard key ... any ideas ? Use a classic mouse and do: Middle click+ right click Then Right click + left click. I know, this is weird... Modifié le 11 juillet 2020 par ginzu
Scheang PostĂ©(e) le 11 juillet 2020 PostĂ©(e) le 11 juillet 2020 Hi. Aliens extermination issues;  I have no cursor showing (using wii mote as in video tut). When I go into calibration in the game, the trigger registers however the up, down, left, right numbers will not change. All I can do is pull trigger and it saves the values. I see in the video that the numbers change to 0, 65535, 0, 65535. Not mine. And, like I said, there is no cursor displaying during calibration as in the video. When I enter the game, the trigger and flamethrower registers and depletes my ammo, but there's no cursor and no display of my gun shots or flame thrower.  Someone help!Â
ginzu PostĂ©(e) le 12 juillet 2020 PostĂ©(e) le 12 juillet 2020 Il y a 7 heures, Scheang a dit : Hi. Aliens extermination issues;  I have no cursor showing (using wii mote as in video tut). When I go into calibration in the game, the trigger registers however the up, down, left, right numbers will not change. All I can do is pull trigger and it saves the values. I see in the video that the numbers change to 0, 65535, 0, 65535. Not mine. And, like I said, there is no cursor displaying during calibration as in the video. When I enter the game, the trigger and flamethrower registers and depletes my ammo, but there's no cursor and no display of my gun shots or flame thrower.  Someone help!  Solutions: For one player only: dolphinbar mayflash in mode 2 Use Mouse enabler.exe Use Alien dehasped.exe  Or  For one or 2 players: dolphinbar in mode 2 use demulshooter (with admin rights) Use Alien dehasped.exe  For one or 2 players: dolphinbar in mode 4 use demulshooter (with admin rights) Use touchmote (pad profile) Use Alien dehasped.exe  (from what I remember). Â
pablitox70 Posté(e) le 12 juillet 2020 Posté(e) le 12 juillet 2020 15 ore fa, ginzu ha scritto: Use a classic mouse and do: Middle click+ right click Then Right click + left click. I know, this is weird... Thank you ginzu, i will try
Messages recommandés
Veuillez vous connecter pour commenter
Vous pourrez laisser un commentaire après vous êtes connecté.
Connectez-vous maintenant