[TUTO] Initial D Stage Zero Arcade - how to setup and play (Nvidia & AMD Cards working)

[jumpy]

Thanks, but using TeknoParrot I have no issues with xbox pad, the issue is the network error...

[advarcher]

On 3/2/2021 at 12:25 PM, jumpy said:

Thanks, but using TeknoParrot I have no issues with xbox pad, the issue is the network error...

For Teknoparrot, make sure your aime's start.bat is running first then run the game via Teknoparrot. the AIME start.bat needs to be on while you play.
Dunno if it helps, but also try making an aime.txt file in your DEVICES folder and just throw 20 random numbers in there like "15243607981234567890"

Modifié le 4 mars 2021 par advarcher

[M1nhx]

On 19/02/2021 at 10:16 AM, bestekar said:

Update: After using the patcher on the web page any ip range seems to work. just make sure the last octet of your ip adress is matched under [netenv] addrSuffix=

 

So for example if the IP of A1 is 10.0.0.201 put [netenv] addrSuffix=201

You also need to change the [dns] default=10.0.0.201 and [keychip] subnet=10.0.0.0

accordingly.

Thank you for this, spent some time doing the updates (minime/segatools/patched files) and now can get shop vs mode enabled .... the only thing well it's a BIG thing - my keyboard strokes are now no longer responding so keys 1,2,3 and ENTER are no longer working making this game unusable, has anyone encountered anything unusual like this? your help is much appreciated 

[Lesteph25]

il y a 26 minutes, M1nhx a dit :

Thank you for this, spent some time doing the updates (minime/segatools/patched files) and now can get shop vs mode enabled .... the only thing well it's a BIG thing - my keyboard strokes are now no longer responding so keys 1,2,3 and ENTER are no longer working making this game unusable, has anyone encountered anything unusual like this? your help is much appreciated 

it must be one of the segatools file (idzhook.dll or idzio.dll)
if you run it via teknoparrot, then you have to assign them directly from teknoparrot

[bestekar]

3 hours ago, M1nhx said:

Thank you for this, spent some time doing the updates (minime/segatools/patched files) and now can get shop vs mode enabled .... the only thing well it's a BIG thing - my keyboard strokes are now no longer responding so keys 1,2,3 and ENTER are no longer working making this game unusable, has anyone encountered anything unusual like this? your help is much appreciated 

Again, you cant use the Sega Tools files from the teknoparrot folder. If you do,  1,2,3 + enter does not work anymore. You need to use the plain old Segatools v4. http://www.emuline.org/applications/core/interface/file/attachment.php?id=8257

Also dont use Zero launcher or Teknoparrot. I havent tested with Zero launcher so just launch using segatools v4 start.bat file (remember to edit the start.bat file for A1 and A2 before running it)

Modifié le 3 mars 2021 par bestekar

[M1nhx]

2 hours ago, Lesteph25 said:

it must be one of the segatools file (idzhook.dll or idzio.dll)
if you run it via teknoparrot, then you have to assign them directly from teknoparrot

This makes sense thanks! I’m running standalone but silly me downloaded the segatoolsTP fork!

[M1nhx]

19 minutes ago, bestekar said:

Again, you cant use the Sega Tools files from the teknoparrot folder. If you do,  1,2,3 + enter does not work anymore. You need to use Segatools v4.

Thanks for pointing this out! Thanks again.

Modifié le 3 mars 2021 par M1nhx

[M1nhx]

20 minutes ago, bestekar said:

Again, you cant use the Sega Tools files from the teknoparrot folder. If you do,  1,2,3 + enter does not work anymore. You need to use the plain old Segatools v4. http://www.emuline.org/applications/core/interface/file/attachment.php?id=8257

Also dont use Zero launcher or Teknoparrot. I havent tested with Zero launcher so just launch using segatools v4 start.bat file (remember to edit the start.bat file for A1 and A2 before running it)

Perfect thank you!

[jumpy]

Nope, not working for me, running from start.bat or TeknoParrot makes no difference. And I have to use latest SegaTools or game will not start...

[essoexpresso]

Hello! I have a problem with minime. When i run "start.bat" i get the following message: "NodeJS does not appear to be installed. Please install the lates LTS version".
But i've already had the latest version of NodeJS and by the way "start.bat" from "SDDF_1.31.00\app\package" works (but i have error 6401 anyway).
I use minime from "PLAGINS" arhive. I don't know what to do, i've already tried everything. Help me, please! What information can i give yet?

[gregaapplejuice]

thanks!

[M1nhx]

On 19/02/2021 at 6:32 AM, bestekar said:

I wasted a lot of time before I finally got the correct info needed to get multiplayer system link up and running on ID Zero. So to spare other people here for a headache that wants to play on VS LAN here are the steps you need to do. You cant launch the game using Teknoparrot if you want LAN VS support. Though If you use segatools v4 and minime v13 to launch the game you can get LAN VS working. Use this page to patch the 3 exe files: https://idas-zero-patcher.netlify.app/

 

Set IP on PC 1 to 192.168.158.1

Launch test mode go into game assignments and set to set number to A1. Set Seat Color to White (seat color setting might be optional)

 

Set IP on PC 2 to 192.168.158.2

Launch test mode go into game assignments and set to set number to A2. Set Seat Color to Yellow (seat color setting might be optional)

 

Now for the Segatools.ini settings (change the [io3] and [dinput] values to your type of controller this config works for Logitech G27)

On A1

 

[vfs]
amfs=     (set to your amfs directory)
appdata= (set to your appdata directory)

[dns]
default=192.168.158.1

[ds]
region=4
serialNo=AAVE-01A13998871

[netenv]
enable=1
addrSuffix=1

[keychip]
subnet=192.168.158.0
id=AAVE-01A13998871

[gpio]
dipsw1=0

[io3]

mode=dinput

autoNeutral=1

singleStickSteering=0

restrict=97

[dinput]

deviceName=G27

shifterName=

brakeAxis=Y
accelAxis=V

start=20
viewChg=21

shiftDn=6
shiftUp=5

gear1=9
gear2=10
gear3=11
gear4=12
gear5=13
gear6=14

reverseAccelAxis=0
reverseBrakeAxis=0

 

On A2

 

[vfs]
amfs=     (set to your amfs directory)
appdata= (set to your appdata directory)

[dns]
default=192.168.158.2

[ds]
region=4
serialNo=AAVE-01A13998872

[netenv]
enable=1
addrSuffix=2

[keychip]
subnet=192.168.158.0
id=AAVE-01A13998872

[gpio]
dipsw1=0

[io3]

mode=dinput

autoNeutral=1

singleStickSteering=0

restrict=97

[dinput]

deviceName=G27

shifterName=

brakeAxis=Y
accelAxis=V

start=20
viewChg=21

shiftDn=6
shiftUp=5

gear1=9
gear2=10
gear3=11
gear4=12
gear5=13
gear6=14

reverseAccelAxis=0
reverseBrakeAxis=0

 

Now edit the segatools v4 start.bat files:

 

On A1 edit:  "C:\Games\IDZ\minime\start.bat" to point to your minime directory

 

@echo off
start cmd /c "C:\Games\IDZ\minime\start.bat"
pushd %~dp0

.\inject.exe -k .\idzhook.dll .\ServerBoxD8_Nu_x64.exe
.\inject.exe -k .\idzhook.dll .\InitialD0_DX11_Nu.exe
.\inject.exe -d -k .\idzhook.dll .\amdaemon.exe -c configDHCP_Final_Common.json configDHCP_Final_JP.json configDHCP_Final_JP_ST1.json configDHCP_Final_JP_ST2.json configDHCP_Final_EX.json configDHCP_Final_EX_ST1.json configDHCP_Final_EX_ST2.json

echo.
echo Game processes have terminated
pause

 

On A2 edit:  "C:\Games\IDZ\minime\start.bat" to point to your minime directory

 

@echo off
start cmd /c "C:\Games\IDZ\minime\start.bat"
pushd %~dp0
.\inject.exe -k .\idzhook.dll .\InitialD0_DX11_Nu.exe
.\inject.exe -d -k .\idzhook.dll .\amdaemon.exe -c configDHCP_Final_Common.json configDHCP_Final_JP.json configDHCP_Final_JP_ST1.json configDHCP_Final_JP_ST2.json configDHCP_Final_EX.json configDHCP_Final_EX_ST1.json configDHCP_Final_EX_ST2.json

echo.
echo Game processes have terminated
pause

 

That should be it. Launch the game on A1 and A2 with the edited start.bat from segatools v4. Now just wait for the blue system link icon to turn Blue on bouth PCs.

Thanks for this - I was constantly getting 8305 errors if I had launch both A1 and A2 up together and no matter how much i changed the dipsw1 value to it was always hit or miss, what I found to work now 100% is to follow the guide but start A1 up first and once the game had fully loaded start up A2 - this is now working for me and maybe of help if anyone else is having the same issue! 

Modifié le 6 mars 2021 par M1nhx

[bestekar]

7 hours ago, M1nhx said:

Thanks for this - I was constantly getting 8305 errors if I had launch both A1 and A2 up together and no matter how much i changed the dipsw1 value to it was always hit or miss, what I found to work now 100% is to start A1 up first and once the game had fully loaded start up A2 - this is now working for me and maybe of help if anyone else is having the same issue! 

Just leave the Dipsw1=0 on bouth PCs and just add .\inject.exe -k .\idzhook.dll .\InitialD0_DX11_Nu.exe to start.bat on PC1. If you do get the error on the PC2 if you boot them at the same time: enter test mode, then exit test mode.

Modifié le 4 mars 2021 par bestekar

[xtremebuga]

Hello everyone, I come once again to ask for your help. My game now opens normally, everything is fine except the controls, I can't seem to get them to work. I've tried several ways and I couldn't. Below I will show you how my segatools.ini file is. I ask you to tell me where the error is, what should I change to make it work without using TP. My controller is Xbox One via bluetooth. Thank you very much in advance.

 

segatools.ini

 

[vfs]
amfs=F:\xxx\Initial D Arcade Stage Zero\amfs
appdata=C:\Users\xxxxx\AppData\Roaming\TeknoParrot\IDZ\

[dns]
default=192.168.0.121

[ds]
region=4

[netenv]
enable=1

[keychip]
subnet=192.168.0.0

[gpio]
dipsw1=1

[io3]
mode=tp
pos_shifter=0
autoNeutral=1
singleStickSteering=1
restrict=97

[dinput]
deviceName=
shifterName=
brakeAxis=RZ
accelAxis=Y
start=3
viewChg=10
shiftDn=1
shiftUp=2
gear1=1
gear2=2
gear3=3
gear4=4
gear5=5
gear6=6
reverseAccelAxis=0
reverseBrakeAxis=0

[bestekar]

14 hours ago, xtremebuga said:

Hello everyone, I come once again to ask for your help. My game now opens normally, everything is fine except the controls, I can't seem to get them to work. I've tried several ways and I couldn't. Below I will show you how my segatools.ini file is. I ask you to tell me where the error is, what should I change to make it work without using TP. My controller is Xbox One via bluetooth. Thank you very much in advance.

 

segatools.ini

 

[vfs]
amfs=F:\xxx\Initial D Arcade Stage Zero\amfs
appdata=C:\Users\xxxxx\AppData\Roaming\TeknoParrot\IDZ\

[dns]
default=192.168.0.121

[ds]
region=4

[netenv]
enable=1

[keychip]
subnet=192.168.0.0

[gpio]
dipsw1=1

[io3]
mode=tp
pos_shifter=0
autoNeutral=1
singleStickSteering=1
restrict=97

[dinput]
deviceName=
shifterName=
brakeAxis=RZ
accelAxis=Y
start=3
viewChg=10
shiftDn=1
shiftUp=2
gear1=1
gear2=2
gear3=3
gear4=4
gear5=5
gear6=6
reverseAccelAxis=0
reverseBrakeAxis=0

To start dont use the teknoparrot generated segatools.ini file or the other segatools that comes from teknoparrot if you want 1,2,3 and enter button to work

 

If you are using an xbox pad og xbox wheel

[io3]
mode=xinput

If you are using a PS4 pad, Logitech G27 Wheel ect. Basicly every other controller than an XBOX peripheral.

[io3]
mode=dinput

 

This mode only works if you launch the game with Teknoparrot. NEVER use mode=tp if you launch by any other way than teknoparrot

[io3]
mode=tp

 

Modifié le 5 mars 2021 par bestekar

[xtremebuga]

4 hours ago, bestekar said:

Para começar, não use o arquivo segatools.ini gerado pelo teknoparrot ou os outros segatools que vêm do teknoparrot se quiser 1,2,3 e o botão Enter para funcionar

 

Se você estiver usando um xbox pad og xbox wheel

modo [io3]
= xinput

Se você estiver usando um teclado PS4, Logitech G27 Wheel ect. Basicamente, qualquer outro controlador, exceto um periférico XBOX.

modo [io3]
= dinput

 

Este modo só funciona se você iniciar o jogo com Teknoparrot. NUNCA use mode = tp se você iniciar de qualquer outra forma que não o teknoparrot

modo [io3]
= tp

 

Thank you very much, it really worked. One more thing, how to configure the button to insert coins and the button to insert AIME card? Thank you very much in advance.

[Invité petje]

5 hours ago, xtremebuga said:

Thank you very much, it really worked. One more thing, how to configure the button to insert coins and the button to insert AIME card? Thank you very much in advance.

Standard it should be 3 on your keyboard to insert coins

Hold enter a few seconds to insert AIME card

No idea how to assign it to your joystick buttons

Maybe with autohotkey ?

https://www.autohotkey.com/

Should be possible to edit segatools.ini to assign buttons to your liking, but no idea how

1, 2 or F1, F2 are your test / service buttons

 

Modifié le 6 mars 2021 par petje

[xtremebuga]

35 minutes ago, petje said:

Standard it should be 3 on your keyboard to insert coins

Hold enter a few seconds to insert AIME card

No idea how to assign it to your joystick buttons

Maybe with autohotkey ?

https://www.autohotkey.com/

Should be possible to edit segatools.ini to assign buttons to your liking, but no idea how

1, 2 or F1, F2 are your test / service buttons

 

I realized that there are other users here with the same problem that I have, the button 3 does not work and the enter does not work either, F1 is working, the problem is that if these buttons do not work, there is no way to use the AIME card, therefore it will not save progress. To be able to insert coins, first I open the game with the TP, insert the maximum number of coins and then I open the game without the TP, that way I can, what I can't do is insert the AIME card. Anyway, thank you very much for your help.

[bestekar]

53 minutes ago, xtremebuga said:

I realized that there are other users here with the same problem that I have, the button 3 does not work and the enter does not work either, F1 is working, the problem is that if these buttons do not work, there is no way to use the AIME card, therefore it will not save progress. To be able to insert coins, first I open the game with the TP, insert the maximum number of coins and then I open the game without the TP, that way I can, what I can't do is insert the AIME card. Anyway, thank you very much for your help.

The reason why it dosent work is that you are using the segatools that came with teknoparrot. you need to stop launching the game with TP since it overwrites the segatools.ini file each time you launch with TP. just download the SEGATOOLS V4 and exctract that and overwrite the files in game exe folder except segatools.ini . If you have launched it with teknoparrot it will set [io3] mode=tp again. so stop using teknoparrot to launch if you want it to work from start.bat in the game folder

[Invité petje]

Let the race begin !!

 

[Tremolux]

Le 07/03/2021 à 01:18, petje a dit :

Let the race begin !!

 

Nice !

[Tremolux]

Does someone know if there's a way to switch off the cars' lights ?

Thanks

[Invité petje]

3 minutes ago, Tremolux said:

Does someone know if there's a way to switch off the cars' lights ?

 

Not sure for which versions if ID

Press and hold the start button to turn off your headlights.
Simply press it again (no need to hold) to turn it on again.
Works only during night or wet races.

[Tremolux]

il y a 12 minutes, petje a dit :

Not sure for which versions if ID

Press and hold the start button to turn off your headlights.
Simply press it again (no need to hold) to turn it on again.
Works only during night or wet races.

Thanks ! Maybe my error was not holding the start button long enough...will try again

Modifié le 9 mars 2021 par Tremolux

[Tremolux]

il y a 21 minutes, petje a dit :

Not sure for which versions if ID

Press and hold the start button to turn off your headlights.
Simply press it again (no need to hold) to turn it on again.
Works only during night or wet races.

Thank you so much, that was it !! I was finally able to win this race in chapter 3

[soso92]

Le 07/03/2021 à 01:18, petje a dit :

Let the race begin !!

 

Nice a great game I hope we have it one day

[HC0114]

Hi, I got Error 0912 in Initial D Zero, anyone know how to fix this?

My PC spec is

Intel Pentium Gold G5400

GT1030

4GB Ram

[krisevol]

Any chance for a pm link to v2?

[Invité petje]

On 3/13/2021 at 4:32 AM, krisevol said:

Any chance for a pm link to v2?

No people this is not some "secret" link to any game
A administrator removed a post in another thread, so that is why you get "no permission" the page does not exist anymore

Modifié le 23 mars 2021 par petje

[Invité petje]

On 12/12/2020 at 9:44 AM, xocruncheyriceox said:

If you leave the main window the game would not show (it will black out the main window.) I also disabled borderless gaming and that helped as well due to what seemed to be an issue of tabbing out of and off the main window of the game.

SOLUTION

Patch the game .exe files

https://idas-zero-patcher.netlify.app/

 

Edit InitialD.ini

 

FullScreen = 0

SyncMode = 0

 

Alt-TAB all you want, works fine 

Game still runs full screen

 

 

Modifié le 13 mars 2021 par petje

[mastershakelock]

1 hour ago, petje said:

SOLUTION

Patch the game .exe files

https://idas-zero-patcher.netlify.app/

 

Edit InitialD.ini

 

FullScreen = 0

SyncMode = 0

 

Alt-TAB all you want, works fine 

Game still runs full screen

 

 

 

Great info petje tested and confirmed on v2.11

[Tremolux]

Hi,

Are there only 3 stages in Chapter 3 ? I had a teaser "next story coming soon" for a while but no new races have been unlocked since a long time now. I have two golden crowns and a silver one in chapter 3 so far...

Thanks

Modifié le 14 mars 2021 par Tremolux

[akasatana]

Where is IDZv2?

Modifié le 15 mars 2021 par akasatana

[wai7655]

I am use the 3440x1440 21:9 monitor, and download the fullscreen patch in https://idas-zero-patcher.netlify.app/ .

The fullscreen actely was successful, but I don't know why the screen prejudice to the left side, how to setting the screen in central?

Thanks

[Invité petje]

10 hours ago, wai7655 said:

how to setting the screen in central?

Probably not, the resolution patch is experimental, just run the game at 16:9 resolution 1920x1080
Even running it at 1920x1200 gives graphical glitches (course map in middle of screen)

[EdenNotRaven]

On 13.3.2021 at 2:45 PM, petje said:

 

Hey! Any chance for PM this Dz2?

Modifié le 23 mars 2021 par EdenNotRaven

[Invité petje]

27 minutes ago, EdenNotRaven said:

Hey! Any chance for PM this Dz2?

HEY !

NO, do not ask me for something I do not have

No people this is not some "secret" link to any game
A administrator removed a post in another thread, so that is why you get "no permission" the page does not exist anymore

Modifié le 23 mars 2021 par petje