[TUTO] Initial D Stage Zero Arcade - how to setup and play (Nvidia & AMD Cards working)

[SimonBv]

My ipv4 address was 192.168.0.12 and so I had configured it in segatools.ini, now I changed the static ip address to 192.168.1.2 and the dns to 8.8.8.8 and 8.8.4.4, but still giving error 8306.

[SimonBv]

hace 11 minutos, Kobe46 dijo:

I would just make sure your [dns] section in Segatools.ini is setup with the network IP Address of your local machine. I assume you are running Minime on the same machine and not a separate one? but yea just make sure your IP Address is set there.

as precaution, make sure [keychip] section is setup with your Network Address: 

Example: if IP: 192.168.1.8 then Network Address can be 192.168.1.0 or to be sure, 192.168.0.0 works too.

 

I don't think DNS is an issue since if All.Net gets a connection, the established network seems to be fine. Just curious as well, what version of Windows are you on? Windows 10 build??

I am using Windows 10 Professional in its 1903 version.

In my default gateway I have 192.168.0.1, should I put that one in the [keychip] section?

Modifié le 13 décembre 2019 par SimonBv

[Invité petje]

A restart of the system could it help ?

Did you use the plugins.zip files (minime) from the first post ?

With those it worked fine for me

[SimonBv]

I haven't used the plugins yet, right now I will try

Edit: just in case I am using minime v009 and segatools v003

hace 6 minutos, petje dijo:

A restart of the system could it help ?

Did you use the plugins.zip files (minime) from the first post ?

With those it worked fine for me

 

Modifié le 13 décembre 2019 par SimonBv

[Invité petje]

the plugins.zip is a prebuild minime

this version worked for me

then you can overwrite it with the files of version 9

Modifié le 13 décembre 2019 par petje

[Kobe46]

56 minutes ago, SimonBv said:

I am using Windows 10 Professional in its 1903 version.

In my default gateway I have 192.168.0.1, should I put that one in the [keychip] section?

That section is not for Default gateway, it just needs to know your subnet, from the look of it, it should be 192.168.0.0, since your gateway is 0.1. You should change your IP back to what it was on your computer side so you don't mess around with internal network. So back to 192.168.0.12 as it was before. I guess yea the last step which I don't think will do anything would be to statically assign your Primary DNS and Alternate DNS to 8.8.8.8 and 8.8.4.4, I really don't think this will affect it. Just in case though, how is your network setup.

 

Computer --> Ethernet --> Router --> Ethernet --> Modem --> Internet? Or wireless somewhere works fine too.

[SimonBv]

hace 45 minutos, petje dijo:

the plugins.zip is a prebuild minime

this version worked for me

then you can overwrite it with the files of version 9

I just tried the minime that the plugins.zip brought and still giving me error 8306, and the static ip configuration causes my pc to lose the connection.

Modifié le 14 décembre 2019 par SimonBv

[SimonBv]

hace 23 minutos, Kobe46 dijo:

That section is not for Default gateway, it just needs to know your subnet, from the look of it, it should be 192.168.0.0, since your gateway is 0.1. You should change your IP back to what it was on your computer side so you don't mess around with internal network. So back to 192.168.0.12 as it was before. I guess yea the last step which I don't think will do anything would be to statically assign your Primary DNS and Alternate DNS to 8.8.8.8 and 8.8.4.4, I really don't think this will affect it. Just in case though, how is your network setup.

 

Computer --> Ethernet --> Router --> Ethernet --> Modem --> Internet? Or wireless somewhere works fine too.

How can I tell you my network configuration? I am connected by ethernet.

You mean this? Computer -> Ethernet -> Modem -> Internet

Modifié le 14 décembre 2019 par SimonBv

[Kobe46]

9 minutes ago, SimonBv said:

How can I tell you my network configuration? I am connected by ethernet.

Ok, I just wanted to know if you are connecting to your own personal router before the Modem that goes to Internet. or does your Ethernet cable run to a Modem/router that came from your Internet provider is what I am looking for.

[Kobe46]

1 hour ago, SimonBv said:

How can I tell you my network configuration? I am connected by ethernet.

You mean this? Computer -> Ethernet -> Modem -> Internet

 

Some people who I have helped had to make that DNS change on the modem's side in order for it to work. I would test it on your local computer first, statically assign your Primary DNS to 8.8.8.8 and then alternate to 8.8.4.4

 

If that does not work you might have to statically assign it on your modem so it goes out that. I know, it was weird that it needed to be done that way, but some Internet Providers are very picky and restrict specific access because of it.

[SimonBv]

I assigned 8.8.8.8 and 8.8.4.4 on my pc and modem but it still doesn't work.

[Kobe46]

Could you provide me what your segatools.ini looks like? When you are booting up, do you get 2 Direct3D windows? One for the game and one for the ServerBox?

[SimonBv]

Yep, it's 2 windows, one for the game and one for the serverbox.
Here I leave my segatools.ini

segatools.ini

[Kobe46]

All of that definitely looks correct. When you start minime, it shows up like this?

[SimonBv]

Yep, it looks exactly like that

[Kobe46]

Does your minime, establish any connection data when you are booting up? or when you run that Network test, you might be able to see what the error is

[SimonBv]

Yep, this is what it shows after doing the network test

[SimonBv]

By the doubts, now that I see my serverbox I realize that the time in Auth is wrong, I think that is the time of my bios, can this be the problem?

[Kobe46]

That minime screenshot, is there nothing else under the idz:ping? I think thats the problem.

It should technically attempt the connection after the 2nd ping result,  ping from 127.0.0.1:35600 then it should start establishing connection to aimedb to open it up

 

Don't worry about the time, that is normal.

 

[SimonBv]

Sorry, I don't understand what I should do

[Kobe46]

You disabled your Firewall and or antivirus? Do you have anything else that could be preventing something, VPN? or anything like that. The only reason is for the test it should establish after the first or 2nd ping, it seems like it is not getting the connection it needs and then stops. 

If you go into your amdaemon,exe, should be command prompt with all the data running like netenv and stuff, You should see some spots in there with the Line 

 

Error ####

 

most of time it should be Error 0

 

If you can find out when it does the Error 8306, and take a screenshot of it.

and if you could take a screenshot of the minime data from beginning to end when the error pops up? 

[SimonBv]

Okay, the error appears on the "Initializing" screen after calibrating the steering wheel, after verifying that it was not solved by deactivating the firewall, I activated it again, I will leave a capture of the error, and 3 minime captures, since the game starts until the mistake, in the last capture when the connection reopens is because the game was playing a replay.

[Invité petje]

Are you trying to run id zero on a sapphire HD 7770 gpu ?

I doubt that will work no amd support for this game as far as i know

Could you upload your screendumps to imgshare.io emuline makes them to small to see

[SimonBv]

I do not think that the GPU is related to error 8306, the game looks and works well although sometimes bug textures appear in cars and always almost at the end of the races the audio slows down and sounds bad.

Here I leave the 3 minime screenshots uploaded to imgshare.

https://imgshare.io/image/TGYL4
https://imgshare.io/image/TGUvZ
https://imgshare.io/image/TGxlc

[Invité petje]

3 minutes ago, SimonBv said:

I do not think that the GPU is related to error 8306, the game looks and works well although sometimes bug textures appear in cars and always almost at the end of the races the audio slows down and sounds bad.

Well the title of this thread is [TUTO] Initial D Stage Zero Arcade - how to setup and play (Nvidia Cards for now only)

You will need a shader fix which is not available as of yet

Do you have any tools running for system security antivirus firewall ?

Disable all of it

[SimonBv]

Nope, I don't use any antivirus and I have Windows Defender disabled.

[Invité petje]

I do not run any of the .exe or .bat as administrator

Very strange problem you got with your setup

What about the other dos box log ?

There are two

[SimonBv]

This is what appears in the other cmd window, since the game starts until the error.

 

--- Begin idz_pre_startup ---
---  End  idz_pre_startup ---
amdaemonExe Ver.2425 Build:Mar 29 2018 17:23:39

SetupAPI: Interface {741b5fca-...} -> Device node $sram
SRAM: Open device
SRAM: Get geometry
SetupAPI: Interface {b7970f0c-...} -> Device node $eeprom
EEPROM: Open device
EEPROM: Get geometry
SetupAPI: Interface {279a9f67-...} -> Device node $ds
DS: Open device
DS: Get geometry
DS: Setup IOCTL
SetupAPI: Interface {e9a26688-...} -> Device node $gpio
GPIO: Open device
GPIO: Describe GPIO ports
Process state: setup Game Mode
Security: Opened handle
DS: Read sector 00000000
Security: nusec_ioctl_get_nvram_geometry
Security: nusec_ioctl_get_nearfull
Hwmon: Opened device
AmVideo: amDllVideoOpen)
AmVideo: amDllVideoSetResolution
AmVideo: amDllVideoClose)
Netenv: GetAdaptersInfo: Virtualized LAN configuration:
Netenv: Interface IP :   192.168.  0. 11
Netenv: Router IP    :   192.168.  0.254
Netenv: MAC Address  : 01:02:03:04:05:06
Netenv: GetAdaptersInfo: Virtualized LAN configuration:
Netenv: Interface IP :   192.168.  0. 11
Netenv: Router IP    :   192.168.  0.254
Netenv: MAC Address  : 01:02:03:04:05:06
Netenv: GetAdaptersInfo: Virtualized LAN configuration:
Netenv: Interface IP :   192.168.  0. 11
Netenv: Router IP    :   192.168.  0.254
Netenv: MAC Address  : 01:02:03:04:05:06
SetupAPI: Interface {db6bbb45-...} -> Device node $jvs
JVS Port: Open device
JVS I/O: Starting Initial D Zero backend DLL
XInput: --- Begin configuration ---
XInput: Single Stick Steering : 1
XInput: ---  End  configuration ---
XInput: Using XInput controller
JVS Port: Port startup (?)
EEPROM: Read off 1f0 len 30
EEPROM: Read off 90 len b0
EEPROM: Read off 40 len 50
JVS I/O: Reset (param d9)
JVS I/O: Reset (param d9)
JVS Port: Sense line 2.5 V (address unassigned)
JVS I/O: Assign addr 01 sense 0
JVS Port: Sense line 0.0 V (address assigned)
JVS I/O: Get features
JVS I/O: Get command format version
JVS I/O: Get JVS version
JVS I/O: Get communication version
JVS I/O: Read ID
Netenv: GetBestRoute ip4 0 -> ip4 0
Clock: Returning JST timezone
Error 0
Process state: Advertise
EEPROM: Read off 1000 len 80
NFC Assembly: Starting backend DLL
NFC 00: Reset
Security: nusec_ioctl_get_billing_pubkey
>>> 00000001408387C1:0/1024
<<< 00000001408387C1:162/1024
Security: nusec_ioctl_get_play_limit
Netenv: GetBestRoute ip4 0 -> ip4 c0a8000b
Netenv: GetBestRoute ip4 0 -> ip4 c0a8000b
Security: nusec_ioctl_get_nearfull
start LAN install - server.
Netenv: Virtualized ICMP Ping to ip4 c0a800fe
Security: nusec_ioctl_get_play_count
Netenv: Virtualized ICMP Ping to ip4 c0a800fe
Netenv: Virtualized ICMP Ping to ip4 c0a800fe
Security: nusec_ioctl_put_trace_log_data
    00000000: 81 13 0c 0e 17 1d 2a 50 6f 77 65 72 20 6f 6e 20 ......*Power on
    00000010: 41 36 39 45 30 31 41 38 38 38 38 20 53 44 44 46 A69E01A8888 SDDF
    00000020: 20 31 2e 33 31 20 20 20 41 36 39 45 01 41 88 88  1.31   A69E.A..
    00000030: 18 05 00 00 00 00 00 00 00 00 00 00             ............

    H: 1 T: 0
Security: nusec_ioctl_put_trace_log_data
    00000000: 82 13 0c 0e 17 1d 2a 00 00 00 01 01 00 01 01 01 ......*.........
    00000010: 01 02 03 04 05 06 18 05 41 36 39 45 01 41 88 88 ........A69E.A..
    00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    00000030: 00 00 00 00 00 00 00 00 00 00 00 00             ............

    H: 2 T: 0
Netenv: Virtualized ICMP Ping to ip4 c0a8000c
Netenv: Virtualized ICMP Ping to ip4 c0a8000c
Netenv: Virtualized ICMP Ping to ip4 c0a8000c
Clock: Blocked timezone update
Clock: Blocked system time update
Clock: Blocked system time update
Security: nusec_ioctl_put_trace_log_data
    00000000: 81 13 0c 0e 17 1e 03 43 6c 6f 63 6b 20 31 39 31 .......Clock 191
    00000010: 32 31 35 30 38 33 30 30 32 20 31 39 31 32 31 35 215083002 191215
    00000020: 30 38 33 30 30 33 20 20 41 36 39 45 01 41 88 88 083003  A69E.A..
    00000030: 18 05 00 00 00 00 00 00 00 00 00 00             ............

    H: 3 T: 0
Security: nusec_ioctl_put_trace_log_data
    00000000: 81 13 0c 0e 17 1e 03 43 6c 6f 63 6b 20 31 39 31 .......Clock 191
    00000010: 32 31 35 30 38 33 30 30 32 20 31 39 31 32 31 35 215083002 191215
    00000020: 30 38 33 30 30 33 20 20 41 36 39 45 01 41 88 88 083003  A69E.A..
    00000030: 18 05 00 00 00 00 00 00 00 00 00 00             ............

    H: 4 T: 0
Security: nusec_ioctl_get_nvram_available: used=4 avail=7150
Security: nusec_ioctl_put_trace_log_data
    00000000: 81 13 0c 0e 17 1e 03 53 79 73 20 41 75 74 68 20 .......Sys Auth
    00000010: 4f 4b 20 20 20 20 20 20 20 20 20 20 20 20 20 20 OK
    00000020: 20 20 20 20 20 20 20 20 41 36 39 45 01 41 88 88         A69E.A..
    00000030: 18 05 00 00 00 00 00 00 00 00 00 00             ............

    H: 5 T: 0
start NET deliver.
App Image    - Download Status: 100
Option Image - Download Status: 100
Security: nusec_ioctl_put_trace_log_data
    00000000: 81 13 0c 0e 17 1e 0d 41 75 74 68 20 72 65 74 72 .......Auth retr
    00000010: 79 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 y
    00000020: 20 20 20 20 20 20 20 20 41 36 39 45 01 41 88 88         A69E.A..
    00000030: 18 05 00 00 00 00 00 00 00 00 00 00             ............

    H: 6 T: 0
Security: nusec_ioctl_get_play_count
Security: nusec_ioctl_get_play_limit
Security: nusec_ioctl_get_billing_ca_cert
>>> 0000000140838DAC:0/1024
<<< 0000000140838DAC:817/1024
Security: nusec_ioctl_get_trace_log_state H: 6 T: 0
Security: nusec_ioctl_get_trace_log_state H: 6 T: 0
Security: nusec_ioctl_get_trace_log_data
    Params: 0 6 Buf: 429240
Security: nusec_ioctl_erase_trace_log(count=6)
Security: nusec_ioctl_put_trace_log_data
    00000000: 81 13 0c 0e 17 1e 0d 41 75 74 68 20 4f 4b 20 20 .......Auth OK
    00000010: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
    00000020: 20 20 20 20 20 20 20 20 41 36 39 45 01 41 88 88         A69E.A..
    00000030: 18 05 00 00 00 00 00 00 00 00 00 00             ............

    H: 7 T: 6
Security: nusec_ioctl_get_nvram_available: used=1 avail=7153

[Kobe46]

I don't think AMD is the issue, I tested this on a AMD GPU and it seems to be fine, you might get some graphical texture issues but still runs.

 

minime seems to be correct data, I don't see an issue there. 

 

What is the data in your amdaemon.exe, the other window with all the data. Just want to see where the error comes up in there.

 

out of curiosity, what happens when you try and run the game with your ethernet disabled or unplugged? I know the game still somehow works, but it fails to connect to the card reader. I just want to see it boot up past that point.

Modifié le 14 décembre 2019 par Kobe46

[Kobe46]

Give me a bit, I am trying to compare the information with what I am getting to see if I can see something wrong.

[SimonBv]

I just tried ethernet disconnected but there was no difference.

[Kobe46]

So I do see data that is incorrect on your minime, the end of your minime, the last 4-5 lines.

 

  app:idz:session Connection closed +72ms
  app:idz:session Connection opened +524ms
  app:idz:decoder Raw: 040302014141564530314139393939003133300000000000534444460000000023010000ffffffff00000000000000000400000013000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 +545ms
  app:idz:decoder Header: {"blah":"blah"} +1ms

 

Yours when it does

app:idz:session Connection opened +3m

 

That right there is 3 minutes... That is weird. So this is definitely related to your network. I don't know what it could be, but it is some how related. 

 

You don't have any VPN's or anything like proxy or anything?

[bestekar]

Anyone been able to get pair link multiplayer working ? Or at least been able to connect to the sever running on PC1 (A1) with PC2 (A2) with an error message ?  If so what are your segatools.ini version and configs fora A1 and A2 ?

[SimonBv]

hace 12 horas, Kobe46 dijo:

So I do see data that is incorrect on your minime, the end of your minime, the last 4-5 lines.

 

  app:idz:session Connection closed +72ms
  app:idz:session Connection opened +524ms
  app:idz:decoder Raw: 040302014141564530314139393939003133300000000000534444460000000023010000ffffffff00000000000000000400000013000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 +545ms
  app:idz:decoder Header: {"blah":"blah"} +1ms

 

Yours when it does

app:idz:session Connection opened +3m

 

That right there is 3 minutes... That is weird. So this is definitely related to your network. I don't know what it could be, but it is some how related. 

 

You don't have any VPN's or anything like proxy or anything?

Nope, I don't have any of that, I don't know what to do to fix it.

[Xnitro67]

cant get my game to work. the minime part works fine but the main part gives off errors and repeats "cannot find accounting info"

--- Begin idz_pre_startup ---
---  End  idz_pre_startup ---
amdaemonExe Ver.2425 Build:Mar 29 2018 17:23:39

SetupAPI: Interface {741b5fca-...} -> Device node $sram
SRAM: Open device
SRAM: Get geometry
SetupAPI: Interface {b7970f0c-...} -> Device node $eeprom
EEPROM: Open device
EEPROM: Get geometry
SetupAPI: Interface {279a9f67-...} -> Device node $ds
DS: Open device
DS: Get geometry
DS: Setup IOCTL
SetupAPI: Interface {e9a26688-...} -> Device node $gpio
GPIO: Open device
GPIO: Describe GPIO ports
Process state: setup Game Mode
Security: Opened handle
DS: Read sector 00000000
Security: nusec_ioctl_get_nvram_geometry
Security: nusec_ioctl_get_nearfull
Runtime exception occurred.
File: D:\jenkins_work\workspace\all_build\libs\libamw\src\amw_resource_set.cpp
Line: 218
Function: enum am::ResourceSet::Status __cdecl am::ResourceSet::loadError(const wchar_t *,class am::util::ErrorResource &)
Message: required file not found. E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\am_resources\\error.english.dll
Stack:
[0x000000014004462e] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014000a087] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x00000001402269bd] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014022e821] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014022e742] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x00000001401fc1f0] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x00000001401fbe04] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x00000001401fbcc4] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x0000000140217969] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014022540e] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x00000001401ee0a4] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014000252c] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x00000001400022bc] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014000ff5c] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014022d937] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x0000000064c4876b] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\idzhook.dll
[0x00007ffbf93c7bd4] BaseThreadInitThunk @ <unknown file>:C:\Windows\System32\KERNEL32.DLL
[0x00007ffbfb36ced1] RtlUserThreadStart @ <unknown file>:C:\Windows\SYSTEM32\ntdll.dll
Clock: Returning JST timezone
Hwmon: Opened device
AmVideo: amDllVideoOpen)
AmVideo: amDllVideoSetResolution
AmVideo: amDllVideoClose)
Netenv: GetAdaptersInfo: Virtualized LAN configuration:
Netenv: Interface IP :   192.168.  1. 11
Netenv: Router IP    :   192.168.  1.254
Netenv: MAC Address  : 01:02:03:04:05:06
Netenv: GetAdaptersInfo: Virtualized LAN configuration:
Netenv: Interface IP :   192.168.  1. 11
Netenv: Router IP    :   192.168.  1.254
Netenv: MAC Address  : 01:02:03:04:05:06
Netenv: GetAdaptersInfo: Virtualized LAN configuration:
Netenv: Interface IP :   192.168.  1. 11
Netenv: Router IP    :   192.168.  1.254
Netenv: MAC Address  : 01:02:03:04:05:06
Runtime exception occurred.
File: D:\jenkins_work\workspace\all_build\libs\libamw\src\amw_netdeliver_context.cpp
Line: 91
Function: enum am::util::ModuleContext<3>::Status __cdecl am::netdeliver::Context::initialize(void)
Message: amGfetcherInit(). ErrCode -1.
Stack:
[0x000000014004462e] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014000a087] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x00000001402269bd] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014022e821] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014022e742] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x00000001401fd531] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x00000001401d57bc] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x0000000140217c43] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014022540e] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x00000001401ee0a4] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014000252c] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x00000001400022bc] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014000ff5c] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014022d937] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x0000000064c4876b] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\idzhook.dll
[0x00007ffbf93c7bd4] BaseThreadInitThunk @ <unknown file>:C:\Windows\System32\KERNEL32.DLL
[0x00007ffbfb36ced1] RtlUserThreadStart @ <unknown file>:C:\Windows\SYSTEM32\ntdll.dll
Runtime exception occurred.
File: D:\jenkins_work\workspace\all_build\libs\libamw\src\amw_appimage_context.cpp
Line: 61
Function: enum am::util::ModuleContext<1>::Status __cdecl am::appimage::Context::initialize(void)
Message: amAppImageInit(). ErrCode -5.
Stack:
[0x000000014004462e] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014000a087] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x00000001402269bd] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014022e821] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014022e742] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x00000001401fdeb1] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x00000001401d762a] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x0000000140217c53] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014022540e] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x00000001401ee0a4] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014000252c] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x00000001400022bc] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014000ff5c] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x000000014022d937] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\amdaemon.exe
[0x0000000064c4876b] <unknown symbol> @ <unknown file>:E:\Emulators\InitialD\InitialDZero\SDDF_1.31.00\app\package\idzhook.dll
[0x00007ffbf93c7bd4] BaseThreadInitThunk @ <unknown file>:C:\Windows\System32\KERNEL32.DLL
[0x00007ffbfb36ced1] RtlUserThreadStart @ <unknown file>:C:\Windows\SYSTEM32\ntdll.dll
SetupAPI: Interface {db6bbb45-...} -> Device node $jvs
JVS Port: Open device
JVS I/O: Starting Initial D Zero backend DLL
XInput: Using XInput controller
JVS Port: Port startup (?)
EEPROM: Read off 1f0 len 30
JVS I/O: Reset (param d9)
EEPROM: Read off 90 len b0
EEPROM: Read off 40 len 50
Error 4104
NFC Assembly: Starting backend DLL
NFC 00: Reset
JVS I/O: Reset (param d9)
JVS Port: Sense line 2.5 V (address unassigned)
JVS I/O: Assign addr 01 sense 0
JVS Port: Sense line 0.0 V (address assigned)
JVS I/O: Get features
JVS I/O: Get command format version
JVS I/O: Get JVS version
JVS I/O: Get communication version
JVS I/O: Read ID
Netenv: GetBestRoute ip4 0 -> ip4 0
Process state: Advertise
Security: nusec_ioctl_get_billing_pubkey
>>> 00000001408387C1:0/1024
<<< 00000001408387C1:162/1024
Security: nusec_ioctl_get_play_limit
Netenv: GetBestRoute ip4 0 -> ip4 c0a8010b
Netenv: GetBestRoute ip4 0 -> ip4 c0a8010b
Security: nusec_ioctl_get_nearfull
Netenv: Virtualized ICMP Ping to ip4 c0a801fe
Security: nusec_ioctl_get_play_count
Netenv: Virtualized ICMP Ping to ip4 c0a801fe
Netenv: Virtualized ICMP Ping to ip4 c0a801fe
Security: nusec_ioctl_put_trace_log_data
    00000000: 01 13 0c 11 06 1f 35 50 6f 77 65 72 20 6f 6e 20 ......5Power on
    00000010: 41 36 39 45 30 31 41 38 38 38 38 20 53 44 44 46 A69E01A8888 SDDF
    00000020: 20 30 2e 30 30 20 20 20 41 36 39 45 01 41 88 88  0.00   A69E.A..
    00000030: 18 05 00 00 00 00 00 00 00 00 00 00             ............

    H: 1 T: 0
Security: nusec_ioctl_put_trace_log_data
    00000000: 02 13 0c 11 06 1f 35 00 00 00 01 01 00 01 01 01 ......5.........
    00000010: 01 02 03 04 05 06 18 05 41 36 39 45 01 41 88 88 ........A69E.A..
    00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    00000030: 00 00 00 00 00 00 00 00 00 00 00 00             ............

    H: 2 T: 0
Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.Cannot get accounting info.C

 

[ZeAce]

Ive followed the tut as closely as i could and I am stuck on a 8005 error. can someone help me out?

[Invité petje]

5 minutes ago, ZeAce said:

Ive followed the tut as closely as i could and I am stuck on a 8005 error. can someone help me out?

Read the conversation on the page to understand what is going on

The solution is to set your DNS to 8.8.8.8 and 8.8.4.4 ?