Aller au contenu

[TUTO] Darius Burst - Another Chronicle, How to play with Teknoparrot - Gameloader All RH and /or Jconfig.


Messages recommandés

Invité linglang
Posté(e) (modifié)

dd48x7s-8a732fa0-544a-4273-9eca-dd5147f3

As always, awesome game icon art by @POOTERMAN

 

 

This one is easy to install, but before the instructions "disappears" in the TeknoParrot thread, here some instructions.

First try to run the game in Teknoparrot 1.0.0.xxx, a clean dump with no editing in the init.ini file, not yet.

If that does not work for you, you can try it with to edit the init.ini file

Or you can try to load it with GameLoader All RH and JConfig.

(I only tried with TeknoParrot, works fine for me at the correct aspect ratio)

 

Would this be the correct monitor to play Darius Burst Another Chronicle ?

:P

philips-49-678_678x452.jpg

Philips Brilliance 499P9H Ultra-Wide 49-Inch 

 

I personally leave the game at the correct aspect ratio.

 

A bezel for the game to use in Gameloader All RH.

Check bezel image enable, on tab other 3, and choose the picture.

Thanks @EmuAl

https://1drv.ms/u/s!An3u0UgMGUSShqd4-Am2rkrIeK2r0g

Mirror of file location.

https://ibb.co/H4xTsQW

 

 

Thanks @dex77

 

- [Reaver/Nezarn][OpenParrot] Darius Burst Another Chronicle is now supported, open source ftw.

NOTE: You can play up to 4 players!

NOTE: 2nd screen is not inverted, truly epic achievement by Nezarn. Best things come first in TeknoParrot as always!

NOTE: Test Switch does not work right now, will log on real cabinet at some point to fix this issue.

NOTE: Copy folder b74e8ba0fff8b4f7b32099c84f9d1c23_000 to gamedir and rename to Db74e8ba0fff8b4f7b32099c84f9d1c23_000

NOTE: Copy folder EDData to gamedir and rename to DEDData

NOTE: NESYS is emulated, enjoy lots and lots of missions/modes!

NOTE: Here is proper config for init.ini:

2720

768

60

0    <<<<< full screen option

0

1

0

0

1

1

0

0

 

NOTE: 4th parameter is fullscreen.

Feel free to change resolution, best played on ultra wide monitor.

- [Reaver][OpenParrot] Fast I/O emulator now supports 3 and 4 player controls.

- [Reaver][OpenParrot] Fast I/O emulator improvements.

 

No correction, trying to run Darius Burst in full screen ?

Thanks @mamefan2018

 

Just change the fourth line in the ini as shown in latest TP release notes from 0 to 1

And add the resolution as a custom resolution in your video card's control panel.

Or another option is to run it through GameLoader All RH.

Check the latest release notes it has a video showing how to set it up on one screen or dual screen.

 

thanks @dex77

REPORT:

I did some quick tests, here what's going on...

- TP enables online features and that's pretty neat, working!

- To display the game properly in fullscreen you have to create a custom resolution on your nvidia (or else brand) panel settings

if not you're gonna see nothing but a white screen, the game in fullscreen mode doesn't reach the whole horizontal length,

it's probably 2600px out of 2720... 

- credits feature works properly!

- the game is a blast!

 

Audio does NOT work at the moment. (1.0.0.122)

 

A solution for the audio problem is posted on the TeknoParrot wiki

https://github.com/teknogods/OpenParrot/releases

It says "7 days ago" but it has the "Fixed sound in Darius Burst oops" fix.

:very-good:

Anyhow...

THANKS @POOTERMAN

He already made a awesome game icon for this release.

Use the above picture, and rename it DariusBurst.png and place it in your TeknoParrot 1.0.0.122 Icons folder !

 

Thanks @Solo

Turtorial, How to Darius Burst with Jconfig.

It works fine with Jconfig (needs txac.key)

Use version 1.7(+) from here:

Open iDmacXv1.7_2019_04_10.rar, inside the folder misc you will find, DariusBurst.rar

 

 

Thanks @eathearty1

For English text in game just change line 12 in init.ini to 1

Japanese (0),
English (1),
Shinjitai (2)

 

Thanks @7zxkv

Mode A - B Unlock !

Enjoy!

 

MEGA BLAST !!!

 

I hope that this tutorial helps other people out.

It takes you a few moments to read, but it took me a while to figure it out.

When you get the game working, thanks to this "manual", please give a thanks at this post.

:very-good:

And a BIG thanks for the people who originally uploaded the games, we all can enjoy (if you do it right) !!!

And of course all the people involved in, the game loaders and JVS I/O emulation applications we use, and all the people I "forgot".

 

Also look at the posts below, some members / people add helpful information, thank them also .....

 

 

 

Modifié par linglang
Added info about mode A - B, changing language, running full screen.
Posté(e) (modifié)

 

 

hey Linglang, let's call a truce for the sake of the knowledge... did you try the game?  ...after my tests i encountered an issue, the audio doesn't work at all, can you confirm?

 

Modifié par 7zxkv
Invité linglang
Posté(e) (modifié)

Yes sir, I concur.

No sound at all, nor in attract mode, nor in game.

Solved !!

 

Peace !!

Modifié par linglang
Posté(e) (modifié)
50 minutes ago, linglang said:

Yes sir, I concur.

No sound at all, nor in attract mode, nor in game.

 

Peace !!

 

Ok, then TP has a problem... and did you try it only with jconfig?   

i tested it as well but what i get it's just a white screen, with allrh instead, it boots with an I/O error and the second screen flipped upside down...

a troll from 1cc was bubbling something about being able to boot with jconfig 2... probably that's the way at the moment... will try later...

 

yo, peace!

 

EDIT

Jconfig stand alone... tried the latest version again, just figured that you have to set a custom res in order to display the game like for TP, unfortunately it gives IO error and the second screen upside down as well, same as with allrh...

my conclusion is that those 1cc trolls talking about being able to play it stand alone are just trolling as usually, so far only TP is capable to boot it properly... yup.. patience...amazing virtue! :very-good:

Modifié par dex77
Invité linglang
Posté(e) (modifié)

Yes I have the same problems you described.

As you said, a TeknoParrot update could solve this probably.

No matter, eventually it will work fine, patience.

 

SOLVED !!!

The same link as above.

A solution for the audio problem is posted on the TeknoParrot wiki

https://github.com/teknogods/OpenParrot/releases

It says "7 days ago" but it has the "Fixed sound in Darius Burst oops" fix.

 

Record time solution from the TEKNO GODS !!!

:bravo::very-good:

Modifié par linglang
Posté(e) (modifié)
18 hours ago, dex77 said:

 

Ok, then TP has a problem... and did you try it only with jconfig?   

i tested it as well but what i get it's just a white screen, with allrh instead, it boots with an I/O error and the second screen flipped upside down...

a troll from 1cc was bubbling something about being able to boot with jconfig 2... probably that's the way at the moment... will try later...

 

yo, peace!

 

EDIT

Jconfig stand alone... tried the latest version again, just figured that you have to set a custom res in order to display the game like for TP, unfortunately it gives IO error and the second screen upside down as well, same as with allrh...

my conclusion is that those 1cc trolls talking about being able to play it stand alone are just trolling as usually, so far only TP is capable to boot it properly... yup.. patience...amazing virtue! :very-good:

 

First, of all it boots with Jconfig (needs txac.key) located in the jconfig, there is something called a readme?, then also you need to edit the ini with proper values.

 

 

Modifié par Solo
Posté(e)
1 hour ago, Solo said:

 

First, of all it boots with Jconfig (needs txac.key) located in the jconfig, there is something called a readme?, then also you need to edit the ini with proper values.

 

 

4

 

seriously... readme?? ...what's that??  pappitipooppeee??

Posté(e)
On 4/9/2019 at 10:15 AM, dex77 said:

 

Ok, then TP has a problem... and did you try it only with jconfig?   

i tested it as well but what i get it's just a white screen, with allrh instead, it boots with an I/O error and the second screen flipped upside down...

a troll from 1cc was bubbling something about being able to boot with jconfig 2... probably that's the way at the moment... will try later...

 

yo, peace!

 

EDIT

Jconfig stand alone... tried the latest version again, just figured that you have to set a custom res in order to display the game like for TP, unfortunately it gives IO error and the second screen upside down as well, same as with allrh...

my conclusion is that those 1cc trolls talking about being able to play it stand alone are just trolling as usually, so far only TP is capable to boot it properly... yup.. patience...amazing virtue! :very-good:

Enable players 3/4 in jconfig and set language to chinese/japanese to fix the screen issue 

Posté(e)
22 minutes ago, Harry99710 said:

Enable players 3/4 in jconfig and set language to chinese/japanese to fix the screen issue 

Thanks for the info but we already fixed it with TP yesterday... plus TP enables the online feature which gives you an extra play mode with tons of stuff...

Posté(e) (modifié)
48 minutes ago, dex77 said:

Thanks for the info but we already fixed it with TP yesterday... plus TP enables the online feature which gives you an extra play mode with tons of stuff...

Don't nee to be rude bloke, we are giving you another option of running.

 

Modifié par Solo
Posté(e)
Just now, Solo said:

Don't nee to be rude bloke, we are giving you another option of running.

 that's being sarcastic in my opinion...

PS.

since when you are we? ...lol 

Posté(e) (modifié)
1 minute ago, dex77 said:

 that's being sarcastic in my opinion...

PS.

since when you are we? ...lol 

 

Jconfig has been running Darius Burst for 2-3 years, so when TP was adding support, JConfig already ran it. It's only now the author decided to release the game. We do not shit on TeknoParrot at all, but still be grateful you even get alternatives ways to play arcade games, other than one.

 

We are legion we are many

Modifié par Solo
Posté(e)
Just now, spiderzsoft said:

how? even i can not enter services option.... is there any other way to change language ?????????

no, you change it in the ini file, use the values that solo said

Posté(e)
1 minute ago, spiderzsoft said:

how? even i can not enter services option.... is there any other way to change language ?????????

 

init.ini is the file called.

Posté(e)
37 minutes ago, Solo said:

 

Jconfig has been running Darius Burst for 2-3 years, so when TP was adding support, JConfig already ran it. It's only now the author decided to release the game. We do not shit on TeknoParrot at all, but still be grateful you even get alternatives ways to play arcade games, other than one.

 

We are legion we are many

 

LOL... dude... I'm sorry to tell you this but you're not legion, you are just one... deal with it... 

and by the way, the nonsense flag of legitimacy you are carrying on your back it's just ridiculous as the sound of your rant, deal with this also cause no one cares here

about your pointless crap...  there's a place for this kind of bullshit... it's called 1CC, you should know that as well.

Posté(e) (modifié)
4 hours ago, dex77 said:

 

LOL... dude... I'm sorry to tell you this but you're not legion, you are just one... deal with it... 

and by the way, the nonsense flag of legitimacy you are carrying on your back it's just ridiculous as the sound of your rant, deal with this also cause no one cares here

about your pointless crap...  there's a place for this kind of bullshit... it's called 1CC, you should know that as well.

 

1CC is just a place like /B/ on 4chan, it's not a group who releases dumps or anything, the dumps are handed to people who have special knowledge who later can work to crack and emulate the IO. It's not 1CC or Reaver who decides what gets dumped, it's the author of the arcade who actually made it possible to dump the files.


There are just certain people with certain skills that can do this.

 

Also Legion can be you me, Reaver, Barrack Obama, it's not a group that anyone specifies.

Modifié par Solo
Posté(e)
2 minutes ago, Solo said:

 

1CC is just a place like /B/ on 4chan, it's not a group who releases dumps or anything, the dumps are handed to people who have special knowledge who later can work to crack and emulate the IO. It's not 1CC or Reaver who decides what gets dumped, it's the author of the arcade who actually made it possible to dump the files.

dude, give us all a break... just no one cares... is that crazy to believe? 

Posté(e)
2 minutes ago, dex77 said:

dude, give us all a break... just no one cares... is that crazy to believe? 

Stop calling people trolls when shit actually works on another tool? English, do you speak it? keep the topic to turtorial/support now bye bye :)

Posté(e)

Impossible to have correctly this game un fullscreen.

It is launched with 1920x1080 in fullscreen but it is unplayable. I tried other resolution but it does not start!

Could you tell me wich resolution you use in init.ini please?

Posté(e) (modifié)
1 hour ago, Solo said:

Stop calling people trolls when shit actually works on another tool? English, do you speak it? keep the topic to turtorial/support now bye bye :)

 

LOL... TROLLOL...  LOL...

 

...the only thing i can keep is laughing at you... LOL

Modifié par dex77
Posté(e) (modifié)
23 minutes ago, Safur said:

Impossible to have correctly this game un fullscreen.

It is launched with 1920x1080 in fullscreen but it is unplayable. I tried other resolution but it does not start!

Could you tell me wich resolution you use in init.ini please?

 

Hey Safur, 2720x768 seems to be the base standard resolution for this game, if you wanna use a lower one i think you need ALLRH, just edit the internal resolution, DJExpert left yesterday a video tutorial...

PS.

you need to create a custom res from the GPU settings.

Modifié par dex77
Posté(e) (modifié)
2 hours ago, Safur said:

Impossible to have correctly this game un fullscreen.

It is launched with 1920x1080 in fullscreen but it is unplayable. I tried other resolution but it does not start!

Could you tell me wich resolution you use in init.ini please?

 

2720
768

 

is the offical ones, if you wanna play with fullscreen you have to come up with a custom resolution in AMD and Nvidia driver tool :) I saw someone that were using 1080 instead of 768, you can just edit the ini and do not need gameloader rh.

 

Can look something like this in init.ini then just run the game.exe :)

2720
1080
60
1 <- Fullscreen
0
0
0
0
0
1
0
1 <- Might not work and have to be set to 0,

 

Modifié par Solo
Posté(e)
1 hour ago, dex77 said:

 

LOL... TROLLOL...  LOL...

 

...the only thing i can keep is laughing at you... LOL

Please keep the thread to Support and Tutorial

Posté(e)
4 minutes ago, Solo said:

Please keep the thread to Support and Tutorial

Please change your profile picture, can't take you seriously with that... or just login using your original user name... what is it...  atrfate?

PS.

we are legion and your nick is solo... you don't get the irony?

Posté(e)
27 minutes ago, dex77 said:

Please change your profile picture, can't take you seriously with that... or just login using your original user name... what is it...  atrfate?

PS.

we are legion and your nick is solo... you don't get the irony?

 

Man, dont confuse me with Atrfate we are two different persons :P off-topic again please keep the Darius support and not this offtopic chatter.

Posté(e)
6 minutes ago, Solo said:

 

Man, dont confuse me with Atrfate we are two different persons :P off-topic again please keep the Darius support and not this offtopic chatter.

 

realIy?  ...like Dr.Jekyll and Mr.Hide?  

anyway... it was funny to chat with you but I think I have to give up now since you're more stubborn than my girlfriend's beagle...

I must admit it, you have a true troll heart kiddo...

keep it tight to your chest and be proud of that, it's a rare syndrome... lol

PS.

as an option... just keep in mind you can always GTFO of here as well, no one will miss your help ; )

Posté(e)
On 4/10/2019 at 10:05 PM, dex77 said:

 

realIy?  ...like Dr.Jekyll and Mr.Hide?  

anyway... it was funny to chat with you but I think I have to give up now since you're more stubborn than my girlfriend's beagle...

I must admit it, you have a true troll heart kiddo...

keep it tight to your chest and be proud of that, it's a rare syndrome... lol

PS.

as an option... just keep in mind you can always GTFO of here as well, no one will miss your help ; )

Soo cute little boi want a cookie :) ?

Posté(e)
13 hours ago, NIGHTKILLER05 said:

Solo is helping, I will miss his help if he leaves because trolling.

 

Thank you for your tips Solo !!! 

No problems :)

Posté(e)
4 hours ago, Solo said:

Soo cute little boi want a cookie :) ?

lol... still here trolling? ...I thought you went back to that virgin's heaven for trolls called 1CC... 

don't tell me... now you are back with a friend??  woooo... what a mastermind...

you just won the first prize for genius troll of the week, congrats!!

PS.

change your profile picture!  lol

Posté(e)

1. When I turn on JVS, all my buttons can be used, but the second screen is reversed.
2. When I turn off JVS, I only have 1 to 4P START button to use, but the screen is normal.
So, how can I make this game work?
This is my ini file
2720
1080
60
2
0
1
0
0
0
1
0
2

 

turn off JVS.jpg

turn on JVS.jpg

Posté(e)
On 4/13/2019 at 9:02 PM, dex77 said:

lol... still here trolling? ...I thought you went back to that virgin's heaven for trolls called 1CC... 

don't tell me... now you are back with a friend??  woooo... what a mastermind...

you just won the first prize for genius troll of the week, congrats!!

PS.

change your profile picture!  lol

 

I guess, you are the virgin here, having nothing else to do rather than wanting to be a troll which fails :)

Posté(e)
 
 
1
4 hours ago, Solo said:

 

I guess, you are the virgin here, having nothing else to do rather than wanting to be a troll which fails :)

lol... still here trolling?  ...you must be the smart one of your troll legion... lol

Veuillez vous connecter pour commenter

Vous pourrez laisser un commentaire après vous êtes connecté.



Connectez-vous maintenant
×
×
  • CrĂ©er...