[Tuto] Mario Kart DX Arcade GP 1.10, including banapassport save and online play, QR codes and LAN versus play !

[lessthanzero33]

  Le 02/01/2020 à 16:32, simonbirchnyc a dit :

 

Does anyone know? I am also having this issue. I even created a sv folder in mkdx10 folder and placed the profile.sav file there. Thanks in advance

Développer  

I too would like to know this as well.

 

[sebasterdie]

hey guys i need help to run LAN my machine (2 teknoparrot with MKDX)

i follow the tutorial and its get worst when i assign fix ip adress

i stay at dhcp automatic

 

1st cab 

everything looks fine but see only 1 unit connected

 

2nd cab

gateway is not write in MKDX , but in teknoparrot yess, have check manually the config files

but they see there 2 units connected....

 

ether the two cabs start in normal mode, they never wait for the other players, 

and there a bunch of error on main screen (setup) is it normal ?

 

thanks in advance, people love this games, but they always ask me to play together

 

[Invité Onkel]

  Le 28/02/2020 à 04:32, sebasterdie a dit :

i stay at dhcp automatic

 

Développer  

Nice setup

At home ?

Do not use dhcp on PC's / network

Use a static IP 192.168.1.x   

x=2 or 3 

Where it says 25 put 2 or 3

 

Cross link network cable or switch / router / hub ? 192.168.1.1 ?

[sebasterdie]

  Le 28/02/2020 à 05:18, Onkel a dit :

Nice setup

At home ?

Do not use dhcp on PC's / network

Use a static IP 192.168.1.x   

x=2 or 3 

Where it says 25 put 2 or 3

 

Cross link network cable or switch / router / hub ? 192.168.1.1 ?

Développer  

 an asus router, tested with ethernet cable, and now im on wifi each cab

the router is not connected to internet, maybe there an impact??

 

i will try again to assign port and give you result     see ya thanks

[Invité Onkel]

I would not use wifi

Not connected to internet ..... only if you do not want to use the game save function

No port assign, IP address !

If using internet for save function set windows dns to router ip address that will take of the rest to the internet

Allow in windows firewall tcp and udp or disable firewall permanently

Modifié le 28 février 2020 par Onkel

[sebasterdie]

  Le 28/02/2020 à 06:04, Onkel a dit :

I would not use wifi

Not connected to internet ..... only if you do not want to use the game save function

No port assign, IP address !

If using internet for save function set windows dns to router ip address that will take of the rest to the internet

Allow in windows firewall tcp and udp or disable firewall permanently

Développer  

i work on windows 10,    so ip adress is set         192.168.1.2  1stcab            192.168.1.3     2ncab

 

does i leave dns blanked???

[sebasterdie]

https://ibb.co/02zhPV9
https://ibb.co/b3GVZBB
https://ibb.co/bgkm3DQ

 

now all network status when i assign fix ip adress

 

its strange that they dont react like the other one

 

Modifié le 28 février 2020 par sebasterdie

[Invité Onkel]

subnet 255.255.255.0

DNS 192.158.1.1 (I guess it is your router address)

Otherwise try crosslink cable direct between PC's keep same settings except dns (clean)

[sebasterdie]

  Le 28/02/2020 à 14:32, Onkel a dit :

subnet 255.255.255.0

DNS 192.158.1.1 (I guess it is your router address)

Otherwise try crosslink cable direct between PC's keep same settings except dns (clean)

Développer  

perfect i will order crossover cable right now, just in case of..     

 

i give you some news, thanks for the help     if it work i will add another pair cabinet indi500....for a total of 4 player  

[Torquemada]

  Le 17/06/2019 à 18:04, butflash a dit :

Thank you so much for this guide. All up and running with my wheel on teknoparrot. Awesome game. However. I cannot jump drift. Any clue what I'm doing wrong? Running 1.10.22, using thrustmaster wheel, tried accelerate on buttons and also pedals. Press down on brake while holding accelerate as approaching a corner, but don't jump or drift. Got a feeling I'm missing something obvious. Perhaps the earlier cars don't drift?

Développer  

 

I've got the same issue. I'm playing with a Logitech Momo Racing USB wheel and everything works fine, but the character does not jump when brake pedal is pressed while accelerating. It only works when AutoAccelerate is on. Do you have any ideas?

[sebasterdie]

  Le 01/03/2020 à 10:27, Torquemada a dit :

 

I've got the same issue. I'm playing with a Logitech Momo Racing USB wheel and everything works fine, but the character does not jump when brake pedal is pressed while accelerating. It only works when AutoAccelerate is on. Do you have any ideas?

Développer  

probably pedal are set for combined pedal in thrusmaster software ???    and check the options in teknoparrot

 

[danielsan]

Hi there,

having some troubles on english patching,

it says: "Incorrect MKDX version! Quit!"

I suppose i have an incorrect version of MKDX.

Unable to find an 1.10 dump over Internet... :(

Someone could help me , pleas?

Thanks on advance

[Invité petje]

  Le 29/03/2020 à 18:29, danielsan a dit :

Unable to find an 1.10 dump over Internet... :(

 

Développer  

https://1fichier.com/?q9c3jy3y6jstsidcktxr

[danielsan]

  Le 29/03/2020 à 21:15, petje a dit :

https://1fichier.com/?q9c3jy3y6jstsidcktxr

Développer  

already tried.

link doesnt work

:(

[Invité petje]

  Le 30/03/2020 à 07:28, danielsan a dit :

link doesnt work

 

Développer  

Well it does.

But once again, try here 

Mirror the file !!

https://mega.nz/#!Q1xEECrZ!j2959NgbFGjQnJt-K1GuUlitPANRo5yI5u52_hV_hEA

[ShaolinMonk]

Can anybody tell me. Does the 100 percent save file work with version 1.10. And if so how do you use it. I tried putting the file in the main directory and it does nothing... Can't find this information anywhere...

[Dweebster]

I am having trouble with the online, i seem to keep getting errors to do with AMAuth + MuchCd

 

muchaut/muchaut_nipc_tcp.c:288
Apr  7 15:10:35  WARN 17F8 A1: Connecting daemon failed: MUCHA_ERROR_SYSTEM_NET
Apr  7 15:10:35  INFO 17F8 A1: Starting daemon
Apr  7 15:10:37  INFO 17F8 A1: Connecting daemon
Apr  7 15:10:37  INFO 17F8 CTL: Daemon connected.
Apr  7 15:10:37  INFO 17F8 CTL: Library ident: 2.1-release-0088-9e7a6a10
Apr  7 15:10:37  INFO 17F8 CTL:  Daemon ident: 2.1-release-0088-9e7a6a10
Apr  7 15:10:37  INFO 17F8 A1: state.state_cd = MUCHA_STATE_CD_CONNECTED
Apr  7 15:10:37  INFO 17F8 A1: Connected daemon
Apr  7 15:10:37  INFO 17F8 A1: state.state_tt = MUCHA_STATE_TT_STARTED
Apr  7 15:10:37  INFO 17F8 A1: state.state_dt = MUCHA_STATE_DT_STARTED

 

Apr  6 13:21:49 INFO  : AMUpdater wakeup... Ver:3.1.1-0248-568f263b-Win32-Final
Apr  6 13:21:49 INFO  : AMAuthdConfig section Contents
Apr  6 13:21:49 INFO  :   title         = COCO
Apr  6 13:21:49 INFO  :   lang          = JP
Apr  6 13:21:49 INFO  :   countdoun     = 15
Apr  6 13:21:49 INFO  :   v_resol       = 768
Apr  6 13:21:49 INFO  :   h_resol       = 1360
Apr  6 13:21:49 INFO  :   logfile       = amupdater.log
Apr  6 13:21:49 INFO  :   game_rev      =
Apr  6 13:21:49 INFO  : Load INI File succeed.
Apr  6 13:21:49 INFO  :   File    : M:\Hyperspin\Emulators\TeknoParrot\Games\Mario Kart GP DX\AMCUS\AMConfig.ini
Apr  6 13:21:49 INFO  :   Section : AMAuthdConfig
Apr  6 13:21:49 INFO  : Load INI File succeed.
Apr  6 13:21:49 INFO  :   File    : M:\Hyperspin\Emulators\TeknoParrot\Games\Mario Kart GP DX\AMCUS\AMConfig.ini
Apr  6 13:21:49 INFO  :   Section : MuchaDtModeConfig
Apr  6 13:21:49 INFO  : Load INI File succeed.
Apr  6 13:21:49 INFO  :   File    : M:\Hyperspin\Emulators\TeknoParrot\Games\Mario Kart GP DX\AMCUS\AMConfig.ini
Apr  6 13:21:49 INFO  :   Section : MuchaAppConfig
Apr  6 13:21:49 INFO  : Load INI File succeed.
Apr  6 13:21:49 INFO  :   File    : M:\Hyperspin\Emulators\TeknoParrot\Games\Mario Kart GP DX\AMCUS\AMConfig.ini
Apr  6 13:21:49 INFO  :   Section : MuchaSysConfig
Apr  6 13:21:49 INFO  : Load INI File succeed.
Apr  6 13:21:49 INFO  :   File    : M:\Hyperspin\Emulators\TeknoParrot\Games\Mario Kart GP DX\AMCUS\AMConfig.ini
Apr  6 13:21:49 INFO  :   Section : MuchaCAConfig
Apr  6 13:21:49 ERROR : Change resolutions... width = 640, height = 480
Apr  6 13:21:50 INFO  : Start Main Loop
Apr  6 13:21:51 IWindowControl‚̎擾‚ÉŽ¸”s‚µ‚Ü‚µ‚½B80040154
Apr  6 13:21:51 Compress Info  : log file 3 - open failed.
Apr  6 13:21:51 INFO  : End Main Loop
Apr  6 13:21:51 INFO  : AMUpdater good-bye...

 

any help would be grateful

[nohero]

  Le 02/04/2020 à 19:36, ShaolinMonk a dit :

Can anybody tell me. Does the 100 percent save file work with version 1.10. And if so how do you use it. I tried putting the file in the main directory and it does nothing... Can't find this information anywhere...

Développer  

 

Here it works but not with TeknoParrot.

I'm using JConfig ( there's a pack for mkdx that has everything you need ) and I run the game from its .exe with admin right.

I placed the profile.bin file from the pack mentioned before in the sv folder created by JConfig.

There are many tracks not unlocked but it's not s problem because I'm having fun to unlock these by myself, then the game save progress on the profile.bin file.

All items, characters and cars are unlocked.

 

Hope this help!

 

CHEERs

Modifié le 8 avril 2020 par nohero

[dandydan25]

having problems with card save (banapass). I got my MKDX player code from the teknoparrot site but the when i card in to the game, it will time out from “Checking Banapassport Data”. Currently using TP 1.0.0.326

[bobparr]

Hi ! I've the same problem,  I've created an MKDK account on Teknoparrot, but i can't log a banapassport...

[ZedoniusARG]

Same problem with bananapass. 2 days back not problem

[Squeekstyle]

Banapassport was working yesterday but is currently timing out. You can ping 51.15.85.127 but it never connects.

[nohero]

Guys, I need a little help with a DInput wheel, it's a T500RS.

 

I can't use boost with it and it's configurated well at least with JConfig and TeknoParrot ( in DInput because in XInput it's not recognized by both ).

 

Any help is highly appreciated.

 

 

CHEERs

Modifié le 23 avril 2020 par nohero

[Distray]

I'm back, and I've encountered a new error:

"Runtime Error!

Program:

 

This application has requested the Runtime to terminate it in an unusual way.

Please contact the application's support team for more information."

I'm running it with admin privileges and an NVIDIA graphics card.

[Invité petje]

  Le 23/04/2020 à 13:00, nohero a dit :

I can't use boost with it and it's configurated well at least with JConfig and TeknoParrot ( in DInput because in XInput it's not recognized by both ).

 

Développer  

You got MKDX version 1.10 ?

[Distray]

I just figured out how to fix Mario Kart Arcade GP DX, but a new problem: Everything wireless on my PC doesn't work anymore.

Even with a bootable Linux Mint drive, the wireless is no longer working.

[Invité petje]

  Le 25/04/2020 à 19:43, Distray a dit :

Even with a bootable Linux Mint drive, the wireless is no longer working.

Développer  

Well it looks like not a problem on the windows side, if a seperate O.S. also has that problem 

Build-in, USB or PCI ?

What did you do to get into this situation ?

Modifié le 25 avril 2020 par petje

[Distray]

USB.

I tried to get to the titlescreen, using the super-admin account.

[Invité petje]

  Le 25/04/2020 à 21:04, Distray a dit :

I tried to get to the titlescreen, using the super-admin account.

Développer  

Title screen of what, MKDX ?

Run teknoparrot and the MKDX .exe (MK_AGP3_FINAL.exe) as admin (set in file properties right click) 

https://www.top-password.com/blog/make-your-program-always-run-as-administrator/

 

Remove USB wifi drivers, remove usb wifi, restart system, insert usb wifi (in other usb slot if needed) reinstall drivers again ?

 

[nohero]

  Le 25/04/2020 à 09:31, petje a dit :

You got MKDX version 1.10 ?

Développer  

 

Yes with english translation.

 

 

[Invité petje]

  Le 26/04/2020 à 00:39, nohero a dit :

 

Yes with english translation.

 

 

Développer  

Drift boost works fine for me on my DInput Logitech Momo Red

I asked for the version number, because as far as i know version 1.00 has no drift boost

 

[nohero]

How did you do it?

In TeknoParrot last version if I set a DInput controller drift boost doesn't work, same thing for JConfig.

Using TeknoParrot I can't setup a DInput controller if I keep XInput option checked but when I remove the check I can setup the buttons but in game drift boost doesn't work, no jump when I push the brake.

Here only in XInput drift boost works both in TP and JConfig.

 

Can you tell me more about how you set it up? 

 

Thanks

[Scheang]

Hi,

After I select the driver (character), the game skips past the kart selection. There's no option to choose the karts.

[Keroro]

Hello people, any way to play at 1080P?

I try several download, several .exes and nothing, I cant put the game in 1080p.

There is any .ini o similar to change o config the resolution?

 

Thanks!

[Invité petje]

  Le 30/04/2020 à 01:25, Keroro a dit :

Hello people, any way to play at 1080P?

I try several download, several .exes and nothing, I cant put the game in 1080p.

There is any .ini o similar to change o config the resolution?

 

Thanks!

Développer  

http://www.emuline.org/applications/core/interface/file/attachment.php?id=7017Recherche des informations…

Resolution changer

[Keroro]

  Le 30/04/2020 à 02:01, petje a dit :

http://www.emuline.org/applications/core/interface/file/attachment.php?id=7017Recherche des informations…

Resolution changer

Développer  

 

Muchas gracias @petje también eres de España, verdad?

 

Works fine! Only in teknoparrot and with graphicall issues, but works... but you know how can I use this fix in jconfig?

Or anyone knows how to enable the (INSERT COIN) Key in TP

Modifié le 1 mai 2020 par Keroro

[GegeT2]

bonjour a tous etant donné que le bana passport ne fonctionne plus j'ai récupéré une sauvegarde 100% unlocked avec un fichier profile .sav mais je crois qu'il n'est pas compatible teknoparrot, est ce que qq un porrait me dire si on peut trouver des sauvgarde bana passport all unlocked. ou se trouve le dossier des saves, dans le jeu ou dans les dossiers tekno? merci