[Tuto] Sega Rally 3 How to Install, including LAN versus play. Secret cars unlock, And Window$ 10 1903+ solution !

[Invité linglang]

Sega Rally 3 (Sega Europa R)

http://www.system16.com/hardware.php?id=907

Does NOT work on Window$ 10 1809 revision (October 2018) and later !!!

Works fine on TeknoParrot 1.0.0.125 in Window$ 10 (1803 April 2018 revision)

So if you want to play this game you got to fall back to Window$ 10 (1803 April 2018 revision)

Read this tutorial, to make a dual boot system, one for gaming this game and others which have problems, one for other things on a up to date Window $ 10.

 

 

SOLVED !!!!

https://teknogods.github.io/compatibility/sr3.htm

Thanks @Nezarn

Executable file is /Game Folder/Rally/Rally.exe

 

Above solution, breaks Operation Ghost.

 

Remember, some games do not like to work standalone, when it is VS play, network configurated.

 

Network config should be easy, when you can ping your other computer you are almost done.

I recommend to use static IP adresses on your network cards.

https://kb.netgear.com/27476/How-to-set-a-static-IP-address-in-Windows

First make note / pictures of the original settings in the service menu before you change them !

You are going to configurate the settings for Versus play on two PC's.

The game will probably not work standalone with these network VS settings.

 

Go to the game folder, go to /Shelldata.

Game.ini contains the parameters you can use in the Gamesettings.ini file.

Shelldata.ini is the interesting one.

Change the fourth line to Twin. 

[GameSettings]
CabinetType=Twin (On both PC's)

 

Down below in te Gamesettings.ini file use these settings.

[Network]
CabinetID=1 
Enabled=1

 

CabinetID=1 is for the left cabin.

CabinetID=2  is for the right cabin. 

 

Start these games on both PC's.

 

Sega Rally 3 Attract mode on two screens looks, awesome !

 

Secret cars unlock.

Bowler Nemesis

McRae Enduro

 

Quick Race mode features a race over multiple laps of a single track against a grid of 5 opponent cars.

The secret Rally Raid cars are accessible in this mode.

These can be chosen by perform- ing the following action:

If the player holds down the brake pedal on the car select screen for one second,

the WRC cars are replaced by the bonus ones and the time available to select a car resets.

If the brake is released, the WRC car selections return but the timer continues unchanged.

Subsequent triggering of the bonus cars does not reset the timer.

 

Source:

https://segaretro.org/images/9/9a/SegaRally3_EuropaR_UK_Manual_Twin.pdf

Page 41 Quickrace

 

Enjoy !

 

I hope that this tutorial helps other people out.

It takes you a few moments to read, but it took me all night to figure it out.

When you get the game working, thanks to this "manual", please give a thanks at this post.

 

And a BIG thanks for the people who originally uploaded the games, we all can enjoy (if you do it right) !!!

And of course all the people involved in, the game loaders and JVS I/O emulation applications we use, and all the people I "forgot".

 

Also look at the posts below, some members / people add helpful information, thank them also .....

Modifié le 17 octobre 2019 par linglang

[Philster1967]

Can confirm this works on windows 10 1809. Absolutely 100% easy to follow instructions. Thank you so much 

[ssphaneuf]

question, i read the manual a little, is it possible to play up to 6 cabs or "players" even on TP? For example the config.ini file says "twin" and i know u can change it to deluxe, does that then give you the option to change the cabs ranging from 1-6

 

 

Modifié le 13 octobre 2019 par ssphaneuf

[Invité linglang]

@ssphaneuf 

Could you RTFM ?

According to the manual on page 118 ..... 120

https://segaretro.org/images/9/9a/SegaRally3_EuropaR_UK_Manual_Twin.pdf

I recommend setting fixed IP addresses on your PC's

192.168.X.2 through 192.168.X.7 (X = 0 or 1) 192.168.X.1 is your modem / router / switch / hub. 

Modifié le 13 octobre 2019 par linglang

[neozore]

Quelqu'un peut nous expliquer ça en Français svp ? Je suis pas nul en anglais (quelques notions), mais là je bloque un peu 

 

On peut pas lancer le jeu sans modifier l'IP statique ? J'ai pas trop envie de toucher à ce type de réglages personnellement. Une aide (en Français) serait la bienvenue.

[Invité petje]

22 minutes ago, neozore said:

Je suis pas nul en anglais

ShellData/GameSettings.ini

 

[GameSettings]
SPEEDO=Km/h
VIEW=Chase
LANGUAGE=French
DIFFICULTY=Easy
CONTINUES=On
RACELENGTH=2

 

 

Options

#Game Author Settings
[SPEEDO]
Option1=Mph
Option2=Km/h

[VIEW]
Option1=Bonnet
Option2=Bumper
Option3=Chase

[LANGUAGE]
Option1=English
Option2=French
Option3=Italian
Option4=German
Option5=Spanish

[DIFFICULTY]
Option1=Medium
Option2=Hard
Option3=Easy

[CONTINUES]
Option1=On
Option2=Off

[RACELENGTH]
Option1=3
Option2=4
Option3=2

 

 

Modifié le 1 janvier 2020 par petje

[neozore]

Thank you petje,

But my problem is not the setting folder. The game won't start since the last Windows 10 update (they say you have to change static IP Adress and modify FFDshow video filter).

 

i've tried your solution linglang

https://teknogods.github.io/compatibility/sr3.htm

 

But the problem is the same (texture memory error).

I can see many people having this problem, for me it's not solved 

Modifié le 2 janvier 2020 par neozore

[neozore]

re-bonjour,

 

Je cherche à avoir une explication précise pour faire marcher "Sega Rally 3" avec Windows10.

Je suis allé voir le fix, mais c'est pas très clair (dans la langue de Shakespeare).

Ok donc visiblement une mise à jour récente de Windows 10 a planté le jeu. Avant il marchait mais maintenant il marche plus, aussi simple que ça 

Du coup j'ai essayé de configurer le filtre video FFDshow, de modifier les settings, mais rien de rien… Il semble que la nouvelle mise à jour plante la mémoire.

Faites part de vos expériences, si quelqu'un a réussi à le faire marcher on est preneur (après la version 1809 bien sûr).

Modifié le 2 janvier 2020 par neozore

[Invité petje]

4 hours ago, neozore said:

re-bonjour,

Shakespearian language

Difficulty with it ?

Use google chrome it can translate webpages automaticaly

Just tested it on a up to date windows 10 1909 OS build 18363.535 with teknoparrot 1.0.0.264 SR3 works fine

 

 

[neozore]

I'm not so bad, but sometimes it's a little difficult to understand technical clarifications (sorry i dont like chrome, my browser is opera)

I have 1909 version too and he doesn't work.

It's impossible for me to revert latest version (after 10 days) :

https://answers.microsoft.com/en-us/windows/forum/all/memory-crash-after-installing-upgrade-version-1903/ed009d14-454f-4003-b945-cd2090f4403f

 

Many people have the same problem. What's the solution ?

 

Thanks

Modifié le 2 janvier 2020 par neozore

[neozore]

Yet I have the same version of teknoparrot as you, with more than twenty games installed… But Sega Rally 3 won't work 

 

Modifié le 2 janvier 2020 par neozore

[TekNoLogic2020]

Hi everyone. Is there any way to get into the bios/test menu? Teknoparrot doesn't have a switch for it in game settings. Also are there any guides as to the graphics settings? I'm currently using these but wondered what the parameters are for either going higher or lower. I'd like to max them out if possible. Thanks.

 

AdapterOrdinal=0
RenderDevice=Hardware
AdapterFormat=X8R8G8B8
HorizontalResolution=1920
VerticalResolution=1080
BackBufferFormat=A8R8G8B8
DepthStencilFormat=D24S8
AntiAliasingLevel=2
MultisampleType=2
MultisampleQuality=0
GraphicQuality=2
ShadowQuality=2
ReflectionQuality=2
TrackQuality=2
SceneQuality=2
TextureQuality=2
ShaderQuality=2
DrawDistanceQuality=2
ParticleQuality=2
RearViewMirrorQuality=2
MudQuality=2
VSync=1
ShaderVersion=3
RunWindowed=0
RefreshRate=120
ResolutionFilter=1

 

[Invité student123]

On 2/23/2019 at 1:09 PM, linglang said:

Sega Rally 3 (Sega Europa R)

http://www.system16.com/hardware.php?id=907

Does NOT work on Window$ 10 1809 revision (October 2018) and later !!!

Works fine on TeknoParrot 1.0.0.125 in Window$ 10 (1803 April 2018 revision)

So if you want to play this game you got to fall back to Window$ 10 (1803 April 2018 revision)

Read this tutorial, to make a dual boot system, one for gaming this game and others which have problems, one for other things on a up to date Window $ 10.

 

 

SOLVED !!!!

https://teknogods.github.io/compatibility/sr3.htm

Thanks @Nezarn

Executable file is /Game Folder/Rally/Rally.exe

 

Above solution, breaks Operation Ghost.

 

Remember, some games do not like to work standalone, when it is VS play, network configurated.

 

Network config should be easy, when you can ping your other computer you are almost done.

I recommend to use static IP adresses on your network cards.

https://kb.netgear.com/27476/How-to-set-a-static-IP-address-in-Windows

First make note / pictures of the original settings in the service menu before you change them !

You are going to configurate the settings for Versus play on two PC's.

The game will probably not work standalone with these network VS settings.

 

Go to the game folder, go to /Shelldata.

Game.ini contains the parameters you can use in the Gamesettings.ini file.

Shelldata.ini is the interesting one.

Change the fourth line to Twin. 

[GameSettings]
CabinetType=Twin (On both PC's)

 

Down below in te Gamesettings.ini file use these settings.

[Network]
CabinetID=1 
Enabled=1

 

CabinetID=1 is for the left cabin.

CabinetID=2  is for the right cabin. 

 

Start these games on both PC's.

 

Sega Rally 3 Attract mode on two screens looks, awesome !

 

Secret cars unlock.

Bowler Nemesis

McRae Enduro

 

Quick Race mode features a race over multiple laps of a single track against a grid of 5 opponent cars.

The secret Rally Raid cars are accessible in this mode.

These can be chosen by perform- ing the following action:

If the player holds down the brake pedal on the car select screen for one second,

the WRC cars are replaced by the bonus ones and the time available to select a car resets.

If the brake is released, the WRC car selections return but the timer continues unchanged.

Subsequent triggering of the bonus cars does not reset the timer.

 

Source:

https://segaretro.org/images/9/9a/SegaRally3_EuropaR_UK_Manual_Twin.pdf

Page 41 Quickrace

 

Enjoy !

 

I hope that this tutorial helps other people out.

It takes you a few moments to read, but it took me all night to figure it out.

When you get the game working, thanks to this "manual", please give a thanks at this post.

 

And a BIG thanks for the people who originally uploaded the games, we all can enjoy (if you do it right) !!!

And of course all the people involved in, the game loaders and JVS I/O emulation applications we use, and all the people I "forgot".

 

Also look at the posts below, some members / people add helpful information, thank them also .....

Hi,

 

Seems this fix breaks a few games with RH loader, for example KOF XIII and KOF XIII Climax. Any way to have an ahk load and unload these settings just when Sega Rally 3 runs?

[eathearty1]

1 hour ago, student123 said:

Hi,

 

Seems this fix breaks a few games with RH loader, for example KOF XIII and KOF XIII Climax. Any way to have an ahk load and unload these settings just when Sega Rally 3 runs?

Yes it breaks lots of games has anyone the notes on how to reverse this fix ive looked all over the site but cant find those notes anywhere link would be appreciated

 

[Invité petje]

On 1/11/2020 at 9:37 PM, eathearty1 said:

Yes it breaks lots of games has anyone the notes on how to reverse this fix ive looked all over the site but cant find those notes anywhere link would be appreciated

I guess these steps to make Sega Rally 3 work on windows 10 1903 

But in reverse ?

 

Windows 10 1809 (and newer) crashfix

• 1. Download and install LAVFilters
• 2. Open up "LAV Video Configuration"
• 3. Go to "Formats" and untick "Use Microsoft WMV9 MFT decoder for WMV3 and VC-1"
• 4. Download and run Codec Tweak Tool
• 5. Select "Preferred decoders" under "Win7DSFilterTweaker"
• 6. Scroll down under "## 32-bit decoders ##" to WMV1
• 7. Select LAV Video for "WMV1", "WMV2", "WMV3" (and optionally "WMVA")
• 8. Click Apply and then close it.

 

Better solution below !!!

Modifié le 27 mai 2020 par petje

[pillemats]

i cant get it to work

 

i can only see se SR3 Loading screen and it loops

 

After that it crashes and i get this message:

 

out of memory for tex

 

What is the solution ?

 

 

my hw is core2duo and gtx 1050ti

Modifié le 18 avril 2020 par pillemats

[pillemats]

Am 11.1.2020 um 21:55 schrieb petje:

I guess these steps to make Sega Rally 3 work on windows 10 1903 

But in reverse ?

 

Windows 10 1809 (and newer) crashfix

• 1. Download and install LAVFilters
• 2. Open up "LAV Video Configuration"
• 3. Go to "Formats" and untick "Use Microsoft WMV9 MFT decoder for WMV3 and VC-1"
• 4. Download and run Codec Tweak Tool
• 5. Select "Preferred decoders" under "Win7DSFilterTweaker"
• 6. Scroll down under "## 32-bit decoders ##" to WMV1
• 7. Select LAV Video for "WMV1", "WMV2", "WMV3" (and optionally "WMVA")
• 8. Click Apply and then close it.

this works, but i only have a black screen....

i can see the hud and have sound but noithing else

[Invité petje]

On 4/18/2020 at 11:30 AM, pillemats said:

i can see the hud and have sound but noithing else

I did 1 -7 but, only selected LAV Video for "WMV1"

Not WMV2, WMV3

 

Well i was wrong

I only selected 32 bit WMV3 (lav video) 

 

Better solution below !

Modifié le 27 mai 2020 par petje

[pillemats]

i did the same... but only menu and the rest is black

[pillemats]

any solution ?

 

 

[you981]

Is there a way I can assign it to my analog type sidebrake?
It works when assigned to a button on the keyboard, but not when assigned to an analog type sidebrake. Can you tell me how to do it? Or is there no choice but to give up?

TeknoParrot version:1.0.0.341

 

 

Today I updated TeknoParrot. Ican do that!

Thanks

 

Modifié le 29 avril 2020 par you981

[pillemats]

Am 18.4.2020 um 07:31 schrieb pillemats:

i cant get it to work

 

i can only see se SR3 Loading screen and it loops

 

After that it crashes and i get this message:

 

out of memory for tex

 

What is the solution ?

 

 

my hw is core2duo and gtx 1050ti

always this problem.... had anyone a solution ?

 

[Tuflyer]

En 1/5/2020 a las 12:14, pillemats dijo:

always this problem.... had anyone a solution ?

yes¡ i have the same problem¡ ohh doas anyone have a solution for this please?

thanks¡

[Invité petje]

On 4/19/2020 at 3:07 PM, pillemats said:

i did the same... but only menu and the rest is black

 

On 5/9/2020 at 11:21 PM, Tuflyer said:

yes¡ i have the same problem¡ ohh doas anyone have a solution for this please?

 

My settings to make SR3 work, but then KOF XIII (Climax) crashes when attract mode video starts

https://imgshare.io/image/preferred-directshow-decoding-filters-in-windows-10-1809.N6xaA4

 

Sorry i was wrong with WMV1, it is WMV3 ......

 

Better solution below !

Modifié le 27 mai 2020 par petje

[pillemats]

i changed vmv1 to wmv3 but it dont work

[ISOHaven]

I'm in the same boat.  Win10 1909.  At first the game crashed with some D3D error.  Once I did the supplied fix the game started.  I get to the SR3 main logo screen, it says Insert Credit(s) and nothing responds.  Wont work for Keyboard or xInput.  Run TP as admin or not, same thing.

Win 10 1909

TP 194

UI 372

[pillemats]

is there a solution for black screen ?

[DarkVoid666]

Am 10.5.2020 um 04:53 schrieb petje:

Windows 10 1809 (and newer) crashfix

• 1. Download and install LAVFilters
• 2. Open up "LAV Video Configuration"
• 3. Go to "Formats" and untick "Use Microsoft WMV9 MFT decoder for WMV3 and VC-1"
• 4. Download and run Codec Tweak Tool
• 5. Select "Preferred decoders" under "Win7DSFilterTweaker"
• 6. Scroll down under "## 32-bit decoders ##" WMV3
• 7. Select LAV Video for "WMV3"
• 8. Click Apply and then close it.
•  

  My settings to make SR3 work, but then KOF XIII (Climax) crashes when attract mode video starts

  https://imgshare.io/image/preferred-directshow-decoding-filters-in-windows-10-1809.N6xaA4

...

Great, thanx for the tip, that worked for me.
Win 10 Pro 1909

Nvidia 1070 TI
Latest TP/UI
Sega Rally 3 loads and plays perfectly now, FFB is also working.
Haven't checked if it has a negative effect on other games, though.

Modifié le 27 mai 2020 par DarkVoid666

[Invité petje]

13 hours ago, DarkVoid666 said:

Haven't checked if it has a negative effect on other games, though.

It does on some, so here is a better solution

Reverse the settings in Codec tweak tool 

Read instructions in original post

Thanks to @EmuAl http://www.mediafire.com/file/tsvzab3ae28n4rl/Videos.zip/file

Modifié le 27 mai 2020 par petje

[DarkVoid666]

vor 48 Minuten schrieb petje:

It does on some, so here is a better solution

Reverse the settings in Codec tweak tool 

Read instructions in original post

Thanks to @EmuAl http://www.mediafire.com/file/tsvzab3ae28n4rl/Videos.zip/file

Yes, works fine, thank you very much;-)

[pillemats]

i tried this but always the same problem with black screen....

 

any other solution ?

[xbrunox]

any solution for service menu in sega rally3? i cant enter and i cant set lan game. pls can someone help me.

[vitamina]

sorry but i start sega rally with teknoparrot and game loader rh all but.... when start with game loader rh all input not work and when start with teknoparrot input work where is the problem?

thanks

[Invité POPO69]

salut les amis ...pourquoi Rally bug? je peux aller jusqu'a la selection de la voiture et quand la course demarre plus rien? pourtant j'ai testé la procedure.

Par ailleurs en voulant copier le FIXE pour le 16/10 rally.exe je me retrouve avec un une version qui me demande de crediter sauf qu'aucune touche ne le permet...pourquoi? merci pour votre aide

j'ai pris la source ici

https://pool389.seedbox.fr/files/index.php/s/wLsa9rWPiA42Q6Y?path=%2FSR3%2FPatch

 

Modifié le 21 novembre 2020 par POPO69

[clos2345]

Looking for some help please. When playing Sega Rally 3 on the latest version of Teknoparrot using an Xbox One controller,  the car pulls left slightly. I’ve tried both sTo0z Zone and moving sliders but that still doesn't fix it. 
 

It’s actually a very similar thing to what Sonic & Sega All-Stars Racing does as cars also pulled to the left in that game prior to applying the calibration patch; however, I don’t see a similar patch for Sega Rally 3.  Since both are Sega games, I figured maybe they suffered from the same calibration issue.  Anyway, I appreciate anyone that can help or provide the calibration patch if one exists.

[JulesVerne]

On 1/29/2021 at 2:21 AM, clos2345 said:

Looking for some help please. When playing Sega Rally 3 on the latest version of Teknoparrot using an Xbox One controller,  the car pulls left slightly. I’ve tried both sTo0z Zone and moving sliders but that still doesn't fix it. 
 

It’s actually a very similar thing to what Sonic & Sega All-Stars Racing does as cars also pulled to the left in that game prior to applying the calibration patch; however, I don’t see a similar patch for Sega Rally 3.  Since both are Sega games, I figured maybe they suffered from the same calibration issue.  Anyway, I appreciate anyone that can help or provide the calibration patch if one exists.

You need to go into the ShellData directory.  Edit ShelData.ini.  Here is mine for reference:

 

[Credit]
Freeplay=1
[GameSettings]
CabinetType=Twin
RatingScreen=0
MotionBaseOK=0
MotionBaseThreshold=60
MotionBaseTestDuration=3
MotionBaseFailCount=3
ScreenGapExternal=9
ScreenGapInternal=9
[Audio]
MusicVolume=80
SFXVolume=70
VoiceVolume=80
AttractMusic=0
[CalibrationData]
AccelUp=0
AccelDown=255
BrakeUp=0
BrakeDown=255
SteeringLeft=0
SteeringRight=255
FeedbackStrength=2
MotionBaseStrength=2
SteeringCentre=128
[Network]
CabinetID=1
Enabled=1

[kalinium]

Hi,

Weird problem. 

I have a twin cabinet, everything was working great, LAN connection was flawless. 

Don't know what happened, but now it works only when the RIGHT car is defined as cabinetID=1 and the LEFT car is cabinetID=2. 

When trying the correct way (left is 1, right is 2) The cars don't connect, and both state and play as "main" on the logo screen. 

Tried many things, any ideas? 

Thanks.