[Arcade PC] Fast & Furious SuperCars (Raw Thrills)

[arcade_power]

Just like F&F Super Cars (without the fps fix), Tokyo Drift is running too fast in the attract mode. Is there a way to fix this? Now that we got a fps fix for Super Cars, it would be great to have a similar fix for Tokyo Drift. Enable V-sync in Nvidia settings for the EXE doesn't help at all. Suggestions?

[7zxkv]

FnF HD

 

 

[camranbant]

Anyone know where the rest of the cars are? all the Dodge/Saleen cars are missing

[LEGEND80]

@7zxkv

How can I use the HD switches in conjunction with the launcher? Works fine with the standalone sdaemon but I created a bat file passing in the switch to the launcher but it was still low res.

[Moksi]

i hope somebody manage to get these Fnf games to work with steering wheel

G27 ova here

[jaydee1977]

Here is another good explanation of UCR

https://medium.com/@thedoteater/ucr-x360-controller-support-for-multiplayer-from-single-hid-tutorial-c4801663b89f

 

[lokofer]

could someone please upload the configured UCR for xbox controller ? thanks :D

[Athlonazu385]

  Le 13/03/2019 à 06:28, arcade_power a dit :

Does this mean we can see Super Bikes 2 being released soon as well? It's the last game in the F&F series, so would be nice to have the whole series! 

Développer  

Well so far the dongle and files has been dumped already but we haven't found the I/O Board crack yet

[arcade_power]

  Le 13/03/2019 à 23:37, Athlonazu385 a dit :

Well so far the dongle and files has been dumped already but we haven't found the I/O Board crack yet

Développer  

That's great, well, hopefully someone can provide us with a I/O board crack soon. Thanks for the info! 

[Athlonazu385]

  Le 13/03/2019 à 10:34, trick72 a dit :

So nice. Anyone got LAN/Network LINK working?

 

Développer  

So far not but i have been experimenting with MOHKERZ's Launcher and sdaemon files under my copy of supercars version 3.59 which i got the game to finally run but i still have to use a xbox 360 controller until the keyboard patch comes out but you can press esc on your keyboard to close the game with no errors but in order to boot the service menu you have to press the back button on your controller to enter the service menu then the keyboard functions work in the menu so you can change the settings using Arrow keys, Backspace, Enter, and Space Bar so i can enable the networking under the System Adjustments tab then there's an option saying Current Machine ID but it says no networking as Default so press enter then select Machine ID Number then that's it reboot the game after that you should see Starting Link System but it does appear to show the ip address in the service menu for now so i just have to run it on my Optiplex 740 Enhanced PC and set that one to machine 2 but i will be experimenting with it more but I'll let you know if it does or not.

[Athlonazu385]

  Le 13/03/2019 à 23:46, arcade_power a dit :

That's great, well, hopefully someone can provide us with a I/O board crack soon. Thanks for the info! 

Développer  

No Problem

[Athlonazu385]

  Le 12/03/2019 à 19:56, arcade_power a dit :

Help is always appreciated. However my issue was not getting the game boot in full screen. The small "problem" I have is that the game is running too fast in the atttract mode and after you have finish a race (the high score list is too fast). It's not an issue gameplay wise, but it would be nice if there was a fix that let's the game run in normal speed during attract mode etc. I tried what Mohkerz said about adding -30fps after noerr in the Mohzerz.ini file but that didn't help.

Développer  

There is a program i always use which is called Riva Tuner by Guru3D that will allow me to limit the FPS to 60 all the time until you close out the program no matter what the application is it limits the fps in Arcade Games,  Emulators, Videos, and other Miscellaneous Programs

[Ratface]

I'm having a problem extracting with 7z.  I used the password that was provided. I also tried extracting with WinRar..... It only partially extracted some of the folders and files.  Any help on this one guys?

 

[Athlonazu385]

  Le 14/03/2019 à 00:16, Ratface a dit :

I'm having a problem extracting with 7z.  I used the password that was provided. I also tried extracting with WinRar..... It only partially extracted some of the folders and files.  Any help on this one guys?

 

Développer  

It extracts all the files in one folder unless your antivirus is deleting some certain files even if it doesn't show that the file has been moved to a virus chest you should go check your settings

[Athlonazu385]

  Le 14/03/2019 à 00:28, Athlonazu385 a dit :

It extracts all the files in one folder unless your antivirus is deleting some certain files even if it doesn't show that the file has been moved to a virus chest you should go check your settings

Développer  

And also WinRaR will extract all of those 500MB files automatically to one folder

[LEGEND80]

Has anyone got the HD patch working posted on pg3? Not sure how to get it working with the game launcher....

Modifié le 14 mars 2019 par LEGEND80

[Athlonazu385]

  Le 14/03/2019 à 00:44, LEGEND80 a dit :

Has anyone got the HD patch working posted on pg2? Not sure how to get it working with the game launcher....

Développer  

Not yet but it seems like my experiment supercars files actually work full 1080p but for now if you set your screen resolution to 1600x900 it should fix the problem for you for now until it gets fixed.

[LEGEND80]

I did not follow that at all. Literally read that 10 times and I'm more confused now.

 

I copied over the HD file and I can run it in high res just fine via executing the sdaemon file but there is no proper input. So I need the launcher but it didn't work when I made a bat file to add the resolution switch. I don't think you can pass in params to the launcher...

Modifié le 14 mars 2019 par LEGEND80

[Athlonazu385]

  Le 14/03/2019 à 01:34, LEGEND80 a dit :

I did not follow that at all. Literally read that 10 times and I'm more confused now.

 

I copied over the HD file and I can run it in high res just fine via executing the sdaemon file but there is no proper input. So I need the launcher but it didn't work when I made a bat file to add the resolution switch. I don't think you can pass in params to the launcher...

Développer  

As Default Raw Thrills only set the Screen Resolution with 1366x768 and 1920x1080 HD Only! Enter Display Properties then set your computer's monitor settings from recommended resolution to 1600x900 (HD) then it will work with the launcher without any patches. I never had problems since then.

[Athlonazu385]

Then run the launcher then it should work! if you don't like it then wait for a patch!

[LEGEND80]

  Le 13/03/2019 à 13:54, 7zxkv a dit :

FnF HD

 

 

Développer  

@Athlonazu385 I'm referring to this ^

 

What you're saying just doesn't make sense in the context of the HD sdaemon provided there. I think we're talking about two different things.... You stated Raw Thrills supports 2 resolutions...but then I have to set to a 3rd resolution?? in my display properties? and then that'll allow the launcher? to start without patches? What patches? Which launcher - there's two (FNFSC_LAUNCHER_v5 & MohkerzLoaderz.exe) .

 

Forgetting the resolution stuff, the FNFSC launcher works fine, but Mohkerz crashes before gameplay no matter what FYI.

 

I'm just trying to figure out how to set the resolution (specifically -res19) using the patched sdaemon above, on the FNFSC launcher (to have proper controls), with the switches below:

 

From README:

 

The following resolutions can be obtained by using command line arguments.
There is a problem, please ignore.
Thanks to MOHKERS

 

No arguments = 1366x768
-res5760 = 3840x2160
-res4800 = 3440x1440
-res19   = 1920x1080
-res16   = 1600x900
-res10   = 3200x1800
-res8    = 2560x1440
-res6    = 2560x1080
-res5    = 1280x960

Modifié le 14 mars 2019 par LEGEND80

[Mohkerz]

  Le 13/03/2019 à 19:44, lokofer a dit :

 

Développer  

Please read this.... 

 

Resolution switches in exe are broken, all ui etc will be offscreen or worse. Only res10 is good and is default. 

Game need a smart patch like ducon did for FnF drift. 

To adjust to fullscreen just modify res in dxwnd.dxw file as stated before. Thats all, game will be fullscreen but 1360x768....

 

Then... To only use Mohkerz loader without launcher, you have to paste the whole game folder to c:/rawart.   

 

Finally, to give a machine id, its like all FnF from raw thrills... Run game with switch: -mid1 or -mid2 and else... 

Modifié le 14 mars 2019 par Mohkerz

[lokofer]

so you can only play the game if you have a REAL xbox controller ? :( too bad

[arcade_power]

  Le 14/03/2019 à 11:13, lokofer a dit :

so you can only play the game if you have a REAL xbox controller ? :( too bad

Développer  

I think that's the case, but it is the best experience to play with Xbox 360 controller. Playing these Raw thrills games with keyboard is more difficult if you ask me. 

[Mohkerz]

Any gamepad can be a 360 pad with x360ce. 

Any keyboard can br a 360 pad with x360kb. 

Nuff said... Why redo whats already working ? 

[Athlonazu385]

  Le 14/03/2019 à 05:16, LEGEND80 a dit :

@Athlonazu385 I'm referring to this ^

 

What you're saying just doesn't make sense in the context of the HD sdaemon provided there. I think we're talking about two different things.... You stated Raw Thrills supports 2 resolutions...but then I have to set to a 3rd resolution?? in my display properties? and then that'll allow the launcher? to start without patches? What patches? Which launcher - there's two (FNFSC_LAUNCHER_v5 & MohkerzLoaderz.exe) .

 

Forgetting the resolution stuff, the FNFSC launcher works fine, but Mohkerz crashes before gameplay no matter what FYI.

 

I'm just trying to figure out how to set the resolution (specifically -res19) using the patched sdaemon above, on the FNFSC launcher (to have proper controls), with the switches below:

 

From README:

 

The following resolutions can be obtained by using command line arguments.
There is a problem, please ignore.
Thanks to MOHKERS

 

No arguments = 1366x768
-res5760 = 3840x2160
-res4800 = 3440x1440
-res19   = 1920x1080
-res16   = 1600x900
-res10   = 3200x1800
-res8    = 2560x1440
-res6    = 2560x1080
-res5    = 1280x960

Développer  

Ohh i forgot about the -res switches they should work fine. Now i know what you mean now well sorry about that i was just giving some ideas to some people. It's not like its going to hurt just trying it out anyways. Now i look bad :( I tried to help but i know mohkerz got everything under control so far! The resolution i set mine to was 1600x900 which worked fine using the FNFSC Launcher because I've tried the original resolution but the only problem is the game looks too big also it also doesn't help when your running dual monitors like my setup is using so again sorry for most of the stuff that made no sense!

[lokofer]

x360ce DOES not work :( for this game :(

[Mohkerz]

To use on multi monitor setup with launcher, set your désires first monitor res in dxwnd.dxw file and then close and make it read only in Windows paramètres. Then run launcher. 

[Mohkerz]

  Le 14/03/2019 à 14:35, lokofer a dit :

x360ce DOES not work :( for this game :(

Développer  

 I tried with og xbox controller, 360 controller, ps3 pad through betterds3 and even keyboard with a ahk remap or x360kb..... 

Modifié le 14 mars 2019 par Mohkerz

[lokofer]

could you upload your ahk for x360kb please ?

[ducon2016]

  Le 14/03/2019 à 14:35, lokofer a dit :

x360ce DOES not work :( for this game :(

Développer  

 

It works. Put the 32 bit xinput9_1_0.dll in the same folder as MohkerzLoaderz.exe

[Mohkerz]

Yeah x360kb works without any ahk... Thanks again ducon for that tool ! 

Modifié le 14 mars 2019 par Mohkerz

[lokofer]

oh you were right :D i didn't know what i was doing wrong sorry for the inconvinience is there a method to save your improvements in your car ?

[68hc11]

Anything that I can do to help with the progress of Analog steering wheel guys playing in Arcade cabinets?

[camranbant]

Some of the graphics are broken using MohkerzLoader.exe, but work fine using FNFSC_LAUNCHER_v5.exe

Infact the whole game works fine using FNFSC_LAUNCHER_v5.exe, how would I use the -res launch parameters this way? I'd like to play in 1080p.

[a4apples93]

  Le 14/03/2019 à 16:33, ducon2016 a dit :

 

It works. Put the 32 bit xinput9_1_0.dll in the same folder as MohkerzLoaderz.exe

Développer  

thanks... after 32 bit it works

[LEGEND80]

  Le 14/03/2019 à 18:43, camranbant a dit :

Some of the graphics are broken using MohkerzLoader.exe, but work fine using FNFSC_LAUNCHER_v5.exe

Infact the whole game works fine using FNFSC_LAUNCHER_v5.exe, how would I use the -res launch parameters this way? I'd like to play in 1080p.

Développer  

+1 Looking to do the same thing!