chiragj81 Posté(e) le 29 mars 2020 Partager Posté(e) le 29 mars 2020 5 hours ago, petje said: A analogue input steering wheel on a digital keyboard ? So not a bit to steer, no, full left right You try, enjoy !  what we can type in wheel axis option on TP controller setup? thanks Lien vers le commentaire Partager sur d’autres sites More sharing options...
ZX3000GT1 Posté(e) le 30 mars 2020 Partager Posté(e) le 30 mars 2020 (modifié) 16 hours ago, chiragj81 said: what we can type in wheel axis option on TP controller setup? thanks Use VJoy + UCR for DirectInput support Use VJoy + UCR + ScpVbus for XInput support  VJoy http://vjoystick.sourceforge.net/site/ UCR https://www.autohotkey.com/boards/viewtopic.php?t=12249 ScpVbus http://vjoystick.sourceforge.net/site/index.php/vxbox  Those are controller emulators for keyboard Modifié le 30 mars 2020 par ZX3000GT1 1 Lien vers le commentaire Partager sur d’autres sites More sharing options...
chiragj81 Posté(e) le 30 mars 2020 Partager Posté(e) le 30 mars 2020 (modifié) 2 hours ago, ZX3000GT1 said: Those are controller emulators for keyboard thank you Modifié le 30 mars 2020 par chiragj81 Lien vers le commentaire Partager sur d’autres sites More sharing options...
OgGeek2016 Posté(e) le 31 mars 2020 Partager Posté(e) le 31 mars 2020 Is there anyway to put Fighting Climax in Full HD 1920x1080? Lien vers le commentaire Partager sur d’autres sites More sharing options...
Max Panda Posté(e) le 31 mars 2020 Partager Posté(e) le 31 mars 2020 Question regarding idMacX Tools & SegaTools / MiniME as I'm not familiar with these yet - will either/both these tools allow you to emulate an IC Card and save progress for games using Aime and/or Nessica ?  I'm using Asphyxia to save progress/scores for some Bemani HDD games & was wondering if there is a way to get similar functionality for games such as Theatrhythm FF ASC, Groove Coaster, Project Diva, etc. Lien vers le commentaire Partager sur d’autres sites More sharing options...
Invité petje Posté(e) le 31 mars 2020 Partager Posté(e) le 31 mars 2020 2 hours ago, OgGeek2016 said: Is there anyway to put Fighting Climax in Full HD 1920x1080? You can try with GameLoader All RH http://www.mediafire.com/file/0wxygszuzpyv8rq/1_-_Fighting_Climax_Fake_FHD_UHD.rar Lien vers le commentaire Partager sur d’autres sites More sharing options...
OgGeek2016 Posté(e) le 31 mars 2020 Partager Posté(e) le 31 mars 2020 8 hours ago, petje said: You can try with GameLoader All RH http://www.mediafire.com/file/0wxygszuzpyv8rq/1_-_Fighting_Climax_Fake_FHD_UHD.rar Thanks so much!! Lien vers le commentaire Partager sur d’autres sites More sharing options...
krs73 Posté(e) le 1 avril 2020 Partager Posté(e) le 1 avril 2020 Hello, im using JConfig to launch Battle Gear 4 Tuned. I use the Battle Gear 4 JConfig Version, that was spread in the Racing Pack File. I can launch Battle Gear 4 and could also map the steering wheel (G27), but the steering feels very off, more like digital left and right instead of analog steering, the same goes for accel and brake axxis. is tried the different settings, but none really worked. any help? otherwise would be a perfect launcher for this games, since sound works and tachometer works as well. best regards and thanks krs73 Lien vers le commentaire Partager sur d’autres sites More sharing options...
Invité pixels Posté(e) le 2 avril 2020 Partager Posté(e) le 2 avril 2020 Anyone know how long until we see Winning Eleven 2012   Lien vers le commentaire Partager sur d’autres sites More sharing options...
SuperMagoAlex Posté(e) le 2 avril 2020 Partager Posté(e) le 2 avril 2020 1 hour ago, pixels said: Anyone know how long until we see Winning Eleven 2012    Im waiting WE too... Lien vers le commentaire Partager sur d’autres sites More sharing options...
krizalid00 Posté(e) le 6 avril 2020 Partager Posté(e) le 6 avril 2020 i just migrated from w7 to 64 bit w10, and i have had problems with the launch of the games, do jconfig have problems with w10? Lien vers le commentaire Partager sur d’autres sites More sharing options...
krizalid00 Posté(e) le 7 avril 2020 Partager Posté(e) le 7 avril 2020 operation ghost works well jconfig with windows 7? Lien vers le commentaire Partager sur d’autres sites More sharing options...
antonio2018 Posté(e) le 7 avril 2020 Partager Posté(e) le 7 avril 2020 15 minutes ago, krizalid00 said: operação fantasma funciona bem jconfig com o windows 7? YES Lien vers le commentaire Partager sur d’autres sites More sharing options...
krizalid00 Posté(e) le 7 avril 2020 Partager Posté(e) le 7 avril 2020 hace 5 minutos, antonio2018 dijo: SI it does not let me play with the xbox 360 control. it does not recognize the key assignment and it is handled with the mouse  Lien vers le commentaire Partager sur d’autres sites More sharing options...
krizalid00 Posté(e) le 9 avril 2020 Partager Posté(e) le 9 avril 2020 En 7/4/2020 a las 11:02, krizalid00 dijo: it does not let me play with the xbox 360 control. it does not recognize the key assignment and it is handled with the mouse  I managed to solve my problem was the configuration of the jvs, are you planning to get the jconfig for rambo or for house of the dead 4? thanks Lien vers le commentaire Partager sur d’autres sites More sharing options...
northvibe Posté(e) le 11 avril 2020 Partager Posté(e) le 11 avril 2020 Trying to get KO Drive to run in jconfig. I have the game extracted, loaded the patches in. When the game loads, it scrolls to 97/100 then closes the window. Any tips? Lien vers le commentaire Partager sur d’autres sites More sharing options...
cyrax3 Posté(e) le 13 avril 2020 Partager Posté(e) le 13 avril 2020 does anyone have the link to download winning eleven? I just found out it's a spicetools-supported title. I find no tutorials and no news anywhere. Lien vers le commentaire Partager sur d’autres sites More sharing options...
SuperMagoAlex Posté(e) le 16 avril 2020 Partager Posté(e) le 16 avril 2020 On 13/4/2020 at 5:21 PM, cyrax3 said: does anyone have the link to download winning eleven? I just found out it's a spicetools-supported title. I find no tutorials and no news anywhere.  We are all waiting a public dump  Lien vers le commentaire Partager sur d’autres sites More sharing options...
gti1983 Posté(e) le 17 avril 2020 Partager Posté(e) le 17 avril 2020 Does anyone connect to network play GTI CLUB 3 with jconfig, isn´t avaible the network? 1 Lien vers le commentaire Partager sur d’autres sites More sharing options...
Lord Afro Posté(e) le 17 avril 2020 Partager Posté(e) le 17 avril 2020 Hello, I am having trouble launching Tetris Grand Master 3. Whenever I press on the "game.exe" file, it launches a black screen and just disappeared. I even remove the "opengl32,dll" and download the right jconfig. So please help me, thanks. Lien vers le commentaire Partager sur d’autres sites More sharing options...
Invité student123 Posté(e) le 19 avril 2020 Partager Posté(e) le 19 avril 2020 Hey guys, any tricks to unlock all costumes for Ultra Street Fighter 4 1.05? Is there an unlocker yet? Thanks! Lien vers le commentaire Partager sur d’autres sites More sharing options...
Melchor99 Posté(e) le 20 avril 2020 Partager Posté(e) le 20 avril 2020 En ‎11‎/‎04‎/‎2020 a las 22:14, northvibe dijo: Trying to get KO Drive to run in jconfig. I have the game extracted, loaded the patches in. When the game loads, it scrolls to 97/100 then closes the window. Any tips? Same issue, I have tested all different options available, Directx3D9 Wrapped checked and not , High Resolution, Windowed mode, different configurations and resolution patches (1080p,SD,2k), but always games crashes in initilializing window at 97/100. (Windows 10 1903 version) Similar issue happens in GRID, after applying jconfig patch, game crashes after first intro, tested all different available options in jconfig menu. I have tested same GRID game with teknoparrot and it Works succesfully but I want to make it work with jconfig because I have no gamepad and jconfig mapping for keyboard is great  1 Lien vers le commentaire Partager sur d’autres sites More sharing options...
dronnn Posté(e) le 21 avril 2020 Partager Posté(e) le 21 avril 2020 (modifié) del Modifié le 21 avril 2020 par dronnn Lien vers le commentaire Partager sur d’autres sites More sharing options...
Trymado Posté(e) le 21 avril 2020 Partager Posté(e) le 21 avril 2020 (modifié) msg à supprimer Modifié le 21 avril 2020 par Trymado Lien vers le commentaire Partager sur d’autres sites More sharing options...
Doivid Posté(e) le 21 avril 2020 Partager Posté(e) le 21 avril 2020 (modifié) On 20/04/2020 at 8:50 PM, Melchor99 said: Same issue, I have tested all different options available, Directx3D9 Wrapped checked and not , High Resolution, Windowed mode, different configurations and resolution patches (1080p,SD,2k), but always games crashes in initilializing window at 97/100. (Windows 10 1903 version) It does the same thing when I try to run it in TP, looks like it's going to load, then gets to 97/100 and crashes no matter what one of those I choose too.  Would be neat if there's a fix as I've left it alone for now. Modifié le 21 avril 2020 par Doivid Lien vers le commentaire Partager sur d’autres sites More sharing options...
lehcenbrach Posté(e) le 23 avril 2020 Partager Posté(e) le 23 avril 2020 Le 31/01/2020 à 21:14, spiderzsoft a dit : VirtuaTennis4 Jconfig (2020-01-31)     DOWNLOAD     Special Thanks Goes To... FlyBIT - Jconfig  developerSource: 1cc   For Further Information Check 1st page 1st Post #1  1 Lien vers le commentaire Partager sur d’autres sites More sharing options...
Redemption Posté(e) le 24 avril 2020 Partager Posté(e) le 24 avril 2020 On 3/30/2020 at 12:04 AM, chiragj81 said: hello everyone i want to know how to emulate steering wheel with keyboard for arcade racing games? thank you  On 4/20/2020 at 10:50 PM, Melchor99 said: Same issue, I have tested all different options available, Directx3D9 Wrapped checked and not , High Resolution, Windowed mode, different configurations and resolution patches (1080p,SD,2k), but always games crashes in initilializing window at 97/100. (Windows 10 1903 version) Similar issue happens in GRID, after applying jconfig patch, game crashes after first intro, tested all different available options in jconfig menu. I have tested same GRID game with teknoparrot and it Works succesfully but I want to make it work with jconfig because I have no gamepad and jconfig mapping for keyboard is great  Teknoparrot has just made it really easy to use keyboard and it works fantastic!  New update today made it fully work, I've been having a blast Lien vers le commentaire Partager sur d’autres sites More sharing options...
Melchor99 Posté(e) le 24 avril 2020 Partager Posté(e) le 24 avril 2020 (modifié) hace 12 horas, Redemption dijo:  Teknoparrot has just made it really easy to use keyboard and it works fantastic!  New update today made it fully work, I've been having a blast Thanks for your reply Is it a new version? I have checked TP webpage and available version is TP_1.0.0.140 which is the last one I tested with control issues using keyboard :( EDIT: After investigating a bit, updated TP UI and Openloader to last version. This last version allows to configure keyboard as steering Wheel, GRID works like a charm! thanks a lot EDIT: No luck with KO Drive, using jconfig patch crashes at initializiting window at 97/100, in TP last versión it stucks at 0/100  Modifié le 24 avril 2020 par Melchor99 Lien vers le commentaire Partager sur d’autres sites More sharing options...
Redemption Posté(e) le 25 avril 2020 Partager Posté(e) le 25 avril 2020 8 hours ago, Melchor99 said: Thanks for your reply Is it a new version? I have checked TP webpage and available version is TP_1.0.0.140 which is the last one I tested with control issues using keyboard :( EDIT: After investigating a bit, updated TP UI and Openloader to last version. This last version allows to configure keyboard as steering Wheel, GRID works like a charm! thanks a lot EDIT: No luck with KO Drive, using jconfig patch crashes at initializiting window at 97/100, in TP last versión it stucks at 0/100   I just ran KO Drive with TP and it worked  try a fresh dump? Lien vers le commentaire Partager sur d’autres sites More sharing options...
Keroro Posté(e) le 25 avril 2020 Partager Posté(e) le 25 avril 2020 (modifié) Hello team,  Im trying to play Dead or Alive 5 Ultimate in 1080p via Jconfig and I cant do it. any fixed .exe for 1080p? or any file to edit from my side? I can achieve 1080p on Teknoparrot, but as a lot of people I prefer Jconfig over Teknoparrot.  EDIT: WOW! This works for me really well: http://www.mediafire.com/file/fik8xt7sxthtge2/3_-_Dead_or_Alive_5_UPDATE_2_FHD_UHD.rar/file Modifié le 25 avril 2020 par Keroro 1 Lien vers le commentaire Partager sur d’autres sites More sharing options...
snax087 Posté(e) le 25 avril 2020 Partager Posté(e) le 25 avril 2020 Has anyone had an issue with Button 3 not working in KOF98 and 2002? It works fine in street fighter 4 ultimate for both players but neither player 1 or 2's Button 3 works. It maps in JConfig fine. I'm using an IPAC 2 and im using DINPUT option in jconfig. I just updated it by downloading the latest idmacx package in the first post but no luck. Also tried multiple different keys. Lien vers le commentaire Partager sur d’autres sites More sharing options...
snax087 Posté(e) le 25 avril 2020 Partager Posté(e) le 25 avril 2020 24 minutes ago, snax087 said: Has anyone had an issue with Button 3 not working in KOF98 and 2002? It works fine in street fighter 4 ultimate for both players but neither player 1 or 2's Button 3 works. It maps in JConfig fine. I'm using an IPAC 2 and im using DINPUT option in jconfig. I just updated it by downloading the latest idmacx package in the first post but no luck. Also tried multiple different keys. I also noticed that i can map my mayflash 300 joystick in jconfig if i select xinput, but when i load the game up, it still only takes my arcade buttons hooked into the ipac or the corresponding keyboard key and completely ignores the joystick. Ive tried to delete all the buttons resetting the key value to 0 and only assigning buttons from my joystick but it still only uses my keyboard keys i originally mapped. Where does jconfig store it's button input info? I'm trying to reset it to default since the configuration seems stuck Lien vers le commentaire Partager sur d’autres sites More sharing options...
Keroro Posté(e) le 25 avril 2020 Partager Posté(e) le 25 avril 2020 (modifié) hace 36 minutos, snax087 dijo: Has anyone had an issue with Button 3 not working in KOF98 and 2002? It works fine in street fighter 4 ultimate for both players but neither player 1 or 2's Button 3 works. It maps in JConfig fine. I'm using an IPAC 2 and im using DINPUT option in jconfig. I just updated it by downloading the latest idmacx package in the first post but no luck. Also tried multiple different keys.  Neo Geo only has 4 buttons, and in the mapping it should be 1,2,4,5 working, 3,6 not. I do it this little mockup for better explain.  Modifié le 25 avril 2020 par Keroro Lien vers le commentaire Partager sur d’autres sites More sharing options...
snax087 Posté(e) le 25 avril 2020 Partager Posté(e) le 25 avril 2020 9 minutes ago, Keroro said:  Neo Geo only has 4 buttons, and in the mapping it should be 1,2,4,5 working, 3,6 not. I do it this little mockup for better explain.  yea i know it uses the 4 button layout but no matter what button i map button 3 to, the game doesnt recognize it at all. 1,2, and 4 work fine regardless of what key they're mapped to Lien vers le commentaire Partager sur d’autres sites More sharing options...
Keroro Posté(e) le 25 avril 2020 Partager Posté(e) le 25 avril 2020 hace 1 minuto, snax087 dijo: yea i know it uses the 4 button layout but no matter what button i map button 3 to, the game doesnt recognize it at all. 1,2, and 4 work fine regardless of what key they're mapped to  mmm... ok, in this case I think you need a cleaner dump or maybe other jconfig version because its not normal at all. Lien vers le commentaire Partager sur d’autres sites More sharing options...
snax087 Posté(e) le 25 avril 2020 Partager Posté(e) le 25 avril 2020 Just now, Keroro said:  mmm... ok, in this case I think you need a cleaner dump or maybe other jconfig version because its not normal at all. i have the latest version of jconfig but it's strange that it does it in both kof 98 and 2002, not just one of them. I downloaded these both from the taito type x thread so i assume they're good Lien vers le commentaire Partager sur d’autres sites More sharing options...
Keroro Posté(e) le 25 avril 2020 Partager Posté(e) le 25 avril 2020 hace 1 minuto, snax087 dijo: i have the latest version of jconfig but it's strange that it does it in both kof 98 and 2002, not just one of them. I downloaded these both from the taito type x thread so i assume they're good  And what happens If you mapp a Keyboard key, disconnecting the IPAC2 ? Lien vers le commentaire Partager sur d’autres sites More sharing options...
Messages recommandés
Veuillez vous connecter pour commenter
Vous pourrez laisser un commentaire après vous êtes connecté.
Connectez-vous maintenant