idMacX + J/Rconfig + JVSemu + SpiceTools + BemaniTools + SegaTools + etc.

[Invité R.R.Z.]

On 12/30/2021 at 1:38 AM, sk8t said:

 

Can’t check currently but maybe u know if 1080p/4k applied for sonic d

by shortcut on the target file?

Thanks 

Modifié le 3 janvier 2022 par R.R.Z.

[Invité Onkel]

..-. ..- -.-. -.- / -.-- --- ..- / .- -. -.. / -.-- --- ..- .-. / -- --- .- -. .. -. --. / -... .. - -.-. .... / -.-.-- -.-.--

Modifié le 3 janvier 2022 par Onkel

[Rex2573]

1 ora fa, soso92 ha scritto:

 

I tested the 2 it's not bad on the other hand what I don't like is that the sharpness of the game and the graphics are of lower quality than in vertical full screen mode and this must be due to the resizing from the window game
Personally I prefer to keep an original format of the game

 

You are right..graphics are   of lower quality

Modifié le 3 janvier 2022 par Rex2573

[ANonnyMouse]

1 hour ago, Onkel said:

..-. ..- -.-. -.- / -.-- --- ..- / .- -. -.. / -.-- --- ..- .-. / -- --- .- -. .. -. --. / -... .. - -.-. .... / -.-.-- -.-.--

 

Hahahaha.

[GeneralNim]

any tips how to edit dgvoodoo.conf so it will fit to tv 1366X768

[joe555]

6 minutes ago, GeneralNim said:

any tips how to edit dgvoodoo.conf so it will fit to tv 1366X768

Look at the top tabs the furthest right one set res in there click apply but do thru exe easier

Modifié le 3 janvier 2022 par joe555

[GeneralNim]

you mean copy the exe file to folder open it and change the resolution  ?

 

 

[joe555]

19 minutes ago, GeneralNim said:

you mean copy the exe file to folder open it and change the resolution  ?

 

 

Put dgvodoo exe in your game folder open and set res in there then click apply you need all the files with DG voodoo in game folder I think there's 6

Modifié le 3 janvier 2022 par joe555

[Invité R.R.Z.]

2 hours ago, Rex2573 said:

You are right..graphics are   of lower quality

It looks bad horizontally/full screen on your screen my friend?

originally that game was in hd res(probably 720P)

so it should look ok even on a 4k screen 

 

[Rex2573]

49 minuti fa, R.R.Z. ha scritto:

It looks bad horizontally/full screen on your screen my friend?

originally that game was in hd res(probably 720P)

so it should look ok even on a 4k screen 

 

But i don t think is possible to see it in horizontally full screen my friend or i wrong?

Modifié le 3 janvier 2022 par Rex2573

[Invité R.R.Z.]

2 minutes ago, Rex2573 said:

But i don t think is possible to see it in horizontally full screen my friend

Why not? use jc+game

run it as is without any additional files and you should see it full screen(horizontally)my friend 

Modifié le 3 janvier 2022 par R.R.Z.

[Rex2573]

9 minuti fa, R.R.Z. ha scritto:

Why not? use jc+game

run it as is without any additional files and you should see it full screen(horizontally)my friend 

Bit without additional files it appear in vertical mode and with black boards my friend

[Invité tommiegunz]

1 hour ago, GeneralNim said:

any tips how to edit dgvoodoo.conf so it will fit to tv 1366X768

i have it running fine using ArcCadView 1366x768 try it and it has a bezel

[Invité R.R.Z.]

59 minutes ago, Rex2573 said:

Bit without additional files it appear in vertical mode and with black boards my friend

Try to unzip the game again my friend 

start from the beginning and it should work full screen the same way alpine racer does with jc

Modifié le 3 janvier 2022 par R.R.Z.

[7zxkv]

So this is the teased SEGA official amdaemon emulator, bundled in StarHorse 4.
Notice this tool is not a so called killer app, tried launching Wacca with this and it just crashes on boot. 
Have fun messing around with it. Carltrek.

 

source

[akiroz]

Can anyone give me a brief intro to how andaemon communicates with the main game without a code dive?

[akiroz]

Electrolysis Server (e10s) version 1.6 is out.

Now supporting Initial D Zero 1 & 2 (up to 2.1x) along with chunithm, maimai DX, and ongeki.

Releases in the usual place

Modifié le 8 janvier 2022 par akiroz

[soso92]

Fake or Real.... 

 

Yes you right no calibrated But it seems largely playable. 

Great news if it will be public soon I can't wait to play this game

Modifié le 8 janvier 2022 par 7zxkv

[CiTrON]

4 hours ago, soso92 said:

Fake or Real.... 

real! 

[Invité Onkel]

56 minutes ago, CiTrON said:

real! 

Empirical evidence, proof ?

Modifié le 8 janvier 2022 par Onkel

[CiTrON]

 

DOWNLOAD

 

 

House of The Dead Scarlet Dawn Emulated!!!

 

Special Thanks,
[ A special friend!!! ]
[ williecoyote ] - For making the jc logo and tests with lightguns
[ Pandemonium ] - For doing all the tests 

 

NOTE: Change the resolution to 1920x1080

 

 

Special thanks to FlyBit (JConfig developer)

Modifié le 8 janvier 2022 par CiTrON

[Invité tommiegunz]

1 hour ago, CiTrON said:

 

DOWNLOAD

 

 

House of The Dead Scarlet Dawn Emulated!!!

 

Special Thanks,
[ A special friend!!! ]
[ williecoyote ] - For making the jc logo and tests with lightguns
[ Pandemonium ] - For doing all the tests 

 

NOTE: Change the resolution to 1920x1080

 

 

Special thanks to FlyBit (JConfig developer)

Can someone should how to properly set this up to shoot I can add coins or start but can’t move my pointer or shoot 

* Edit 

I switched modes and can move now but still can’t shoot so i know I’m overlooking something here 

Modifié le 8 janvier 2022 par tommiegunz

[gStAvEn]

when running amdaemon.exe I get error: (running Win7)

 

"The procedure entry point DnsQueryEx could not be located in the

dynamic link library dnsapi.dll"

[Invité tommiegunz]

1 minute ago, gStAvEn said:

when running amdaemon.exe I get error: (running Win7)

 

"The procedure entry point DnsQueryEx could not be located in the

dynamic link library dnsapi.dll"

Their is a win 7 fix for this game on the scarlet dawn thread look it up buddy 

[soso92]

il y a une heure, CiTrON a dit :

TÉLÉCHARGER

House of The Dead Scarlet Dawn émulé !!!

Remerciements spéciaux,
[ Un ami spécial !!! ]
[ williecoyote ] - Pour faire le logo jc et les tests avec des lightguns
[ Pandemonium ] - Pour faire tous les tests 

 

REMARQUE : Changez la résolution en 1920x1080

Remerciements particuliers à FlyBit (développeur JConfig)

Thank you very much foir this for all the team Jconfig 

The game works perfectly well and it really makes me happy to be able to play it now serious to you.

- the Esc key that I configured in Jconfig to quit the game does not work.
- I did not find in the test mode if we can put it in Free play ???
- I tried to recalibrate in the test mode but I did not succeed
before the calibration phase the viewfinder can be seen clearly and as soon as the calibration begins the viewfinder no longer appears

[EmuAl]

10 minutes ago, soso92 said:

- I tried to recalibrate in the test mode but I did not succeed

before the calibration phase the viewfinder can be seen clearly and as soon as the calibration begins the viewfinder no longer appears

 

to calibrate i moved icon over each symbol on screen then press start to get to correct icon then press trigger
but even after calibration the aim is way off ?

[sargetyu]

is the aim still off with the 1920x1080 resolution?

[erdoboy43]

12 minutes ago, EmuAl said:

 

to calibrate i moved icon over each symbol on screen then press start to get to correct icon then press trigger
but even after calibration the aim is way off ?

Yeah calibration way off for me to unfortunately

[erdoboy43]

1 minute ago, sargetyu said:

is the aim still off with the 1920x1080 resolution?

already running at 1080p for me (1080p tv) and aim is off

[EmuAl]

yes 1920x1080 here and aim is really poor if supposed to be aiming at on screen crosshair ?

[Invité tommiegunz]

i'm pretty sure they know calab is off at the moment they might just wanted to get something released to us asap so we could try the game ourselves until they fix the issue 

[Guisado88]

Not work out of the game

 

Cross not perfect

 

Try with aimtrak

 

 

Modifié le 8 janvier 2022 par Guisado88

[DarkVoid666]

vor 4 Minuten schrieb tommiegunz:

i'm pretty sure they know calab is off at the moment they might just wanted to get something released to us asap so we could try the game ourselves until they fix the issue 

I'm playing with a Sinden Gun and it is 100% calibrated for me after calibration in test mode.
I just have that muffled sound, i'm using tv speakers and NVIDIA HDMI AUDIO.
Anyone knows a fix for this?

[soso92]

il y a 40 minutes, DarkVoid666 a dit :

I'm playing with a Sinden Gun and it is 100% calibrated for me after calibration in test mode.
I just have that muffled sound, i'm using tv speakers and NVIDIA HDMI AUDIO.
Anyone knows a fix for this?

Can you explain in detail how you do to calibrate please

[DarkVoid666]

vor 16 Minuten schrieb soso92:

Can you explain in detail how you do to calibrate please

I have assigned the buttons in jconfig for Test-F1, Service-F2,, P1 Start-1
In-Game, hit F1 to get into Test Mode, then with F2 go to Controller Adjustment and hit F1.
At the Adjustment screen, you can select Top, Left etc with the 1 key.
Select each one and point+shoot your gun at each selected target, after you've "shot" at all targets, you can go to check and see if it is calibrated correct.

NOTE; You won't see a crosshair when calibrating each target, but when you go to check, a crosshair appears and you can check if it matches.
Worked perfectly for me with a SInden Gun.

Modifié le 8 janvier 2022 par DarkVoid666

[Rex2573]

not works perfect with xboxpad...the crosshair does not move in the screen...i will wait for a better adjustment

[eljose]

what must you do to work it with the MOUSE is already programmed to be played with mouse (movement and shots)