idMacX + J/Rconfig + JVSemu + SpiceTools + BemaniTools + SegaTools + etc.

[REVENGEMANX]

@Boomslangnz hi anyway to use swdc with legit Sega  USB io 4 ? Thx

[xepher]

Hello, is there any manual or instructions of how to use Segatools? Has anyone try it on FGO? thank you.

 

[7zxkv]

## Bemani tools 5.35
* Jubeat: Add jbio-p4io
* Nostalgia: Add nostio-panb
* Misc: Refactor aciodrv to support multiple devices using the same port (with aciomgr)
* Misc: Fix d3d9ex windowed hook not behaving correctly (size/framed)
* Misc: Fix docs not being included with release
* Various bugfixes

 

[arandomemail]

Has anyone gotten SpiceTools to work with beatmania IIDX 28 or does it only work up to 27? I keep getting an e-amusement error when trying both e-amusement emulation and asphyxia core.

Modifié le 10 juillet 2021 par arandomemail

[ZX3000GT1]

Need help. I'm trying to play Beatmania IIDX 10.

I've downloaded BemaniTools (does SpiceTools work with legacy PC IIDX games?) and set up the controls from config.
But I got an error - https://pastebin.com/Q1dfCm66

This is the config contents - https://pastebin.com/EPL6k3TP

 

EDIT : Found this info

Quote

If you don't run this on old hardware that uses an analog version of a Realtek 
integrated sound chip, you have to replace RtEffect.dll with a stubbed/patched
version (RtEffect_patched.dll). Otherwise, the game might crash instantly when
trying to start it.

Now where would I find this RtEffect_patched.dll?

Modifié le 13 juillet 2021 par ZX3000GT1

[erdoboy43]

Has anyone been able to get Fighting Ex Layer version 1.31 (taken from Virusmans website) working with Jconfig please?. I realise the Jconfig patch was meant for the earlier version of the game, but I just wandered if any setting could be changed to make it work.

 

Thanks in advance for any help.

[Enkak]

Hi everyone. I'm using Jconfig (v1.6) to play Wangan Midnight Maximum Tune 5. All is good until I get to episode 11 in story mode. On that one the game always crashes to desktop on the middle of doing the first "left red curve sign" in the episode. Tried it with the English translation patch and without to check if it was related and got always the crash in the same place. Does this happens to anyone? And if yes, do you have a possible solution?

PS: Happens also in episode 13, similar/same spot at first "hard red curve".

Thanks in advance!

Modifié le 16 juillet 2021 par Enkak
added jconfig version used

[Gtguy]

On 6/20/2021 at 9:39 AM, Coding said:

I STUDYED THE TEKNOPARROT SOURCE CODE AND MADE A PROGRAM TO USE THE SUPERBIKE2 KEYPADPIN IN CONJUNCTION WITH JCONFIG

https://www.mediafire.com/file/itovxyqhzyq2w4k/KEYPADPIN.rar/file

ONLY RUN SDAEMON.EXE FIRST AND THEN KEYPADPIN.EXE

 

 

What is the infinity or pound key you need on keyboard after you enter the pin?

 

 

Modifié le 17 juillet 2021 par Gtguy

[Gtguy]

 /

Modifié le 17 juillet 2021 par Gtguy

[mhzxz]

On 2/16/2021 at 7:16 AM, petje said:

Minime_v016_hotfix.rar for ID Zero

https://gofile.io/d/zsZUXp

File no longer available,is it possible to have another upload plz?thx!

Modifié le 21 juillet 2021 par mhzxz

[Invité Onkel]

On 7/21/2021 at 5:54 PM, mhzxz said:

File no longer available,is it possible to have another upload plz?thx!

 

 

[mhzxz]

15 minutes ago, Onkel said:

 

 

GOD I'm so stupid.Google guide me here but I didn't realize the soltion is at the top.....Thanks,I'll try the laster Mineme.

[mhzxz]

On 7/23/2021 at 1:03 AM, Onkel said:

 

Sorry if I'm being annoying,but after using the latest version of minime I run into these problems, I think host address 0.0.0.0 means there's definitely something I'm doing wrong.....

D:\TeknoParrot\SegaTools\minime>DS: Open device
start.bat
DS: Get geometry
DS: Setup IOCTL
SetupAPI: Interface {e9a26688-...} -> Device node $gpio
GPIO: Open device
GPIO: Describe GPIO ports
Process state: setup Game Mode
Security: Opened handle
DS: Read sector 00000000
Security: nusec_ioctl_get_nvram_geometry
--- Begin idz_pre_startup ---
Vfs: WARNING: OPTION path not specified in INI file
---  End  idz_pre_startup ---
Security: nusec_ioctl_get_nearfull
Inid_Crypt::Inid_Crypt()Inid_Crypt::Inid_Crypt()killed amdaemon!
killed serverbox!
  app:switchboard HOST_EXT: 127.0.0.1 (Service host name sent to clients) +0ms
  app:switchboard HOST_INT: 0.0.0.0 (Bind address) +2ms
  app:switchboard Using default host names, change them from the .env file if necessary. +1ms
Startup OK
events.js:352
      throw er; // Unhandled 'error' event
      ^

Error: listen EACCES: permission denied 0.0.0.0:80
    at Server.setupListenHandle [as _listen2] (net.js:1303:21)
    at listenInCluster (net.js:1368:12)
    at doListen (net.js:1505:7)
    at processTicksAndRejections (internal/process/task_queues.js:83:21)
Emitted 'error' event on Server instance at:
    at emitErrorNT (net.js:1347:8)
    at processTicksAndRejections (internal/process/task_queues.js:82:21) {
  code: 'EACCES',
  errno: -4092,
  syscall: 'listen',
  address: '0.0.0.0',
  port: 80
}

 

[Invité Onkel]

2 hours ago, mhzxz said:

Sorry if I'm being annoying,but after using the latest version of minime I run into these problems, I think host address 0.0.0.0 means there's definitely something I'm doing wrong.....

DM me your Segatools.ini and a screen dump of your network settings
I recommend to set a static IP in windows network settings

[Invité R.R.Z.]

On 7/13/2021 at 9:14 PM, erdoboy43 said:

Has anyone been able to get Fighting Ex Layer version 1.31 (taken from Virusmans website) working with Jconfig please?. I realise the Jconfig patch was meant for the earlier version of the game, but I just wandered if any setting could be changed to make it work.

 

Thanks in advance for any help.

Tried i get io error also haven’t saw any photos or videos of this version working so I guess there isn’t a loader for it(publicly)

a bummer I wanted to play with the extra 3 characters😕

Modifié le 24 juillet 2021 par R.R.Z.

[drewjbs]

Anyone have links of older versions of spice tools? Would like to try some earlier builds for Road Fighters... the latest spice tools is not seeing my left joystick when trying to map. Will only see Right joystick movement. And that is being picked up as X- (Joystick Right should be X+ I thought?)

Or is there something I am missing or doing wrong...

 

 

 

[juice]

hi ,i dont know if i am asking in the right place ,but i am looking for a version of these games, that work i have downloaded a few diffrent versions. thanks you

 

gaia attack 4 - runs fine then crashes after the demo or  pushing start

gundam zero - i think i need version with jconfig

haunted museum 2 - cant find file hmuseum

[titf650]

il y a 16 minutes, juice a dit :

hi ,i dont know if i am asking in the right place ,but i am looking for a version of these games, that work i have downloaded a few diffrent versions. thanks you

 

gaia attack 4 - runs fine then crashes after the demo or  pushing start

gundam zero - i think i need version with jconfig

haunted museum 2 - cant find file hmuseum

 

TTX :

https://pool389.seedbox.fr/files/index.php/s/bDxxpZTFMLXWiQE/authenticate/showShare

 

pass: Trymado

 

Nesica:

 

https://pool389.seedbox.fr/files/index.php/s/GZpxPmwt8DQ5orG/authenticate/showShare

 

pass Trymado

 

pour la configuration https://jconfig-universe.fandom.com/wiki/Special:AllPages

 

(et non ce n'est pas au bon endroit :))

Modifié le 28 juillet 2021 par titf650

[scooby]

Salut,

Est-ce que quelqu'un a réussi a faire tourner Metal Gear Arcade avec la dernier version de Spicetools sous windows 10 ?

 

English : Does anybody try to run Metal Gear arcade with the lastest version of Spicetools under Windows 10 ?

 

Merci d'avance.

[titf650]

Est ce que quelqu'un arrive a configurer spicetools avec des stick xin mo arcade dual ?  je n'arrive pas à configurer le stick directionnel correctement sur analogique. je n'enregistre que les positions bas et droite. Les positions gauche et haut restent sans effets Je ne comprend pas pourquoi j'ai regardé dans le sujet winning eleven 2012 mais aucune infos. Je ne trouve pas de solution pourtant j'ai fouillé partout. (joytokey n'est pas actif, je configure jconfig pour les autres jeux sans problème particulier)

j'ai oublié de cocher une case  ou d'activer quelque chose ?

 

Edit : c'est "naive" pas" bind" avec un profil JoyToKey lié à l'application spice.exe pour link les directions du stick (la honte ça fait des mois que je cherche)

 

Modifié le 29 juillet 2021 par titf650

[titf650]

Le 27/07/2021 à 02:29, drewjbs a dit :

Anyone have links of older versions of spice tools? Would like to try some earlier builds for Road Fighters... the latest spice tools is not seeing my left joystick when trying to map. Will only see Right joystick movement. And that is being picked up as X- (Joystick Right should be X+ I thought?)

Or is there something I am missing or doing wrong...

 

 

 

Try "Naive" to link left  right and up down direction with jotokey profil

Modifié le 29 juillet 2021 par titf650

[Fluffthatpanda]

epic

 

[Vermillion]

On 5/30/2021 at 9:11 PM, xtremebuga said:

Go in the game menus and make the sequence as in the images ...

 

 

 

 

 

When you get here, move all the buttons on the controller and get back to the game.

I already do that, but the gas and brake still not working

[arandomemail]

There's only a handful of songs available in Taiko no Tatsujin, even though I've tried applying the omnimix patch and/or the patched executable files. Is there anything else I need to do?

[SeiferAlmasy]

i new in this place (not in emulation, since 1999) but i have a simple question...

 

Exist a loader that work with the maximum possible PC Based arcade games? if not, have a link with all loaders disponible to all "dumped" games?

 

Thanks, and don't blame me lol

[gasabbath]

hace 10 horas, SeiferAlmasy dijo:

i new in this place (not in emulation, since 1999) but i have a simple question...

 

Exist a loader that work with the maximum possible PC Based arcade games? if not, have a link with all loaders disponible to all "dumped" games?

 

Thanks, and don't blame me lol

Short anwser no.
For Taito PC based use Jconfig or TeknoParrot (I prefer Jconfig),
For Sega Linux PC based use TeknoParrot,
For Sega Windows PC based use Jconfig or/and TeknoParrot and SegaTools.

For Namco PC based use Jconfig or/and TeknoParrot

For Namco Linux PC based use TeknoParrot

For Konami PC based use spiceTools.

[SeiferAlmasy]

Il y a 16 heures, gasabbath a dit :

Short anwser no.
For Taito PC based use Jconfig or TeknoParrot (I prefer Jconfig),
For Sega Linux PC based use TeknoParrot,
For Sega Windows PC based use Jconfig or/and TeknoParrot and SegaTools.

For Namco PC based use Jconfig or/and TeknoParrot

For Namco Linux PC based use TeknoParrot

For Konami PC based use spiceTools.

 

In other words, except for Konami PC Based, Teknoparrot run all others systems... Cool, Thanks man (i really not want no one for this dance/music/sound/whatever games of konami lol)

[SeiferAlmasy]

il y a 12 minutes, maabus a dit :

@SeiferAlmasy

Konami is not just music dance. There are games like bishi bashi, metal gear, silent hill, and others. 

I think you are thinking of Konami Bemani

 

Yes, i see Konami in arcade i think Konami Bemani... errr... METAL GEAR? arcade? (or is a example? i know konami games, of course lol)

Modifié le 25 août 2021 par SeiferAlmasy

[SeiferAlmasy]

I downloaded Fighting EX Layer and I'm using Virus-M@N's JConfig but it's not working, an error screen appears... can anyone help with this? (It's an error screen, all in Japanese obviously, but besides the characters there are some numbers)

[SeiferAlmasy]

il y a 8 minutes, maabus a dit :

Metal gear arcade.

 

Can you show a screenshot of the error.

 

 

Modifié le 25 août 2021 par SeiferAlmasy

[7zxkv]

Wangan Midnight Maximum Tune 5DX & 5DX+ and Apm3 System Emulator Version 1.0 available on #1 (in jconfig section).

[eljose]

But there is not Jconfig.exe inside the APM 3 emulator :( only the save file for Gonya fighters and the apm.dll

Modifié le 28 août 2021 par eljose

[Invité R.R.Z.]

21 minutes ago, eljose said:

But there is not Jconfig.exe inside the APM 3 emulator :( only the save file for Gonya fighters and the apm.dll

I can’t check currently but
Try to dl again maybe your av deleted it?

 

Modifié le 28 août 2021 par R.R.Z.

[Invité EMULINETRASH619]

hace 1 hora, eljose dijo:

But there is not Jconfig.exe inside the APM 3 emulator :( only the save file for Gonya fighters and the apm.dll

I only downloaded jconfig64 from the official wiki page since it did not come in the file

[Keroro]

- DOA6: Working with all the buttons!

- PUYO PUYO: Everything OK.

- GG STRIVE, works, but something strange happens, the Japanese characters appears or translated o directly broked.

Modifié le 28 août 2021 par Keroro

[xtremebuga]

5 hours ago, Keroro said:

- DOA6: Working with all the buttons!

- PUYO PUYO: Everything OK.

- GG STRIVE, works, but something strange happens, the Japanese characters appears or translated o directly broked.

Where can I download Jconfig for GG Strive?

[Keroro]

hace 6 minutos, xtremebuga dijo:

Where can I download Jconfig for GG Strive?

 

In the first post