[Arcade PC] Daytona 3 (Sega Amusements like Europa-R System)

[Rex2573]

Il 22/12/2017 Alle 21:38, cyrille2hk ha scritto:

Fully downloadable pack.exe available for free from SEGA itself (update but full in reality) for upgrade purpose (crazy isn't it ?)? 

 

Primary Source :

 

http://www.segaarcade.com/news/free-software-upgrade-for-daytona-championship-usa.html

 

or

 

http://cryptic-gaming.net/ne/

 

Fixed version based on all steps below (in French but language can be changed by English inside ...\ShellData\Gamesettings.ini) [Thanks to ginzu]

 

https://mega.nz/#!hg1VFRgQ!BhX58gHyb4ozExhu16Ra4TCU3p8cD6MEvegNFb427QI  => remplacé par "fichier joint au post en bas de page"

 

 

(miroir des fichiers: https://mega.nz/#F!J2gWyDZY!nHRCu1SALwAvmjUSCBEI1w!Mnh1AKDA) [utile pour le jeu principal, les autres fichiers sont trouvables ici même et à jour]

 

Version pré-configurée: mega://enc2?C5WMvzGkBH1DIxw6Ab0A59h692R3ti1hSw7J10KK4nnEtC-Ar5BGZpDPw7DFoemXm_4lgNJ_mwkO_uoKTG_dKw

https://drive.google.com/file/d/1rRKWel8pjKQEOvFZG-Ur-0eCe2U1obvA/view?usp=sharing

 

 

A noter  qu'avec  la version fixed juste compléter avec l'exe patché (voir au bas de ce message pour télécharger et étape 7 ci-dessous)  et vous pourrez jouer avec des périphériques xinput (manette Xbox,...)

 

 

Au cas où vous souhaitez utiliser la primary source.

Résumé de toutes les manips (merci à ducon2016, Bruce & Wallmachine) avec la primary source voir étapes 1 à 8.

 

1. Décompresser le jeu (3.7go) qui est en autoextractible sous format .exe, avec 7zip ou similaire (pour le primary source)

2. Renommer le repertoire Update en Daytona

3. Copier répertoires dans C:\Sega pour que l'arbre ressemble a ca

C:\Sega\assets

C:\Sega\Daytona
C:\Sega\shell

4. Creer C:\Sega\ShellData et C:\Sega\GameData

5. Copier C:\Sega\shell\Deploy\GameData\config.ini dans C:\Sega\GameData

6. Creer ShellData.ini dans C:\Sega\ShellData
[Credit]
Freeplay = 1

[Network]
CabinetID=1
NumCabinets=1

7.Remplacer le Daytona.exe d'origine (mieux le renommer !) dans C:\Sega\Daytona par le fix (Thanks to Bruce & ducon2016, jackchen): ci-joint dans ce post en bas.

8.Lancer le jeu

 

9.Indépendament des séquences 1 à 8, Pour accéder au test mode:

      1.Télécharger les drivers DESKEY (DS2) via le site official http://des.co.uk/support

      2.Puis lancer le shell (une fenêtre s'ouvre avec ERROR! SECURITY 2)

      3. Appuyer sur la touche "T"  puis utiliser "Y" pour vous déplacer et "T" pour entrée dans les menus correspondants

 

- Ancien patch fonctionnel:

Daytona_Patch(XInput working+nocrash).7z
 

- Nouveau Patch + Launcher (source)(source2) :

DaytonaLaunch3.3(patched).rar
 

Variante du précédent patch (fichier ppf identique donc exe patché identique à récupérer précédemment) 
(source) (source2) (source3):

D3LauncherCLv1.4.zip

Attention:

Selon les options de régionalisation de votre Windows, si le launcher indique une erreur ou ne fonctionne pas, modifier les 2 fichiers de configuration : XIRumble.cfg / Deadzone.cfg  en changeant les . (point) en , (virgule) ou inversement.

 

excuse me but this game works on a 32 bit pc?

[darksabre9]

has anyone acquired the DAYTONA CHAMPIONSHIP USA NEW SEASON EDITION update yet?

[FrequencyModulation]

On 5/19/2020 at 9:08 AM, darksabre9 said:

has anyone acquired the DAYTONA CHAMPIONSHIP USA NEW SEASON EDITION update yet?

I'd be curious about this too. You can technically send in an inquiry form to get the update for free from Sega Amusements, but they ask for a cabinet serial number, so that likely won't work.

[zestorm]

Le 22/12/2017 à 21:38, cyrille2hk a dit :

- Nouveau Patch + Launcher (source)(source2) :

DaytonaLaunch3.3(patched).rar

 

Mon antivirus détecte un trojan dans ce fichier. Sympa.........

[Friko]

10 hours ago, zestorm said:

 

Mon antivirus détecte un trojan dans ce fichier. Sympa.........

C'est correcte. Ajoute le dans tes exceptions

[Tremolux]

Salut à tous, j'essaie désespérément d'entrer dans le test mode du jeu pour pouvoir baisser le volume de la musique mais pas moyen...j'ai bien installé les drivers DK2 mais lorsque je lance le shell ça crashe direct, j'ai juste une fenêtre noire qui s'affiche une demi seconde et plus rien ! Une idée ? Merci d'avance.

 

Ci-joint le rapport d'erreur si ça peut aider...

system - 200602.log

Modifié le 2 juin 2020 par Tremolux
Ajout rapport d'erreur

[Tremolux]

Le 22/12/2017 à 21:38, cyrille2hk a dit :

9.Indépendament des séquences 1 à 8, Pour accéder au test mode:

      1.Télécharger les drivers DESKEY (DS2) via le site official http://des.co.uk/support

      2.Puis lancer le shell (une fenêtre s'ouvre avec ERROR! SECURITY 2)

      3. Appuyer sur la touche "T"  puis utiliser "Y" pour vous déplacer et "T" pour entrée dans les menus correspondants

 

Salut à tous, j'essaie désespérément d'entrer dans le test mode du jeu pour pouvoir baisser le volume de la musique mais pas moyen...j'ai bien installé les drivers DK2 mais lorsque je lance le shell ça crashe direct, j'ai juste une fenêtre noire qui s'affiche une demi seconde et plus rien ! Une idée ? Merci d'avance.

 

Ci-joint le rapport d'erreur si ça peut aider...

system - 200602.log

 

Problème résolu ! C'était la sortie audio HDMI qui posait problème, j'ai trouvé la solution ici-même :-) Merci à tous les membres actifs de cette communauté qui font un travail incroyable !

Modifié le 3 juin 2020 par Tremolux
Problème résolu

[Invité Jayinem]

I'm having problem as others with my xinput wheel working. I tried both patches, I edited Shelldata.ini and added GameSettings.ini, but when I hit start nothing happens. 

[Invité Jayinem]

NM fix it with x360ce but it plays a little slow. Maybe my computer not the best. 

[holmes]

I do not know if I am the only one but I have really a hard time driving with my DFGT wheel using TP. Direction is too direct and so it is difficult to precisely place the car. It is really unpleasant, especially when you compare with the control you have with supermoldel on Daytona 2.

So I made another attempt with a standalone set-up as proposed by JoNB3x (no use of TP).

Initially, controls were bad as well. I used then x360ce and was able to tune the sensitivity of the controls to my liking. Now it is really really better.

I do not have FFB so far, and the game does not behave as on TP: you cannot choose the race you will do, which is a bit weird.

So I do not know which is the best route: try to use TP with x360ce  (I have not been sucessfull so far) or try to get FFB and solve the other issue with the standalone set-up.

Any advice or feedback?

Modifié le 2 août 2020 par holmes
Typo

[Geordiedean1974]

Anyone got a working link to this 

[holmes]

il y a 2 minutes, Geordiedean1974 a dit :

Anyone got a working link to this 

JoNB3x's link works (used today):

https://drive.google.com/open?id=1gD-NSxTrxGX0hhtWLtK7pVj9BfQdB-wH

 

[Geordiedean1974]

17 minutes ago, holmes said:

JoNB3x's link works (used today):

https://drive.google.com/open?id=1gD-NSxTrxGX0hhtWLtK7pVj9BfQdB-wH

 

 

Is it patched?

[holmes]

You can use it as standalone following JonB3x's instructions. I do not know if it works with TP.

[Geordiedean1974]

9 hours ago, holmes said:

You can use it as standalone following JonB3x's instructions. I do not know if it works with TP.

 

Not working on my machine gets stuck at the network discovery start then just closes to desktop

[holmes]

For those complaining about the controls, I finally found a solution.

Using x360ce 4 (I was not aware this version existed!), everything works:

- Install x360ce

- map the wheel controls, tune the sensitivity, enable and test FFB to your liking (still in X360ce),

- minimize the app (there is no more generation of a DLL) ; do not close it

- Launch FFBPluginUI, choose DFGT (and not the Xinput Gamepad)

- Launch technoparrot UI and map the buttons to the Xinput gamepad

- Launch Daytona and enjoy!

 

Tested with: x360ce 4.12.8, FFBPlugin 2.1 and Teknoparrot 1.0.0.400

 

For my Logitech Driving Force GT Wheel, I used in x360ce:

- Anti dead zone:0

- Dead zone:0

- Sensitivity:50%

- Force Feedback : Enabled, Periodic Sine, 100%.

- Left motor:100%, 190ms

- Right motor:100%, 50ms

 

In FFBPlugin, strength: 70%

 

In Teknoparrot, Stooz zone disabled

Game settings: xinput enabled (DFGT is a directinput wheel but x360ce emulates an xinput one).

 

This has completely changed for me the game experience. You should try this!

[Geordiedean1974]

Any help on getting this past the network discovery step mine just kicks me back to desktop and wont launch

[holmes]

Do you use Teknoparrot or the Standalone version?

 

The most simple way is to use Teknoparrot.

Go to VirusMan's site.

http://teknoparrot.link.free.fr/

Select Teknoparrot and the Sega PC Based games.

Daytona is there.

Modifié le 3 août 2020 par holmes

[davidfpc86]

hace 1 hora, Geordiedean1974 dijo:

Any help on getting this past the network discovery step mine just kicks me back to desktop and wont launch

same problem, i use standalone version

[holmes]

il y a 56 minutes, davidfpc86 a dit :

same problem, i use standalone version

Any reason you do not use Teknoparrot?

[Geordiedean1974]

3 hours ago, holmes said:

Do you use Teknoparrot or the Standalone version?

 

The most simple way is to use Teknoparrot.

Go to VirusMan's site.

http://teknoparrot.link.free.fr/

Select Teknoparrot and the Sega PC Based games.

Daytona is there.

 

Ive tried using it both ways still same result gets to the network discovery screen then just closes out and back to desktop

[holmes]

Sorry. Maybe you have a problem of pre-requisites (DirectX or whatever). Have a look at the 1st pages to check what has to be installed.

I have started to install this game a long time ago, so I do not remember what I have installed 1st.

 

[holmes]

Il y a 2 heures, Geordiedean1974 a dit :

 

Ive tried using it both ways still same result gets to the network discovery screen then just closes out and back to desktop

 

Have you tried this?

 

Citation

 

20/04/2020 à 12:36, Boomslangnz a dit :

No he does not. TP does all the patches required on original exe so you do not require any hex edited exe

 

I did the code myself

 

From memory I think you need to go into shelldata.ini and change it to only have 1 cabinet and then it will go past the "network discovery"

 

 

Modifié le 3 août 2020 par holmes

[Geordiedean1974]

30 minutes ago, holmes said:

 

Have you tried this?

 

 

Yeah it says number of cabinets 1 and still the same issue

[goosenman]

Same here - I think I've grabbed a number of different versions and they all do the same. 

[Viwyx]

Am 26.12.2017 um 13:55 schrieb davidfpc86:

CLOSELY:

I have a serious problem. When the game starts it doesn't display correctly. What can i do? I have the fix installed.

 

FR:

I have a serious problem. When the game starts, it does not display correctly. What can I do? I have the fix installed.

 

So this was years ago, and I am having the same issue and I can not find any solution. Am I right in assuming that not all Nvidia cards are compatible??

Modifié le 21 août 2020 par Viwyx

[Geordiedean1974]

how do you get this to run fullscreen?

[holmes]

Le 23/08/2020 à 00:10, Geordiedean1974 a dit :

how do you get this to run fullscreen?

In GameData/config.ini, you have this:

 

[FullHD]
ENABLE_FULLHD = 1
ENABLE_FULL_SCREEN = 1
# 0: disalbe
# 1: enable

 

 

I just checked that when I choose 0 for ENABLE_FULL_SCREEN, I get the game running windowed.

[holmes]

Le 21/08/2020 à 17:11, Viwyx a dit :

 

So this was years ago, and I am having the same issue and I can not find any solution. Am I right in assuming that not all Nvidia cards are compatible??

What card do you have and which fix are you talking about?

[Viwyx]

vor 17 Minuten schrieb holmes:

What card do you have and which fix are you talking about?

 

never mind fixed it 

 

BTW playing it it makes the controller rumble a unreasonable amount. is there a way to change that. i assume it emulates the rumble of the wheel....

[holmes]

il y a une heure, Viwyx a dit :

 

never mind fixed it 

 

BTW playing it it makes the controller rumble a unreasonable amount. is there a way to change that. i assume it emulates the rumble of the wheel....

If you use the FFB Plugin, you can adjust the effects within the GUI.

[kireol]

On 8/3/2020 at 02:25, Geordiedean1974 said:

 

Not working on my machine gets stuck at the network discovery start then just closes to desktop

Follow the instructions on the 1st post in this thread.

[fred1967]

Bonjour à tous,

 

J'ai un PC I7 avec une GTX 960m qui fonctionne correctement mais j'avoue que ne sait plus comment faire avec DAYTONA 3, le jeu se lance bien mais je constate des ralentissements permanents alors que d'autres jeux plus gourmands tournent nickel.

Si quelqu'un a eu le cas, merci de me donner votre astuce car j'avoue avoir tout essayé ( modifié config.ini et game.ini) mais je tourne en rond.

Merci d'avance

[Katcher]

Hi so I recently downloaded and have been playing Daytona USA 3 after finding this thread however I'm having trouble launching the shell.exe. I have the DK2 thing installed and I have it set to compatability for Windows 8 but it just crashes immediately when it loads. Outside of that the game works perfectly for me

[Katcher]

So disregard my last post I found a solution. I'm making a new post for the sake of others potentially googling why Shell.exe won't launch despite having the neccessary dk2win32 driver. The Shell.exe is sniffing around for an audio output, in my experience, on the rear panel audio of your PC. When it fails to detect any output it'll close immediately. So if like me you typically use front panel audio or use HDMI audio, you're gonna need to plug something into the rear panel audio and set that to your default device. Hope this helps people if it was clear enough

[nohero]

I'm playing this using TP and no dk2 drivers installed.

Never had a problem with it.

 

 

CHEERs

 

[Jasper]

Is this Daytona 3 and Daytona Championship the same thing?