pacooka

Any chance to fix the 2 light guns issue that sometimes joined together from some reason?

Thanks delirious, do you have other missing files from virusman site? like Raiden IV (Portrait), Raiden III (Portrait),

That is a path issue, not all content are being loaded, try to move it to c:\sega

If you edited the right ID for each Cab, make sure that you set the right path for your configuration files in \Sega DiRT Showdown\shell\Game.ini, maybe in some more places, try and see if it works

Instructions how to set GRID for LAN gaming: 1. For Cab1, set the private IP address to 192.168.1.2, for Cab2, set it to 192.168.1.3 2. \GRID\Sega\shell\Game.ini should be edit with your router subnet: [Network] Active=1 Domain=192.168.1 BaseAddr=1 3. Edit \GRID\Sega\Grid\debug\config.xml, make sure to change the right path for your installation folder and files: <sega_shell shell_path="c:\sega\Shell" shell_data_path="c:\sega\ShellData" shell_data_ini_path="c:\sega\ShellData\ShellData.ini" shell_game_ini_filename="Game.ini" shell_game_settings_ini_path="c:\sega\ShellData\GameSettings.ini" shell_shutdown_time_limit="60" /> 4.Edit \GRID\Sega\ShellData\ShellData.ini and set the following: [Network] CabinetID=1 // 1 for Cab1 and 2 for Cab2 Enabled=1 Enjoy

WMN6 is LAN supported? I succeed only in WMN5

When can I get the English patch? the link in the first post is down

How do I set GRID for LAN playing with 2 cabs with Teknoparrot? Tried to edit the ini files with no success, anyone has this game working?

It looks like Lost Land Adventure has the wrong executable, TP reports that the .exe is the wrong one… need a different dump ☹️

Where exactly mkdx 1.18? couldn’t find it on post 1

How can I play it with a bezel? arcadeCabView doesn't recognize this game

Check your monitor fps in the NVIDIA control panel

Can you please share again the resolution patch ?

verify both versions are using the same server IP and copy & overwrite the files from PC#2 to PC#1 (probably something went wrong with your files), just remember to set a proper Machine ID to PC#1 after overwriting its files + also check for a proper gateway on PC#1

Thank you, this version works great and has English as default 🙂

I cannot see English in the installation, and in config everything is in gibberish (without encoding installed)

How do I change the language to English ? I downloaded it from the link above and it is partial Russian

just change the following and it will work: game folder\LLA\Engine\Config\BaseEngine.ini change AutoReloadChangedShaders=False

Your screen scan MHz is probably wrong, try to change it

Check both PCs nvidia display settings, make sure they set to 60Hz

I can’t use the letters M & O for choosing a name to my profile, i’m using Logitech g29 wheel. does anyone else having the same issue? ——-solution found—🙂🙂🙂—— My monitor was set to 30MHz instead of 60MHz which lead to some bad things…

Nice to see good people are still dumping arcade games :-)

Yes indeed, you are right but I believe that Nintendo decided to physically rotate the camera so no patch will rotate it in the right ratio. More and more arcade games are getting support for a camera in-game (future arcades too) every manufacture could have a different rotation for his camera. I have 3 Mario Karts arcades connected (2 racing cars and one arcade) my advice is to use the following solution: 1. Using this small & cheap camera, have 3 of them https://www.aliexpress.com/item/1005001975210646.html 2. Rotate 360°, glue the cameras to this item https://www.aliexpress.com/item/1005003004683837.html

Enter the setup menu and set NumCam to - ON, will work with most USB webcams

I don't think it's related to the emulator, a new dump from 2016 or 2018 is required.