customizer2

As said before, you have the same amount of Ram as me, and a much better GPU, I think the problem has to do with GPU.

I kept Windows 10 as my main system and installed Windows 7 in dual boot just to test the game, on another partition. I have no problems with most games using Windows 10, but Star Wars and Xnocross gave me problems on JConfig. I will try next Windows 8.1 64 bits in dual boot again. Regarding the Star Wars issue, I think it has to do with my GPU, it seems the game needs Nvidia GTX to work, didn´t test Xnocross.

I installed Windows 7 64 bits yesterday and Star Wars still have issues on JConfig on my end. The game quits after playing one mission, no matter if I check High Resolution or not. I can finish the mission, but then the loader stops, and I have to start again the game. I wonder if this is a Ram issue or the game doesn´t like my NVidia GPU model ?? I see your GPU is GTX N750, better than mine. How much Ram do you have ?

I play in 1280 x 720, as I have high resolution ticked on JConfig. I have some delay in Windows after leaving the game too, but it quits faster than Teknoparrot.

Thanks for the advice !, I wil try

Hello - Does anyone know how to brake in Star Wars Battle Pod on TeknoParrot ? There is no button assignment for it in the game Controller Setup, other than Throttle. I assigned the right stick of my gamepad to "Throttle". In ENDOR mission I am asked to break in order to get rid of an enemy who climbed my vehicle, and I can only move the stick downwards to try to brake, but the game always says "MISSED". so it seems it doesn´t brake. Can moving the right stick downwards do the job ?

I tested Star Wars BP on Windows 10 and latest JConfig. Sound works fine, Test mode saves fine, but I have the problem that the game quits after one or two missions. I have ticked on Windows 8 compatibility mode as adviced. Could this be due to lack of Ram ? Did anyone have a similar issue ?

Today I tried SNOCROSS again in C: rawart, and found that I was wrong yesterday. The game has random crashes even placed in C:rawart, at least for me, in Windows 10. I give up trying, there may be many possible causes for it, and I don´t have much time to test, maybe the game needs Windows 7 so as not to crash ?

You can install Windows 7 in dual boot with Windows 10 on another partition, or run Windows 7 on a virtual machine - The drawback is that it will take some extra space of your hard disk. If you have VMWare and install Windows 7 x64, maybe it works fine, I didn´t try yet

I don´t know if the version of Windows 10 has something to do with the issue, I have an old version of Windows 10. version 1709. I have heard it works better on Windows 7 or 8 and on early versions of Windows 10, but not sure, maybe the GPU model has to do too with the problem, who knows ?

Are you on Windows 7 or Windows 10 ? It´s weird, are you using only JConfig or RH Loader along with it ?

Yes, it worked for me too if I put on c:rawart, it doesn´t crash. My only problem is that some tracks cannot be chosen. My joystick moves to the next. I cannot choose Alaska and France for example.

Put the game in a folder called "rawart" and then in C:\. So the path should be C:\rawart - That worked for me to prevent the game from crashing. I could play many races without crash, on Windows 10. The game seems to not like long paths. I tried in D: and it crashed, so the best is C:

How do you set up RH Loader so that it doesn´t ask for TeknoParrot folder location ?. I have RH Loader configurated for TeknoParrot in the games KO Drive and Transformers, and points to TeknoParrot folder. How can I use an exclusive RH Loader setup for SNOCROSS, without being interfered by the others pointing to TeknoParrot ?

Could you choose all the tracks in SnoCross ? Because I cannot choose some of the tracks, as my joystick slides to the next I want to choose, this is the selector doesn´t go up in 3 or 4 tracks, specially medium difficult ones, ex. France. I put "rawart" in C:\ and that prevents the game from crashing, but I still have the problem mentioned of not being able to choose all the tracks. How to fix this ? My joystick is new and is well calibrated.

Yes, it seems the game needs a good CPU and 8 GB Ram to run without lag. Anyway, it tried your solution and it was the best for me so far. It really changes the resolution to 720 p and the game runs faster, many thanks !

Thanks for this ! I will try, but I think it is also a matter of hardware and memory. The mission I have more lag is ENDOR, cannot aim well to the targets.

Thanks Spidezsoft ! I will try your instructions. Hope I can run in 1280 x 720 so the game goes faster !

Hello. I could finally run the game, though a bit slow I think due to the high resolution. Match Storm is the same system and runs faster. If only I could lower the resolution, it might help, but I cannot find the way.

Deleted

Thanks again for your interest. Prices in my country are steep for consoles, not so much for PCs and related hardware, if you compare with USA. Argentina and Brazil, for example, have high taxes for imported hardware, so it is far more expensive than in Uruguay. Regarding Q8300 CPU, it is about 40% faster than my CPU, according to the web page https://www.userbenchmark.com, but it would be not enough for RPCS3. And if I have to spend money I prefer a CPU that can run Ridge Racer 7 at least at 30 fps. I think with background music off, it is quite playable. I will have to decide between risking to buy a 2nd hand PS3 console and a PC HD monitor or HD TV, or just buy a high end PC. As Ryzen CPUs are going lower in price, and that also lower Intel CPUs prices, I will have to be careful about what PC to buy, in order to get the best value for money. For the moment, if I could afford it, I would prefer a Ryzen 7 2700 or an Intel Core i7 8700, they are both around the same price ( including a GTX 1050 GPU ).

Just to show examples about how powerful the PC should be to run Ridge Racer 7 with RPCS3. This video shows the game emulated on an Intel Core i5 3570k with GTX 1050 Ti. As you can see, it runs ingame at average 30 fps with stuttering sound. And with Ryzen 7 2700 and RTX 2060 GPU, seems better, but doesn´t show the fps in the video:

My motherboard only supports the following CPUs: Intel Core 2 Extreme - Core 2 Quad - Core 2 Duo - Pentium Dual Core - Celeron Dual Core - Celeron, Penryn Quad Core Yorkfield - Dual Core Wolfdale - These CPUs have a poor perfomance not enough for RPCS3. So if I have to change the motherboard, it´s better to buy a new PC, I don´t have skills to build one myself.

Thanks for your reply, but unfortunately this PC you mention costs around US$ 1500 where I live, there are better options for around US$ 1000, like Ryzen 5 2600, Core i5 8400, even Core i7 8700 ( core i7 8700 with GTX 1050 and 8 GB ram costs US$ 1100.) These are generic PCS that are built upon request.

Hi, thanks for reply ! Unfortunately in my country you cannot buy a PS3 for less than US$ 200. This is for a PS3 SLIM and used in good condition if your lucky. There are many online sellers who sell refurbished PS3 consoles in the range of US$ 250-300, but the consoles come without the original box, just wrapped and with used gamepads. They say they have a limit guarantee but if you find they are not in working condition, sometimes they don´t assume responsability. Some people ( not all of them ) leave negative feedback comments saying that the product came faulty or have small issues, or used and faulty gamepads. So they are not very trustworthy. I can instead buy an used one that I can try before I buy, but there is no guarantee it will continue working for a long time, and the used ones are sold for not less than US$ 200. This is in my country. I live in Uruguay, South America. About the used HD TV, they cost minimum US$ 200 and you don´t know how long will it last after you buy it, even if you buy it in good working condition. Someone said in a forum where I asked, that a HD PC monitor with HDMI was better for playing PS3 with good HD graphics than a HD TV, but on the other hand, I have read that sometimes the PC monitor shows only a black screen and cannot receive the video signal from the console. I trust more in a PC than an HD LCD TV set.