Crafty The Fox

Only Ace final is supported on arcana. use butterfly.

.

.

.

.

.

.

.

.

.

How to setup SpiceCompanion Getting the app setup Make sure you have SpiceCompanion downloaded onto your phone, or tablet. You can download the IOS (ported from android) version here. You need to side load this, and I wont go into how to do that. Or, you can get the IOS version off of the appstore from here. but, this version is slightly older than the android port. For android, you can get it off of the playstore here. Once you have the app downloaded, open Spicecfg and go to the "Options" tab. Scroll down till you see something along the lines of "API TCP Port" and "API Password" After that, click into the box to the right of -api. set the port you want to use for it, and you will need to remember this later. Personally I set this to 1337, as that's what worked for me. Then, click om the box below that and type your password in that box, you will need to remember this later. After that's done, you can close SpiceCFG and open the "SpiceCompanion" app your your device. If your on android, there should be a plus button in the bottom right, click on that. If your on IOS, then there should be a plus button in the top left, and click on that. After you clicked on the plus button, a menu should pop up asking for your password, port, hostname and name. Your "hostname" is your pcs local ip. to find this, go into command prompt and type "ipconfig" You should see something that says "IPv4 Address" then a bunch of numbers. put those numbers in the "hostname" section. put the port that you set earlier into the "port" section, and the password into the "password" section. After that, you can name it what ever you want by pressing the "name" section and typing that in. After that's done, click "Save". You can now start up your game, and click on the server you added. Setting up Cards You can add a card by going to the "Cards" tab after your connected to the server. Then, press on the plus sign to add a card. The "Card Number" should be in SpiceCFG in the "Keypads" tab. Write the numbers\letters you have on spiceCFG into the "Card Number" box, and name it what ever you want. Then click done/save, and click on it again. You can now go to the "Keypad" section and insert your card by pressing the "Insert Card" button.

lmao

wow

i installed KinectSDK-v1.5.2-Setup and KinectDeveloperToolkit-v1.5.2-Setup. my kinect is stable. kinect studio is required to be open i think. I already made a .bat file that starts up kinect studio, then the game.

how do i run music GunGun2? can i use wiimotes for it? haha.

were you able to fix this? im having the same error. edit: i was using the wrong version of kinect studio lol

i have everything. is there a way to save your scores and such? [2020/08/16 06:09:48] W:pkglist: unknown: no list. [2020/08/15 17:09:47] I:debughook: ArkDiagnosisMode::ArkDiagnosisMode is leaved. [2020/08/15 17:09:47] I:debughook: ArkGameMode::ArkGameMode is entered. [2020/08/15 17:09:47] I:debughook: ERRORCODE ACIOERROR2 7000. [2020/08/15 17:09:48] I:debughook: START SCAN EAMUSEMENTPASS.1 [2020/08/15 17:09:48] I:debughook: START SCAN EAMUSEMENTPASS.2 [2020/08/15 17:09:48] I:debughook: ArkGameMode::ArkGameMode is leaved. [2020/08/15 17:09:48] I:debughook: ArkErrorMode::ArkErrorMode is entered. im getting this error when starting up. i have my kinect plugged in. 360 version

i have everything. is there a way to save your scores and such?

dead link

thanks Edit: will this work with spicetools, and in the future will A20 plus blue/ A20 Blue be released?