PHATLEECH

THX VERY MUCH🤪

its inside

https://1337x.to/torrent/3806351/MAME-Over-2000-Roms/

https://store.steampowered.com/app/1376940/Monster_Killer/

you have to use antimicro and set gas to negative https://sourceforge.net/projects/antimicro.mirror/

This is the cams mounted

I (THINK) the key to a compatible cam/webcam is the Crystal Oscillator

THE BOX INFO

I hot glued the caps to the inside of the box than used black spray paint to spay the caps inside the box after you remove the cap you can see were to drill the holes in the box

I noticed when using the webcam you have to turn the cam upside down for Mario Kart and the complete opposite direction when playing Daytona. so I purchased two of the cams put them both in a project box with one of the cams turned one way and the other turned in the opposite direction. I'M also using a USB hub with on and off switches to turn on the left or right cam depending on what game I want to play. I removed the plastic connector from the cam module and soldered a usb cable straight to the pins of each cam the pins are labeled 1-5 |pin 1 red wire or vcc + 5v pin |2 white wire or data - | pin 3 green wire or data + |pin 4 black wire or ground| and pin 5 is not used the cam wont come with a cable trust me Iasked the seller

Cam I use for Mario kart and Daytona USA https://www.ebay.com/itm/SHIKINO-KBCR-M05VU-A-HPB1027-1-4-inch-CMOS-color-sensor-USB-CAMERA-MODULE-JAPAN/202823118282?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648

hey guys whats the make and model of the cam you need for this game its hard to find a webcam with covid-19 going on everybody using them to work from home

can you post a new link for the swarm

can somebody please put a new links

Can you please repost this game please

how do i get Terminator Salvation working i just have 2 isos and how do i get farcry to run i dont understand mount to w drive

can you please repost Terminator Salvation Arcade Game the links not working