lemmingDev

Thanks - is on page 1 under Individuals patches and JConfig and reveal hidden contents

I've seen numerous YouTube videos of Mario Kart 1.18 working with jconfig I've tried using the jconfig from 1.10, but it's not working If I try the patched 1.10 exe with 1.10 mk jconfig along with the 1.18 files, I can get it to load, but it shows 1.10 and crashes just before a race I think I'm missing a patched exe file, as the videos seem to show MK_AGP3_FINAL_v1.18.16.exe, and perhaps there is even a new mario kart specific jconfig - not sure Help appreciated

https://discord.gg/Uh6E7PCY

That did the trick Thanks so much!

My UIO_AMIC and UIO_AMICO files seem to be older versions than yours

I have tried both 1.9 and 2.0 jconfig, both x86 and x64 They both work on 3.53, but not on 4.12 I got game from archive.org

Unfortunately not for me, though it works fine with 3.53 Is there a specific version of jconfig or idmacx I need? Any help appreciated

Any way of getting 4.12 to work with jconfig? Works for me with 3.53, but not with 4.12 - it crashes with fatal error Fatal error! 4.12_StreetFighterV.exe!UnknownFunction (0x00007ff6b11419de) + 0 bytes [UnknownFile:0] 4.12_StreetFighterV.exe!UnknownFunction (0x00007ff6af3c22df) + 0 bytes [UnknownFile:0] 4.12_StreetFighterV.exe!UnknownFunction (0x00007ff6af37500f) + 0 bytes [UnknownFile:0] 4.12_StreetFighterV.exe!UnknownFunction (0x00007ff6af3714fa) + 0 bytes [UnknownFile:0] 4.12_StreetFighterV.exe!UnknownFunction (0x00007ff6af39f4b1) + 0 bytes [UnknownFile:0] 4.12_StreetFighterV.exe!UnknownFunction (0x00007ff6b081353e) + 0 bytes [UnknownFile:0] 4.12_StreetFighterV.exe!UnknownFunction (0x00007ff6b0aabb3c) + 0 bytes [UnknownFile:0] 4.12_StreetFighterV.exe!UnknownFunction (0x00007ff6aff0f092) + 0 bytes [UnknownFile:0] 4.12_StreetFighterV.exe!UnknownFunction (0x00007ff6aff0f0ed) + 0 bytes [UnknownFile:0] 4.12_StreetFighterV.exe!UnknownFunction (0x00007ff6aff18bf9) + 0 bytes [UnknownFile:0] 4.12_StreetFighterV.exe!UnknownFunction (0x00007ff6aff7f29d) + 0 bytes [UnknownFile:0] 4.12_StreetFighterV.exe!UnknownFunction (0x00007ff6b0abcfa7) + 0 bytes [UnknownFile:0] 4.12_StreetFighterV.exe!UnknownFunction (0x00007ff6b0abf51f) + 0 bytes [UnknownFile:0] 4.12_StreetFighterV.exe!UnknownFunction (0x00007ff6b094c5fb) + 0 bytes [UnknownFile:0] 4.12_StreetFighterV.exe!UnknownFunction (0x00007ff6b08b61cd) + 0 bytes [UnknownFile:0] 4.12_StreetFighterV.exe!UnknownFunction (0x00007ff6af0aaacf) + 0 bytes [UnknownFile:0] 4.12_StreetFighterV.exe!UnknownFunction (0x00007ff6af0a3cbd) + 0 bytes [UnknownFile:0] 4.12_StreetFighterV.exe!UnknownFunction (0x00007ff6af0a3d0a) + 0 bytes [UnknownFile:0] 4.12_StreetFighterV.exe!UnknownFunction (0x00007ff6af0ab310) + 0 bytes [UnknownFile:0] 4.12_StreetFighterV.exe!UnknownFunction (0x00007ff6b1976825) + 0 bytes [UnknownFile:0] KERNEL32.DLL!UnknownFunction (0x00007ffe79d97ab4) + 0 bytes [UnknownFile:0] ntdll.dll!UnknownFunction (0x00007ffe7b89a351) + 0 bytes [UnknownFile:0] ntdll.dll!UnknownFunction (0x00007ffe7b89a351) + 0 bytes [UnknownFile:0] Interestingly - if I put the 3.53 exe file into the 4.12 folder, it runs fine, but still says 3.53 when in game I guess jconfig needs updating I assume 4.12 is patreon if loaded with tp

https://discord.gg/Pfm3FAU9

https://discord.gg/rEFfFZ72

Step 1 Download the new community patch v1.3 and follow the instructions to install over the top of base v4 or v4.1 ARTAX https://discord.gg/Ms4KNgWB Step 2 After the restart, go to the Utils menu and select 'Enable JoyToKey' Step 3 After the restart, your xinput gamepad (and most others) will work perfectly Step 4 Enjoy all of the new features

Hi Is there a way of setting this up so the keyboard escape key (and xbox select+start as an option for others) exits the game? I'm on a cabinet with some special mapping software and can't get it working. I even have an AHK script that maps esc to alt-f4, but that doesn't seem to work, even though pressing alt-f4 on a physical keyboard does work to close it Thanks

For those people installing this image on a regular PC or Laptop that doesn't support legacy/IDE mode, here is a short guide on how to get it working This process will work for a SATA SSD and/or NVMe SSD Make sure you've already written the ARTAX image to a SATA or NVMe SSD using Balena Etcher or similar You then need to convert the drive from MBR to GPT, and also create an EFI partition (used on GPT disks) instead of a system partition (used on MBR disks). The best/free way to do this is use Microsoft’s own tool mbr2gpt, however I couldn't get it working, so the following steps are the long way around... Download Hiren’s Boot CD from https://www.hirensbootcd.org/files/HBCD_PE_x64.iso Use Rufus or ISO2USB to write the Hiren’s iso image to a USB stick Install the SATA or NVMe SSD drive into a PC or laptop. Make sure no other SSDs, HDDs or USBs are connected Boot from Hiren’s USB stick (you may need to use the BIOS boot selection menu to boot from USB) Once Hiren’s is loaded, open Utilities-->Hard Disk Tools-->Partition Tools-->DiskGenius Right click on the disk (not the partition) and select Convert to GUID Partition Table Click Save All in the top left to apply the change Congratulations – Your disk is now GPT; but Windows won’t boot yet as you have to create an EFI partition and add a boot entry; so let’s do that now Close DiscGenius and open Utilities-->Hard Disk Tools-->Partition Tools-->EaseUS Partition Master Right click on the E: ARTAX_4.1_GAMES and select Resize/Move In the second diagram with the single blue partition, drag from the right of the main coloured partition on the black dot, right to the end of the diagram. It will tell it to take up any unused space on the disk and allocate it to the main games partition. I got an extra 22GB doing this. Then click Ok, and then Execute 1 Operation Once this is done, right click on the 520MB ish partition on the same disk, and select delete. Accept warning and then Execute 1 Operation You can then close EaseUS Partition Master and open the Command Prompt shortcut from the desktop After that, use this tutorial to create the EFI partition and boot entry https://hub.tcno.co/windows/recovery/recover-boot-partition-efi/ Start from the Restoring the EFI Partition section about 1/3 way down the page Once you get to the All Done stage, you have now successfully created your EFI partition and boot entry You should now be able to boot the drive in AHCI mode instead of legacy mode Troubleshooting When booting from the drive, if Windows opens to a black screen, but Attract Mode doesn’t launch, it’s because your drive letters have mixed up with all of the partition changes. Ctrl-Alt-Delete and select Task Manager Then File – Run new task Then type in diskmgmt.msc Then right click on any partitions that have the letter F: and select Change Drive Letter and Paths. Select Change and in the drop down, select a high letter such as X. Click Yes on the warning Then right click on any partitions that have the letter E: and select Change Drive Letter and Paths. Select Change and in the drop down, select a high letter such as Y. Click Yes on the warning Then right click on the ARTAX_4.1_GAMES partition and follow the same procedure to set the drive letter to E: Then right click on the ARTAX_4.1_SAVE partition and follow the same procedure to set the drive letter to F: Reboot and it should now be running Once it's up and running, you should load the controller patch I attached in an earlier post to be able to use Brook or Xbox controllers, or even better, join the ARTAX image community Discord and install the v4.1 community patch which adds the controller patch and more... https://discord.gg/vPk88Jge

Head back to that Discord A v4.1 patch has appeared

So, if anyone is keen, I've created a guide on how to flash a modded BIOS to your TTX4 to patch in NVMe boot support. This enabled me to ditch the SATA SSD and use a PCIE to NVMe adapter https://drive.google.com/drive/folders/1tQe8zZbg695VsNKoiGyFBb0MV0aToBz_ I added an updated version of the guide that goes through how to create an EFI partition and create a boot entry so that you are able to still boot from your ARTAX drive. It also shows how to allocate any unused space to the E: (I got an extra 22G) New speeds The 1.1.1 community patch is for v4 WILL NOT WORK WITH v4.1 (without modification) WARNING - It will break your v4.1 install