Tiberius

@ginzu Need a little bit of your Mode 2 wiibar knowledge - Have got this working without any AHK's as well-but there is a cursor tremor when you have the cross hairs up - is this normal on mode 2? Will do a video of mode 4 vs mode 2 so you can see the difference.

Exciting news for Wiimote users.........(and maybe other light gun users as the idea might be applicable to them as well especially ones that are seen as a mouse) Have got this working and playable in Mode 4 and Touchmote-needs some fine tuning before a full share No ahk needed either on any of the buttons. Loads, add coin, skip scenes, aim and shoot (sometimes even hit!!--I never said I was good at the game) and exits all from the comfort of a Wiimote. Going to go make it 100% for mode 4 users, and then get it to work in Mode 2 as well for the Mode 2 users (think this will need the use of ahk though) before making a video and then sharing. Just wanted to let people know progress is being made

This is link I used to set up PCSX2 for ONE wiimote as one player. Yes I know it talks about Aimtraks but the theory is the same however it can only be one player at moment in mode 4 which is all I know about. Read the whole thread. Watch the video as well. I got it to work from this info on ONE player using mode 4. If you want two player then as mentioned before try following the same guide for aimtrak no promise it will work but if you do get it working you can make the video and help others out http://forum.arcadecontrols.com/index.php?topic=151385.0 Mame 2 player I have given you a link for this before for setting up in mode 4 and with Touchmote. No idea if you are still wanting it in Mode 4 or 2 as you change from one to another.

@ark216 Sorry dude, think I misunderstood, thought you were trying to do it two player with one wiibar and mode 4, obviously not paying attention or reading correctly From my limited understanding the reason it needs two wiibars is to make the emulator see it as two seperate mice, using the Nuvee plugin, which again is an assumption as not the way I do it. I use the Nuvee plugin but with only one bar, so only one mouse and trying to make the other work as a "joypad" but it isn't as smooth as a mouse As the plugin sees the Aimtraks as two seperate mice then following a guide for that and adapting it slightly should work. I say should because I used am Amtrak guide to set up the one wiimote as a mouse, and the only reason I can see for it not working here with the one bar on mode 4 and Touchmote set up so that the wiimotes are mice is that the wiimote is emulating a mouse and therefore they are both a system mouse rather than seperate items with their own GUID's As I said this is all guess work on my side as I don't do it the two bar way.

@oroborus77 Sorry hadn't seen your update with issues. The config file is copied 4 times into the id1 folder, where it should be made as config.new.new when you first open Quake and then set up your keys, and not the main folder. I am at work at the moment (obvously not busy here!!) but when I get home I will upload my cfgs for you to try, you won't like my key layout but if it gets all the other bits working you can just change those to suit your needs.

Currently have 16 PCSX2 light gun games working here, with Wiibar and Wiimotes. Most use Mode 4 and Touchmote, some use other options-Unfortunately they are currently only 1 player in the main. Have spent days and days on this trying to get player 2 and make some progress but then get fed up so leave it alone for a while. I know adding a second bar would make them playable as 2 players but having set up so much with just 1 wiibar I don't fancy going through and changing all my work just for 16 games. All the info to get them working came from info that is already online, on this website or others,and a few days work, trial and error, but the actual basic stuff of getting one player was quite simple, it was the implimenting it into frontends, automating it all, and trying to break the 2 player issue that has taken most of the time. I don't make videos because I don't want to, don't have the ability to and also because I prefer to work from text, which is already available. Some of the games require use of ahk's to make them work and all that stuff can be learnt from https://www.autohotkey.com/docs/AutoHotkey.htm Which has been a huge help in figuring out how to bind keys. make guis and lots of other stuff that I knew nothing about until about 9 months ago. So what have you tried to do to get it to work? and what about it isn't working?

Managed to get it to work with new game and save new keys-this works for me but doesn't mean it will work for everyone, however worth sharing. I have also got it working without installing nglide. 1) Put the Quake Arcade Tournament Edition folder on root of C drive 2)Cleaned out folder so it looked like this 3)Within ID1 folder deleted the following; backup.cfg config.cfg config.old.cfg default.cfg 4)Made target within glquake_decrypted shortcut "C:\Quake Arcade Tournament Edition\glquake_decrypted.exe" -nogci -width 640 -height 480 -bpp 32 5)Opened game using shortcut 6)Set up Arcade menus and key bindings as wanted-use arrow keys to move around menus and enter to select 7)Exit game 8)Copy newly made config.new.cfg file from within ID1 folder and rename as the 4 above deleted files AND make READ ONLY in properties 9)Reload game and all should be good to go including being able to start a new game rather than using the load game routine. I tried different resolutions but kept getting errors, and this matches to the arcade resolution I haven't got the 3dfx logo part showing on mine but I think that might be because not using nglide at this end

Read the following. https://forums.launchbox-app.com/topic/34653-guide-cheap-arcade-light-guns-with-touchemote/ I started off with this and it's really helpful. The thread goes on to talk about more than just Mame including Supermodel 3 set up. Not sure if you use Mame or have got that working.... If not its an extra bonus as you can find out about that at the same time. I don't have any videos or such as I prefer text to follow and as said this got it working for me. Hope it helps.

I just tried my PS3 camera on this for you. I couldn't get it to work though. Used CL drivers to get Windows 10 to recognise camera. Changed option within test menu per front page. Rebooted several times to check but each time it got stuck at the camera checking part of load up screen. Just said checking and stayed there.... Left for a couple of mins and no progress.... No error message either though. Happy to try something else if you have any ideas.

Honestly.... No idea. It is whatever this set comes with. This is not an attempt to sale anything and hopefully if is not against any site rules. https://www.amazon.co.uk/EG-Joystick-Buttons-Retropie-Raspberry/dp/B075J882S8/ref=mp_s_a_1_3?dchild=1&keywords=Eg+starts+arcade&qid=1588101886&sr=8-3 Cheers

Below are AHK's and "helpful" info Yes I did using AHK's below Attached are 2 ahk scripts. Joysticks.ahk and joysticks.exe are for the joysticks remapping - I know you are surprise by that!! Madden is to use with a front end to load everything and close everything with one simple file I imagine you will need to change the "1Joy10::x" parts to be the correct arcade button you want. The bit from "2Joy6" to "return" is to allow player two to select their team in team selection screen by holding down button 6 on their arcade box...after this button 6 isn't used. It is a dirty work around and best I could get. If you decide to use Madden.ahk and Madden.exe obviously you will need to change the pathways in it for your setup. I have a shortcut to shell.exe (which is kept on C drive root with the rest of the game) in the same folder as the ahk is kept just to make things easier for me which is where the 2nd Run command is aimed at. I also use Press and hold joystick button 8 for 5 seconds to close everything (Escape is my backup button in case it goes wrong) Hopefully that explains everything. Some of this is my work and some found from Google searches, I am afraid to say I cannot remember who or where I found it from so apologies for not crediting the original work. Just remembered this originally came with a launcher (I think?), I can't remember why but I didn't use that, there was a reason at the time (but all I remember is spending days on this to get it to work and the rest I have blocked from my memory for the sake of my sanity) however if you are using the launcher then the Madden ahk and exe will be a waste of time

I had a nightmare setting this up, I think for maybe the same reason, in the end I cheated. As I couldn't change the controls in here, I used Autohotkey to remap my arcade sticks and buttons to match the default controls, and then ran that AHK only when playing this game. Not sure if that will work for you?

Are you trying to do this with the bar on mode 4 and wiimote as an xbox controller or mode 2 and as a mouse? As you have been mentioning both 1)+ and - act as Windows volume buttons when bar in mode 1(multi media status) as explained in wiibar instruction leaflet. 2)Nope. 2 wiimotes working here and I don't own an xbox. 3)Because it isn't set up correctly. 4)Not the same as mine. Does it direct load Demulshooter Rambo hidden window and direct load Rambo game? But as this is last step makes more sense to get working before trying to make a bat file otherwise hard to find the error or errors. 5)No idea on that one.

Had you installed divx6 as suggested in this thread? I think that was way of getting over the AVI error originally but if your way works as well grand. Have you used the resolution changer? I know mine loads full screen directly. I think I did it via that. Unfortunately I cannot check anything at the moment as pretty sure my PSU decided to die on my last night as computer turned off mid use and now won't restart even with the good old paperclip trick.

Deleted post. Ignore this I misread it as that you were using DemulshooterX64 but then noticed in 2nd post shortcuts runs Demulshooter.exe Apologies

Look at the image in post number 9 on this thread and it shows it. 1 Open Touchmote 2 New key mapping 3 Name it 4 Set up profile 5 Hook to application - 2nd tick box down - tick it - Replace the default text with Budgieloader.exe 6 Close Touchmote 7 Open Touchmote to check it has saved. 8 Test it This key mapping profile will load with games that open with Budgieloader.exe (Lindbergh games)

I thought it made more sense to take the zip file on his tutorial that he made, as that includes ini files for both players already made, whereas mine all only include one player, due to the limitations of playing on Wiimote.

I use the technique as shown on this page http://forum.arcadecontrols.com/index.php?topic=151385.0 I am just copying Argonlefou (creator of Demulshooter) idea rather than having come up with it myself. Each game has its own config files (which he very kindly supply for some games) and these are all saved in their own folders - named after the game. People would need to change the GUID in the ini file to their own GUID I would imagine. I then run a different AHK depending on the game I am going to play - the AHK is set to run and complete before PCSX2 opens up- This might be able to be set up to capture the game name and then use that to move the correct ini file but I am not that clever so do it the longer way which know. The below moves Crisis Zone (Technically it copies and over rides what ever config is already in inis folder - advantage of this is don't need to move it out again at the end as only a copy "moved" rather than the original As you can see I only move GUNCON1 as I can only do 1 player with WIImote and PCSX2 - but just adding another line with guncon2.ini instead would solve it for others FileCopy, C:\Users\User1\LaunchBox\Emulator\PCSX2\Gun settings\Crisis Zone\nuvee_ps2_usb_guncon1.ini, C:\Users\User1\LaunchBox\Emulator\PCSX2\inis, 1 FileCopy, C:\Users\User1\LaunchBox\Emulator\PCSX2\Gun settings\Crisis Zone\nuvee_ps2_usb_main.ini, C:\Users\User1\LaunchBox\Emulator\PCSX2\inis, 1 Hopefully this is helpful Cheers

Hi Oroborus77 The settings can be changed without going into the nuvee plugin config everytime it just requires some file manipulation before PCSX2 loads up. I have it set up on my system with Launchbox so each game inputs the correct config file into the Inis folder in PCSX2 and then the game boots directly. Would this work with this system?

I make no promises that this will work for you, but give it a try and maybe adapt to make it work for you I use Wiimotes, Touchmote, Demulshooter, Launchbox and Mayflash Wiibar - it is all automated via Autohotkeys and bat files so you are going to need to change pathways and such to make it work for you , I have included the main .ahk and .exe file. I have also commented this one to try to make it easier for you to make the changes you will need to make - It will NOT work straight out of the box. Most of this stuff I have learnt from here or numerous searches and lots of reading, trial and error, I have not included the bat file for Touchmote and Wiibar as I have no idea if you use either and I think that the USB/VID numbers in Devcon might be different anyway, so you will need to comment out or remove from AHK, I uploaded whole thing so you can change whatever you need to. It also uses nomousy - you don't need it for this game, as the mousemove part is a dirty work around, but it is a handy tool to have for other games so worth looking into and figuring out. If anyone can see improvements in it please let me know as I am self taught so might be doing things the hard way. Oh hopefully I have uploaded this correctly - it is first time so if anything wrong I am sorry

Hi Susoarkangel, Did you manage to get Operation Ghost at the correct resolution for your screen? If not I might be able to help with a very ugly Autohotkey that I use to make it full screen on my monitor. In theory it works on any screen size so should work on yours ok, I direct load Operation Ghost so not sure if it will cause an issue with TP or anything else. Regards

Hi STF Do you still have a copy of The Troubleshooter mentioned in your tutorial, the only site link I could find to it was no longer valid. I have been trying to set up PCSX2 with dual Wiimotes and am having an issue of only being able to get one Windows cursor at a time when emulating the mouse, I have tried Glovepie-Party Mouse, MouseMux and such like and can get each player to work individually but because they share a Windows cursor both players cannot shoot at the same time. Thank you in advance for your help

Stupid question I expect... but you are using Version C of HOTD4? Demulshooter only supports that version now rather than the older version

Found this for PCSX2 http://forum.arcadecontrols.com/index.php?topic=160807.0 I have managed to get it working for the game versions I have. It does still only allow 1 player at the moment, so much the same as Wiibar in mode 2 I imagine, but someone with more understanding and intellegance might be able to do something with it to make it work for 2 player? Games that can be played are below. It is VERY SPECIFIC-wrong version does not work) Time crisis2(SLUS_202.19) - Got and working Time crisis3(SCAJ_200.60) - Not gotCrisis zone(SCES_525.30) - Got and workingVirtua Cop Re-Birth(SLPM_622.05) Not gotNinja Assault(SLPS_202.18) Not gotVampire Night(SLUS_202.21) Got and workingSilent Scope 1(SLES_500.37) Got and workingSilent Scope 2 - Fatal Judgement(SLES_502.84) Got and not working

Glad to hear it worked for you. As I don't use Hyperspin not sure about the fade in stuff, but I assume that it is like the loading screen in Launchbox/Bigbox. On my system it is a static screen with images and I use autohotkey to make a small window appear with the info. I use same file for all lightgun games for all emulators as it is part of the routine for bar and touchmote to also work. I agree with the constant tinkering to make things better and then something goes and gets updated and breaks it all.