BlueSupernova22

i have both but neither of them work.

I disabled the overlay on my amd software and it still did not work. I even tried booting on windowed mode just to see if it was a full screen issue of some sort but it still did not work. I am even using the latest bemani tools, still nothing. I too am starting to believe that this game does not work well with the latest drivers on the newer hardware. Because if i remember correctly, the game can work on new hardware if you use the microsoft basic graphics driver.

okay this is ridiculous idk if its just my computer or what but not matter what the game refuses to boot for me on my desktop (Ryzen 7 5700X RX 6700 XT) no matter what it just a black screen and it stays that way no matter how long i wait forcing me to Crtl+Alt+Dlt sign out everytime. what's even more ridiculous is that it works perfectly on my laptop (Intel Core i5 7300HQ Geforce 1050). Seriously is there some sort of spec compatibility issue or something? Or is there something blocking the game from booting which i should be aware of. Because seriously,this is ridiculous.

um the one from archive.org that you linked is actually FOR the SuperNOVA 2 US

what game is this? also judging by the fact that the game is able to run means that your setup is correct but im not sure about the group id error since that seems to an in the game itself are you sure the rip is clean?

then i guess that means that there is no way to get this data then right?

can someone please seed the japanese data im stuck at 96.7%

that usually happens if there is a bm2dx.dll file in the contents folder of the main ldj folder. make sure the bm2dx.dll is only in the modules folder

okay i managed to finally get it working. i apologize for ignorance and stubbornness. however after trying it. i don't think i'm gonna reccomend this method since it can lead to screen lag and just stick to native touch screen if applicable. also i cannot use my e-amusement pass on tdj mode for some reason because when logging in i get unable to connect to server and looking at asphyxia there is this error: (this only happens in tdj mode it does not happen in ldj mode)

i just tried it and this kinda further proves my point. it doesn't natively mirror the second screen to the tablet. it only mirrors the main screen and you can only mirror the subscreen when you use the toggle to switch screens (the page up button). the touch controls do work though so you can interact with the subscreen but the fact that you have to switch back and forth between screens is kinda redundant.

thats only to get the spicetools companion app to work. i'm talking about the iidx lightling model subscreen. but it doesn't matter because like i said, when you are using a tablet as a second screen to your pc (especially with apps) it does not use the computer's gpu to display the graphics to the tablet but a virtual one, leading to the blank screen. To further prove my point. i connected my computer to my tv to test out the two and it ended up working. my monitor is displayed as the main screen while my tv showed the subscreen interface. again because my tv is directly connected to my computer's gpu

this one worked thanks so much! Edit: okay even though i managed to get it launch in tdj mode, the sub screen is just white. I'm using my samsung galaxy tab a8 as a sub touch screen and yes the resolution is 1080p. in that case has anyone tried to use actual touch screens with this game because after going through this forum. people have either had little to no success so just wondering. Another edit: y'know what looking back i think the reason why its not working on my tablet is because im not using my gpu to display the screen on my tablet. because technically using a tablet as a second screen using software does not use the computer's gpu to display the screen. at this point the only methods i could think of for a touch screen display would be a usb touch screen, or using touch screen laptop and then connecting it to a monitor or tv and have that be the main display while the laptop touch screen can be set as the sub display

okay so how do you guys get tdj to work at all? i mean i followed the instuctions such as deleting the japanese in the first line of the ea config. at least i think i did. the first line says this. <!-- ‚±‚̃tƒ@ƒCƒ‹‚É•ÏX‚ð‰Á‚¦‚½ê‡‚ÍA‚·‚®‰º‚É‚ ‚é"revision"ƒ^ƒO‚Ì’†g‚ðƒCƒ“ƒNƒŠƒƒ“ƒg‚µ‚Ä‚¨‚­B --> like what part specifically am i supposed to delete from this? i cant delete the entire thing because spicetools will give me an error saying that it cannot read the ea-config file and also is there seriously anything else i have to do because just enabling tdj mode in spicetools config doesn't do anything. and i also do have the lightning mode patches enabled but still refuses to boot into tdj mode so i'm stumped

what about the windows os volume itself (im pretty sure iidx uses WIndows 10 embedded) because even after reinstalling windows it uses a generic High Definition Audio Device driver for sound. which is still enough to give off even hi res audio (i believe so) and even after reinstalling windows the volume usually defaults to 67 which can be adjusted by clicking the volume icon on the taskbar of windows but since this is windows embedded and the desktop is probably not accessible your only option is to plug in a keyboard with volume buttons to the pc of the iidx cab and hold the volume up button until it maxes out to 100

To repeat what i said before on how: just open the ps2_nvram file with a hex editor and highlight the first eight bytes from the 0x1E0 offset, copy and paste it onto a new hex document and save it as a ilink_id.bin file

for the mame dumps there is no need to update the dongles. updating the dongles are only for the dumps that were posted here before the mame dump. for the mame dump all you need to do is use the dongles that came with the romset. if it's ver.aaa then the dongles should be like this. (ds2430_black_gqgdjaaa) and (ds2430_white_gqfdhaaa.bin). If you are using the non-mame dump you would have to use the dongle files from the mame japanese ddr romsets since those are japanese dumps. if there are error make sure that in the python2.ini (avx build) or (game name).py2 (qt Build) you point the files to the correct location. one more thing if you are using the qt build of pcsx2 make sure to restart the emulator when making changes within pcsx2's settings or restarting a game after starting one.

the security dongles can be updated but the hddid and ilink are tied to the game so they dont have to be updated.

i forgot to ask do you also have the ilink file as well? ps2 home version? yes. but the arcade version? no.

which version are you trying to run. is it the mame chd dump or the dump from the previous pages otherwise make sure the dongle files are also the correct region as the japanese versions of the game use the "jaa.bin" while the american one uses the uaa.bin dongle files. also when using the qt build make sure to restart the emulator when making changes within pcsx2's settings. Edit: forgot to add also when rebooting a game.

wait how did you beautiful life to show up?

Im sorry but is there another way to get all the updates BESIDES Teknoparrot please? because again uptobox is NOT available in the US.

which dump are you trying to run? is it from the mame chd dump or the non mame one that was first posted here? also if you are using the non-mame dump try using the new security dongles from the mame romset dump because according to the troubleshoot page on the github wiki the security id error happens on the new versions of pcsx2 is because the security dongle files are invalid.

yeah i saw this before. I don't think this is pcsx2, this is probably captured from real python 2 hardware. there must be some sort of server active that supports the game but it's probably private.

it really doesn't need internet it just needs a network device enabled in pcsx2's settings for the initial boot. and then afterwards you can just disable e-amusement in the game's operator menu and it should be fine without a network device afterwards since it enters local mode. As for Beautiful Life as far as i know, there is no official way to play the song on pcsx2 without patching the game at least.

yeah that happened to me to after setting up the game on pcsx2 but then i realized that i have to restart pcsx2 every time i make a setting change or switch games. so basically restart pcsx2 every time you want to boot a game (the qt build at least idk about the wx build). you have to use chdman.exe which you can get from a mame installation (depending on where you extracted it, it should be in the root mame folder group along with the mame.exe) put chdman.exe in the same folder as the .chd file itself then open command prompt by typing cmd on the top bar of windows explorer. use the chdman.exe extractraw command and then input the chd file using -i (chd filename here) then output using -o (whatever name.raw) for example i used the supernova 2 american chd. in this case it would be chdman.exe extractraw -i gdj_uaa_2007100800.chd -o ddrsn2u.raw