gojirien

Hi guys, Where is located the id6 card.bin ? I have my ID8 card.bin in roaming \teknoparrot, but i don't see another card.bin.

@koba46 @garfield63 Just plugged my Logitech g29 steering wheel, the D pad works and is recognized as menu buttons ! Edit : so it seems hardcoded yes, and is working on some steering wheels.

Oh, that's a pity. Strange that it has not been put in segatools yet.

@garfield63 Thank you man, just one thing i don't understand : when you choose direct input wheel, can you use the arrow keys on the keyboard in order to move in menus, or is it just impossible ?

No but Garfield tried it, it seems mapping of menu buttons is still unavailable For those Who are using a steering wheel, how is it ?

Yes, with the xinput. But if i want to play with a steering wheel, i can no longer move in menu, right ?

Sorry if a stupid question, directional mapping is not on the keyboard ?

You have the same issue i had. I solved it with firewall permissions, dns settings changed, and by disabling the Http.sys that used the port 80 on my PC. I don't know that's going on with you, of you have already checked all of this.

That's weird, everything seems ok.

@petje Thanks man, i'll give it a try. Does it interfere with steering wheel or is it totally independant ? @highmanchoi Maybe you can check if your antivirus/firewall/win defender has done something ? Also does your command window show anything wrong ?

@vegita8888 Glad to see it's working for you Google and especially Kobe were really helpful for me. I followed suggestions from Kobe about network and allnet errors, and found the solutions on google. Some things can be tricky though, for those Who are not used to use command prompt and to manipulate network/firewall parameters

@ItsGoofyTime As i see on your cmd window and as far as I know, your game runs fine. Do you wait enough time when you launch the game ? In my case, it takes between 30-60 seconds for the game to show up on the direct 3d window. Also, once you click on start.bat, do not click elsewhere, as the direct 3d window (actually game window) will turn to black screen immediatly.

Thanks again. Problem solved, i had to change the dns, + allow several things in my firewall (initial d exe, server exe, I even had to relaunch minime and allow it for my firewall. Now everything seems to work properly, allnet ok, and i could create my card. Thanks a lot.

@Kobe46 My network is : Computer -> PLN (power line network) -> router/modem (one unit) -> Internet If i understand correctly, I should plug my computer directly to the modem ?

Well, i tried disconect my computer from the internet, i still get error 8008 (cannot connect to allnet router). I changed the subnet adress to 192.168.100.0, i now get error 8302 at card insertion (server maintenance in progress). I'm lost at that point^^'.

ok, solved this thing, I had to disable autoneutral in segatools.ini. I tried to create my card, I get error 6503 when I press and hold ENTER ("cannot read"). Card read test in test menu works though. I forget to mention, i have error 8008, allnet error at the beginning , but i can play. Édit : oh, i see Kobe had a similar issue, i will try to disconnect network on my computer and see if it wolves the allnet connections error and card reader error.

Many thanks Kobe. Are you using a pad or a wheel ? That weird thing with gear shift using my xbox 360 controller makes me crazy. I can't downshift although the key is set up.

I followed your supositions and finally found that something in windows was already using port 80 (in fact : HTTP.SYS process). I had to do these in the command prompt (run as admin) : net stop http /y followed by : sc config http start= disabled Many thanks Kobe for your help. Game is running just fine with 360 controller, just have a weird thing : although MT is selected, I start the race with AT, and if I do shift UP it changes to MT. I can go until the 5th gear, but at that point I cannot shift down anymore^^. I'll try with a logitech G27 or G29, I'm planning to buy one. Oh, also for the card saving, I saw your recommandation : Press start on controller. Press and hold the "Enter" key on the keyboard. Once the card is created, then to exit properly: Press 1 on keyboard, then press 2 on the keyboard to navigate the menu, navigate to "System Test Menu" and then Press 1 again to accept. Select yes in next screen. This will exit the game properly. But, does it mean the saved card will automatically load with the next start up ?

Nodejs seems to encounter issue when installing additionnel tools. It is stuck. Also in minime, i still have the following(corresponding step 11 and 12 of the tutorial) : app:switchboard HOST_EXT: 127.0.0.1 (Service host name sent to clients) +0ms app:switchboard HOST_INT: 0.0.0.0 (Bind address) +4ms app:switchboard Using default host names, change them from the .env file if necessary. +0ms Startup OK events.js:187 throw er; // Unhandled 'error' event ^ Error: listen EACCES: permission denied 0.0.0.0:80 at Server.setupListenHandle [as _listen2] (net.js:1283:19) at listenInCluster (net.js:1348:12) at doListen (net.js:1487:7) at processTicksAndRejections (internal/process/task_queues.js:81:21) Emitted 'error' event on Server instance at: at emitErrorNT (net.js:1327:8) at processTicksAndRejections (internal/process/task_queues.js:80:21) { code: 'EACCES', errno: 'EACCES', syscall: 'listen', address: '0.0.0.0', port: 80 } Édit : seems i have another issue, the game screen turns black as soon as i click on it. Weird.

Ok, thabks Kobe and sky2310, Error 0919 gone :). Now i'm getting Error 8114 (ALLNET connection failed). Just verified my IPV4 adress, I put the correct one.

Probably same issue as me. You have to desactivate your DVD drive.

I get error 0919 when loading the game, says "leave DVD drive connected" or something like that. My DVD drive is connected^^.

I get error at step 11 : app:switchboard HOST_EXT: 127.0.0.1 (Service host name sent to clients) +0ms app:switchboard HOST_INT: 0.0.0.0 (Bind address) +4ms app:switchboard Using default host names, change them from the .env file if necessary. +0ms Startup OK events.js:187 throw er; // Unhandled 'error' event ^ Error: listen EACCES: permission denied 0.0.0.0:80 at Server.setupListenHandle [as _listen2] (net.js:1283:19) at listenInCluster (net.js:1348:12) at doListen (net.js:1487:7) at processTicksAndRejections (internal/process/task_queues.js:81:21) Emitted 'error' event on Server instance at: at emitErrorNT (net.js:1327:8) at processTicksAndRejections (internal/process/task_queues.js:80:21) { code: 'EACCES', errno: 'EACCES', syscall: 'listen', address: '0.0.0.0', port: 80 } Appuyez sur une touche pour continuer... And same error nas the other guys at step 12? no matter I change ri*un as administrator or not, same errors

Many thanks, I'll give it a try. Sorry if it's a stupid question : does saving work ?

Great, thanks mate.