Kobe46

Cannot tell which Windows version you are on but if you are on 7, there could be issues. If you are on Windows 10. The first error on opening Start.bat from the mimime installation, looks like you are unable to access the package.json location, this could be that you might be missing some dependencies. Have you installed the LTS version of nodes.js and during the installation check box for Chocolatey/other tools to install as well. Could take a bit to install. When finished, make sure you also install the vc_redist_x64.exe, and vs_community.exe; then confirm the permissions on the files for minime folder. Right click, properties, change permissions to be not-read-only. Please confirm that your folders&files in K:\SDFF_1.31.0\ are set to not-read-only. Hard to tell from screenshot. Run as administrator once with the start.bat in K:\SDFF_1.31.0\, you should get the .\inject.exe error and then run it normally and see if it gets the same issue? @subaru052003@yahoo.com.tw @segaoutrun123 That issue is still related to permission and possibly DNS issue. If I remember you changed your local network DNS to 8.8.8.8 and 8.8.4.4. Depends on your network and how you are setup, if you are setup on: Computer --> router --> Modem: You may have to change your settings on the Router to use 8.8.8.8 and 8.8.4.4 for DNS. Computer -->Router/Modem(1 device that is both router and modem): You will need to change it on this device to use 8.8.8.8 and 8.8.4.4. The new segatools might help this, but have heard mixed issues with it so this is one of the fixes.

Just to let you know. The updates only have minor changes to Initial D Zero, it is mostly changes to other games using this as well. Minime v008 Changelog: Implement "Auras" in IDZ - I believe there was an issue with auras and how they worked saving onto the card? I am not 100% sure about this, but apparently it works with minime v008. Segatools v003 Changelog: Add countermeasures for the DNS-spamming to ISP - This is related to those who were having issues with changing DNS as a way to fix their connection issue. So this helps alleviate the issue for some. Add option for single-stick steering in IDZ - This is for those who were wanting to use 100% of the stick on gamepad so it would be 100% steering on the one side, instead of it splitting 50/50. I currently have not tried these yet as I am still at work, but will try over the weekend. @Zorvo If you are receiving the JVS error, that means something in your segatools.ini for the input section near the bottom half of it where you choose xinput and dinput for device controls. Something is setup incorrectly there. Are you using a gamepad or a wheel? The Cannot connect accounting error, could be a couple of things: Access to the game files is set as read-only: so you need to make sure it is not set as read-only. Or could be relation to networking issue, Can you confirm what your internal network looks like? Computer > Ethernet Cable > Router > Ethernet cable > Modem > Internet or Computer > Ethernet Cable > Router/Modem (1 unit) > Internet or something else? @gojirien The issue with the Directional stuff is it is hardcoded in the data files, so they need to pull that information out so that it can be assigned properly, i think the reasoning is because on wheels the D-pads inputs are not technically the same as how xinput takes them. So i think it is harder to implement that way. Unsure of when they can produce a change or be able to do this or if possible. I don't develop this but am trying to understand it. In the meantime I believe that if you turn the wheel, it will react the same way of moving left and right, and going down if you pull it all the way over I think. I can't recall I have not touched my wheel for a bit.

@highmanchoi Are you able to get to test menu at all? even with the error? I just want to confirm if it is booting into the game technically before it errors or if it is before it connects. If it has an issue, you can try the Read-only thing just in case?

I am not familiar with the 8304 or 6502 error messages. I know that 8305 and 8306 are related to the value in segatools.ini for dipsw being set to 0. This should be adjusted to dipsw=1 I know 6503 and 6509 are more related to the card system, either minime is not running or there is an error for it. Need to make sure minime start.bat is running and working as well. Maybe this will help on troubleshooting issue, as they could be related, even though the error is different numbers.

The latest version of minime should be v7 and segatools should be v2 still. Versus play is still not working. unsure of what you mean by 50% steering on both sticks? is this in relation to a wheel you have setup? is it only working only on one side? Sorry, trying to understand that last part of question.

No need to plug in directly. I just wanted to see how many layers before it hits the Internet. Have you attempted the DNS change on your computer's network adapter settings to use Primary: 8.8.8.8 and Alternate 8.8.4.4?

8008 Error indicates that there is an authentication error with ALL.Net. It would be related to your IP Address set or internal network. How is your internal network setup? Computer via ethernet to router, router via ethernet to Modem, modem to Internet connection? or is it Computer via ethernet to router/modem (one unit), router/modem to Internet? I am just curious as it might be related to something on the lines of the DNS being or needing adjusting, as well as confirming IP Address.

Yes, if you safely exit after creating the card. The next time press enter to show the card, it should use that same card that was created. If you wish to create a new one, you will have to rename C:\SDDF_1.31.00\app\package\DEVICE\felica.txt, this will generate a new ID for your card.

@subaru052003@yahoo.com.tw I think you are having issues with permission, your screenshots are low resolution. You can try Snipping Tool to take screenshots. Can you make sure the C:\SDFF_1.31.00\ folder is not read only? I have not seen that one specifically so make sure that you can access the amdaemon.exe.

Are you on Windows 7?

Try this, remove ; infront of subnet and change it to subnet=172.20.10.0

May need more information, that error can be a couple of things. 1. Permissions on your game folder is read-only. Make sure you make it not read-only. 2. before you get the accounting error text over and over again, you should have a bunch of stuff running. Can you take screenshot of everything before the Cannot get accounting info..... 3. Getting that info before that error will provide the initial error message. 4. What version of Windows are you on, Windows 10 build 1903? Update: I saw your other post on main thread. I saw the error. looks like Error 800, that means IP Address and or subnet is incorrect in your Segatools.ini, if you could please post your segatools, and confirm IP Address?

that is the same error, the 0919 is the same as 919. If you have a DVD, you need to disable it because the game see's it is enabled, it will not run. If you have a Virtual Drive for mounting ISO/images, you need to disable that since it is the same as a DVD drive. Commonly used is Daemontools or clonedvd. with virtual drive, you need ti disable it via the software. Steps to disable DVD drive You need to disable your DVD drive. The system does not like it being enabled. Go to Start > type: device manager > Find your DVD Drive, right click it, and choose disable. After you disable it, rerun and that error should be gone. Disable this first then run start.bat and see if you get further.

That first error indicates that it is either installed already or you are getting permission denied on accessing port 80 on your machine. Are you running any website from your machine as well? If not is this when you do it from scratch? or following steps overwriting old stuff? Try running start.bat from minime with admin? That 2nd part about the clicking on screen. Whenever you move your focus or click elsewhere, the screen goes black. That is normal for this game sadly. So usually leave the window alone, since it always brings that window upfront, I just leave it as is and let it load.

I am not sure I understand? Is it working, but you get that error 0919? If you get that error, please follow the steps I provided to gojirien to fix that issue. If it is not a real DVD drive, and a virtual one. Just disable the virtual drive.

Press start on controller. Press and hold the "Enter" key on the keyboard. Once the card is created, then to exit properly: Press 1 on keyboard, then press 2 on the keyboard to navigate the menu, navigate to "System Test Menu" and then Press 1 again to accept. Select yes in next screen. This will exit the game properly.

Can't see what you mean... Too small of image. @gojirien You need to disable your DVD drive. The system does not like it being enabled. Go to Start > type: device manager > Find your DVD Drive, right click it, and choose disable. After you disable it, rerun and that error should be gone.

@garfield63 I don't think that can be changed as far as I understand, it is hardcoded in segatools.ini. Maybe in a later version it might be available, but at the moment it is not. @payarx Do you get the other small Direct 3D window with the All.Net stuff as well or does that not even load up? I assume that it is failing before this. Could you post the info from the command prompt that injects all the data?

you can possibly do it, if you have a controller and use something like this? https://www.howtogeek.com/404214/how-to-remap-any-controller-to-keyboard-keys-on-windows-and-macos/ Not sure if you can set it up normally though.

Nice game. Very hard with low reaction time on the moves, but still fun. Cool game. Will have to play it some more later =)

Cool, glad that worked, yea I wasn't sure what buttons people use so that was just base.

Try this possibly? Someone had used it before but I don't have a G27 but I believe this may work, you can check and confirm by confirming the keys. [dinput] ; Name of the DirectInput wheel to use (or any text that occurs in its name) ; Example: TMX ; ; If this is left blank then the first DirectInput device will be used. deviceName=G27 ; Name of the positional shifter to use (or any subset thereof). ; Leave blank if you do not have a positional shifter; a positional shifter ; will be simulated using the configured Shift Down and Shift Up buttons ; in this case. ; ; Can be the same device as the wheel. ; ; Example: T500 shifterName=G27 ; Pedal mappings. Valid axis names are: ; ; X, Y, Z, RX, RY, RZ, U, V ; ; (U and V are old names for Slider 1 and Slider 2). ; The examples below are valid for a Thrustmaster TMX. brakeAxis=RZ accelAxis=Y ; DirectInput button numbers to map to menu inputs. Note that buttons are ; numbered from 1; some software numbers buttons from 0. start=18 viewChg=16 ; Button mappings for the simulated six-speed shifter. ;shiftDn=1 ;shiftUp=2 ; Button mappings for the positional shifter, if present. gear1=9 gear2=10 gear3=11 gear4=12 gear5=13 gear6=14 Some of this might be off, so please try this and or confirm the numbers to see if it works.

You can do it. You have to adjust values in segatools.ini, where you change it to dinput and then label the device name. I know it does work, and can use it. You should enter the device name that comes up and shifter name. Like G27 and stuff for Logitech. The buttons are labelled based on what buttons and commands they equal to. I am going to test my Driving Force GT.

@dotexe Try setting inject.exe to run as administrator, right click, properties, compatibility tab, check Run as Administrator. Run start.bat as normal and see if that fixes it. If it works after that, then you can close down and remove what you just did on Inject.exe, then run the game as normal.

You just need to do it once. It will always do that, but the files are cleared. Don't worry. just do it once and it should be good.