I have tried to launch Initial D Zero ver. 2 on Teknoparrot, but it stuck at "Clock: Returning JST timezone" on start.bat and black screen on Direct3D window.
Does anyone have the same experience and how to fix?
NodeJS, Microsoft Visual C++ 2010, Direct X, Microsoft .NET Framework installed, IP address set.
Minime in SegaTools, status OK, but when I launch the game it stuck at "Clock: Returning JST timezone", can't even get the error code but only black screen on Direct3D window.
Specs
MB h610M-ITX/ac
CPU i3-12100F 3.30 GHz
RAM 16GB (8GB*2) PC3200 DDR4
GFX MSI RTX 3060 12GB
Windows 11 64-bit operating system
Log as follows:
C:\TeknoParrot\SegaTools\minime>start.bat
--- Begin idz_pre_startup ---
Vfs: WARNING: OPTION path not specified in INI file
--- End idz_pre_startup ---
--- Begin idz_pre_startup ---
Vfs: WARNING: OPTION path not specified in INI file
--- End idz_pre_startup ---
--- Begin idz_pre_startup ---
amdaemonExe Ver.2587 Build:Nov 9 2018 11:33:37
SetupAPI: Interface {741b5fca-...} -> Device node $sram
SRAM: Open device
Vfs: WARNING: OPTION path not specified in INI file
--- End idz_pre_startup ---
SRAM: Get geometry
SetupAPI: Interface {b7970f0c-...} -> Device node $eeprom
EEPROM: Open device
EEPROM: Get geometry
SetupAPI: Interface {279a9f67-...} -> Device node $ds
DS: Open device
DS: Get geometry
DS: Setup IOCTL
SetupAPI: Interface {e9a26688-...} -> Device node $gpio
GPIO: Open device
GPIO: Describe GPIO ports
Process state: setup Game Mode
Security: Opened handle
DS: Read sector 00000000
Inid_Crypt::Inid_Crypt()Inid_Crypt::Inid_Crypt()Security: nusec_ioctl_get_nvram_geometry
--- Begin idz_pre_startup ---
Vfs: WARNING: OPTION path not specified in INI file
--- End idz_pre_startup ---
Game processes have terminated
Press any key to continue . . . Security: nusec_ioctl_get_nearfull
app:switchboard HOST_EXT: 127.0.0.1 (Service host name sent to clients) +0ms
app:switchboard HOST_INT: 0.0.0.0 (Bind address) +1ms
app:switchboard Using default host names, change them from the .env file if necessary. +0ms
Hwmon: Opened device
AmVideo: amDllVideoOpen
AmVideo: amDllVideoSetResolution
AmVideo: amDllVideoClose
Netenv: GetAdaptersInfo: Virtualized LAN configuration:
Netenv: Interface IP : 192.168. 50. 11
Netenv: Router IP : 192.168. 50.254
Netenv: MAC Address : 01:02:03:04:05:06
Netenv: GetAdaptersInfo: Virtualized LAN configuration:
Netenv: Interface IP : 192.168. 50. 11
Netenv: Router IP : 192.168. 50.254
Netenv: MAC Address : 01:02:03:04:05:06
Netenv: GetAdaptersInfo: Virtualized LAN configuration:
Netenv: Interface IP : 192.168. 50. 11
Netenv: Router IP : 192.168. 50.254
Netenv: MAC Address : 01:02:03:04:05:06
SetupAPI: Interface {db6bbb45-...} -> Device node $jvs
JVS Port: Open device
JVS I/O: Starting Initial D Zero backend DLL
TeknoParrot SegaTools Support by nzgamer41
Using Shift Up and Down!
Using TeknoParrot Input Support
JVS Port: Port startup (?)
EEPROM: Read off 1f0 len 30
EEPROM: Read off 90 len b0
JVS I/O: Reset (param d9)
EEPROM: Read off 40 len 50
Startup OK
Error 0
NFC Assembly: Starting backend DLL
NFC 00: Unimpl command 61
NFC 00: Reset
JVS I/O: Reset (param d9)
JVS Port: Sense line 2.5 V (address unassigned)
JVS I/O: Assign addr 01 sense 0
JVS Port: Sense line 0.0 V (address assigned)
JVS I/O: Get features
JVS I/O: Get command format version
JVS I/O: Get JVS version
JVS I/O: Get communication version
JVS I/O: Read ID
Netenv: GetBestRoute ip4 0 -> ip4 0
Process state: Advertise
Clock: Returning JST timezone
